🇵🇱 POLSKIE CENTRUM BADAŃ I CERTYFIKACJI S. A. PL
ConstructionMaterials & polymersEnvironmentWater & wastewater
POLSKIE CENTRUM BADAŃ I CERTYFIKACJI S. A. is a laboratory accredited by PCA under number AB 011 (Gdańsk, Poland). Its accreditation scope covers 100 test methods in the following areas: Construction, Materials & polymers, Environment, Water & wastewater. Test objects include: Thermal insulation products for buildingsE, Flexible sheets for waterproofingE, Masonry unitsE, Thermal insulation products for buildings.
At a glance
- Accreditation number: PCA AB 011
- Methods in scope: 100
- Types of test objects: 19
- City: Gdańsk, Poland
- Accreditation number
- AB 011
- Accreditation body
- PCA
- Address
- ul. Puławska 469, 02-844 Warszawa, LABORATORIUM WYROBÓW BUDOWLANYCH, ul. Jakuba Wejhera 18a, 80-346 Gdańsk
- City
- Gdańsk, Poland
What this laboratory tests (19)
- Thermal insulation products for buildingsE — 23 methods
- Flexible sheets for waterproofingE — 15 methods
- Masonry unitsE — 13 methods
- Thermal insulation products for buildings — 11 methods
- Concrete paving blocks Concrete paving flags Concrete kerb unitsE — 9 methods
- Building materials and raw materialsE Waste o) code: 10 01, 17 01, 17 09, 19 12, 20 01 — 6 methods
- 99/90/EC — 5 methods
- Clay paving unitsE — 4 methods
- Aggregates — 3 methods
- Masonry units — 2 methods
- 99/91/EC — 1 method
- ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTING (System 3) — 1 method
- Building materials and construction productsE — 1 method
- Clay pavers — 1 method
- Commission decision number — 1 method
- and 4 more
Accreditation scope — test methods (100)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Building materials and raw materialsE Waste o) code: 10 01, 17 01, 17 09, 19 12, 20 01 | Activity concentration of radionuclide: 40K Range: (50-9000) Bq/kg Gamma-ray spectrometry | nr 455/2010 | Instrukcja Badawcza IGL-B-1 wydanie 1 z 30.01.2023 | ||
| 2 | Building materials and raw materialsE Waste o) code: 10 01, 17 01, 17 09, 19 12, 20 01 | Activity concentration of radionuclide 214Bi Range: (15-1700) Bq/kg Gamma-ray spectrometry | |||
| 3 | Building materials and raw materialsE Waste o) code: 10 01, 17 01, 17 09, 19 12, 20 01 | Activity concentration of radionuclide 208Tl Range: (10-600) Bq/kg Gamma-ray spectrometry | |||
| 4 | Building materials and raw materialsE Waste o) code: 10 01, 17 01, 17 09, 19 12, 20 01 | Radionuclide activity concentration: 226Ra (calculated) | |||
| 5 | Building materials and raw materialsE Waste o) code: 10 01, 17 01, 17 09, 19 12, 20 01 | Radionuclide activity concentration: 232Th (calculated) | |||
| 6 | Building materials and raw materialsE Waste o) code: 10 01, 17 01, 17 09, 19 12, 20 01 | Activity concentration index I (calculated) | |||
| 7 | Building materials and construction productsE | Water vapour transport: - permeability - resistance - transmission coefficient (Dish method) | PN-EN ISO 12572 „N” | ||
| 8 | Masonry unitsE | Dimensions | PN-EN 772-16 | ||
| 9 | Masonry unitsE | Compressive strength | PN-EN 772-1 | ||
