🇵🇱 „EKO-LAB” Sp. z o.o. PL
EnvironmentWater & wastewaterMaterials & polymers
„EKO-LAB” Sp. z o.o. is a laboratory accredited by PCA under number AB 940 (Wałbrzych, Poland). Its accreditation scope covers 194 test methods in the following areas: Environment, Water & wastewater, Materials & polymers. Test objects include: Waste gases, Workplace environment − air, Water, wastewater, Waste gases - waste gas samples collected on a filter and into abso…. Most frequently used techniques: Flame atomic absorption spectrometry (FAAS), Gas chromatography with flame ionization detection (GC-FID), Spectrophotometric method.
At a glance
- Accreditation number: PCA AB 940
- Methods in scope: 194
- Types of test objects: 18
- Techniques used: 27
- City: Wałbrzych, Poland
- Accreditation number
- AB 940
- Accreditation body
- PCA
- Address
- ul. Beethovena 1, 58-300 Wałbrzych
- City
- Wałbrzych, Poland
What this laboratory tests (18)
- Waste gases — 83 methods
- Workplace environment − air — 38 methods
- Water, wastewater — 19 methods
- Waste gases - waste gas samples collected on a filter and into absorbing solution — 14 methods
- Workplace environment − air samples collected on sorbent tubes, General environment - waste gas samples collected on sorbent tubes — 8 methods
- Workplace environment − noise — 6 methods
- Workplace environment − noise (selection of hearing protectors) — 4 methods
- Workplace environment − whole-body vibration — 4 methods
- General environment − noise from installations, or equipment and industrial plants — 2 methods
- Wastewater — 2 methods
- Water intended for consumption — 2 methods
- Workplace environment − cold microclimate — 2 methods
- Workplace environment − hand-arm vibration — 2 methods
- Workplace environment − hot microclimate — 2 methods
- Workplace environment − indoor electric lighting — 2 methods
- and 3 more
Analytical techniques used (27)
- Flame atomic absorption spectrometry (FAAS) — 41 methods
- Gas chromatography with flame ionization detection (GC-FID) — 29 methods
- Spectrophotometric method — 16 methods
- Direct measurement method — 9 methods
- Gravimetric method — 7 methods
- Electrochemical method — 4 methods
- Non-dispersive infrared spectrometry NDIR — 3 methods
- Chemiluminescence method — 2 methods
- Potentiometric method — 2 methods
- Anemometric method — 1 method
- Aspiration method using absorption tubes — 1 method
- Aspiration method using activated carbon/ silica gel/ absorbing solutions — 1 method
- Cold vapour atomic absorption spectrometry (CVAAS) — 1 method
- Condensation-adsorption method; Temperature method — 1 method
- Conductometric method — 1 method
- and 12 more
Accreditation scope — test methods (194)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Workplace environment − air | Sampling for assessment of occupational exposure to: − dust agents inhalable fraction respirable fraction − organic substances, including inhalable fraction − inorganic substances, including inhalable fraction respirable fraction thoracic fraction − metals and their compounds, including inhalable fraction respirable fraction asbestos − respirable fibres man-made mineral fibres excluding refractory ceramic fibres − respirable fibres fibrous silicon carbide − respirable fibres |
Personal dosimetry method | PN-Z-04008-7:2002+Az1:2004 | |
| 2 | Workplace environment − air | Sampling for occupational exposure assessment to: − organic substances − inorganic substances | Personal dosimetry method; Stationary method | PN-Z-04008-7:2002+Az1:2004 | |
| 3 | Workplace environment − air | Exposure index (calculated) | PN-Z-04008-7:2002+Az1:2004 | ||
| 4 | Workplace environment − air | Concentration/content of the respirable fraction crystalline silica (quartz, cristobalite) Range (0,007 - 0,5) mg/m3 Range (0,007 - 0,40) mg w próbce |
Fourier transform infrared spectrometry method FT-IR | PiMOŚP 2012 nr 4 (74) s.117-130 | |
| 5 | Workplace environment − air | Concentration of nitrogen monoxide and nitrogen dioxide NO (0,14 - 17,77) mg/m3 NO2 (0,04 - 3,55) mg/m3 |
Spectrophotometric method | P N - Z - 0 4 0 0 9 - 1 1 :2008 | |
| 6 | Workplace environment − air | Carbon monoxide concentration Range (1,17 - 117) mg/m3 |
Electrochemical method | P B-01 wydanie 4 z dnia 15.01.2014 r. | |
| 7 | Workplace environment − air | Exposure indices (calculated) | P B-01 wydanie 4 z dnia 15.01.2014 r. | ||
| 8 | Workplace environment − air | Ammonia concentration/content Range (0,23 - 46) mg/m3 Range (0,002 - 6,0) mg w próbce |
Spectrophotometric method | PN-Z-04041:1971 | PB-10 wydanie 3 z dnia 03.01.2011 r. | |
| 9 | Workplace environment − air | Chlorine concentration/content Range (0,07 - 5,0) mg/m3 |
Spectrophotometric method | PN-Z-04037-03:1975 | |
| 10 | Workplace environment − air | Concentration of harmful dust agents – inhalable fraction: Apatites and phosphorites Petroleum bitumen Portland cement Titanium dioxide Natural graphite Synthetic graphite Kaolin Amorphous and synthetic silica Wood dusts Flour dusts Dusts not classified according to toxicity Organic dusts of animal and plant origin, excluding wood and flour dusts Calcium sulfate (VI) (gypsum) Carbon black Man-made mineral fibres excluding refractory ceramic fibres Talc Coal (hard, brown) Calcium magnesium carbonate (dolomite) Silicon carbide, non-fibrous Fibrous silicon carbide Range (0,13 - 50) mg/m3 |
Gravimetric method | PN-Z-04507:2022-05 | PN-Z-04507:2022-05/Ap1:2022-08 | |
| 11 | Workplace environment − air | Concentration of harmful dust agents – respirable fraction: Apatites and phosphorites Portland cement Natural graphite Amorphous and synthetic silica Organic dusts of animal and plant origin, excluding wood and flour dusts Talc Coal (hard, brown) Range (0,09 - 7,3) mg/m3 |
Gravimetric method | PN-Z-04508:2022-05 | PN-Z-04508:2022-05/Ap1:2022-08 | |
| 12 | Workplace environment − air | Formaldehyde concentration/content Range (0,025 - 5,5) mg/m3 Range (0,0003 - 0,8) mg w próbce |
