🇵🇱 URZĄD DOZORU TECHNICZNEGO PL
Materials & polymersConstructionEnvironmentElectronics & EMCPetrochemistry & fuels
URZĄD DOZORU TECHNICZNEGO is a laboratory accredited by PCA under number AB 001 (Warszawa, Poland). Its accreditation scope covers 271 test methods in the following areas: Materials & polymers, Construction, Environment, Electronics & EMC. Test objects include: Technical equipment, steel and building structures, their component…, Welded joints in metallic materials, Metals and metal alloys, Technical equipment, its components, safety devices, protective aut…. Most frequently used techniques: Ultrasonic method, Magnetic particle method, Spark excitation atomic emission spectrometry (OES).
At a glance
- Accreditation number: PCA AB 001
- Methods in scope: 271
- Types of test objects: 88
- Techniques used: 20
- City: Warszawa, Poland
- Accreditation number
- AB 001
- Accreditation body
- PCA
- Address
- CENTRALNE LABORATORIUM DOZORU TECHNICZNEGO, ul. Szczęśliwicka 34, 02-353 Warszawa
- City
- Warszawa, Poland
What this laboratory tests (88)
- Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems — 11 methods
- Welded joints in metallic materials — 10 methods
- Metals and metal alloys — 8 methods
- Technical equipment, its components, safety devices, protective automation and control systems — 8 methods
- Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints — 8 methods
- Castings — 5 methods
- Castings of ferromagnetic materials — 5 methods
- Equipment fitted with electrical and electronic accessories — 5 methods
- Ferromagnetic metal products and materials — 5 methods
- Ferromagnetic steel pipes — 5 methods
- Flat steel products — 5 methods
- Forgings — 5 methods
- Forgings of ferromagnetic materials — 5 methods
- Metallic and non-metallic products and materials — 5 methods
- Metallic and non-metallic products and materials, welded joints — 5 methods
- and 73 more
Analytical techniques used (20)
- Ultrasonic method — 31 methods
- Magnetic particle method — 25 methods
- Spark excitation atomic emission spectrometry (OES) — 25 methods
- Penetrant testing method — 20 methods
- Radiographic method — 12 methods
- Visual method — 11 methods
- UCI method — 4 methods
- Direct measurement method — 3 methods
- Magnetic induction method — 2 methods
- Resistance strain gauge method — 2 methods
- Gravimetric method — 1 method
- Gravimetric method; Spectrophotometric method — 1 method
- Hydraulic method; Pneumatic method — 1 method
- Immersion method — 1 method
- Indicative method — 1 method
- and 5 more
Laboratory sections (5)
- LABORATORY TESTING DEPARTMENT (OL) IN POZNAŃ — 166 methods
- LABORATORY TESTING DEPARTMENT (OL) IN WARSAW — 44 methods
- LABORATORY TESTING DEPARTMENT (OL) IN KRAKÓW — 24 methods
- LABORATORY TESTING DEPARTMENT (OL) IN PŁOCK — 17 methods
- LABORATORY TESTING DEPARTMENT (OL) IN GLIWICE — 15 methods
Laboratory locations
- DZIAŁ BADAŃ LABORATORYJNYCH (OL) W POZNANIU — ul. Ostrowska 388, 61-312 Poznań
- DZIAŁ BADAŃ LABORATORYJNYCH (OL) W WARSZAWIE — ul. Al. Jerozolimskie 172, 02-486 Warszawa
- DZIAŁ BADAŃ LABORATORYJNYCH (OL) W PŁOCKU — ul. Kilińskiego 10c, 09-402 Płock
- DZIAŁ BADAŃ LABORATORYJNYCH (OL) W KRAKOWIE — ul. Rydla 50, 30-087 Kraków
- DZIAŁ BADAŃ LABORATORYJNYCH (OL) W GLIWICACH — ul. Robotnicza 4A, 44-100 Gliwice
- Laboratorium spełnia wymagania określone w Rozporządzeniu Nr 305/2011 z dnia 9 marca 2011 r. —
Accreditation scope — test methods (271)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| LABORATORY TESTING DEPARTMENT (OL) IN POZNAŃ | |||||
| 1 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints, protective automation and control systems | Linear dimension Range 0,001 mm - 30 m or its multiples |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/30 | ||
| 2 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints, protective automation and control systems | Angular dimension Range (0 - 360)° |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/31 | ||
| 3 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Shape, Qualitative testing | LW-1/IN/38 wyd. 2 z dnia 16.03.2020 | ||
| 4 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Speed determined by an indirect method using distance and time measurement in any range | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/41 | ||
