🇵🇱 LABORATORIUM BADAŃ I POMIARÓW ŚRODOWISKA PL
Environment
LABORATORIUM BADAŃ I POMIARÓW ŚRODOWISKA is a laboratory accredited by PCA under number AB 875 (Łódź, Poland). Its accreditation scope covers 215 test methods in the following areas: Environment. Test objects include: Waste gases, Workplace environment - air - air samples collected on sorbent tubes, Workplace environment - air - air samples collected on a filter, Workplace environment - air - air samples collected into absorbing…. Most frequently used techniques: Gas chromatography with flame ionization detection (GC-FID), Spectrophotometric method, Flame atomic absorption spectrometry (FAAS).
At a glance
- Accreditation number: PCA AB 875
- Methods in scope: 215
- Types of test objects: 20
- Techniques used: 22
- City: Łódź, Poland
- Accreditation number
- AB 875
- Accreditation body
- PCA
- Address
- EKOLAB Spółka Cywilna, Janusz Michalak, Grażyna Felisiak, Anna Wysocka, ul. Dzika 27A, 91-459 Łódź
- City
- Łódź, Poland
What this laboratory tests (20)
- Waste gases — 81 methods
- Workplace environment - air - air samples collected on sorbent tubes — 29 methods
- Workplace environment - air - air samples collected on a filter — 23 methods
- Workplace environment - air - air samples collected into absorbing solution — 21 methods
- General environment - waste gas samples collected into absorbing solution — 12 methods
- General environment - waste gas samples collected on sorbent tubes — 9 methods
- General environment - waste gas samples collected on a filter — 7 methods
- Workplace environment - air — 7 methods
- Waste gases, General environment - waste gas samples collected on sorbent tubes — 6 methods
- Workplace environment - emergency lighting — 3 methods
- Workplace environment - cold microclimate — 2 methods
- Workplace environment - hand-arm vibration — 2 methods
- Workplace environment - hot microclimate — 2 methods
- Workplace environment - indoor electric lighting — 2 methods
- Workplace environment - moderate microclimate — 2 methods
- and 5 more
Analytical techniques used (22)
- Gas chromatography with flame ionization detection (GC-FID) — 50 methods
- Spectrophotometric method — 33 methods
- Flame atomic absorption spectrometry (FAAS) — 23 methods
- Aspiration method — 19 methods
- Direct measurement method — 8 methods
- Potentiometric method — 6 methods
- High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) — 5 methods
- High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) — 5 methods
- Cold vapour atomic absorption spectrometry (CVAAS) — 4 methods
- High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) — 4 methods
- Gas chromatography with mass spectrometry detection (GC-MS) — 3 methods
- Gravimetric method — 3 methods
- Adsorption method — 1 method
- Aspiration method using activated carbon — 1 method
- Calculation method — 1 method
- and 7 more
Accreditation scope — test methods (215)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Workplace environment - air | Sampling for the assessment of occupational exposure to dust agents – inhalable fraction – respirable fraction organic substances, including – inhalable fraction inorganic substances, including – inhalable fraction – respirable fraction metals and their compounds, including – inhalable fraction – respirable fraction |
Stationary method; Personal dosimetry method | PN-Z-04008-7:2002+Az1:2004 | |
| 2 | Workplace environment - air | Exposure index (calculated) | PN-Z-04008-7:2002+Az1:2004 | ||
| 3 | Workplace environment - air | Carbon monoxide concentration Range (2 - 200) mg/m3 Range (2 – 172) ppm |
Electrochemical method | Procedura Badawcza PB 398 wydanie 2 z dnia 02.05.2013 r. | |
| 4 | Workplace environment - air | Exposure indices (calculated) | Procedura Badawcza PB 398 wydanie 2 z dnia 02.05.2013 r. | ||
| 5 | Workplace environment - air | Concentration of harmful dust agents inhalable fraction – petroleum bitumen – apatites and phosphorites – Portland cement – titanium dioxide – natural graphite – synthetic graphite – kaolin – amorphous and synthetic silica – wood dusts – flour dusts – dusts not classified according to toxicity – organic dusts of animal and plant origin excluding wood and flour dusts – calcium sulphate(VI) (gypsum) – carbon black – talc – coal (hard, brown) – calcium magnesium carbonate (dolomite) – silicon carbide, non-fibrous Range (0,17-20,45) mg/m3 |
Gravimetric method | PN-Z-04507:2022-05 | PN-Z-04507:2022-05+Ap1:2022-08 | |
| 6 | Workplace environment - air | Concentration of harmful dust agents respirable fraction – apatites and phosphorites – Portland cement – natural graphite – amorphous and synthetic silica – organic dusts of animal and plant origin excluding wood and flour dusts – talc – coal (hard, brown) Range (0,09-15,43) mg/m3 |
Gravimetric method | PN-Z-04508:2022-05 | PN-Z-04508:2022-05+Ap1:2022-08 | |
| 7 | Workplace environment - air | Concentration/content of crystalline silica (quartz, cristobalite) respirable fraction Range (0,008 – 0,56) mg/m3 Range (0,005 – 0,4) mg w próbce |
Fourier transform infrared spectrometry (FT-IR) | Podstawy i Metody Oceny Środowiska Pracy 2012, nr 4(74) s. 117-130 | |
| 8 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of acrylaldehyde Range (0,013 - 8,0) mg/m3 Range (0.0056 – 3,44) ppm Range (0,0001 - 0,0060) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 006 wydanie 4 z dnia 02.05.2013 r. | |
| 9 | Workplace environment - air - air samples collected into absorbing solution | Ammonia concentration/content Range (1 - 100) mg/m3 Range (0,01 - 0,2) mg w próbce |
Spectrophotometric method | PN-71/Z-04041 | |
| 10 | Workplace environment - air - air samples collected into absorbing solution | Chlorine concentration/content Range (0,055 - 10) mg/m3 Range (0,0004 - 0,05) mg w próbce |
Spectrophotometric method | PN-75/Z-04037.03 | |
| 11 | Workplace environment - air - air samples collected into absorbing solution | Hydrogen chloride concentration/content Range (0,33 - 50) mg/m3 Range (0,005 - 0,2) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 089 wydanie 2 z dnia 02.05.2013 r. | |
| 12 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of tetraphosphorus decaoxide Range (0,067 - 10) mg/m3 Range (0,001 - 0,02) mg w próbce |
Spectrophotometric method | PN-Z-04073-1:2014-08 | |
| 13 | Workplace environment - air - air samples collected into absorbing solution | Nitrogen dioxide concentration/content Range (0,067 - 10,7) mg/m3 Range (0,035 – 5,61) ppm Range (0,00025 - 0,040) mg w próbce |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 14 | Workplace environment - air - air samples collected into absorbing solution | Hydrogen peroxide concentration/content Range (0,025 – 5,0) mg/m3 Range (0,0005 - 0,10) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 299 wydanie 5 z dnia 02.05.2023 r. | |
| 15 | Workplace environment - air - air samples collected into absorbing solution | Sulphur dioxide concentration/content Range (0,07 - 12) mg/m3 Range (0,026 – 4,52) ppm Range (0,001 - 0,02) mg w próbce |
Spectrophotometric method | PN-Z-04015-12:1996 | |