Spectrophotometric method | PN-Z-04045-02:1976 | PB-24 wydanie 2 z dnia 03.01.2011 r. | |
| 13 | Workplace environment − air | Ozone concentration Range (0,025 - 0,25) mg/ m3 |
Spectrophotometric method | PN-Z-04007-2:1994 | |
| 14 | Workplace environment − air | Concentration/content of iron oxides calculated as Fe – respirable fraction – inhalable fraction Range (0,06 - 15,0) mg/m3 Range (0,015 - 6,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04469:2025-02 | |
| 15 | Workplace environment − air | Concentration/content of manganese and its inorganic compounds – expressed as Mn inhalable fraction respirable fraction Range (0,002 - 12,0) mg/m3 Range (0,002 - 4,8) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04472:2015-10 | |
| 16 | Workplace environment − air | Concentration/content of nickel and its compounds except nickel tetracarbonyl – calculated as Ni Range (0,001 - 2,78) mg/m3 Range (0,001 - 2,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z 04502:2019-10 | |
| 17 | Workplace environment − air | Concentration/content of metallic chromium, chromium compounds: chromium (II), chromium (III), chromium (VI) – calculated as Cr. Range (0,001 - 2,3) mg/m3 Range (0,004 - 0,92) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04434:2011 | |
| 18 | Workplace environment − air | Concentration/content of copper and its inorganic compounds – calculated as Cu Range (0,005 - 2,4) mg/m3 Range (0,0002 - 0,6) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04106-3:2002 | |
| 19 | Workplace environment − air | Concentration/content of zinc oxide - calculated as Zn – inhalable fraction Range (0,04 - 8,0) mg/m3 Range (0,004 - 0,8) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04100-03:1987 | |
| 20 | Workplace environment − air | Concentration/content of lead and its inorganic compounds excluding lead (II) arsenate (V) and lead (II) chromate (VI) calculated as Pb – inhalable fraction Range (0,001 - 0,4) mg/m3 Range (0,004 - 0,2) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8518:1994 | |
| 21 | Workplace environment − air | Aluminium trioxide concentration/content – calculated as Al: inhalable fraction respirable fraction Range (0,006 - 2,22) mg/m3 Range (0,004 - 1,6) mg w próbce metallic aluminium, aluminium powder (non-stabilised): inhalable fraction respirable fraction Range (0,006 - 2,22) mg/m3 Range (0,004 - 1,6) mg w próbce aluminium hydroxide – calculated as Al: inhalable fraction respirable fraction Range (0,006 - 2,22) mg/m3 Range (0,004 - 1,6) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04263-1:2012 | |
| 22 | Workplace environment − air | Concentration/content of tin and its inorganic compounds except stannane – calculated as Sn – inhalable fraction Range (0,06 - 12,0) mg/m3 Range (0,02 - 3,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04488:2017-10 | |
| 23 | Workplace environment − air | Concentration/content of cadmium and its inorganic compounds – calculated as Cd: inhalable fraction respirable fraction Range (0,001 - 2,5) mg/m3 Range (0,0001 - 0,5) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04102-3:2013 | |
| 24 | Workplace environment − air | Concentration/content calcium oxide inhalable fraction respirable fraction Range (0,01 - 8,74) mg/m3 Range (0,002 - 1,75) mg w próbce calcium carbonate (calculated) inhalable fraction Range (0,02 - 15,60) mg/m3 Range (0,003 - 3,12) mg w próbce calcium hydroxide (calculated) inhalable fraction respirable fraction Range (0,013 - 11,55) mg/m3 Range (0,003 - 2,31) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04442-10:2023-05 | |
| 25 | Workplace environment − moderate microclimate | Air temperature Range (-10) °C - (+30) °C Black globe temperature Range (-10) °C - (+40) °C Air humidity Range (20 - 80) % Air velocity Range (0,15 - 10) m/s |
Direct measurement method | PN-EN ISO 7730:2006+Ap2:2016-04 | |
| 26 | Workplace environment − moderate microclimate | PMV index, PPD index (calculated) | PN-EN ISO 7730:2006+Ap2:2016-04 | ||
| 27 | Workplace environment − hot microclimate | Air temperature Range (20 - 40) °C Natural wet bulb temperature Range (10 - 40) °C Black globe temperature Range (20 - 40) °C |
Direct measurement method | PN-EN ISO 7243:2018-01 +Ap2:2020-04P | |
| 28 | Workplace environment − hot microclimate | WBGT index, WBGTeff index (calculated) | PN-EN ISO 7243:2018-01 +Ap2:2020-04P | ||
| 29 | Workplace environment − cold microclimate | Air temperature Range (-20) °C - (+10) °C Black globe temperature Range (-20) °C - (+10) °C Air humidity Range (20 - 80) % Air velocity Range (0,15 - 5,0) m/s |
Direct measurement method | PN-EN ISO 11079:2008 | |
| 30 | Workplace environment − cold microclimate | IREQmin index, IREQneutral index, twc index (calculated) | PN-EN ISO 11079:2008 | ||
| 31 | Workplace environment − indoor electric lighting | Electric lighting illuminance Range (5 - 10 000) lx |
Direct measurement method | PB-22 wydanie 4 z dnia 04.02.2020 r. | |
| 32 | Workplace environment − indoor electric lighting | Uniformity of electric lighting (calculated) | PB-22 wydanie 4 z dnia 04.02.2020 r. | ||
| 33 | Workplace environment − hand-arm vibration | Root-mean-square, frequency-weighted vibration acceleration Range (0,1 - 200) m/s2 |
Direct measurement method | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015-11 | |
| 34 | Workplace environment − hand-arm vibration | Daily exposure expressed as the 8-hour energy-equivalent vector sum of the frequency-weighted RMS vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz), Exposure lasting 30 min. and less, expressed as the vector sum of the frequency-weighted RMS vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz) (calculated) | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015-11 | ||
| 35 | Workplace environment − whole-body vibration | Root-mean-square, frequency-weighted vibration acceleration Range (0,07 - 200) m/s2 |