| 10 | Masonry unitsE | Net volume and percentage of voids determined by hydrostatic weighing | PN-EN 772-3 | ||
| 11 | Masonry unitsE | Gross volume, net volume and percentage of voids determined by filling with sand | PN-EN 772-9 | ||
| 12 | Masonry unitsE | Net density and gross dry density | PN-EN 772-13 | ||
| 13 | Masonry unitsE | Water absorption determined by boiling in water | PN-EN 772-7 | ||
| 14 | Masonry unitsE | Initial water absorption | PN-EN 772-11 | ||
| 15 | Masonry unitsE | Water absorption | PN-EN 772-21 | ||
| 16 | Masonry unitsE | Freeze-thaw resistance | PN-EN 772-18 | ||
| 17 | Masonry unitsE | Freeze-thaw resistance | PN-B-12012 | ||
| 18 | Masonry unitsE | Gross heat of combustion (calorific value) | PN-EN ISO 1716 | ||
| 19 | Masonry unitsE | Non-combustibility: - relative mass loss - duration of flaming - temperature rise | PN-EN ISO 1182 | ||
| 20 | Masonry unitsE | Thermal conductivity | PN-ISO 8301 PN-EN 12667 PN-EN 12939 | ||
| 21 | Clay paving unitsE | Dimensions | PN-EN 1344, załącznik B | ||
| 22 | Clay paving unitsE | Freeze/thaw resistance | PN-EN 1344, załącznik C | ||
| 23 | Clay paving unitsE | Failure load range: (2 – 150) kN | PN-EN 1344, załącznik D | ||
| 24 | Clay paving unitsE | Abrasion resistance | PN-EN 1344, załącznik E | ||
| 25 | Flexible sheets for waterproofingE | Visible defects | PN-EN 1850-1 PN-EN 1850-2 | ||
| 26 | Flexible sheets for waterproofingE | Length, width, straightness | PN-EN 1848-1 PN-EN 1848-2 | ||
| 27 | Flexible sheets for waterproofingE | Thickness, grammage | PN-EN 1849-1 PN-EN 1849-2 | ||
| 28 | Flexible sheets for waterproofingE | Tensile mechanical properties | PN-EN 12311-1 PN-EN 12311-2 | ||
| 29 | Flexible sheets for waterproofingE | Tear resistance (nail) | PN-EN 12310-1 | ||
| 30 | Flexible sheets for waterproofingE | Tear strength | PN-EN 12310-2 | ||
| 31 | Flexible sheets for waterproofingE | Resistance to sagging at elevated temperature | PN-EN 1110 | ||
| 32 | Flexible sheets for waterproofingE | Flexibility at low temperature | PN-EN 1109 | ||
| 33 | Flexible sheets for waterproofingE | Shear strength of joints | PN-EN 12317-1 PN-EN 12317-2 | ||
| 34 | Flexible sheets for waterproofingE | Watertightness | PN-EN 1928 „N” | ||
| 35 | Flexible sheets for waterproofingE | Impact resistance | PN-EN 12691 | ||
| 36 | Flexible sheets for waterproofingE | Resistance to static load | PN-EN 12730 | ||
| 37 | Flexible sheets for waterproofingE | Resistance to water seepage | PN-EN 13111 „N” | ||
| 38 | Flexible sheets for waterproofingE | Ignitability by the single-flame source method: - flame spread - occurrence of flaming droplets | PN-EN ISO 11925-2 „N” | ||
| 39 | Flexible sheets for waterproofingE | Water vapour transmission | PN-EN 1931 „N” | ||
| 40 | Concrete paving blocks Concrete paving flags Concrete kerb unitsE | Dimensions of a single element | PN-EN 1338, załącznik C PN-EN 1339, załącznik C PN-EN 1340, załącznik C | ||
| 41 | Concrete paving blocks Concrete paving flags Concrete kerb unitsE | Freeze/thaw resistance with de-icing salt | PN-EN 1338, załącznik D PN-EN 1339, załącznik D PN-EN 1340, załącznik D | ||