| 16 | Workplace environment - air - air samples collected into absorbing solution | Formaldehyde concentration/content Range (0,013 - 3,2) mg/m3 Range (0,0001 - 0,004) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 196 wydanie 4 z dnia 02.05.2013 r. | |
| 17 | Workplace environment - air - air samples collected into absorbing solution | Phosphoric(V) acid concentration/content Range (0,092 - 15) mg/m3 Range (0,0014 - 0,028) mg w próbce |
Spectrophotometric method | PN-Z-04073-1:2014-08 | |
| 18 | Workplace environment - air - air samples collected into absorbing solution | Formic acid concentration/content Range (0,33 - 40) mg/m3 Range (0,0025 - 0,075) mg w próbce |
Spectrophotometric method | PN-88/Z-04196.02 | |
| 19 | Workplace environment - air - air samples collected into absorbing solution | Ozone concentration/content Range (0,013 – 10) mg/m3 Range (0,0002 – 0,005) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 341 wydanie 5 z dnia 02.05.2013 r. | |
| 20 | Workplace environment - air - air samples collected into absorbing solution | Hydrogen sulphide concentration/content Range (0,67 - 33,3) mg/m3 Range (0,005 - 0,050) mg w próbce |
Spectrophotometric method | PN-Z-04015-13:1996 | |
| 21 | Workplace environment - air - air samples collected into absorbing solution | Nitrogen monoxide concentration/content Range (0,044 - 7,0) mg/m3 Range (0,035 – 5,62) ppm Range (0,00016 - 0,026) mg w próbce |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 22 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of hydrogen cyanide and cyanides – calculated as CN (hydrogen cyanide) Range (0,063 - 12,5) mg/m3 Range (0,056 – 11,16) ppm Range (0,0005 - 0,05) mg w próbce |
Potentiometric method | Procedura Badawcza PB 094A wydanie 3 z dnia 02.05.2013 r. | |
| 23 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content: hydrogen fluoride fluorides expressed as F- Range (0,033 - 13,3) mg/m3 Range (0,001 - 0,1) mg w próbce |
Potentiometric method | Procedura Badawcza PB 192 wydanie 5 z dnia 02.05.2013 r. | |
| 24 | Workplace environment - air - air samples collected into absorbing solution | Potassium hydroxide concentration/content Range (0,05 - 9,5) mg/m3 Range (0,0007 - 0,014) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-87/Z-04005.05 | |
| 25 | Workplace environment - air - air samples collected into absorbing solution | Sodium hydroxide concentration/content Range (0,06 - 11,6) mg/m3 Range (0,0009 - 0,018) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-88/Z-04005.06 | |
| 26 | Workplace environment - air - air samples collected into absorbing solution | Ethanol concentration/content Range (40 - 3200) mg/m3 Range (0,8 - 64) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-85/Z-04140/02 | |
| 27 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of acrylamide Range (0,017 – 3,300) mg/m3 Range (0,0010 - 0,0198) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 007 wydanie 3 z dnia 02.05.2013 r. | |
| 28 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of acrylamide Range (0,0068- 2,7) mg/m3 Range (0,00081- 0,135) mg w próbce |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | PN-Z-04486:2017-10 | |
| 29 | Workplace environment - air - air samples collected into absorbing solution - air samples collected on sorbent tubes | Methanol concentration/content Range (8,0 – 600,0) mg/m3 Range (0,080 – 6,0) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04476:2016-10 | PN-81/Z-04028.01 | |
| 30 | Workplace environment - air - air samples collected on sorbent tubes and on a filter | Concentration/content of mercury, its vapours and inorganic compounds - calculated as Hg Range (0,002 - 1) mg/m3 Range (0,0001– 0,006) mg w próbce |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-Z-04332:2006 Procedura Badawcza PB 366 wydanie 6 z dnia 02.05.2022 r. | |
| 31 | Workplace environment - air - air samples collected on sorbent tubes | Formaldehyde concentration/content Range (0,030- 10,0) mg/m3 Range (0,00030- 0,020) mg w próbce |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Procedura Badawcza PB 006A wydanie 2 z dnia 02.05.2013 r. | |
| 32 | Workplace environment - air - air samples collected on sorbent tubes | N,N-Dimethylformamide concentration/content Range (1,50 – 120,0) mg/m3 Range (0,495 – 39,62) ppm Range (0,0075- 0,30) mg w próbce |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Procedura Badawcza PB 148A wydanie 1 z dnia 02.05.2024 r. | |
| 33 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of ethyl acrylate Range (2,0 - 200) mg/m3 Range (0,04 - 4,5) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-78/Z-04113/02 | |
| 34 | Workplace environment - air - air samples collected on sorbent tubes | Methyl acrylate concentration/content Range (1,0 - 100) mg/m3 Range (0,02 - 2) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04113/05 | |
| 35 | Workplace environment - air - air samples collected on sorbent tubes | White spirit concentration/content Range (30 - 1800) mg/m3 Range (0,6 - 18) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-81/Z-04134.03 | |
| 36 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of chloroethene Range (0,5 - 64) mg/m3 Range (0,01 - 1,3) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-78/Z-04112/01 | |
| 37 | Workplace environment - air - air samples collected on sorbent tubes | Dichloromethane concentration/content Range (2,5 - 200) mg/m3 Range (0,05 - 4) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-77/Z-04110/01 | |
| 38 | Workplace environment - air - air samples collected on sorbent tubes | Ethylene oxide concentration/content Range (0,1 - 10) mg/m3 Range (0,055 – 5,5) ppm Range (0,002 - 0,2) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04300:2002 | |
| 39 | Workplace environment - air - air samples collected on sorbent tubes | Phenol concentration/content Range (0,1 - 16) mg/m3 Range (0,002 - 0,32) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04159/10 | |
| 40 | Workplace environment - air - air samples collected on sorbent tubes | Ethylene glycol concentration/content Range (1,5 - 150) mg/m3 Range (0,03 - 3) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Podstawy i Metody Oceny Środowiska Pracy 1997, nr 17 s. 55 – 59 | |
| 41 | Workplace environment - air - air samples collected on sorbent tubes | Acetic acid concentration/content Range (0,5 - 100) mg/m3 Range (0,20 – 40,17) ppm Range (0,025 - 5) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04323:2004 | |
| 42 | Workplace environment - air - air samples collected on sorbent tubes | Methyl methacrylate concentration/content Range (5 - 560) mg/m3 Range (0,1 - 11) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04113/09 | |
| 43 | Workplace environment - air - air samples collected on sorbent tubes | Kerosene concentration/content Range (10 - 1000) mg/m3 Range (0,2 - 20) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04227.02 | |
| 44 | Workplace environment - air - air samples collected on sorbent tubes | Vinyl acetate concentration/content Range (1 - 80) mg/m3 Range (0,02 - 1,6) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-87/Z-04178/02 | |
| 45 | Workplace environment - air - air samples collected on sorbent tubes | Pentane concentration/content Range (50 - 5000) mg/m3 Range (1 - 10) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04318:2005 | |