Direct measurement method | PN-EN 14253+A1:2011 | |
| 36 | Workplace environment − whole-body vibration | Daily exposure expressed as the energy-equivalent for | PN-EN 14253+A1:2011 | ||
| 37 | Workplace environment − whole-body vibration | 8 h of exposure to the effective, frequency-weighted vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the appropriate coefficients (1.4awx, 1.4awy, awz) | PN-EN 14253+A1:2011 | ||
| 38 | Workplace environment − whole-body vibration | Exposure lasting 30 min. or less expressed as the frequency-weighted r.m.s. vibration acceleration dominant among the vibration accelerations determined for the three directional components with the appropriate factors applied (1.4awx, 1.4awy, awz) (calculated) | PN-EN 14253+A1:2011 | ||
| 39 | Workplace environment − noise | A-weighted equivalent sound pressure level | PN-N-01307:1994 | PN-EN ISO 9612:2011 z wyłączeniem metody obejmującej strategię 2 - p. 10 i strategię 3 - p. 11 | ||
| 40 | Workplace environment − noise | Maximum A-weighted sound pressure level Range (25 - 135) dB |
PN-N-01307:1994 | PN-EN ISO 9612:2011 z wyłączeniem metody obejmującej strategię 2 - p. 10 i strategię 3 - p. 11 | ||
| 41 | Workplace environment − noise | C-weighted peak sound pressure level Range (50 - 138) dB |
Direct measurement method | PN-N-01307:1994 | PN-EN ISO 9612:2011 z wyłączeniem metody obejmującej strategię 2 - p. 10 i strategię 3 - p. 11 | |
| 42 | Workplace environment − noise | Noise exposure level referred to: | PN-N-01307:1994 | PN-EN ISO 9612:2011 z wyłączeniem metody obejmującej strategię 2 - p. 10 i strategię 3 - p. 11 | ||
| 43 | Workplace environment − noise | − for an 8-h daily working time | PN-N-01307:1994 | PN-EN ISO 9612:2011 z wyłączeniem metody obejmującej strategię 2 - p. 10 i strategię 3 - p. 11 | ||
| 44 | Workplace environment − noise | − the average weekly working time (calculated) | PN-N-01307:1994 | PN-EN ISO 9612:2011 z wyłączeniem metody obejmującej strategię 2 - p. 10 i strategię 3 - p. 11 | ||
| 45 | Workplace environment − noise (selection of hearing protectors) | Equivalent sound pressure level in octave frequency bands Range (63 - 8000) Hz Range (50 - 135) dB |
PN-EN ISO 9612:2011 | PN-EN 458:2016-06 | PN-EN ISO 4869-2:2018-2 | ||
| 46 | Workplace environment − noise (selection of hearing protectors) | A-weighted equivalent sound pressure level | PN-EN ISO 9612:2011 | PN-EN 458:2016-06 | PN-EN ISO 4869-2:2018-2 | ||
| 47 | Workplace environment − noise (selection of hearing protectors) | Equivalent C-weighted sound level Range (50 - 138) dB |
Direct measurement method | PN-EN ISO 9612:2011 | PN-EN 458:2016-06 | PN-EN ISO 4869-2:2018-2 | |
| 48 | Workplace environment − noise (selection of hearing protectors) | A-weighted equivalent sound level under hearing protectors (calculated) | PN-EN ISO 9612:2011 | PN-EN 458:2016-06 | PN-EN ISO 4869-2:2018-2 | ||
| 49 | General environment − noise from installations, or equipment and industrial plants | A-weighted equivalent sound pressure level Range (25 - 130) dB |
Direct measurement method | Załącznik nr 7 do rozporządzenia Ministra Klimatu i Środowiska z dnia 07.09.2021 r. (t. j. Dz.U. 2023 poz. 1706) - z wyłączeniem punktu F | |
| 50 | General environment − noise from installations, or equipment and industrial plants | A-weighted equivalent sound pressure level for the reference time T expressed by the indicators LAeqD and LAeqN (calculated) | Załącznik nr 7 do rozporządzenia Ministra Klimatu i Środowiska z dnia 07.09.2021 r. (t. j. Dz.U. 2023 poz. 1706) - z wyłączeniem punktu F | ||
| 51 | Waste gases | Gas volume flow rate for dynamic pressures > 5 Pa Velocity Range (1,0 - 6,0) m/s |
Stagnation pressure method; Anemometric method | PN-Z-04030-7:1994 | |
| 52 | Waste gases | Sampling for determination of dust concentration | PN-Z-04030-7:1994 | ||
| 53 | Waste gases | Dust concentration Range (0,0005 - 9,5) g/m3 |
Gravimetric method | PN-Z-04030-7:1994 | |
| 54 | Waste gases | Dust emission (calculated) | PN-Z-04030-7:1994 | ||
| 55 | Waste gases | Sampling for determination of dust concentration | PN-EN 13284-1:2018-02 | ||
| 56 | Waste gases | Dust concentration Range (0,0002 - 0,1) g/m3 |
Gravimetric method | PN-EN 13284-1:2018-02 | |
| 57 | Waste gases | Dust emission (calculated) | PN-EN 13284-1:2018-02 | ||
| 58 | Waste gases | Sulphur dioxide concentration Range (3 - 1700) mg/m3 |
Non-dispersive infrared spectrometry NDIR | P N-ISO 10396:2001 | |
| 59 | Waste gases | SO2 emission (calculated) | P N-ISO 10396:2001 | ||
| 60 | Waste gases | Carbon monoxide concentration Range (1 - 5300) mg/m3 |
Non-dispersive infrared spectrometry NDIR | PN-ISO 10396:2001 | PN-EN 15058:2017-4 | |
| 61 | Waste gases | CO emission (calculated) | PN-ISO 10396:2001 | PN-EN 15058:2017-4 | ||
| 62 | Waste gases | Carbon dioxide concentration Range (0,1 - 20,0) % |
Non-dispersive infrared spectrometry NDIR | PN-ISO 10396:2001 | |
| 63 | Waste gases | CO2 emission (calculated) | PN-ISO 10396:2001 | ||
| 64 | Waste gases | Nitrogen oxide concentration Range (1 - 600) mg/m3 |
Chemiluminescence method | PN-ISO 10396:2001 | PN-EN 14792:2017-4 | |
| 65 | Waste gases | Nitrogen oxides concentration Range (2 - 900) mg/m3 |
Chemiluminescence method | PN-ISO 10396:2001 | PN-EN 14792:2017-4 | |
| 66 | Waste gases | Emission of NO and NOx (NO and NO2 calculated as NO2) (calculated) | PN-ISO 10396:2001 | PN-EN 14792:2017-4 | ||
| 67 | Waste gases | Oxygen concentration Range (1,0 - 21,0) % |
Paramagnetic method | PN-ISO 10396:2001 | PN-EN 14789:2017-4 | |
| 68 | Waste gases | Oxygen concentration Range (1,0 - 21,0) % |
Electrochemical method | PN-ISO 10396:2001 | |
| 69 | Waste gases | Sampling for determination of hydrogen chloride concentration | PN-EN 1911:2011 | ||
| 70 | Waste gases | Hydrogen chloride concentration/content Range (1 - 5000) mg/m3 Range (0,14 - 10) mg w próbce |
