🇵🇱 WOJSKOWY INSTYTUT TECHNIKI PL
Materials & polymers
WOJSKOWY INSTYTUT TECHNIKI is a laboratory accredited by PCA under number AB 083 (Poland). Its accreditation scope covers 11 test methods in the following areas: Materials & polymers. Test objects include: Metals, metal alloys Products made of metallic materials, Structural materials, including armour and armour shields Additiona…, Metals, metal alloys, non-metals, ceramics, textile materials, poly…, Iron alloys.
At a glance
- Accreditation number: PCA AB 083
- Methods in scope: 11
- Types of test objects: 5
- Accreditation number
- AB 083
- Accreditation body
- PCA
- Address
- PANCERNEJ I SAMOCHODOWEJ, LABORATORIUM INŻYNIERII MATERIAŁOWEJ, ul. Okuniewska 1
- City
- Poland
What this laboratory tests (5)
- Metals, metal alloys Products made of metallic materials — 4 methods
- Structural materials, including armour and armour shields Additional anti-armour shields Bullet-resistant glazing Doors, windows, blinds and curtains — 3 methods
- Metals, metal alloys, non-metals, ceramics, textile materials, polymer composites, plastics, rubber — 2 methods
- Iron alloys — 1 method
- Metals, metal alloys, non-metals, ceramics, composites, plastics — 1 method
Accreditation scope — test methods (11)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Metals, metal alloys Products made of metallic materials | HBW hardness Range: ball diameter 2,5 mm, 5 mm Brinell method | PN-EN ISO 6506-1:2014-12 | ||
| 2 | Metals, metal alloys Products made of metallic materials | HRB, HRC hardness Range: scale B, C Rockwell method | PN-EN ISO 6508-1:2016-10 | ||
| 3 | Metals, metal alloys Products made of metallic materials | HV hardness Range: HV 5, HV 10, HV 30 Vickers method | PN-EN ISO 6507-1:2018-05 | ||
| 4 | Metals, metal alloys Products made of metallic materials | Absorbed energy Range: KV KU 2; 2 Initial hammer energy: 300 J Test temperature: - (23 ± 5) ˚C - temperature reduced to -40 ˚C Charpy impact test | PN-EN ISO 148-1:2017-02 | ||
| 5 | Iron alloys | Content of elements: C, Mn, Si, P, S, Cr, Ni, Cu, Mo, V, Al, W, Ti, Mg Range: C (0,01 -1,5) % Mn (0,01 - 1,7) % Si (0,01 - 2,5) % P (0,005 - 0,1) % S (0,005 - 0,1) % Cr (0,01 - 20,0) % Ni (0,02 – 12,0) % Cu (0,01 - 0,4) % Mo (0,01 – 4,0) % V (0,01 - 0,6) % Al (0,005 - 0,2) % W (0,01 – 2,0) % Ti (0,01 - 0,3) % Mg (0,01 - 0,1) % Method: Spark atomic emission spectrometry | PN-H-04045:1997 PB 05/LIM | ||
| 6 | Metals, metal alloys, non-metals, ceramics, textile materials, polymer composites, plastics, rubber | Microstructure Fracture features Chemical composition: - qualitative analysis Scanning electron microscopy | PB 30/LIM, wyd. 4 z 17.03.2021 r. | ||
| 7 | Metals, metal alloys, non-metals, ceramics, textile materials, polymer composites, plastics, rubber | Resistance to climatic conditions Range: - temperature (-50 ÷ 150) ˚C - relative humidity up to 98 % | PB 41/LIM, wyd. 4 z 17.03.2021 r. | ||
| 8 | Metals, metal alloys, non-metals, ceramics, composites, plastics | Surface geometry: - roughness - waviness Contact profilometry method | PN-EN ISO 4287:1999 PN-EN ISO 21920-2:2022-06 PN-74/M-04255 | ||
| 9 | Structural materials, including armour and armour shields Additional anti-armour shields Bullet-resistant glazing Doors, windows, blinds and curtains | Bullet resistance Range: projectile calibre up to 30 mm Method for testing resistance to penetration by projectiles | STANAG 4569, edycja 3 STANAG 4569, edycja 4 PN-EN 1523:2000 PN-EN 1063:2002 PB 11/LIM, wyd. 7 z 25.03.2025 r. | ||
| 10 | Structural materials, including armour and armour shields Additional anti-armour shields Bullet-resistant glazing Doors, windows, blinds and curtains | Ballistic limit V50 Range: standard projectiles and fragments Penetration resistance test method | MIL-STD-662F wyd. XII 1997 MIL-DTL-46100E z 11.02.2009 MIL-DTL-12560K z 11.09.2020 PB 46/LIM, wyd. 2 z 17.03.2021 r. | ||
| 11 | Structural materials, including armour and armour shields Additional anti-armour shields Bullet-resistant glazing Doors, windows, blinds and curtains | Determination of the critical ricochet angle | PB 51/LIM z 31.08.2023 | ||
Reference standards (11)
MIL-STD-662F wyd. XII 1997 MIL-DTL-46100E z 11.02.2009 MIL-DTL-12560K z 11.09.2020 PB 46/LIM, wyd. 2 z 17.03.2021 r.
PB 30/LIM, wyd. 4 z 17.03.2021 r.
PB 41/LIM, wyd. 4 z 17.03.2021 r.
PB 51/LIM z 31.08.2023
PN-EN ISO 148-1:2017-02
PN-EN ISO 4287:1999 PN-EN ISO 21920-2:2022-06 PN-74/M-04255
PN-EN ISO 6506-1:2014-12
PN-EN ISO 6507-1:2018-05
PN-EN ISO 6508-1:2016-10
PN-H-04045:1997 PB 05/LIM
STANAG 4569, edycja 3 STANAG 4569, edycja 4 PN-EN 1523:2000 PN-EN 1063:2002 PB 11/LIM, wyd. 7 z 25.03.2025 r.