| 46 | Workplace environment - air - air samples collected on sorbent tubes | Tetrachloroethene concentration/content Range (5 - 1000) mg/m3 Range (0,73 – 145,2) ppm Range (0,1 - 20) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-83/Z-04118/02 | |
| 47 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of desflurane Range (4,0 – 900,0) mg/m3 Range (0,020 – 9,6) mg w próbce |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-Z-04422:2010 | |
| 48 | Workplace environment - air - air samples collected on sorbent tubes | Isoflurane concentration/content Range (1,0 – 240,0) mg/m3 Range (0,005 – 0,240) mg w próbce |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-Z-04423:2011 | |
| 49 | Workplace environment - air - air samples collected on sorbent tubes | Sevoflurane concentration/content Range (2,0 – 450,0) mg/m3 Range (0,01 – 0,450) mg w próbce |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-Z-04429:2011 | |
| 50 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of butane Range (20,0 – 6000) mg/m3 Range (0,060 – 4,50) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-1:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r. | |
| 51 | Workplace environment - air - air samples collected on sorbent tubes | Propane concentration/content Range (20 – 4000) mg/m3 Range (0,06 – 3,0) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-2:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r. | |
| 52 | Workplace environment - air - air samples collected on sorbent tubes | Benzene concentration/content Range (0,1 - 20) mg/m3 Range (0,031 – 6,18) ppm Range (0,002 - 0,4) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 025 wydanie 3 z dnia 02.05.2013 r. | |
| 53 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: cyclohexanone, styrene Range (2,5 - 500) mg/m3 Range (0,05 - 5) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 025 wydanie 3 z dnia 02.05.2013 r. | |
| 54 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of 2-methylpropan-1-ol (isobutanol) Range (5,0 – 500,0) mg/m3 Range (0,10 – 5,0) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023-02 | NIOSH 1401:1994 | |
| 55 | Workplace environment - air - air samples collected on sorbent tubes | 2-butoxyethanol concentration/content Range (5 - 1000) mg/m3 Range (0,1- 20) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 025 wydanie 3 z dnia 02.05.2013 r. | |
| 56 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: butan-1-ol hexane xylene – mixture of isomers: 1,2-; 1,3-; 1,4-; cumene 4-methylpentan-2-one toluene trimethylbenzene (trimethylbenzene) – mixture of isomers 1,2,3-; 1,2,4- and 1,3,5- Range (5 - 500) mg/m3 Range (0,1 - 5) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 025 wydanie 3 z dnia 02.05.2013 r. | |
| 57 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: butan-2-ol ethylbenzene 1-methoxypropan-2-ol 2-butoxyethyl acetate 2-methoxy-1-methylethyl acetate propyl acetate Range (10 - 1000) mg/m3 Range (0,2 - 10) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 025 wydanie 3 z dnia 02.05.2013 r. | |
| 58 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: butan-2-one n-butyl acetate propan-1-ol propan-2-ol Range (10 - 1500) mg/m3 Range (0,2 - 15) mg w próbce ethyl acetate Range (10 - 1500) mg/m3 Range (2,74 – 410,8) ppm Range (0,2 - 15) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 025 wydanie 3 z dnia 02.05.2013 r. | |
| 59 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: acetone extraction naphtha acyclic isomers of hexane saturated, except hexane 2,2- dimethylbutane, 2,3-dimethylbutane, 3-methylpentane, 2-methylpentane isopropyl acetate Range (10 - 2000) mg/m3 Range (0,2 - 20) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 025 wydanie 3 z dnia 02.05.2013 r. | |
| 60 | Workplace environment - air - air samples collected on a filter | Concentration/content of aluminium trioxide – calculated as Al – inhalable fraction – respirable fraction Range (0,018 – 8,0) mg/m3 Range (0,00025 - 0,010) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 425 wydanie 4 z dnia 02.05.2013 r. | |
| 61 | Workplace environment - air - air samples collected on a filter | Concentration/content of highly refined mineral oils excluding metalworking fluids – inhalable fraction Range (0,28 - 22,4) mg/m3 Range (0,15 - 10,2) mg w próbce |
Spectrophotometric method | PN-Z-04108-6:2006+Az1:2009 | |
| 62 | Workplace environment - air - air samples collected on a filter | Concentration/content of chromium (VI) compounds – calculated as Cr (VI) Range (0,0007 – 0,08) mg/m3 Range (0,0005 - 0,625) mg w próbce |
Spectrophotometric method | NIOSH 7600:2015 | |
| 63 | Workplace environment - air - air samples collected on a filter | Concentration/content of chromium and its compounds (chromium (II), (III), (VI)) – calculated as Cr Range (0,001 – 2,5) mg/m3 Range (0,0005 - 0,625) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | Procedura Badawcza PB 092 wydanie 2 z dnia 02.05.2013 r. | |
| 64 | Workplace environment - air - air samples collected on a filter | Concentration of metallic chromium, chromium compounds: chromium (II) – calculated as Cr (II), chromium (III) – calculated as Cr (III) | Calculation method | Procedura Badawcza PB 90 wydanie 1 z dnia 02.05.2021 r. | |
| 65 | Workplace environment - air - air samples collected on a filter | Concentration/content of tin and its inorganic compounds, except stannane – calculated as Sn – inhalable fraction Range (0,125 – 20) mg/m3 Range (0,05 - 6) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04488:2017-10 | |
| 66 | Workplace environment - air - air samples collected on a filter | Concentration/content of cadmium and its inorganic compounds – calculated as Cd inhalable fraction respirable fraction Range (0,0002 - 0,027) mg/m3 Range (0,0001- 0,2) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04102-3:2013-10 | |
| 67 | Workplace environment - air - air samples collected on a filter | Concentration/content of manganese and its inorganic compounds – expressed as Mn inhalable fraction respirable fraction Range (0,004- 2,5) mg/m3 Range (0,0015 - 0,45) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04472:2015-10+Ap1:2015-12 | |
| 68 | Workplace environment - air - air samples collected on a filter | Concentration/content of copper and its inorganic compounds – calculated as Cu Range (0,0014 - 0,5) mg/m3 Range (0,0005 - 0,1) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04106-3:2002 | |
| 69 | Workplace environment - air - air samples collected on a filter | Concentration/content of nickel and its compounds, except nickel tetracarbonyl – calculated as Ni Range (0,007 - 1,3) mg/m3 Range (0,0025 - 0,4) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04502:2019-10 | |
| 70 | Workplace environment - air - air samples collected on a filter | Concentration/content of lead and its inorganic compounds, excluding lead (II) arsenate (V) and lead (II) chromate (VI) - calculated as Pb inhalable fraction Range (0,004 - 0,3) mg/m3 Range (0,002 - 0,5) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04487:2017-10 | |