Spectrophotometric method | PN-EN 1911:2011 | |
| 71 | Waste gases | Hydrogen chloride emission (calculated) | PN-EN 1911:2011 | ||
| 72 | Waste gases | Sampling for determination of hydrogen fluoride concentration | ISO 15713:2006 | ||
| 73 | Waste gases | Hydrogen fluoride concentration Range (0,1 - 190) mg/m3 |
Potentiometric method | ISO 15713:2006 | |
| 74 | Waste gases | Hydrogen fluoride emission (calculated) | ISO 15713:2006 | ||
| 75 | Waste gases | Sampling for determination of the concentration of individual gaseous organic compounds. | Aspiration method using absorption tubes | PN-EN 13649:2005 | |
| 76 | Waste gases | Emission of individual gaseous organic compounds (calculated) | PN-EN 13649:2005 | ||
| 77 | Waste gases | Sampling for determination of the concentrations of organic compounds. | Aspiration method using activated carbon/ silica gel/ absorbing solutions | PN-Z-04008-4:1999 | |
| 78 | Waste gases | Emission of organic compounds (calculated) | PN-Z-04008-4:1999 | ||
| 79 | Waste gases | Concentration of organic substances in the form of gases and vapours expressed as total gaseous organic carbon Range (1,0 - 1000) mg/m3 |
Continuous flame ionization detection method (FID) | PN-EN 12619:2013 | |
| 80 | Waste gases | Emission of organic substances in gaseous and vapour form expressed as total gaseous organic carbon (calculated) | PN-EN 12619:2013 | ||
| 81 | Waste gases | Sampling for determination of sulfur dioxide concentration SO2 | PN-EN 14791:2017-04 | ||
| 82 | Waste gases | Concentration/content of sulphur dioxide SO2 Range (1,0 - 5000) mg/m3 Range (0,72 - 10) mg w próbce |
Thoron method | PN-EN 14791:2017-04 | |
| 83 | Waste gases | Emission of sulphur dioxide SO2 (calculated) | PN-EN 14791:2017-04 | ||
| 84 | Waste gases | Water vapour concentration (H2O) Range (23 - 250 g/m3 Range (3,0 - 40,0) % Range (3,0 - 57,0) % |
Condensation-adsorption method; Temperature method | PN-EN 14790:2017-04 | |
| 85 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Sampling for determination of metal concentrations: Cd, Cr, Co, Cu, Mn, Ni, | PN-EN 14385:2005 | ||
| 86 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Pb | PN-EN 14385:2005 | ||
| 87 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Concentration/content of manganese Range (0,0003 - 48,0) mg/m3 Range (0,001 - 24,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-EN 14385:2005 | |
| 88 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Concentration/content of nickel Range (0,002 - 20,0) mg/m3 Range (0,004 - 10,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-EN 14385:2005 | |
| 89 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Concentration/content of copper Range (0,0001 - 6,0) mg/m3 Range (0,0002 - 3,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-EN 14385:2005 | |
| 90 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Concentration/content of lead Range (0,0004 - 4,0) mg/m3 Range (0,001 - 2,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-EN 14385:2005 | |
| 91 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Concentration/content of cobalt Range (0,0004 - 5,0) mg/m3 Range (0,002 - 2,5) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-EN 14385:2005 | |
| 92 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Concentration/content of cadmium Range (0,0001 - 0,7) mg/m3 Range (0,0002 - 2,5) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-EN 14385:2005 | |
| 93 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Concentration/content of chromium Range (0,0005 - 18,4) mg/m3 Range (0,001 - 9,2) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-EN 14385:2005 | |
| 94 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Emission of metals: | PN-EN 14385:2005 | ||
| 95 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Cd, Cr, Co, Cu, Mn, Ni, Pb (calculated) | PN-EN 14385:2005 | ||
| 96 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Sampling for determination of total mercury concentration | PN-EN 13211:2006 | ||
| 97 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Total mercury concentration Range (0,0033 - 770,0) μg/m3 Range (0,007 - 87,5) μg w próbce |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211:2006 | |
| 98 | Waste gases - waste gas samples collected on a filter and into absorbing solution | Total mercury concentration (calculated) | PN-EN 13211:2006 | ||
| 99 | Waste gases | Sampling of PM10; PM2,5 dust for testing | PN-EN ISO 23210:2010 | ||
| 100 | Waste gases | PM10; PM2,5 dust concentration Range (0,0005 ÷ 0,04) g/m3 |
Gravimetric method | PN-EN ISO 23210:2010 | |
| 101 | Waste gases | Emission of dust PM10/PM2,5 (calculated) | PN-EN ISO 23210:2010 | ||
| 102 | Waste gases | Waste gas sampling for determination of formaldehyde, ammonia, MDI, TDI, ozone, sulfuric acid, chlorine | PB-47 wydanie 3 z dnia 01.09.2020 r. | ||
| 103 | Waste gases | Formaldehyde concentration/content Range (0,16 - 100) mg/m3 Range (0,001 - 0,8) mg w próbce |
Spectrophotometric method | PB-24 wydanie 2 z dnia 03.01.2011 r. | |
| 104 | Waste gases | Sulfuric(VI) acid concentration/content Range (0,1 - 200) mg/m3 Range (0,12 - 20,0) mg w próbce |
Turbidimetric method | PB-26 wydanie 2 z dnia 03.01.2011 r. | |
| 105 | Waste gases | Ammonia concentration/content Range (0,23 - 230) mg/m3 Range (0,003 - 6,0) mg w próbce |
Spectrophotometric method | PB-10 wydanie 3 z dnia 03.01.2011 r. | |
| 106 | Waste gases | Ozone concentration Range (0,025 - 0,25) mg/ m3 |
Spectrophotometric method | PB-34 wydanie 1 z dnia 10.05.2010 r. | |
| 107 | Waste gases | Concentration/content of methylenebis(phenyl isocyanate) Range (0,014 - 3,33) mg/m3 Range (0,001 - 0,5) mg w próbce |
Spectrophotometric method | PB- 08 wydanie 3 z dnia 03.01.2011 r. | |
| 108 | Waste gases | Emission of formaldehyde, ammonia, MDI, TDI, ozone, sulphuric acid. (calculated) | PB-47 wydanie 3 z dnia 01.09.2020 r. | ||
