🇵🇱 Polska Spółka Gazownictwa Sp. z o.o. PL

PCA AP 017 • Warszawa, Poland • 51 calibration items

Metrology & calibration

Polska Spółka Gazownictwa Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 017 (Warszawa, Poland). Its accreditation scope covers 51 calibration items in the following areas: Metrology & calibration. Calibrated items include: Pressure measuring chains, Pressure transmitters, Multimeters, Calibrators. Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; Outside of permanent location (P), Internal procedure; Direct method; At permanent location (S).

At a glance

  • Accreditation number: PCA AP 017
  • Calibration items in scope: 51
  • Types of calibrated items: 40
  • Calibration principles used: 3
  • City: Warszawa, Poland
  • Valid until: 28-12-2027
Accreditation number
AP 017
Accreditation body
PCA
Address
ul. Krucza 6/14, 00-537 Warszawa
City
Warszawa, Poland
Division
Support Branch in Warsaw
Valid until
28-12-2027

What this laboratory calibrates (40)

Calibration principles (3)

Certificate information

Issue date
08.01.2026
Issue no.
23
Certificate date
08.01.2026
Accreditation cycle
29.11.2023 — 28.12.2027
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (51)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. A CMC uncertainty value expressed as a percentage is the relative measurement uncertainty and refers to the percentage of the value of the measurand.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Calibrators
Digital voltmeters
Multimeters
Calibration — DC voltage
10 µV to 1 mV · CMC 0,15 µV 1 mV to 200 mV · CMC 0,0008 % 200 mV to 20 V · CMC 0,0004 % 20 V to 200 V · CMC 0,0005 % 200 V to 1000 V · CMC 0,0006 %
DC voltage
Internal procedure; Direct method; At permanent location (S) Internal procedure PW PBP/p 29 based on EURAMET cg-15 v.3.0
2 Calibrators
Digital ammeters
Multimeters
Gas volume converters
Calibration — DC current
10 µA to 200 µA · CMC 0,008 % 0,2 mA to 20 mA · CMC 0,004 % 20 mA to 200 mA · CMC 0,006 % 200 mA to 2 A · CMC 0,02 % 2 A to 10 A · CMC 0,057 %
DC current
Internal procedure; Direct method; At permanent location (S) Internal procedure PW PBP/p 29 based on EURAMET cg-15 v.3.0
3 Calibrators
Digital voltmeters
Multimeters
Calibration — AC voltage
10 Hz to 40 Hz — 1 mV to 20 mV · CMC 0,04 % 10 Hz to 40 Hz — 20 mV to 200 mV · CMC 0,03 % 10 Hz to 40 Hz — 200 mV to 20 V · CMC 0,014 % 10 Hz to 40 Hz — 20 V to 200 V · CMC 0,04 % 40 Hz to 100 Hz — 1 mV to 20 mV · CMC 0,04 % 40 Hz to 100 Hz — 20 mV to 200 mV · CMC 0,03 % 40 Hz to 100 Hz — 200 mV to 200 V · CMC 0,012 % 40 Hz to 100 Hz — 200 V to 1000 V · CMC 0,02 % 100 Hz to 2 kHz — 1 mV to 20 mV · CMC 0,03 % 100 Hz to 2 kHz — 20 mV to 200 mV · CMC 0,02 % 100 Hz to 2 kHz — 200 mV to 200 V · CMC 0,01 % 100 Hz to 2 kHz — 200 V to 1000 V · CMC 0,02 % 2 kHz to 10 kHz — 1 mV to 20 mV · CMC 0,04 % 2 kHz to 10 kHz — 20 mV to 200 mV · CMC 0,02 % 2 kHz to 10 kHz — 200 mV to 2 V · CMC 0,01 % 2 kHz to 10 kHz — 2 V to 20 V · CMC 0,01 % 2 kHz to 10 kHz — 20 V to 200 V · CMC 0,01 % 2 kHz to 10 kHz — 200 V to 1000 V · CMC 0,02 % 10 Hz to 30 kHz — 1 mV to 20 mV · CMC 0,08 % 10 Hz to 30 kHz — 20 mV to 200 mV · CMC 0,045 % 10 Hz to 30 kHz — 200 mV to 200 V · CMC 0,024 % 30 kHz to 100 kHz — 1 mV to 20 mV · CMC 0,2 % 30 kHz to 100 kHz — 20 mV to 200 mV · CMC 0,10 % 30 kHz to 100 kHz — 200 mV to 2 V · CMC 0,07 % 30 kHz to 100 kHz — 2 V to 20 V · CMC 0,07 %