| 71 | Workplace environment - air - air samples collected on a filter | Concentration/content of silver - inhalable fraction, insoluble silver compounds – calculated as Ag, soluble silver compounds – calculated as Ag Range (0,001 - 0,3) mg/m3 Range (0,001 - 0,4) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04216-2:2012 Podstawy i Metody Oceny Środowiska Pracy 1998, nr 19 s. 165 – 169 | |
| 72 | Workplace environment - air - air samples collected on a filter | Concentration/content of zinc oxide – calculated as Zn – inhalable fraction Range (0,03 - 20) mg/m3 Range (0,002 - 0,2) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-87/Z-04100/03 | |
| 73 | Workplace environment - air - air samples collected on a filter | Calcium oxide concentration/content inhalable fraction respirable fraction Range (0,04 - 12) mg/m3 Range (0,007 - 1) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04442:2023-05 | |
| 74 | Workplace environment - air - air samples collected on a filter | Concentration/content of iron oxides – calculated as Fe – respirable fraction – inhalable fraction Range (0,25 - 30) mg/m3 Range (0,005 - 1,2) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04469:2015-10 | |
| 75 | Workplace environment - air - air samples collected on a filter | Potassium hydroxide concentration/content Range (0,004 – 4,8) mg/m3 Range (0,0014 – 0,14) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04436:2011 | |
| 76 | Workplace environment - air - air samples collected on a filter | Sodium hydroxide concentration/content Range (0,005 – 5,8) mg/m3 Range (0,0017 – 0,17) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04435:2011 | |
| 77 | Workplace environment - air - air samples collected on a filter | Concentration/content of highly refined mineral oils excluding metalworking fluids – inhalable fraction Range (0,28 – 22,4) mg/m3 Range (0,15 - 10,2) mg w próbce |
Infrared spectrometry (FT-IR) | PN-Z-04108-5:2006 | |
| 78 | Workplace environment - air - air samples collected on a filter | Concentration/content of dibutyl phthalate – inhalable fraction Range (0,5 - 20) mg/m3 Range (0,25 - 10) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04208/04 | |
| 79 | Workplace environment - air - air samples collected on a filter | Bis(2-ethylhexyl) phthalate concentration/content Range (0,1 - 20) mg/m3 Range (0,05 - 10) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04208/05 | |
| 80 | Workplace environment - air - air samples collected on a filter | Concentration/content of toluene-2,4-diyl diisocyanate (2,4-TDI) Range (0,0005 – 1,33) mg/m3 Range (0,0001 – 0,02) mg w próbce |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | PN-Z-04490:2017-10 | |
| 81 | Workplace environment - air - air samples collected on a filter | Concentration/content of toluene-2,6-diyl diisocyanate (2,6-TDI) Range (0,0005 – 1,33) mg/m3 Range (0,0001 – 0,02) mg w próbce |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | PN-Z-04490:2017-10 | |
| 82 | Workplace environment - air - air samples collected on a filter | Concentration/content of methylenebis (phenyl isocyanate) (MDI) Range (0,0005 – 1,33) mg/m3 Range (0,0001 – 0,02) mg w próbce |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r. | |
| 83 | Workplace environment - indoor electric lighting | Illuminance Range (0,5 – 9000) lx |
Direct measurement method | Procedura Badawcza PB 12464 Wydanie 3 z 02.05.2016 r. | |
| 84 | Workplace environment - indoor electric lighting | Illuminance uniformity (calculated) | Procedura Badawcza PB 12464 Wydanie 3 z 02.05.2016 r. | ||
| 85 | Workplace environment - emergency lighting | Illuminance Range (0,5 – 1000) lx |
Direct measurement method | PN-EN 1838:2025-05 Metoda A | |
| 86 | Workplace environment - emergency lighting | Ratio of minimum to maximum illuminance (calculated) | PN-EN 1838:2025-05 Metoda A | ||
| 87 | Workplace environment - emergency lighting | Illuminance uniformity for the high-risk zone (calculated) | PN-EN 1838:2025-05 Metoda A | ||
| 88 | Workplace environment - moderate microclimate | Air temperature: Range (10 – 30) o C Black globe temperature: Range (10 – 40) o C Air humidity: Range (20 – 90) % Air velocity: Range (0,15 – 5) m/s |
Direct measurement method | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | |
| 89 | Workplace environment - moderate microclimate | PMV index, PPD index (calculated) | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | ||
| 90 | Workplace environment - hot microclimate | Air temperature: Range (10 – 60) o C Natural wet bulb temperature: Range (10 – 60) o C Black globe temperature: Range (10 – 60) o C |
Direct measurement method | PN-EN ISO 7243:2018 -01 | |
| 91 | Workplace environment - hot microclimate | WBGT index, WBGTeff index (calculated) | PN-EN ISO 7243:2018 -01 | ||
| 92 | Workplace environment - cold microclimate | Air temperature: Range (- 30 – 10) o C Black globe temperature: Range (- 30 – 15) o C Air humidity: Range (20 – 90) % Air velocity: Range (0,15 – 5) m/s |
Direct measurement method | PN-EN ISO 11079:2008 | |
| 93 | Workplace environment - cold microclimate | tWC index, IREQmin index, IREQneutral index (calculated) | PN-EN ISO 11079:2008 | ||
| 94 | Workplace environment - noise | A-weighted equivalent sound level Maximum A-weighted sound level Range (30 - 135) dB C-weighted peak sound pressure level Range (50 - 140) dB |
Direct measurement method | PN-N-01307:1994 | PN-EN ISO 9612:2011 z wyłączeniem metod obejmujących Strategię 2 - pkt. 10 i Strategię 3 - pkt. 11 | |
| 95 | Workplace environment - noise | Noise exposure level referred to: an 8-hour daily working time the average weekly working time (calculated) |
PN-N-01307:1994 | PN-EN ISO 9612:2011 z wyłączeniem metod obejmujących Strategię 2 - pkt. 10 i Strategię 3 - pkt. 11 | ||
| 96 | Workplace environment - hand-arm vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,32 – 300) m/s2 |
Direct measurement method | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004 / A1:2015 | |
| 97 | Workplace environment - hand-arm vibration | Daily exposure, expressed as the energy-equivalent value for 8 hours of action of the vector sum of the r.m.s. frequency-corrected vibration accelerations determined for three directional components (ahwx, ahwy, ahwz), Exposure lasting 30 minutes or less, expressed as the vector sum of the r.m.s. frequency-weighted vibration accelerations determined for three directional components (ahwx, ahwy, ahwz) (calculated) | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004 / A1:2015 | ||
| 98 | Workplace environment - whole-body vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,04 – 35) m/s2 |
Direct measurement method | PN-EN 14253+A1:2011 | |
| 99 | Workplace environment - whole-body vibration | Daily exposure, expressed as the energy-equivalent value for 8 hours of action of the r.m.s. frequency-corrected vibration acceleration dominant among the vibration accelerations determined for three directional components taking into account the appropriate factors (1,4awx, 1,4awy, awz), Exposure lasting 30 minutes or less, expressed as the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for three directional components taking into account the appropriate factors (1,4awx, 1,4awy, awz) (calculated) | PN-EN 14253+A1:2011 | ||