| 109 | Waste gases | Sampling for determination of metals in dust | PN-Z-04030-7:1994 | PN-EN 13284-1:2018-02 | ||
| 110 | Waste gases | Emission of metals in dust (calculated) | PN-Z-04030-7:1994 | PN-EN 13284-1:2018-02 | ||
| 111 | Waste gases | Sampling for determination of metals As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl, V in dust | PN-EN 14385:2005 | ||
| 112 | Waste gases | Emission of metals As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl, V in dust (calculated) | PN-EN 14385:2005 | ||
| 113 | Waste gases | Sampling for determination of metals in PM10; PM2,5 dust | PN-EN ISO 23210:2010 | ||
| 114 | Waste gases | Emission of metals in dust PM10; PM2,5 (calculated) | PN-EN ISO 23210:2010 | ||
| 115 | Waste gases | Sampling for determination of metals Zn, Al, Sn, Ca, Na, K, Fe in dust | PN-Z 04030-7:1994 | PB-39 wydanie 3 z dnia 09.01.2012 r. | ||
| 116 | Waste gases | Emission of metals Zn, Al, Sn, Ca, Na, K, Fe in dust (calculated) | PN-Z 04030-7:1994 | PB-39 wydanie 3 z dnia 09.01.2012 r. | ||
| 117 | Waste gases | Concentration/content of iron oxides Range (0,0007 - 80,0) mg/m3 Range (0,002 - 40,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 118 | Waste gases | Concentration/content of manganese Range (0,0003 - 48,0) mg/m3 Range (0,001 - 24,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 119 | Waste gases | Concentration/content of nickel Range (0,002 - 20,0) mg/m3 Range (0,004 - 10,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 120 | Waste gases | Concentration/content of chromium Range (0,0005 - 18,4) mg/m3 Range (0,001 - 9,2) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 121 | Waste gases | Concentration/content of copper Range (0,0001 - 6,0) mg/m3 Range (0,0002 - 3,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 122 | Waste gases | Concentration/content of zinc Range (0,0005 - 16,0) mg/m3 Range (0,002 - 8,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 123 | Waste gases | Concentration/content of lead Range (0,0004 - 4,0) mg/m3 Range (0,001 - 2,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 124 | Waste gases | Aluminium concentration/content Range (0,006 - 32,0) mg/m3 Range (0,02 - 16,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 125 | Waste gases | Concentration/content of tin Range (0,01 - 60,0) mg/m3 Range (0,03 - 30,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 126 | Waste gases | Concentration/content of cobalt Range (0,0004 - 5,0) mg/m3 Range (0,002 - 2,5) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 127 | Waste gases | Concentration/content of cadmium Range (0,0001 - 0,7) mg/m3 Range (0,0002 - 2,5) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 128 | Waste gases | Calcium oxide concentration/content Range (0,0002 - 9,98) mg/m3 Range (0,006 - 13,0) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-39 wydanie 3 z dnia 09.01.2012 r. | |
| 129 | Waste gases | Sodium hydroxide concentration/content Range (0,001 - 14,0) mg/m3 Range (0,005 - 0,42) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-40 wydanie 3 z dnia 09.01.2012 r. | |
| 130 | Waste gases | Potassium hydroxide concentration/content Range (0,0002 - 30,6) mg/m3 Range (0,001 - 0,92) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PB-40 wydanie 3 z dnia 09.01.2012 r. | |
| 131 | Waste gases | Gas volume flow rate for dynamic pressures > 5 Pa | Differential pressure measurement method | PN-EN ISO 16911-1:2013 | |
| 132 | Waste gases | Velocity Range (1,0 - 6,0) m/s |
Anemometric method | PN-EN ISO 16911-1:2013 | |
| 133 | Waste gases | Chlorine concentration Cl Range (0,03 - 5,0) mg/m3 |
Spectrophotometric method | PB-04 wydanie 1 z dnia 01.09. 2020 r. | |
| 134 | Waste gases | Emission of chlorine Cl (calculated) | PB-04 wydanie 1 z dnia 01.09. 2020 r. | ||
| 135 | Waste gases | Sampling for determination of ammonia concentration NH3 | PN-EN ISO 21877:2020-03 | ||
| 136 | Waste gases | Ammonia NH3 concentration Range (0,08 - 32,0) mg/m3 |
Spectrophotometric method | PN-EN ISO 21877:2020-03 | |
| 137 | Waste gases | Ammonia NH3 emission (calculated) | PN-EN ISO 21877:2020-03 | ||
| 138 | Waste gases | Sampling for the determination of PCDD/PCDF mass concentration | PN-EN 1948-1:2006 | ||
| 139 | Waste gases | PCDD/PCDF emission (calculated) | PN-EN 1948-1:2006 | ||
| 140 | Water, wastewater | pH Range 4,0 - 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 141 | Water, wastewater | Biochemical oxygen demand - BOD5 Range (3 - 6000) mg/l O2 |
Electrochemical method | PN-EN ISO 5815-1:2019-12 | |
| 142 | Water, wastewater | Chemical oxygen demand - COD Range (30 - 7000) mg/l O2 |
Titrimetric method | PN-ISO 6060:2006 | |
| 143 | Water, wastewater | Chemical oxygen demand - COD Range (10 - 1500) mg/l O2 |
Spectrophotometric method | PB-45 wydanie 1 z dnia 15.12.2016r. na podstawie testu kuwetowego Merck 1.14540 | |
| 144 | Water, wastewater | Dry residue Range (5 - 3000) mg/l Dissolved solids Range (5 - 3000) mg/l |
Gravimetric method | PN-C-04541:1978 | |
| 145 | Water, wastewater | Total suspended solids (TSS) Range (2,0 - 1000) mg/l |
Gravimetric method | PN-EN 872:2007 + Ap1:2007 | |
| 146 | Water, wastewater | Silica concentration Range (0,005 - 4,0) mg/l |
Spectrophotometric method | PB-11 wydanie 2 z dnia 09.01.2009 r. | na podstawie testu Nanocolor 1-48 | |
| 147 | Water, wastewater | Electrical conductivity Range (10 - 1999) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 148 | Water, wastewater | Total nitrogen concentration Range (0,5 - 150) mg/l |
Spectrophotometric method | PB-27 wydanie 1 z dnia 07.01.2010 r. | na podstawie testu Merck 1.14537 i 1.14763 | |
| 149 | Water, wastewater | Iron concentration Range (0,01 - 50,0) mg/l |
Flame atomic absorption spectrometry (FAAS) | PB-41 wydanie 3 z dnia 09.01.2012 r. | |
| 150 | Water, wastewater | Manganese concentration Range (0,006 - 30,0) mg/l |