| 42 | Concrete paving blocks Concrete paving flags Concrete kerb unitsE | Water absorption Gravimetric method | PN-EN 1338, załącznik E PN-EN 1339, załącznik E PN-EN 1340, załącznik E | ||
| 43 | Concrete paving blocks Concrete paving flags Concrete kerb unitsE | Splitting tensile strength | PN-EN 1338, załącznik F | ||
| 44 | Concrete paving blocks Concrete paving flags Concrete kerb unitsE | Bending strength and breaking load | PN-EN 1339, załącznik F | ||
| 45 | Concrete paving blocks Concrete paving flags Concrete kerb unitsE | Flexural strength | PN-EN 1340, załącznik F | ||
| 46 | Concrete paving blocks Concrete paving flags Concrete kerb unitsE | Abrasion resistance Wide abrasive wheel method | PN-EN 1338, załącznik G PN-EN 1339, załącznik G PN-EN 1340, załącznik G | ||
| 47 | Concrete paving blocks Concrete paving flags Concrete kerb unitsE | Slip resistance of the unpolished surface (USRV) | PN-EN 1338, załącznik I PN-EN 1339, załącznik I PN-EN 1340, załącznik I | ||
| 48 | Concrete paving blocks Concrete paving flags Concrete kerb unitsE | Appearance | PN-EN 1338, załącznik J PN-EN 1339, załącznik J PN-EN 1340, załącznik J | ||
| 49 | Thermal insulation products for buildingsE | Squareness | PN-EN 824 | ||
| 50 | Thermal insulation products for buildingsE | Dimensional stability under constant normal laboratory conditions 23 °C / 50 % relative humidity | PN-EN 1603 | ||
| 51 | Thermal insulation products for buildingsE | Dimensional stability under specified temperature and humidity conditions | PN-EN 1604 | ||
| 52 | Thermal insulation products for buildingsE | Tensile strength under a force perpendicular to the faces | PN-EN 1607 | ||
| 53 | Thermal insulation products for buildingsE | Behaviour in bending | PN-EN 12089 | ||
| 54 | Thermal insulation products for buildingsE | Behaviour in shear | PN-EN 12090 | ||
| 55 | Thermal insulation products for buildingsE | Behaviour under point load | PN-EN 12430 „N” | ||
| 56 | Thermal insulation products for buildingsE | Non-combustibility: - relative mass loss - duration of flaming - temperature rise | PN-EN ISO 1182 „N” | ||
| 57 | Thermal insulation products for buildingsE | Thermal conductivity | PN-ISO 8301 „N” PN-EN 12667 „N” PN-EN 12939 „N” | ||
| 58 | Thermal insulation products for buildingsE | Gross heat of combustion (calorific value) | PN-EN ISO 1716 „N” | ||
| 59 | Thermal insulation products for buildingsE | Ignitability by the single-flame source method: - flame spread - occurrence of flaming droplets | PN-EN ISO 11925-2 „N” | ||
| 60 | Thermal insulation products for buildingsE | Water absorption by short-term, partial immersion | PN-EN ISO 29767 „N” | ||
| 61 | Thermal insulation products for buildingsE | Water absorption by long-term immersion | PN-EN ISO 16535 „N” | ||
| 62 | Thermal insulation products for buildingsE | Water absorption by long-term diffusion | PN-EN ISO 16536 „N” | ||
| 63 | Thermal insulation products for buildingsE | Length and width | PN-EN ISO 29465 | ||
| 64 | Thermal insulation products for buildingsE | Thickness | PN-EN ISO 29466 „N” | ||