| 100 | Waste gases | Gas volume flow rate for dynamic pressures > 10 Pa Velocity Range (0,5 – 20,0) m/s |
Stagnation pressure method; Thermoanemometric method | PN-Z-04030-7:1994 | |
| 101 | Waste gases | Sampling for determination of concentrations of organic compounds | Aspiration method using activated carbon | PN-Z-04008-4:1999 | |
| 102 | Waste gases | Concentration of oxygen, carbon monoxide, nitrogen monoxide, nitrogen dioxide, sulphur dioxide SO2, CO2, NO, CO, O2, NO2: SO2 (9 - 1500) mg/m3 C O 2 ( 0 , 1 – 1 4 ) % N O ( 1 3 - 7 0 0 ) m g/m3 NO2 (8 – 40) mg/m3 CO (25 – 1000) mg/m3 O2 Range (3 - 15) % |
Non-dispersive infrared spectrometry (NDIR); Electrochemical method | PN ISO 10396:2001 | |
| 103 | Waste gases | Emission of CO, NO and NO2, NOx (NO and NO2 calculated as NO2 ), SO2, CO2 (calculated) | PN ISO 10396:2001 | ||
| 104 | Waste gases | Total organic carbon concentration (TVOC) Range (0,6 – 1000) mg/m3 |
Continuous flame ionization detection method (FID) | PN-EN 12619:2013-05 | |
| 105 | Waste gases | TVOC emission (calculated) | PN-EN 12619:2013-05 | ||
| 106 | Waste gases | Sampling for determination of dust concentration | PN-EN 13284-1:2018-02 CEN/TR 17078:2017 | ||
| 107 | Waste gases | Dust concentration Range (0,5 - 50) mg/m3 |
Gravimetric method | PN-EN 13284-1:2018-02 CEN/TR 17078:2017 | |
| 108 | Waste gases | Dust emission (calculated) | PN-EN 13284-1:2018-02 CEN/TR 17078:2017 | ||
| 109 | Waste gases | Sampling for determination of the concentration of individual gaseous organic compounds | PN-EN 13649:2005 | ||
| 110 | Waste gases | Benzene concentration Range (0,1 - 20) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 111 | Waste gases | Concentration: cyclohexanone, styrene Range (2,5 - 500) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 112 | Waste gases | Concentration: butan-2-ol ethylbenzene 1-methoxypropan-2-ol 2-butoxyethyl acetate 2-methoxy-1-methylethyl acetate propyl acetate Range (10 - 1000) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 113 | Waste gases | Concentration: butan-1-ol hexane xylene – mixture of isomers: 1,2-; 1,3-; 1,4-; cumene 4-methylpentan-2-one toluene trimethylbenzene (trimethylbenzene) – mixture of isomers 1,2,3-; 1,2,4- and 1,3,5- Range (5 - 500) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 114 | Waste gases | 2-butoxyethanol concentration Range (5 - 1000) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 115 | Waste gases | Concentration: butan-2-one n-butyl acetate ethyl acetate propan-1-ol propan-2-ol Range (10 - 1500) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 116 | Waste gases | Concentration: acetone extraction naphtha acyclic isomers of hexane saturated, except hexane 2,2- dimethylbutane, 2,3-dimethylbutane, 3-methylpentane, 2-methylpentane isopropyl acetate Range (10 - 2000) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 117 | Waste gases | Emission of the above-mentioned organic compounds (calculated) | PN-EN 13649:2005 | ||
| 118 | Waste gases | Sampling for the determination of mercury concentration | PN-EN 13211+AC:2006 | ||
| 119 | Waste gases | Mercury concentration Range (0,00042 – 1,0) mg/m3 Range (0,000025 – 0,06) mg w próbce |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006 | |
| 120 | Waste gases | Mercury emission (calculated) | PN-EN 13211+AC:2006 | ||
| 121 | Waste gases | Sampling for determination of methanol | PN-EN 13649:2005 | ||
| 122 | Waste gases | Methanol concentration Range (8 – 600) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 123 | Waste gases | Methanol emission (calculated) | PN-EN 13649:2005 | ||
| 124 | Waste gases | Sampling for the determination of hydrogen chloride | PN-EN 1911:2011 | ||
| 125 | Waste gases | Hydrogen chloride concentration Range (0,67 - 50) mg/m3 |
Spectrophotometric method | PN-EN 1911:2011 | |
| 126 | Waste gases | Hydrogen chloride emission (calculated) | PN-EN 1911:2011 | ||
| 127 | Waste gases | Water vapour content Range (29 – 250) g/m3 Range (4 – 40) % |
Adsorption method | PN-EN 14790:2017-04 | |
| 128 | Waste gases | Sampling for determination of chromium concentration in dust | Aspiration method | Procedura Badawcza PB 092 wydanie 2 z dnia 02.05.2013 r. | |
| 129 | Waste gases | Chromium concentration in dust Range (0,006 – 2,5) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | Procedura Badawcza PB 092 wydanie 2 z dnia 02.05.2013 r. | |
| 130 | Waste gases | Emission of chromium in dust (calculated) | Procedura Badawcza PB 092 wydanie 2 z dnia 02.05.2013 r. | ||
| 131 | Waste gases | Sampling for determination of tin concentration in dust | Aspiration method | Procedura Badawcza PB 095 wydanie 2 z dnia 02.05.2013 r. | |
| 132 | Waste gases | Tin concentration in dust Range (0,125 – 20) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | Procedura Badawcza PB 095 wydanie 2 z dnia 02.05.2013 r. | |
| 133 | Waste gases | Emission of tin in dust (calculated) | Procedura Badawcza PB 095 wydanie 2 z dnia 02.05.2013 r. | ||
| 134 | Waste gases | Sampling for the determination of hydrogen sulphide | Aspiration method | Procedura Badawcza PB 370 wydanie 5 z dnia 02.05.2013 r. | |
| 135 | Waste gases | Hydrogen sulphide concentration Range (0,67 - 33,3) mg/m3 |
Spectrophotometric method | Procedura Badawcza PB 370 wydanie 5 z dnia 02.05.2013 r. | |
| 136 | Waste gases | Hydrogen sulphide emission (calculated) | Procedura Badawcza PB 370 wydanie 5 z dnia 02.05.2013 r. | ||
| 137 | Waste gases | Sampling for determination of formaldehyde concentration | Aspiration method | CEN/TS 17638:2021 Procedura Badawcza PB 197 wydanie 2 z dnia 21.11.2022 r. | |
| 138 | Waste gases | Formaldehyde concentration Range (0,050 – 10,0) mg/m3 |
Spectrophotometric method | CEN/TS 17638:2021 Procedura Badawcza PB 197 wydanie 2 z dnia 21.11.2022 r. | |
| 139 | Waste gases | Formaldehyde emission (calculated) | CEN/TS 17638:2021 Procedura Badawcza PB 197 wydanie 2 z dnia 21.11.2022 r. | ||
| 140 | Waste gases | Sampling for determination of hydrogen cyanide and cyanides – expressed as CN (hydrogen cyanide, sodium cyanide, potassium cyanide, calcium cyanide) | Aspiration method | Procedura Badawcza PB 094A wydanie 3 z dnia 02.05.2013 r. | |
| 141 | Waste gases | Concentration of hydrogen cyanide and cyanides – calculated as CN (hydrogen cyanide, sodium cyanide, potassium cyanide, calcium cyanide) Range (0,063 - 12,5) mg/m3 |
Potentiometric method | Procedura Badawcza PB 094A wydanie 3 z dnia 02.05.2013 r. | |
| 142 | Waste gases | Emission of hydrogen cyanide and cyanides – calculated as CN (hydrogen cyanide, sodium cyanide, potassium cyanide, calcium cyanide) (calculated) | Procedura Badawcza PB 094A wydanie 3 z dnia 02.05.2013 r. | ||
| 143 | Waste gases | Sampling for determination of the concentration of 4,4’-methylenebis(phenyl isocyanate) (MDI), toluene-2,4-diyl diisocyanate (2,4-TDI), toluene-2,6-diyl diisocyanate (2,6-TDI) | Aspiration method | Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r. | |