Flame atomic absorption spectrometry (FAAS) | PB-41 wydanie 3 z dnia 09.01.2012 r. | |
| 151 | Water, wastewater | Lead concentration Range (0,04 - 50) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002; Metoda A | |
| 152 | Water, wastewater | Nickel concentration Range (0,01 - 50) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002; Metoda A | |
| 153 | Water, wastewater | Cobalt concentration Range (0,03 - 50) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002; Metoda A | |
| 154 | Water, wastewater | Zinc concentration Range (0,05 - 10) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002; Metoda A | |
| 155 | Water, wastewater | Copper concentration Range (0,005 - 30) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002; Metoda A | |
| 156 | Water, wastewater | Cadmium concentration Range (0,004 - 50) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002; Metoda A | |
| 157 | Water, wastewater | Chromium concentration Range (0,01 - 60) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN 1233:2000 | |
| 158 | Water, wastewater | Dissolved oxygen concentration Range (0,5 - 15,0) mg/l O2 |
Electrochemical method | PB-07 wydanie 2 z dnia 09.01.2009 r. | |
| 159 | Wastewater | Sampling for physical and chemical testing Temperature of wastewater and of the collected wastewater sample Range (0,0 - 50,0) oC |
Manual and automatic method | PN-ISO 5667-10:2021-11 | PN-C-04584:1977 | |
| 160 | Wastewater | Phenol concentration Range (0,1 - 2,5) mg/l |
Spectrophotometric method | PB-28 wydanie 1 z dnia 07.01.2010 r. | na podstawie testu Merck 1.14551 | |
| 161 | Surface waters | Sampling for physical and chemical testing Temperature of water and of the collected water sample Range (0,0 - 50,0) oC |
PN-EN ISO 5667-6:2016-12 z wył. pkt. 7.4, 7.5, 7.6 | PN-C-04584:1977 | ||
| 162 | Process waters | Sampling for physical and chemical testing Temperature of water and of the collected water sample Range (0,0 - 50,0) oC |
PB-35 wydanie 1 z dnia 10.05.2010 r. | PN-C-04584:1977 | ||
| 163 | Water intended for consumption | Sampling for physical, chemical testing Temperature of water and of the water sample taken Range (0,0 - 50,0) oC |
PN-ISO 5667-5:2017-10 | PN-C-04584:1977 | ||
| 164 | Water intended for consumption | Sampling for microbiological testing | PN-EN ISO 19458:2007 | ||
| 165 | Workplace environment − air | Concentration of organic compounds Hexane (6,5 - 260) mg/m3 Acetone (20,0 - 2540) mg/m3 Ethyl acetate (10,0 - 1560) mg/m3 n-butyl acetate (10,0 - 1056) mg/m3 Toluene (8,0 - 350) mg/m3 Xylene - mixture of isomers 1,2-; Range 1,3-; 1,4- (8,0 - 340) mg/m3 Ethanol (50,0 - 2520) mg/m3 Butan-2-one (10,0 - 966) mg/m3 4-methylpentan-2-one (8,0 - 320) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-13 wydanie 5 z dnia 22.04.2024 r. | |
| 166 | Workplace environment − air | Concentration of organic compounds Dichloromethane (6,2 - 550) mg/m3 Trichloroethene (6,4 - 290) mg/m3 Tetrachloroethene (6,8 - 320) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-14 wydanie 5 z dnia 22.04.2024 r. | |
| 167 | Workplace environment − air | Concentration of organic compounds Propan-2-ol (50,0 - 1258) mg/m3 Butan-2-ol (10,0 - 648) mg/m3 Propan-1-ol (10,0 - 640) mg/m3 Range 2-Metylopropan-1-ol Range (8,0 - 320) mg/m3 Butan-1-ol (4,0 - 160) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-15 wydanie 5 z dnia 29.08.2023 r. | |
| 168 | Workplace environment − air | Concentration of organic compounds Ethylbenzene (10,0 - 696) mg/m3 Cumene (7,5 - 340) mg/m3 Range 1,3,5- trimetylobenzen Range (8,0 - 340) mg/m3 1,2,4- trimethylbenzene (8,0 - 350) mg/m3 1,2,3- trimethylbenzene (8,0 - 350) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-16 wydanie 5 z dnia 22.04.2024 r. | |
| 169 | Workplace environment − air | Concentration of organic compounds Range 1-metoksypropan-2-ol Range (10,0 - 550) mg/m3 2-Methoxy-1-methylethyl acetate (10,0 - 776) mg/m3 Cyclohexanone (3,0 - 190) mg/m3 2-butoxyethanol (7,7 - 360) mg/m3 2-butoxyethyl acetate (8,2 - 370) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-17 wydanie 5 z dnia 22.04.2024 r. | |
| 170 | Workplace environment − air | Styrene concentration Range (4,0 - 180,0) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04152-02:1986 | PB-19 wydanie 5 z dnia 22.04.2024 r. | |
| 171 | Workplace environment − air | Extraction naphtha concentration Range (20,0 - 1222) mg/m3 Benzene concentration Range (0,16 - 15,0) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04134-02:1981 | PB-18 wydanie 3 z dnia 22.04.2024 r. | |
| 172 | Workplace environment − air | Vinyl acetate concentration Range ( 0,21 - 124,0 ) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04178-02:1987 | |
| 173 | Workplace environment − air | Kerosene concentration Range (0,625 - 400,0 ) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04227-02:1992 | |
| 174 | Workplace environment − air | Phenol concentration Range (0,625 - 20,0 ) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-29 wydanie 2 z dnia 22.04.2024 r. | |
| 175 | Workplace environment − air | Pentane concentration Range (0,21 - 3060 ) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04318:2005 | |
| 176 | Workplace environment − air | Acrylaldehyde concentration Range (0,006 - 20,0) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04045-06:1982 | |
| 177 | Workplace environment − air | Turpentine concentration Range (11 - 600) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04333:2006 | |
| 178 | Workplace environment − air | Ethylene glycol concentration Range (0,5 - 150) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-43 wydanie 3 z dnia 22.04.2024 r. | |