AC voltage
Internal procedure; Direct method; At permanent location (S) Internal procedure PW PBP/p 29 based on EURAMET cg-15 v.3.0
4 Calibrators
Digital ammeters
Multimeters
Calibration — AC current
10 Hz to 10 kHz — 10 µA to 200 µA · CMC 0,06 % 10 Hz to 10 kHz — 200 µA to 2 mA · CMC 0,05 % 10 Hz to 10 kHz — 2 mA to 20 mA · CMC 0,04 % 10 Hz to 10 kHz — 20 mA to 200 mA · CMC 0,04 % 10 Hz to 5 kHz — 200 mA to 2 A · CMC 0,1 % 45 Hz to 1 kHz — 2 A to 10 A · CMC 0,14 %
AC current
Internal procedure; Direct method; At permanent location (S) Internal procedure PW PBP/p 29 based on EURAMET cg-15 v.3.0
5 Fixed resistors
Variable resistors
Resistance standards
Calibration — DC resistance
1 mΩ to 100 mΩ · CMC 0,0003 ∙ R + 0,004 mΩ 100 mΩ to 2 Ω · CMC 0,01 % 2 Ω to 25 Ω · CMC 0,004 % 25 Ω to 2 kΩ · CMC 0,002 % 2 kΩ to 200 kΩ · CMC 0,0022 % 200 kΩ to 20 MΩ · CMC 0,0036 % 20 MΩ to 200 MΩ · CMC 0,017 % 200 MΩ to 2 GΩ · CMC 0,3 %
DC resistance
Internal procedure; At permanent location (S) Internal procedure PW PBP/p 24
6 Multimeters
Digital ohmmeters
Resistance calibrators
Calibration — DC resistance
1 mΩ to 100 mΩ · CMC 0,0003 ∙ R + 0,004 mΩ 100 mΩ to 2 Ω · CMC 0,01 % 2 Ω to 25 Ω · CMC 0,004 % 25 Ω to 2 kΩ · CMC 0,002 % 2 kΩ to 200 kΩ · CMC 0,0022 % 200 kΩ to 20 MΩ · CMC 0,0036 % 20 MΩ to 200 MΩ · CMC 0,017 % 200 MΩ to 2 GΩ · CMC 0,3 %
DC resistance
Internal procedure; Direct method; At permanent location (S) Internal procedure PW PBP/p 29 based on EURAMET cg-15 v.3.0
7 Temperature indicators (meters), including temperature controllers
Temperature simulators
Calibration — Electrical simulation of quantities
J — -270 °C to 1820 °C · CMC 0,07 °C 2) K — -270 °C to 1820 °C · CMC 0,08 °C 2) T — -270 °C to 1820 °C · CMC 0,07 °C 2) S — -270 °C to 1820 °C · CMC 0,07 °C 2) N — -270 °C to 1820 °C · CMC 0,07 °C 2) E — -270 °C to 1820 °C · CMC 0,07 °C 2) B — -270 °C to 1820 °C · CMC 0,07 °C 2) R — -270 °C to 1820 °C · CMC 0,06 °C 2)
Electrical simulation of quantities
Internal procedure; At permanent location (S) Internal procedure PW PBP/p 30
8 Temperature indicators (meters), including temperature controllers Calibration — Electrical simulation of quantities
-200 °C to 850 °C · CMC 0,010 °C 2)
Electrical simulation of quantities
Internal procedure; At permanent location (S) Internal procedure PW PBP/p 30
9 Temperature simulators Calibration — Electrical simulation of quantities
-200 °C to 850 °C · CMC 0,010 °C 2)
Electrical simulation of quantities
Internal procedure; At permanent location (S) Internal procedure PW PBP/p 30
10 Temperature transmitters Calibration — Electrical simulation of quantities
-200 °C to 850 °C · CMC 0,010 °C 2)
Electrical simulation of quantities
Internal procedure; At permanent location (S) Internal procedure PW PBP/p 30
11 Pressure transmitters