| 65 | Thermal insulation products for buildingsE | Flatness | PN-EN ISO 29468 „N” | ||
| 66 | Thermal insulation products for buildingsE | Behaviour in compression | PN-EN ISO 29469 „N” | ||
| 67 | Thermal insulation products for buildingsE | Linear dimensions | PN-EN ISO 29768 | ||
| 68 | Thermal insulation products for buildingsE | Thickness | PN-EN ISO 29770 | ||
| 69 | Thermal insulation products for buildingsE | Apparent density | PN-EN ISO 29470 | ||
| 70 | Thermal insulation products for buildingsE | Freeze-thaw resistance | PN-EN ISO 16546 | ||
| 71 | Thermal insulation products for buildingsE | Water vapour permeability Gravimetric method | PN-EN 12086 | ||
| 72 | Thick-layer polymer-modified bituminous coatings for waterproofingE | Watertightness | PN-EN 15820 „N” | ||
| 73 | Masonry units | Compressive strength range: (100 – 5000) kN | PN-EN 772-1:2011 | ||
| 74 | Masonry units | Flatness of the facing surfaces | PN-EN 772-20:2002 PN-EN 772-20:2002/A1:2005 | ||
| 75 | Clay pavers | Slip/skid resistance of the unpolished surface | PN-EN 1344:2004 załącznik F | ||
| 76 | Aggregates | Frost resistance in water | PN-EN 1367-1:2007 | ||
| 77 | Aggregates | Freeze-thaw resistance in salt | PN-EN 1367-6:2008 | ||
| 78 | Aggregates | Grain composition range: (0 – 63) mm Sieving method | PN-EN 933-1:2012 | ||
| 79 | Mineral binders | Compressive strength range: (1 – 300) kN Flexural strength range: (1 – 15) kN | PN-EN 196-1:2016-07 | ||
| 80 | Mortars | Compressive strength range: (1 – 300) kN Flexural strength range: (1-15) kN | PN-EN 1015-11:2020-04 | ||
| 81 | Thermal insulation products for buildings | Water absorption by short-term, partial immersion | PN-EN 1609:2013-07 | ||
| 82 | Thermal insulation products for buildings | Water absorption by long-term immersion | PN-EN 12087:2013-07 | ||
| 83 | Thermal insulation products for buildings | Water absorption by long-term diffusion | PN-EN 12088:2013-07 | ||
| 84 | Thermal insulation products for buildings | Length and width | PN-EN 822:2013-07 | ||
| 85 | Thermal insulation products for buildings | Thickness | PN-EN 823:2013-07 | ||
| 86 | Thermal insulation products for buildings | Flatness | PN-EN 825:2013-07 | ||
| 87 | Thermal insulation products for buildings | Behaviour in compression range: (0,01 – 50) kN | PN-EN 826:2013-07 | ||
| 88 | Thermal insulation products for buildings | Linear dimensions | PN-EN 12085:2013-07 | ||
| 89 | Thermal insulation products for buildings | Thickness | PN-EN 12431:2013-07 | ||
| 90 | Thermal insulation products for buildings | Apparent density | PN-EN 1602:2013-07 | ||
| 91 | Thermal insulation products for buildings | Freeze-thaw resistance Compressive force: (0,01 – 50) kN | PN-EN 12091:2013-07 | ||
| 92 | Type of activity: | Reference document: | |||
| 93 | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTING (System 3) | Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC | |||
| 94 | Commission decision number | Product(s) | Zharmonizowane specyfikacje techniczne | ||