| 179 | Waste gases | Concentration of organic compounds Hexane (0,067 - 86,67) mg/m3 Acetone (0,067 - 210,00) mg/m3 Ethyl acetate (0,067 - 120,00) mg/m3 n-butyl acetate (0,067 - 116,67) mg/m3 Toluene (0,067 - 113,33) mg/m3 Xylene - mixture of isomers 1,2-; 1,3-; Range 1,4- Range (0,067 - 113,33) mg/m3 Ethanol (0,100 - 210,00) mg/m3 Butan-2-one (0,067 - 106,67) mg/m3 4-methylpentan-2-one (0,067 - 106,67) mg/m3 Dichloromethane (0,067 - 86,67) mg/m3 Trichloroethene (0,067 - 96,67) mg/m3 Tetrachloroethene (0,067 - 106,67) mg/m3 Propan-2-ol (0,067 - 200,00) mg/m3 Butan-2-ol (0,067 - 106,67) mg/m3 Propan-1-ol (0,067 - 106,67) mg/m3 2-Methylpropan-1-ol (0,067 - 106,67) mg/m3 Butan-1-ol (0,067 - 67,00) mg/m3 Ethylbenzene (0,067 - 113,33) mg/m3 Cumene (0,067 - 113,33) mg/m3 1,3,5- trimethylbenzene (0,067 - 113,33) mg/m3 1,2,4- trimethylbenzene (0,067 - 113,33) mg/m3 1,2,3- trimethylbenzene (0,067 - 113,33) mg/m3 1-Methoxypropan-2-ol (0,133 - 120,00) mg/m3 2-Methoxy-1-methylethyl acetate (0,100 - 126,67) mg/m3 Cyclohexanone (0,100 - 60,00) mg/m3 2-butoxyethanol (0,100 - 120,00) mg/m3 2-butoxyethyl acetate (0,100 - 120,00) mg/m3 Styrene (0,033 - 60,00) mg/m3 Extraction naphtha (0,067 - 180,00) mg/m3 Benzene (0,033 - 5,67) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 * | PB-23 wydanie 3 z dnia 22.04.2024 r. | |
| 180 | Waste gases | Phenol concentration Range (0,5 - 105) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04008-4:1999 * | PB-29 wydanie 2 z dnia 22.04.2024 r. | |
| 181 | Waste gases | Concentration of aliphatic hydrocarbons (C4 – C10) in air Range (0,66 - 233,0) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 * | PB-36 wydanie 2 z dnia 22.04.2024 r. | |
| 182 | Waste gases | Kerosene concentration Range (0,83 - 200,0) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 * | PB-32 wydanie 2 z dnia 22.04.2024 r. | |
| 183 | Waste gases | Vinyl acetate concentration Range (0,40 - 310) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 * | PB-31 wydanie 2 z dnia 22.04.2024 r. | |
| 184 | Waste gases | Pentane concentration Range (0,90 - 340) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 * | PB-33 wydanie 2 z dnia 22.04.2024 r. | |
| 185 | Waste gases | Turpentine concentration Range (2,72 - 600) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 * | PB-42 wydanie 2 z dnia 22.04.2024 r. | |
| 186 | Waste gases | Ethylene glycol concentration Range (0,5 - 50) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 * | PB-43 wydanie 3 z dnia 22.04.2024 r. | |
| 187 | Workplace environment − air samples collected on sorbent tubes, General environment - waste gas samples collected on sorbent tubes | Phenol content Range (0,015 - 0,50) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PB-29 wydanie 2 z dnia 22.04.2024 r. | |
| 188 | Workplace environment − air samples collected on sorbent tubes, General environment - waste gas samples collected on sorbent tubes | Content of aliphatic hydrocarbons (C4 – C10) in air Range (0,020 - 0,7) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04017-03:1990 z wył. pkt.8 | |
| 189 | Workplace environment − air samples collected on sorbent tubes, General environment - waste gas samples collected on sorbent tubes | Kerosene content Range (0,015 - 1,0) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04227-02:1992 z wył. pkt.8 | |
| 190 | Workplace environment − air samples collected on sorbent tubes, General environment - waste gas samples collected on sorbent tubes | Vinyl acetate content Range (0,005 - 0,93) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID | PN-Z-04178-02:1987 z wył. pkt.8 | |
| 191 | Workplace environment − air samples collected on sorbent tubes, General environment - waste gas samples collected on sorbent tubes | Pentane content Range (0,005 - 1,02 ) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04318:2005 z wył. pkt.8 | |
| 192 | Workplace environment − air samples collected on sorbent tubes, General environment - waste gas samples collected on sorbent tubes | Turpentine content Range (0,082 - 3,0) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PB-42 wydanie 2 z dnia 22.04.2024 r. | |
| 193 | Workplace environment − air samples collected on sorbent tubes, General environment - waste gas samples collected on sorbent tubes | Ethylene glycol content Range (0,02 - 2,0) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PB-43 wydanie 3 z dnia 22.04.2024 r. | |
| 194 | Workplace environment − air samples collected on sorbent tubes, General environment - waste gas samples collected on sorbent tubes | Content of organic compounds Hexane (0,002 - 0,31) mg in sample Acetone (0,002 - 0,77) mg in sample Ethyl acetate (0,002 - 0,39) mg in sample n-Butyl acetate (0,002 - 0,36) mg in sample Toluene (0,002 - 0,36) mg in sample Xylene - mixture of isomers 1,2-; 1,3-; Range 1,4- Range (0,002 - 0,36) mg w próbce Ethanol (0,003 - 0,64) mg in sample Butan-2-one (0,002 - 0,39) mg in sample 4-methylpentan-2-one (0,002 - 0,39) mg in sample Dichloromethane (0,002 - 0,30) mg in sample Trichloroethene (0,002 - 0,31) mg in sample Tetrachloroethene (0,002 - 0,32) mg in sample Propan-2-ol (0,002 - 0,63) mg in sample Butan-2-ol (0,002 - 0,36) mg in sample Propan-1-ol (0,002 - 0,39) mg in sample 2-Methylpropan-1-ol (0,002 - 0,39) mg in sample Butan-1-ol (0,002 - 0,20) mg in sample Ethylbenzene (0,002 - 0,37) mg in sample Cumene (0,002 - 0,36) mg in sample 1,3,5- trimethylbenzene (0,002 - 0,38) mg in sample 1,2,4- trimethylbenzene (0,002 - 0,36) mg in sample 1,2,3- trimethylbenzene (0,002 - 0,38) mg in sample 1-Methoxypropan-2-ol (0,004 - 0,39) mg in sample 2-Methoxy-1-methylethyl acetate (0,003 - 0,40) mg in sample Cyclohexanone (0,003 - 0,23) mg in sample 2-butoxyethanol (0,003 - 0,38) mg in sample 2-Butoxyethyl acetate (0,003 - 0,40) mg in sample Styrene (0,001 - 0,19) mg in sample Extraction naphtha (0,002 - 0,57) mg in sample Benzene (0,001 - 0,02) mg in sample |
Gas chromatography with flame ionization detection (GC-FID) | PB-23 wydanie 3 z dnia 22.04.2024 r. | |
Reference standards (118)
ISO 15713:2006
P B-01 wydanie 4 z dnia 15.01.2014 r.