Electronic pressure gauges
Pressure measuring chains
Calibration — Pressure
- gauge pressure — -1 bar to -0,1 bar · CMC 1,1 ∙ 10⁻⁴ ∙ p - gauge pressure — -0,1 bar to -0,03 bar · CMC 0,04 mbar - gauge pressure — -0,03 bar to 0 bar · CMC 0,06 mbar - gauge pressure — 0,0002 bar to 0,005 bar · CMC 0,0036 mbar - gauge pressure — 0,005 bar to 0,015 bar · CMC 4 ∙ 10⁻⁴ ∙ p - gauge pressure — 0,015 bar to 0,025 bar · CMC 0,003 mbar - gauge pressure — 0,025 bar to 0,080 bar · CMC 1,1 ∙ 10⁻⁴ ∙ p - gauge pressure — 0,080 bar to 500 bar · CMC 6 ∙ 10⁻⁵ ∙ p
Pressure
Internal procedure; At permanent location (S) Internal procedure PW PPC/c 3 based on EURAMET cg-17 v.4.1
12 Pressure transmitters
Electronic pressure gauges
Pressure measuring chains
Calibration — Pressure
- absolute pressure — 0,01 bar to 0,04 bar · CMC 0,018 kPa - absolute pressure — 0,04 bar to 500 bar · CMC 6 ∙ 10⁻⁵ ∙ p
Pressure
Internal procedure; At permanent location (S) Internal procedure PW PPC/c 3 based on EURAMET cg-17 v.4.1
13 Pressure transmitters
Pressure measuring chains
Calibration — Pressure
- gauge pressure — -1 bar to -0,1 bar · CMC 0,6 mbar - gauge pressure — -0,1 bar to 0 bar · CMC 0,06 mbar - gauge pressure — 0,0002 bar to 0,005 bar · CMC 0,0039 mbar - gauge pressure — 0,005 bar to 0,015 bar · CMC 5 ∙ 10⁻⁴ ∙ p - gauge pressure — 0,015 bar to 0,025 bar · CMC 0,004 mbar - gauge pressure — 0,025 bar to 50 bar · CMC 1,4 ∙ 10⁻⁴ ∙ p - gauge pressure — 50 bar to 500 bar · CMC 1,3 ∙ 10⁻⁴ ∙ p
Pressure
Internal procedure; Outside of permanent location (P) Internal procedure PW PPC/c 4 based on EURAMET cg-17 v.4.1
14 Pressure transmitters
Pressure measuring chains
Calibration — Pressure
- absolute pressure — 0,75 bar to 1,15 bar · CMC 0,19 mbar - absolute pressure — 1,15 bar to 4,5 bar · CMC Q [0,16 mbar; 1,4 ∙10⁻⁴ ∙p] - absolute pressure — 4,5 bar to 501 bar · CMC 1,3 ∙ 10⁻⁴ ∙ p
Pressure
Internal procedure; Outside of permanent location (P) Internal procedure PW PPC/c 4 based on EURAMET cg-17 v.4.1
15 Pressure transmitters
Pressure measuring chains
Calibration — Pressure
- differential pressure; at a static pressure of 10 bar to 200 bar — 0 bar to 4,9 bar · CMC 0,1 mbar + 1,5 ∙ 10⁻⁴ ∙ p
Pressure
Internal procedure; At permanent location (S) Internal procedure PW PPC/c 3 based on EURAMET cg-17 v.4.1
16 Pressure transmitters
Pressure measuring chains
Calibration — Pressure
- differential pressure; at a static pressure of 10 bar to 200 bar — 0 bar to 4,9 bar · CMC 0,2 mbar + 2 ∙ 10⁻⁴ ∙ p
Pressure
Internal procedure; Outside of permanent location (P) Internal procedure PW PPC/c 4 based on EURAMET cg-17 v.4.1
17 Electrical thermometers (including electronic) Calibration — Temperature (electrical thermometry)
-30 °C to 250 °C · CMC 0,02 °C
Temperature (electrical thermometry)
Internal procedure; At permanent location (S) Internal procedure PW PBP/p 27
18 Electrical thermometers (including electronic) Calibration — Temperature (electrical thermometry)
-0,5 °C to 50 °C · CMC 0,05 °C
Temperature (electrical thermometry)
Internal procedure; Outside of permanent location (P) Internal procedure PW PBP/p 27