| 144 | Waste gases | 4,4’-methylenebis (phenyl isocyanate) (MDI) concentration Range (0,0005 – 1,33) mg/m3 |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r. | |
| 145 | Waste gases | Toluene-2,4-diyl diisocyanate (2,4-TDI) concentration Range (0,0005 – 1,33) mg/m3 |
High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) | Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r. | |
| 146 | Waste gases | Toluene-2,6-diyl diisocyanate (2,6-TDI) concentration Range (0,0005 – 1,33) mg/m3 |
High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) | Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r. | |
| 147 | Waste gases | Emission of 4,4’-methylenebis(phenyl isocyanate) (MDI), toluene-2,4-diyl diisocyanate (2,4-TDI), toluene-2,6-diyl diisocyanate (2,6-TDI) (calculated) | Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r. | ||
| 148 | Waste gases | Sampling for the determination of formaldehyde | Aspiration method | Procedura Badawcza PB 006A wydanie 2 z dnia 02.05.2013 r. | |
| 149 | Waste gases | Formaldehyde concentration Range (0,030 – 10,0) mg/m3 |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Procedura Badawcza PB 006A wydanie 2 z dnia 02.05.2013 r. | |
| 150 | Waste gases | Formaldehyde emission (calculated) | Procedura Badawcza PB 006A wydanie 2 z dnia 02.05.2013 r. | ||
| 151 | Waste gases | Sampling for determination of hydrogen fluoride and fluorides expressed as F- | Aspiration method | Procedura Badawcza PB 192 wydanie 5 z dnia 02.05.2013 r. | |
| 152 | Waste gases | Concentration of hydrogen fluoride and fluorides calculated as F- Range (0,033 - 13,3) mg/m3 |
Potentiometric method | Procedura Badawcza PB 192 wydanie 5 z dnia 02.05.2013 r. | |
| 153 | Waste gases | Emission of hydrogen fluoride and fluorides calculated as F-(calculated) | Procedura Badawcza PB 192 wydanie 5 z dnia 02.05.2013 r. | ||
| 154 | Waste gases | Sampling for determination of methanol | Aspiration method | Procedura Badawcza PB 272 wydanie 2 z dnia 02.05.2013 r. | |
| 155 | Waste gases | Methanol concentration Range (8 – 400) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 272 wydanie 2 z dnia 02.05.2013 r. | |
| 156 | Waste gases | Methanol emission (calculated) | Procedura Badawcza PB 272 wydanie 2 z dnia 02.05.2013 r. | ||
| 157 | Waste gases | Sampling for determination of the concentration of 2-methylpropan-1-ol (isobutanol) | Aspiration method | PN-EN 13649:2005 | NIOSH 1401:1994 | |
| 158 | Waste gases | 2-methylpropan-1-ol (isobutanol) concentration Range (5,0 – 500,0) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | NIOSH 1401:1994 | |
| 159 | Waste gases | Emission of 2-methylpropan-1-ol (isobutanol) (calculated) | PN-EN 13649:2005 | NIOSH 1401:1994 | ||
| 160 | Waste gases | Sampling for determination of ammonia concentration | Aspiration method | Procedura Badawcza PB 019 wydanie 4 z dnia 02.05.2013 r. | PN-EN ISO 21877:2020-03 | |
| 161 | Waste gases | Ammonia concentration Range (0,02 – 80) mg/m3 |
Spectrophotometric method | Procedura Badawcza PB 019 wydanie 4 z dnia 02.05.2013 r. | PN-EN ISO 21877:2020-03 | |
| 162 | Waste gases | Ammonia emission (calculated) | Procedura Badawcza PB 019 wydanie 4 z dnia 02.05.2013 r. | PN-EN ISO 21877:2020-03 | ||
| 163 | Waste gases | Sampling for the determination of chlorine concentration | Aspiration method | Procedura Badawcza PB 062 wydanie 3 z dnia 02.05.2013 r. | |
| 164 | Waste gases | Chlorine concentration Range (0,13 – 10) mg/m3 |
Spectrophotometric method | Procedura Badawcza PB 062 wydanie 3 z dnia 02.05.2013 r. | |
| 165 | Waste gases | Chlorine emission (calculated) | Procedura Badawcza PB 062 wydanie 3 z dnia 02.05.2013 r. | ||
| 166 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Sampling for determination of butane concentration | Aspiration method | PN-Z-04252-1:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r. | |
| 167 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Concentration/content of butane Range (20,0 - 6000) mg/m3 Range (0,060 – 4,50) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-1:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r. | |
| 168 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Emission of butane (calculated) | PN-Z-04252-1:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r. | ||
| 169 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Sampling for determination of propane concentration | Aspiration method | PN-Z-04252-2:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r. | |
| 170 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Propane concentration/content Range (20 – 4000) mg/m3 Range (0,06 – 3,0) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-2:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r. | |
| 171 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Emission of propane (calculated) | PN-Z-04252-2:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r. | ||
| 172 | Waste gases | Sampling for determination of the concentration of sulfuric (VI) acid and sulfur trioxide | Aspiration method | Procedura Badawcza PB 270 wydanie 2 z dnia 02.05.2013 r. | |
| 173 | Waste gases | Sulphuric acid (VI) and sulphur trioxide concentration Range (0,05 - 10) mg/m3 |
Spectrophotometric method | Procedura Badawcza PB 270 wydanie 2 z dnia 02.05.2013 r. | |
| 174 | Waste gases | Emission of sulphuric acid and sulphur trioxide (calculated) | Procedura Badawcza PB 270 wydanie 2 z dnia 02.05.2013 r. | ||
| 175 | Waste gases | Sampling for the determination of ozone concentration | Aspiration method | Procedura Badawcza PB 341 wydanie 5 z dnia 02.05.2013 r. | |
| 176 | Waste gases | Ozone concentration Range (0,013 - 10) mg/m3 |
Spectrophotometric method | Procedura Badawcza PB 341 wydanie 5 z dnia 02.05.2013 r. | |
| 177 | Waste gases | Ozone emission (calculated) | Procedura Badawcza PB 341 wydanie 5 z dnia 02.05.2013 r. | ||
| 178 | Waste gases | Sampling for determination of the concentration of chromium (VI) compounds expressed as chromium (VI) | Aspiration method | Procedura Badawcza PB 093 wydanie 2 z dnia 23.11.2021 r. | |
| 179 | Waste gases | Concentration of chromium (VI) compounds – calculated as Cr (VI) Range (0,0005 - 0,6) mg/m3 |
Spectrophotometric method | NIOSH 7600:2015 | |
| 180 | Waste gases | Emission of chromium (VI) compounds calculated as chromium (VI) (calculated) | Procedura Badawcza PB 093 wydanie 2 z dnia 23.11.2021 r. | ||
| 181 | Waste gases | Sampling for determination of potassium hydroxide concentration | Aspiration method | Procedura Badawcza PB 435 wydanie 2 z dnia 02.05.2013 r. | |
| 182 | Waste gases | Potassium hydroxide concentration Range (0,05 - 9,5) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | Procedura Badawcza PB 435 wydanie 2 z dnia 02.05.2013 r. | |
| 183 | Waste gases | Emission of potassium hydroxide (calculated) | Procedura Badawcza PB 435 wydanie 2 z dnia 02.05.2013 r. | ||
| 184 | Waste gases | Sampling for determination of sodium hydroxide concentration | Aspiration method | Procedura Badawcza PB 435 wydanie 2 z dnia 02.05.2013 r. | |
| 185 | Waste gases | Sodium hydroxide concentration Range (0,06 - 11,6) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | Procedura Badawcza PB 435 wydanie 2 z dnia 02.05.2013 r. | |