| 5 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Electrical resistance Range 1 mΩ - 1 TΩ |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/55 | ||
| 6 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Electrical insulation resistance for Upr=250 V from 100 MΩ do 10 GΩ for Upr=500 V from 100 MΩ do 10 GΩ for Upr=1000 V from 100 MΩ do 10 GΩ for Upr=2500 V from 100 MΩ do 1 GΩ |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/61 | ||
| 7 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Electric current direct current from 10 μA do 600 A alternating current from 10 μA to Range 1000 A |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/52 | ||
| 8 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Dynamic and static stresses Range (0 - 4000) MPa |
Resistance strain gauge method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/44 wyd. 2.00 z dnia 09.06.2023 | |
| 9 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Illuminance Range (0 - 10 000) lx |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/37 | ||
| 10 | Technical equipment, its components and safety devices, protective automation and control systems | Electrical energy single-phase current for devices with power from 10 W do 12 kW three-phase current for devices with power from 10 W do 20 kW |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/54 | ||
| 11 | Technical equipment, its components and safety devices, protective automation and control systems | Electrical power direct current from 1 W do 8 kW alternating current from 1 W do 1,5 MW |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/54 | ||
| 12 | Technical equipment, steel and building structures, their components and safety devices, for which the issue of stability is essential | Stability of the object. Measurement of pressure distribution for the support point (0 - 500) kN (0 - 15) Mg |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/43 wyd. 2 z dnia 14.05.2020 | ||
| 13 | Well segments, landing doors and lift cars | Strength static impact |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 81-50:2020-08 p. 5.14 | ||
| 14 | Displacement integrated air compressors with electric drive | Performance parameters output pressure electrical power consumption engine rotational speed power do 65 kW, pressure do 1,5 MPa speed up to 50 000 rpm |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN ISO 1217:1999 z załącznikiem C | ||
| 15 | Metal pipes | Technological properties of pipes: bend test flattening test drift-expanding test ring-expanding test ring tensile test |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 8491:2005 | PN-EN ISO 8492:2014-02 | PN-EN ISO 8493:2005 | PN-EN ISO 8495:2014-02 | PN-EN ISO 8496:2014-02 | ||
| 16 | Metal products and welded joints | Ability to undergo plastic deformation and/or presence of welding imperfections on or near the surface of the joint during the bend test | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 7438:2021-04 | PN-EN ISO 5173:2010 | PN-EN ISO 5173:2023-06 | ||
| 17 | Metals and welded joints | Mechanical properties: distinct yield strength Re proof strength, plastic extension Rp tensile strength Rm tensile stress elongation A reduction of area Z force F do 400 kN Static tensile test at room temperature |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 6892-1:2020-05 metoda B | PN-EN ISO 4136:2022-12 | PN-EN ISO 5178:2019-04 | PN-EN ISO 9018:2016-01 | ASTM A370-24a | ASTM E8/E8M-24 | ||
| 18 | Metals and metal alloys | Mechanical properties: distinct yield strength Re proof strength, plastic extension Rp tensile strength Rm tensile stress elongation A reduction of area Z force F do 100 kN temperature up to + 1100 °C Static tensile test at elevated temperature |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 6892-2:2018-08 | ||
| 19 | Metals, welded joints, weld metal | Impact energy Range KV2, KU2, KV8, KU8 Initial hammer energy do 450 J Test temperature: ambient 23 ± 5 °C reduced to – 80 °C elevated to +180 °C reduced at temp. – 196 oC Charpy impact test |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 148-1:2017-02 | PN-EN ISO 9016:2022-09 | ASTM A370-24a | ASTM E23-24 | ||
| 20 | Technical equipment, steel and building structures, their components, safety devices, materials for their manufacture, permanent joints | Hardness of metals by the methods: Brinell - with loads do 2452 N Rockwell - in scales: A, B, C, Vickers - from HV1 to HV10 hardness measurement by non-standardised methods |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 6506-1:2014-12 | PN-EN ISO 6507-1:2024-04 | PN-EN ISO 6508-1:2024-06 | PN-EN ISO 9015-1:2011 | PN-EN ISO 14271:2017-11 LW-1/IN/101 wyd.2.00 z dnia 09.06.2023 | ||