19 Resistance thermometer sensors Calibration — Temperature (electrical thermometry)
-30 °C to 100 °C · CMC 0,010 °C 100 °C to 180 °C · CMC 0,013 °C 180 °C to 250 °C · CMC 0,016 °C
Temperature (electrical thermometry)
Internal procedure; At permanent location (S) Internal procedure PW PBP/p 25
20 Turbine gas meters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 16 m³/h 1) · CMC 0,20 % 0,1 m³/h to 160 m³/h 1) · CMC 0,20 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/sd 1
21 Turbine gas meters Calibration — Volume flow rate (flow - gases)
0,16 m³/h to 6500 m³/h 1) · CMC 0,35 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/gt 1
22 Rotary gas meters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 16 m³/h 1) · CMC 0,20 % 0,1 m³/h to 160 m³/h 1) · CMC 0,20 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/sd 1
23 Rotary gas meters Calibration — Volume flow rate (flow - gases)
1,31 m³/h to 283 m³/h 1) · CMC 0,37 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/gr 1
24 Diaphragm gas meters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 16 m³/h 1) · CMC 0,20 % 0,1 m³/h to 160 m³/h 1) · CMC 0,20 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/sd 1
25 Drum gas meters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 16 m³/h 1) · CMC 0,20 % 0,1 m³/h to 160 m³/h 1) · CMC 0,20 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/sd 1
26 Rotameters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 16 m³/h · CMC 0,35 % 0,1 m³/h to 160 m³/h · CMC 0,35 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/rt 1
27 Turbine flowmeters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 16 m³/h · CMC 0,20 % 0,0192 kg/h to 19,2 kg/h · CMC 0,20 % 0,1 m³/h to 160 m³/h · CMC 0,20 % 0,12 kg/h to 192 kg/h · CMC 0,20 % 0,16 m³/h to 6500 m³/h · CMC 0,35 % 0,192 kg/h to 7800 kg/h · CMC 0,35 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
28 Rotary flowmeters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 16 m³/h 1) · CMC 0,20 % 0,0192 kg/h to 19,2 kg/h · CMC 0,20 % 0,1 m³/h to 160 m³/h 1) · CMC 0,20 % 0,12 kg/h to 192 kg/h · CMC 0,20 % 1,31 m³/h to 283 m³/h 1) · CMC 0,37 % 1,572 kg/h to 339,6 kg/h · CMC 0,37 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
29 Diaphragm flowmeters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 16 m³/h 1) · CMC 0,25 % 0,0192 kg/h to 19,2 kg/h · CMC 0,25 % 0,1 m³/h to 160 m³/h 1) · CMC 0,25 % 0,12 kg/h to 192 kg/h · CMC 0,25 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
30 Ultrasonic flowmeters Calibration — Volume flow rate (flow - gases)
20 m³/h to 160 m³/h · CMC 0,40 % 24 kg/h to 192 kg/h · CMC 0,40 % 160 m³/h to 6500 m³/h · CMC 0,50 % 192 kg/h to 7800 kg/h · CMC 0,50 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
31 Differential pressure flowmeters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 6500 m³/h · CMC 0,30 % 0,0192 kg/h to 7800 kg/h · CMC 0,30 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
32 Vortex flowmeters Calibration — Volume flow rate (flow - gases)