| 186 | Waste gases | Emission of sodium hydroxide (calculated) | Procedura Badawcza PB 435 wydanie 2 z dnia 02.05.2013 r. | ||
| 187 | General environment - waste gas samples collected on a filter | Chromium content Range (0,0025 – 0,625) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | Procedura Badawcza PB 092 wydanie 2 z dnia 02.05.2013 r. | |
| 188 | General environment - waste gas samples collected on a filter | Tin content Range (0,05 – 6) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | Procedura Badawcza PB 095 wydanie 2 z dnia 02.05.2013 r. | |
| 189 | General environment - waste gas samples collected on a filter | 4,4’-methylenebis (phenyl isocyanate) (MDI) content Range (0,0001 - 0,02) mg w próbce |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r. | |
| 190 | General environment - waste gas samples collected on a filter | Toluene-2,4-diyl diisocyanate (2,4-TDI) content Range (0,0001 - 0,02) mg w próbce |
High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) | Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r. | |
| 191 | General environment - waste gas samples collected on a filter | Toluene-2,6-diyl diisocyanate (2,6-TDI) content Range (0,0001 - 0,02) mg w próbce |
High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) | Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r. | |
| 192 | General environment - waste gas samples collected on a filter | Mercury content Range (0,000025 - 0,06) mg w próbce |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006 | |
| 193 | General environment - waste gas samples collected on a filter | Content of chromium (VI) compounds – expressed as Cr (VI) Range (0,0005 - 0,06) mg w próbce |
Spectrophotometric method | NIOSH 7600:2015 | |
| 194 | General environment - waste gas samples collected on sorbent tubes | Formaldehyde content Range (0,00030 - 0,020) mg w próbce |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Procedura Badawcza PB 006A wydanie 2 z dnia 02.05.2013 r. | |
| 195 | General environment - waste gas samples collected on sorbent tubes | Benzene content Range (0,002 - 0,4) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 196 | General environment - waste gas samples collected on sorbent tubes | Content: cyclohexanone, styrene Range (0,05 - 10) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 197 | General environment - waste gas samples collected on sorbent tubes | Content: butan-1-ol hexane xylene – mixture of isomers: 1,2-; 1,3-; 1,4-; cumene 4-methylpentan-2-one toluene trimethylbenzene (trimethylbenzene) – mixture of isomers 1,2,3-; 1,2,4- and 1,3,5- Range (0,1 – 10) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 198 | General environment - waste gas samples collected on sorbent tubes | 2-methylpropan-1-ol (isobutanol) content Range (0,10 – 5,0) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023-02 | NIOSH 1401:1994 | |
| 199 | General environment - waste gas samples collected on sorbent tubes | 2-butoxyethanol content Range (0,1 - 20) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 200 | General environment - waste gas samples collected on sorbent tubes | Content: butan-2-ol ethylbenzene 1-methoxypropan-2-ol 2-butoxyethyl acetate 2-methoxy-1-methylethyl acetate propyl acetate Range (0,2 - 20) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 201 | General environment - waste gas samples collected on sorbent tubes | Content: butan-2-one n-butyl acetate ethyl acetate propan-1-ol propan-2-ol Range (0,2 - 20) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 202 | General environment - waste gas samples collected on sorbent tubes | Content: acetone extraction naphtha acyclic isomers of hexane saturated, except hexane 2,2- dimethylbutane, 2,3-dimethylbutane, 3-methylpentane, 2-methylpentane isopropyl acetate Range (0,2 - 20) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 203 | General environment - waste gas samples collected into absorbing solution | Content of hydrogen cyanide and cyanides – calculated as CN (hydrogen cyanide, sodium cyanide, potassium cyanide, calcium cyanide) Range (0,0005 - 0,05) mg w próbce |
Potentiometric method | Procedura Badawcza PB 094A wydanie 3 z dnia 02.05.2013 r. | |
| 204 | General environment - waste gas samples collected into absorbing solution | Hydrogen fluoride and fluoride content calculated as F- Range (0,001 - 0,1) mg w próbce |
Potentiometric method | Procedura Badawcza PB 192 wydanie 5 z dnia 02.05.2013 r. | |
| 205 | General environment - waste gas samples collected into absorbing solution | Ammonia content Range (0,0002 – 0,08) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 019 wydanie 4 z dnia 02.05.2013 r. | PN-EN ISO 21877:2020-03 | |
| 206 | General environment - waste gas samples collected into absorbing solution | Chlorine content Range (0,001 - 0,05) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 062 wydanie 3 z dnia 02.05.2013 r. | |
| 207 | General environment - waste gas samples collected into absorbing solution | Hydrogen chloride content Range (0,01 - 0,2) mg w próbce |
Spectrophotometric method | PN-EN 1911:2011 | |
| 208 | General environment - waste gas samples collected into absorbing solution | Sulphuric (VI) acid and sulphur trioxide content Range (0,025 - 0,55) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 270 wydanie 2 z dnia 02.05.2013 r. | |
| 209 | General environment - waste gas samples collected into absorbing solution | Ozone content Range (0,0002 – 0,005) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 341 wydanie 5 z dnia 02.05.2013 r. | |
| 210 | General environment - waste gas samples collected into absorbing solution | Potassium hydroxide content Range (0,0007 - 0,014) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | Procedura Badawcza PB 435 wydanie 2 z dnia 02.05.2013 r. | |
| 211 | General environment - waste gas samples collected into absorbing solution | Sodium hydroxide content Range (0,0009 - 0,018) mg w próbce |
Flame atomic absorption spectrometry (FAAS) | Procedura Badawcza PB 435 wydanie 2 z dnia 02.05.2013 r. | |
| 212 | General environment - waste gas samples collected into absorbing solution | Hydrogen sulphide content Range (0,005 – 0,05) mg w próbce |
Spectrophotometric method | Procedura Badawcza PB 370 wydanie 5 z dnia 02.05.2013 r. | |
| 213 | General environment - waste gas samples collected into absorbing solution | Formaldehyde content Range (0,00050 – 0,020) mg w próbce |
Spectrophotometric method | CEN/TS 17638:2021 Procedura Badawcza PB 197 wydanie 2 z dnia 21.11.2022 r. | |
| 214 | General environment - waste gas samples collected into absorbing solution | Mercury content Range (0,000025 - 0,06) mg w próbce |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006 | |
| 215 | General environment - waste gas samples collected into absorbing solution - waste gas samples collected on sorbent tubes | Methanol content Range (0,080 – 6,0) mg w próbce |
Gas chromatography with flame ionization detection (GC-FID) | Procedura Badawcza PB 272 wydanie 2 z dnia 02.05.2013 r. | PN-EN 13649:2005 | PN-Z-04476:2016-10 | |
Reference standards (106)
CEN/TS 17638:2021 Procedura Badawcza PB 197 wydanie 2 z dnia 21.11.2022 r.