| 95 | 99/90/EC | Membranes Roofing underlays | EN 13859-1:2010 | ||
| 96 | 99/90/EC | Membranes Water vapour control layers | EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2013 | ||
| 97 | 99/90/EC | Membranes Damp proof insulating layers | EN 14909:2012 EN 14967:2006 EN 13967:2012 EN 13969:2004 EN 13969:2004/A1:2006 | ||
| 98 | 99/90/EC | Membranes Roofing sheets | EN 13707:2004+A2:2009 EN 13956:2012 | ||
| 99 | 99/90/EC | Membranes Damp proof insulating layers | EN 15814+A2:2014 | ||
| 100 | 99/91/EC | Thermal insulation products (factory-made products and products intended for in-situ formation on site) | EN 13162:2012+A1:2015 EN 13163:2012+A1:2015 EN 13164:2012+A1:2015 EN 13165:2012+A2:2016 EN 13171:2012+A1:2015 EN 14064-1:2010 EN 14315-1:2013 | ||
Reference standards (93)
EN 13162:2012+A1:2015 EN 13163:2012+A1:2015 EN 13164:2012+A1:2015 EN 13165:2012+A2:2016 EN 13171:2012+A1:2015 EN 14064-1:2010 EN 14315-1:2013
EN 13707:2004+A2:2009 EN 13956:2012
EN 13859-1:2010
EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2013
EN 14909:2012 EN 14967:2006 EN 13967:2012 EN 13969:2004 EN 13969:2004/A1:2006
EN 15814+A2:2014
Instrukcja Badawcza IGL-B-1 wydanie 1 z 30.01.2023
PN-B-12012
PN-EN 1015-11:2020-04
PN-EN 1109
PN-EN 1110
PN-EN 12085:2013-07
PN-EN 12086
PN-EN 12087:2013-07
PN-EN 12088:2013-07
PN-EN 12089
PN-EN 12090
PN-EN 12091:2013-07
PN-EN 12310-1
PN-EN 12310-2
PN-EN 12311-1 PN-EN 12311-2
PN-EN 12317-1 PN-EN 12317-2
PN-EN 12430 „N”
PN-EN 12431:2013-07
PN-EN 12691
PN-EN 12730
PN-EN 13111 „N”
PN-EN 1338, załącznik C PN-EN 1339, załącznik C PN-EN 1340, załącznik C
PN-EN 1338, załącznik D PN-EN 1339, załącznik D PN-EN 1340, załącznik D
PN-EN 1338, załącznik E PN-EN 1339, załącznik E PN-EN 1340, załącznik E
PN-EN 1338, załącznik F
PN-EN 1338, załącznik G PN-EN 1339, załącznik G PN-EN 1340, załącznik G
PN-EN 1338, załącznik I PN-EN 1339, załącznik I PN-EN 1340, załącznik I
PN-EN 1338, załącznik J PN-EN 1339, załącznik J PN-EN 1340, załącznik J
PN-EN 1339, załącznik F
PN-EN 1340, załącznik F
PN-EN 1344, załącznik B
PN-EN 1344, załącznik C
PN-EN 1344, załącznik D
PN-EN 1344, załącznik E
PN-EN 1344:2004 załącznik F
PN-EN 1367-1:2007
PN-EN 1367-6:2008
PN-EN 15820 „N”
PN-EN 1602:2013-07
PN-EN 1603
PN-EN 1604
PN-EN 1607
PN-EN 1609:2013-07
PN-EN 1848-1 PN-EN 1848-2
PN-EN 1849-1 PN-EN 1849-2
PN-EN 1850-1 PN-EN 1850-2
PN-EN 1928 „N”
PN-EN 1931 „N”
PN-EN 196-1:2016-07
PN-EN 772-1
PN-EN 772-11
PN-EN 772-13
PN-EN 772-16
PN-EN 772-18
PN-EN 772-1:2011
PN-EN 772-20:2002 PN-EN 772-20:2002/A1:2005
PN-EN 772-21
PN-EN 772-3
PN-EN 772-7
PN-EN 772-9
PN-EN 822:2013-07
PN-EN 823:2013-07
PN-EN 824
PN-EN 825:2013-07
PN-EN 826:2013-07
PN-EN 933-1:2012
PN-EN ISO 1182
PN-EN ISO 1182 „N”
PN-EN ISO 11925-2 „N”
PN-EN ISO 12572 „N”
PN-EN ISO 16535 „N”
PN-EN ISO 16536 „N”
PN-EN ISO 16546
PN-EN ISO 1716
PN-EN ISO 1716 „N”
PN-EN ISO 29465
PN-EN ISO 29466 „N”
PN-EN ISO 29468 „N”
PN-EN ISO 29469 „N”
PN-EN ISO 29470
PN-EN ISO 29767 „N”
PN-EN ISO 29768
PN-EN ISO 29770
PN-ISO 8301 PN-EN 12667 PN-EN 12939
PN-ISO 8301 „N” PN-EN 12667 „N” PN-EN 12939 „N”
Zharmonizowane specyfikacje techniczne
nr 455/2010