1 m³/h to 16 m³/h · CMC 0,80 % 1,2 kg/h to 19,2 kg/h · CMC 0,80 % 16 m³/h to 160 m³/h · CMC 0,60 % 19,2 kg/h to 192 kg/h · CMC 0,60 % 160 m³/h to 6500 m³/h · CMC 0,50 % 192 kg/h to 7800 kg/h · CMC 0,50 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
33 Thermal mass flowmeters Calibration — Volume flow rate (flow - gases)
0,25 m³/h to 16 m³/h · CMC 0,30 % 0,3 kg/h to 19,2 kg/h · CMC 0,30 % 16 m³/h to 160 m³/h · CMC 0,30 % 19,2 kg/h to 192 kg/h · CMC 0,30 % 160 m³/h to 1300 m³/h · CMC 0,30 % 192 kg/h to 1560 kg/h · CMC 0,30 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
34 Bubble flowmeters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 0,36 m³/h · CMC 0,50 % 0,0192 kg/h to 0,432 kg/h · CMC 0,50 % 0,36 m³/h to 1,8 m³/h · CMC 0,30 % 0,432 kg/h to 2,16 kg/h · CMC 0,30 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
35 Aspirators Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 0,036 m³/h · CMC 0,90 % 0,0192 kg/h to 0,0432 kg/h · CMC 0,90 % 0,036 m³/h to 0,25 m³/h · CMC 0,40 % 0,0432 kg/h to 0,3 kg/h · CMC 0,40 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
36 Dust samplers Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 0,36 m³/h · CMC 0,80 % 0,0192 kg/h to 0,432 kg/h · CMC 0,80 % 0,36 m³/h to 12,0 m³/h · CMC 0,60 % 0,432 kg/h to 14,4 kg/h · CMC 0,60 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pm 1
37 Turbine flow transmitters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 160 m³/h 1) · CMC 0,20 % 0,0192 kg/h to 192 kg/h · CMC 0,20 % 0,15 m³/h to 6500 m³/h · CMC 0,35 % 0,18 kg/h to 7800 kg/h · CMC 0,35 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pp 1
38 Rotary flow transmitters Calibration — Volume flow rate (flow - gases)
0,016 m³/h to 160 m³/h 1) · CMC 0,20 % 0,0192 kg/h to 192 kg/h · CMC 0,20 % 1,31 m³/h to 283 m³/h 1) · CMC 0,37 % 1,572 kg/h to 339,6 kg/h · CMC 0,37 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pp 1
39 Ultrasonic flow transmitters Calibration — Volume flow rate (flow - gases)
20 m³/h to 160 m³/h · CMC 0,40 % 24 kg/h to 192 kg/h · CMC 0,40 % 160 m³/h to 6500 m³/h · CMC 0,50 % 192 kg/h to 7800 kg/h · CMC 0,50 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pp 1
40 Vortex flow transmitters Calibration — Volume flow rate (flow - gases)
1 m³/h to 16 m³/h · CMC 0,80 % 1,2 kg/h to 19,2 kg/h · CMC 0,80 % 16 m³/h to 160 m³/h · CMC 0,60 % 19,2 kg/h to 192 kg/h · CMC 0,60 % 160 m³/h to 6500 m³/h · CMC 0,50 % 192 kg/h to 7800 kg/h · CMC 0,50 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pp 1
41 Thermal mass flow transmitters Calibration — Volume flow rate (flow - gases)
0,25 m³/h to 16 m³/h · CMC 0,30 % 0,3 kg/h to 19,2 kg/h · CMC 0,30 % 16 m³/h to 160 m³/h · CMC 0,30 % 19,2 kg/h to 192 kg/h · CMC 0,30 % 160 m³/h to 1300 m³/h · CMC 0,30 % 192 kg/h to 1560 kg/h · CMC 0,30 %
Volume flow rate (flow - gases)
Internal procedure; At permanent location (S) Internal procedure PW PPO/pp 1
42 Turbine flowmeters Calibration — Volume flow rate (flow - gases)
1,31 m³/h to 283 m³/h · CMC 0,42 % 1,572 kg/h to 339,6 kg/h · CMC 0,42 % 283 m³/h to 1000 m³/h · CMC 0,42 % 339,6 kg/h to 1200 kg/h · CMC 0,42 %
Volume flow rate (flow - gases)