P N - Z - 0 4 0 0 9 - 1 1 :2008
P N-ISO 10396:2001
PB- 08 wydanie 3 z dnia 03.01.2011 r.
PB-04 wydanie 1 z dnia 01.09. 2020 r.
PB-07 wydanie 2 z dnia 09.01.2009 r.
PB-10 wydanie 3 z dnia 03.01.2011 r.
PB-11 wydanie 2 z dnia 09.01.2009 r.
PB-13 wydanie 5 z dnia 22.04.2024 r.
PB-14 wydanie 5 z dnia 22.04.2024 r.
PB-15 wydanie 5 z dnia 29.08.2023 r.
PB-16 wydanie 5 z dnia 22.04.2024 r.
PB-17 wydanie 5 z dnia 22.04.2024 r.
PB-18 wydanie 3 z dnia 22.04.2024 r.
PB-19 wydanie 5 z dnia 22.04.2024 r.
PB-22 wydanie 4 z dnia 04.02.2020 r.
PB-23 wydanie 3 z dnia 22.04.2024 r.
PB-24 wydanie 2 z dnia 03.01.2011 r.
PB-26 wydanie 2 z dnia 03.01.2011 r.
PB-27 wydanie 1 z dnia 07.01.2010 r.
PB-28 wydanie 1 z dnia 07.01.2010 r.
PB-29 wydanie 2 z dnia 22.04.2024 r.
PB-31 wydanie 2 z dnia 22.04.2024 r.
PB-32 wydanie 2 z dnia 22.04.2024 r.
PB-33 wydanie 2 z dnia 22.04.2024 r.
PB-34 wydanie 1 z dnia 10.05.2010 r.
PB-35 wydanie 1 z dnia 10.05.2010 r.
PB-36 wydanie 2 z dnia 22.04.2024 r.
PB-39 wydanie 3 z dnia 09.01.2012 r.
PB-40 wydanie 3 z dnia 09.01.2012 r.
PB-41 wydanie 3 z dnia 09.01.2012 r.
PB-42 wydanie 2 z dnia 22.04.2024 r.
PB-43 wydanie 3 z dnia 22.04.2024 r.
PB-45 wydanie 1 z dnia 15.12.2016r. na podstawie testu kuwetowego Merck 1.14540
PB-47 wydanie 3 z dnia 01.09.2020 r.
PN-C-04541:1978
PN-C-04584:1977
PN-EN 1233:2000
PN-EN 12619:2013
PN-EN 13211:2006
PN-EN 13284-1:2018-02
PN-EN 13649:2005
PN-EN 13649:2005 *
PN-EN 14253+A1:2011
PN-EN 14385:2005
PN-EN 14789:2017-4
PN-EN 14790:2017-04
PN-EN 14791:2017-04
PN-EN 14792:2017-4
PN-EN 15058:2017-4
PN-EN 1911:2011
PN-EN 1948-1:2006
PN-EN 27888:1999
PN-EN 458:2016-06
PN-EN 872:2007 + Ap1:2007
PN-EN ISO 10523:2012
PN-EN ISO 11079:2008
PN-EN ISO 16911-1:2013
PN-EN ISO 19458:2007
PN-EN ISO 21877:2020-03
PN-EN ISO 23210:2010
PN-EN ISO 4869-2:2018-2
PN-EN ISO 5349-1:2004
PN-EN ISO 5349-2:2004
PN-EN ISO 5349-2:2004/A1:2015-11
PN-EN ISO 5667-6:2016-12 z wył. pkt. 7.4, 7.5, 7.6
PN-EN ISO 5815-1:2019-12
PN-EN ISO 7243:2018-01 +Ap2:2020-04P
PN-EN ISO 7730:2006+Ap2:2016-04
PN-EN ISO 9612:2011
PN-EN ISO 9612:2011 z wyłączeniem metody obejmującej strategię 2 - p. 10 i strategię 3 - p. 11
PN-ISO 10396:2001
PN-ISO 5667-10:2021-11
PN-ISO 5667-5:2017-10
PN-ISO 6060:2006
PN-ISO 8288:2002; Metoda A
PN-ISO 8518:1994
PN-N-01307:1994
PN-Z 04030-7:1994
PN-Z 04502:2019-10
PN-Z-04007-2:1994
PN-Z-04008-4:1999
PN-Z-04008-4:1999 *
PN-Z-04008-7:2002+Az1:2004
PN-Z-04017-03:1990 z wył. pkt.8
PN-Z-04030-7:1994
PN-Z-04037-03:1975
PN-Z-04041:1971
PN-Z-04045-02:1976
PN-Z-04045-06:1982
PN-Z-04100-03:1987
PN-Z-04102-3:2013
PN-Z-04106-3:2002
PN-Z-04134-02:1981
PN-Z-04152-02:1986
PN-Z-04178-02:1987
PN-Z-04178-02:1987 z wył. pkt.8
PN-Z-04227-02:1992
PN-Z-04227-02:1992 z wył. pkt.8
PN-Z-04263-1:2012
PN-Z-04318:2005
PN-Z-04318:2005 z wył. pkt.8
PN-Z-04333:2006
PN-Z-04434:2011
PN-Z-04442-10:2023-05
PN-Z-04469:2025-02
PN-Z-04472:2015-10
PN-Z-04488:2017-10
PN-Z-04507:2022-05
PN-Z-04507:2022-05/Ap1:2022-08
PN-Z-04508:2022-05
PN-Z-04508:2022-05/Ap1:2022-08
PiMOŚP 2012 nr 4 (74) s.117-130
Załącznik nr 7 do rozporządzenia Ministra Klimatu i Środowiska z dnia 07.09.2021 r. (t. j. Dz.U. 2023 poz. 1706) - z wyłączeniem punktu F
na podstawie testu Merck 1.14537 i 1.14763
na podstawie testu Merck 1.14551
na podstawie testu Nanocolor 1-48