| 21 | Rolled steel products (steel products and casting alloys), welded joints | Microstructure and fracture features, Scanning electron microscopy | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/103 Wydanie 4.00 z dnia 12.06.2024 | ||
| 22 | Permanent joints in thermoplastics | Properties of permanent joints made of thermoplastics: bending test, tensile test, peel test, visual assessment of joints, macroscopic examination Load range (0,02 – 400) kN |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 12814-1:2002 | PN-EN 12814-2:2021-06 | EN 12814-2:2000 | PN-EN 12814-4:2018-05 | PN-EN 12814-5:2002 | PN-EN 12814-7:2024-09 | PN-EN 13100-1:2017-07 | ||
| 23 | Plastics, plastic composites | Strength properties:: yield strength stress at break tensile strength percentage elongation at yield percentage elongation at fracture modulus of elasticity Load range (0,02 – 400) kN |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 527-1:2020-01 | PN-EN ISO 527-2:2012 | PN-EN ISO 527-3:2019-01 | PN-EN ISO 527-4:2023-10 | PN-EN ISO 527-5:2022-06 | ||
| 24 | Plastics | Strength properties: bending strength deflection deflection in bending deflection corresponding to flexural strength bending deformation modulus of elasticity Load range (0,02 – 400) kN |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 14125:2001 | PN-EN ISO 178:2019-06 | ||
| 25 | Weld metals and clad layers of austenitic stainless steels and duplex steels and austenitic steels | Delta ferrite content | Magnetic induction method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 8249:2018-11 | |
| 26 | Technical equipment and its components and safety devices | Strength and tightness by the pressure test method Range (0 - 45) MPa Range (0 - 45) MPa |
Hydraulic method; Pneumatic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/87 Wydanie 3.00 z dnia 21.06.2024 | |
| 27 | Solid fuel heating boilers with nominal output up to 500 kW, with manual or automatic fuel feeding. | Structural and thermal-technical testing of heating boilers: safety in use, electrical safety and electromagnetic compatibility: pressure (0 - 15) bar mass (0 - 3 000) kg temperature (0 - 450) oC time (0 - 12) godz. content of harmful substances in flue gases when burning solid fuels: oxygen O2 (0 - 21) % paramagnetic method carbon monoxide CO (0 - 100 000) ppm NDIR method carbon dioxide CO2 (0 - 20) % NDIR method nitrogen oxides NO, NO2, (NOX) range (0 - 4 000) ppm chemiluminescence method excess combustion air ratio λ (calculated) dust range (0 - 200) mg/m3 gravimetric method unburnt gaseous organic substances – bound organic carbon range (0 - 2 000) ppm continuous flame ionisation detection method heat output / efficiency (calculated) |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | EN 303-5:2021 | PN-EN 303-5:2021-09 | PN-EN 303-5+A 1:2023-05 | ||
| 28 | Technical equipment, its components, safety devices, protective automation and control systems | and Pressure difference Range (0 - 0,25) MPa measurement using a differential pressure transducer |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/83 wyd.4.00 z dnia 09.06.2023 | ||
| 29 | Technical equipment, its components, safety devices, protective automation and control systems | Mass flow rate of vapours, gases and liquids Range do 8200 kg/h dla par i gazów by means of differential pressure devices Range do 61100 kg/h cieczy za using measuring orifices Range up to 9000 l/h of water using an electromagnetic flowmeter |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/84 wyd.4.00 z dnia 27.08.2025 | PN-EN ISO 5167-1:2022-12 | PN-EN ISO 5167-2:2022-12 | ||
| 30 | Equipment enclosures | Mechanical strength, Degree: IK10, Test Ehc | PN-EN 62262:2003 * | PN-EN 60068-2-75:2015-01 | ||
| 31 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints, protective automation and control systems | Mass Range 1 g - 500 Mg |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/33 | ||
| 32 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints, protective automation and control systems | Temperature of gaseous and liquid media Range (-200 - +850) °C |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/34 | ||