Internal procedure; Outside of permanent location (P) Internal procedure PW PPO/pm 1
43 Ultrasonic flowmeters Calibration — Volume flow rate (flow - gases)
1,31 m³/h to 283 m³/h · CMC 0,42 % 1,572 kg/h to 339,6 kg/h · CMC 0,42 % 283 m³/h to 1000 m³/h · CMC 0,42 % 339,6 kg/h to 1200 kg/h · CMC 0,42 %
Volume flow rate (flow - gases)
Internal procedure; Outside of permanent location (P) Internal procedure PW PPO/pm 1
44 Differential pressure flowmeters Calibration — Volume flow rate (flow - gases)
1,31 m³/h to 283 m³/h · CMC 0,42 % 1,572 kg/h to 339,6 kg/h · CMC 0,42 % 283 m³/h to 1000 m³/h · CMC 0,42 % 339,6 kg/h to 1200 kg/h · CMC 0,42 %
Volume flow rate (flow - gases)
Internal procedure; Outside of permanent location (P) Internal procedure PW PPO/pm 1
45 Thermal mass flowmeters Calibration — Volume flow rate (flow - gases)
1,31 m³/h to 283 m³/h · CMC 0,42 % 1,572 kg/h to 339,6 kg/h · CMC 0,42 % 283 m³/h to 1000 m³/h · CMC 0,42 % 339,6 kg/h to 1200 kg/h · CMC 0,42 %
Volume flow rate (flow - gases)
Internal procedure; Outside of permanent location (P) Internal procedure PW PPO/pm 1
46 Turbine flow transmitters Calibration — Volume flow rate (flow - gases)
1,31 m³/h to 283 m³/h · CMC 0,42 % 1,572 kg/h to 339,6 kg/h · CMC 0,42 % 283 m³/h to 1000 m³/h · CMC 0,42 % 339,6 kg/h to 1200 kg/h · CMC 0,42 %
Volume flow rate (flow - gases)
Internal procedure; Outside of permanent location (P) Internal procedure PW PPO/pp 1
47 Rotary flow transmitters Calibration — Volume flow rate (flow - gases)
1,31 m³/h to 283 m³/h · CMC 0,42 % 1,572 kg/h to 339,6 kg/h · CMC 0,42 % 283 m³/h to 1000 m³/h · CMC 0,42 % 339,6 kg/h to 1200 kg/h · CMC 0,42 %
Volume flow rate (flow - gases)
Internal procedure; Outside of permanent location (P) Internal procedure PW PPO/pp 1
48 Ultrasonic flow transmitters Calibration — Volume flow rate (flow - gases)
1,31 m³/h to 283 m³/h · CMC 0,42 % 1,572 kg/h to 339,6 kg/h · CMC 0,42 % 283 m³/h to 1000 m³/h · CMC 0,42 % 339,6 kg/h to 1200 kg/h · CMC 0,42 %
Volume flow rate (flow - gases)
Internal procedure; Outside of permanent location (P) Internal procedure PW PPO/pp 1
49 Vortex flow transmitters Calibration — Volume flow rate (flow - gases)
1,31 m³/h to 283 m³/h · CMC 0,42 % 1,572 kg/h to 339,6 kg/h · CMC 0,42 % 283 m³/h to 1000 m³/h · CMC 0,42 % 339,6 kg/h to 1200 kg/h · CMC 0,42 %
Volume flow rate (flow - gases)
Internal procedure; Outside of permanent location (P) Internal procedure PW PPO/pp 1
50 Transmitters
Hygrometers
Calibration — Dew-point temperature
-50 °C to 20 °C · CMC 0,5 °C
Dew-point temperature
Internal procedure; At permanent location (S) Internal procedure PW PFC/pr 2
51 Transmitters
Hygrometers
Calibration — Dew-point temperature
-30 °C to 10 °C · CMC 0,6 °C
Dew-point temperature
Internal procedure; Outside of permanent location (P) Internal procedure PW PFC/pr 1

Reference standards (17)

EURAMET cg-15 v.3.0
EURAMET cg-17 v.4.1
PW PBP/p 24
PW PBP/p 25
PW PBP/p 27
PW PBP/p 29
PW PBP/p 30
PW PFC/pr 1
PW PFC/pr 2
PW PPC/c 3
PW PPC/c 4
PW PPO/gr 1
PW PPO/gt 1
PW PPO/pm 1
PW PPO/pp 1
PW PPO/rt 1
PW PPO/sd 1

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20017