NIOSH 1401:1994
NIOSH 7600:2015
PN ISO 10396:2001
PN-71/Z-04041
PN-75/Z-04037.03
PN-77/Z-04110/01
PN-78/Z-04112/01
PN-78/Z-04113/02
PN-81/Z-04028.01
PN-81/Z-04134.03
PN-83/Z-04118/02
PN-85/Z-04140/02
PN-86/Z-04113/05
PN-87/Z-04005.05
PN-87/Z-04100/03
PN-87/Z-04178/02
PN-88/Z-04005.06
PN-88/Z-04196.02
PN-89/Z-04023-02
PN-89/Z-04159/10
PN-89/Z-04208/04
PN-89/Z-04208/05
PN-92/Z-04113/09
PN-92/Z-04227.02
PN-EN 12619:2013-05
PN-EN 13211+AC:2006
PN-EN 13284-1:2018-02 CEN/TR 17078:2017
PN-EN 13649:2005
PN-EN 14253+A1:2011
PN-EN 14790:2017-04
PN-EN 1838:2025-05 Metoda A
PN-EN 1911:2011
PN-EN ISO 11079:2008
PN-EN ISO 21877:2020-03
PN-EN ISO 5349-1:2004
PN-EN ISO 5349-2:2004
PN-EN ISO 5349-2:2004 / A1:2015
PN-EN ISO 7243:2018 -01
PN-EN ISO 7730:2006
PN-EN ISO 7730:2006/Ap2:2016-04
PN-EN ISO 9612:2011 z wyłączeniem metod obejmujących Strategię 2 - pkt. 10 i Strategię 3 - pkt. 11
PN-N-01307:1994
PN-Z-04008-4:1999
PN-Z-04008-7:2002+Az1:2004
PN-Z-04009-11:2008
PN-Z-04015-12:1996
PN-Z-04015-13:1996
PN-Z-04030-7:1994
PN-Z-04073-1:2014-08
PN-Z-04102-3:2013-10
PN-Z-04106-3:2002
PN-Z-04108-5:2006
PN-Z-04108-6:2006+Az1:2009
PN-Z-04216-2:2012 Podstawy i Metody Oceny Środowiska Pracy 1998, nr 19 s. 165 – 169
PN-Z-04252-1:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r.
PN-Z-04252-2:2012 Procedura Badawcza PB 052 wydanie 2 z dnia 02.05.2013 r.
PN-Z-04300:2002
PN-Z-04318:2005
PN-Z-04323:2004
PN-Z-04332:2006 Procedura Badawcza PB 366 wydanie 6 z dnia 02.05.2022 r.
PN-Z-04422:2010
PN-Z-04423:2011
PN-Z-04429:2011
PN-Z-04435:2011
PN-Z-04436:2011
PN-Z-04442:2023-05
PN-Z-04469:2015-10
PN-Z-04472:2015-10+Ap1:2015-12
PN-Z-04476:2016-10
PN-Z-04486:2017-10
PN-Z-04487:2017-10
PN-Z-04488:2017-10
PN-Z-04490:2017-10
PN-Z-04502:2019-10
PN-Z-04507:2022-05
PN-Z-04507:2022-05+Ap1:2022-08
PN-Z-04508:2022-05
PN-Z-04508:2022-05+Ap1:2022-08
Podstawy i Metody Oceny Środowiska Pracy 1997, nr 17 s. 55 – 59
Podstawy i Metody Oceny Środowiska Pracy 2012, nr 4(74) s. 117-130
Procedura Badawcza PB 006 wydanie 4 z dnia 02.05.2013 r.
Procedura Badawcza PB 006A wydanie 2 z dnia 02.05.2013 r.
Procedura Badawcza PB 007 wydanie 3 z dnia 02.05.2013 r.
Procedura Badawcza PB 019 wydanie 4 z dnia 02.05.2013 r.
Procedura Badawcza PB 025 wydanie 3 z dnia 02.05.2013 r.
Procedura Badawcza PB 062 wydanie 3 z dnia 02.05.2013 r.
Procedura Badawcza PB 089 wydanie 2 z dnia 02.05.2013 r.
Procedura Badawcza PB 092 wydanie 2 z dnia 02.05.2013 r.
Procedura Badawcza PB 093 wydanie 2 z dnia 23.11.2021 r.
Procedura Badawcza PB 094A wydanie 3 z dnia 02.05.2013 r.
Procedura Badawcza PB 095 wydanie 2 z dnia 02.05.2013 r.
Procedura Badawcza PB 12464 Wydanie 3 z 02.05.2016 r.
Procedura Badawcza PB 136A wydanie 2 z dnia 02.05.2013 r.
Procedura Badawcza PB 148A wydanie 1 z dnia 02.05.2024 r.
Procedura Badawcza PB 192 wydanie 5 z dnia 02.05.2013 r.
Procedura Badawcza PB 196 wydanie 4 z dnia 02.05.2013 r.
Procedura Badawcza PB 270 wydanie 2 z dnia 02.05.2013 r.
Procedura Badawcza PB 272 wydanie 2 z dnia 02.05.2013 r.
Procedura Badawcza PB 299 wydanie 5 z dnia 02.05.2023 r.
Procedura Badawcza PB 341 wydanie 5 z dnia 02.05.2013 r.
Procedura Badawcza PB 370 wydanie 5 z dnia 02.05.2013 r.
Procedura Badawcza PB 398 wydanie 2 z dnia 02.05.2013 r.
Procedura Badawcza PB 425 wydanie 4 z dnia 02.05.2013 r.
Procedura Badawcza PB 435 wydanie 2 z dnia 02.05.2013 r.
Procedura Badawcza PB 90 wydanie 1 z dnia 02.05.2021 r.