| 33 | Technical equipment, its components, safety devices, protective automation and control systems | Pressure Range (0 – 100) MPa |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/32 | ||
| 34 | Technical equipment, its components, safety devices, protective automation and control systems | Speed by means of a tachometer Range (0,05 - 1 999,9) m/min |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/41 | ||
| 35 | Technical equipment, its components, safety devices, protective automation and control systems | Effectiveness and functionality of the operation of protective automation and control systems with respect to the specified operating algorithms of the technical device, Qualitative testing | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/51 wyd.2.00 z dnia 09.06.2023 | ||
| 36 | Technical equipment, its components, safety devices, protective automation and control systems | Fault loop impedance Range od 0,01 Ω do 20 Ω |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/56 | ||
| 37 | Technical equipment, its components, safety devices, protective automation and control systems | Electrical voltage direct voltage from 1 mV do 1000 V alternating voltage from 1 mV to Range 5000 V |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/53 | ||
| 38 | Technical equipment, its components safety devices | and Rotational speed Range (10 - 50 000) obr/min |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/41 | ||
| 39 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Time Range (0 - 30) min or its multiple |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/36 | ||
| 40 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Force Range (0 - 3 000) kN |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/40 | ||
| 41 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Accelerations and decelerations Range (0 - 200) m/s2 |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/45 | ||
| 42 | Safety locks for landing doors and lift shaft doors | Strength and functionality of the safety lock | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 81-50:2020-08 p. 5.2 | ||
| 43 | Lift overspeed governors | Features of overspeed governors: speed; range (0 – 6) m/s friction coupling, range (0 – 5) kN functionality |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 81-50:2020-08 p. 5.4 | ||
| 44 | Instantaneous safety gears for lifts | Features of instantaneous safety gears: energy absorption capacity maximum permissible gross weight Based on force and displacement measurements |
PN-EN 81-50:2020-08 p. 5.3.2 * | ||
| 45 | Technical equipment, steel and building structures, their components and safety devices, building structures – noise | Sound pressure level weighted with the characteristic frequency weighting A Range (24-139) dB |
Technical method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3744 :1999 | PN-EN ISO 3744 :2011 Załącznik nr 4 do Rozporządzenia Ministra Gospodarki z dnia 21 grudnia 2005 (Dz.U. 263 poz. 2202) | |
| 46 | Technical equipment, steel and building structures, their components and safety devices, building structures – noise | Sound power level (calculated) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3744 :1999 | PN-EN ISO 3744 :2011 Załącznik nr 4 do Rozporządzenia Ministra Gospodarki z dnia 21 grudnia 2005 (Dz.U. 263 poz. 2202) | ||
| 47 | Technical equipment, steel and building structures, their components and safety devices, building structures – noise | Sound pressure level weighted with the characteristic frequency weighting A Range (24 – 139) dB |
Indicative method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3746:2011 | PN-EN ISO 3746:2011/Ap1:2017-09 | PN-EN ISO 3746:1999 Załącznik nr 4 do Rozporządzenia Ministra Gospodarki z dnia 21 grudnia 2005 (Dz.U. 263 poz. 2202) | |
| 48 | Technical equipment, steel and building structures, their components and safety devices, building structures – noise | Sound power level (calculated) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3746:2011 | PN-EN ISO 3746:2011/Ap1:2017-09 | PN-EN ISO 3746:1999 Załącznik nr 4 do Rozporządzenia Ministra Gospodarki z dnia 21 grudnia 2005 (Dz.U. 263 poz. 2202) | ||
| 49 | Technical equipment, steel and building structures, their components and safety devices, building structures – noise | Sound pressure level weighted with the characteristic frequency weighting A Range (24 - 139) dB C-weighted peak sound pressure level Range (24 - 139) dB Emission sound pressure level (calculated) |
Direct measurement method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 11201:2012 | |
| 50 | Rooms in residential, collective residence and public utility buildings - noise | A-weighted equivalent sound level Maximum A-weighted sound level Range (24 – 139) dB |
Direct measurement method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-87/B-02156 | |
| 51 | Rooms in residential, collective residence and public utility buildings - noise | A-weighted equivalent sound level for reference time T (calculated) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-87/B-02156 | ||
| 52 | Rooms in residential, collective residence and public utility buildings - noise | A-weighted equivalent sound level Maximum A-weighted sound level Range (24 – 139) dB |
Direct measurement method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 10052:2021-12 | |
| 53 | Rooms in residential, collective residence and public utility buildings - noise | Reference A-weighted equivalent sound level for the work cycle, Reference A-weighted maximum sound level for the work cycle (calculated) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 10052:2021-12 | ||
| 54 | Equipment enclosures | IP degree of protection provided by the enclosure IP0X to IP6X – for the first characteristic numeral IPX3, IPX4 and IPX7 – for the second characteristic numeral |
PN-EN 60529:2003/A2:2014-07 * | ||
| 55 | Technical equipment, its components and safety devices, protective automation and control systems | Content of harmful substances in flue gases from combustion of solid, liquid and gaseous fuels: oxygen O2 Range (0 - 21) % carbon monoxide CO Range (0 - 100000) ppm carbon dioxide CO2 Range (0 - 20) % nitrogen oxides: NO, NO2 (NOX) Range (0 - 4000) ppm excess combustion air ratio λ (calculated value) exhaust gas blackness Range (0 - 10) oB dust Range (0,001 - 100) g/m3 unburnt gaseous organic substances – bound organic carbon Range (0 - 2000) ppm |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/63 wyd. 2.00 z dnia 09.06.2023 | ||
| 56 | Heating appliances | Energy efficiency in terms of efficiency for appliances with an output up to 1200 kW | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/86 wyd. 2.00 z dnia 09.06.2023 | ||
| 57 | Solid fuel fired appliances: - heating boilers with a nominal output up to 50 kW, - cookers, - room heaters, - inset appliances including open fires | Structural and thermal-technical testing of appliances: safety in use and electrical safety: pressure (0 - 15) bar mass (0 - 3 000) kg temperature (0 - 450) oC time (0 - 12) godz. content of harmful substances in flue gases when burning solid fuels: ● oxygen O2 (0 - 21) % ● carbon monoxide CO (0 - 100 000) ppm ● carbon dioxide CO2 (0 - 20) % ● nitrogen oxides NO, NO2, (NOX) (0 - 4 000) ppm ● excess combustion air ratio λ (calculated value) ● dust (0 - 200) mg/m3 ● unburnt gaseous organic substances – bound organic carbon (0 - 2 000) ppm heat output/efficiency Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 12809:2002 „N“ | PN-EN 12815:2004 „N“ | PN-EN 13240:2008 „N“ | PN-EN 13229:2002 „N“ | ||
| 58 | Deposits from technical equipment | Content of sediment components in the range: CaO (1,0 – 62) % MgO (0,4 – 26) % Al2O3 (1,0 – 38) % Fe2O3 (1,0 – 100) % CuO (0,7 – 37) % SiO2 (0,2 – 64) % carbonates as CO2 (0,2 – 50) % sulfates as SO3 (0,3 – 54) % matter insoluble in HCl (1+1) (0,2 – 96) % loss on ignition at 800 °C (0,2 – 100) % P2O5 (0,02 – 50) % |
Gravimetric method; Spectrophotometric method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/81 wyd.2 z dnia 12.09.2022 | |
| 59 | Technical equipment, its components, safety devices, protective automation and control systems | and Spring stiffness by measuring force in the range up to 2000 N and deflection in the range up to 500 mm | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/82 Wydanie 2.00 z dnia 09.06.2023 | ||
| 60 | Welded joints | Weld imperfections, their size and distribution on the internal fracture surface of the welded joint, Fracture test | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9017:2018-03 | ||
| 61 | Technical equipment, steel and building structures, their components, safety devices, materials for their manufacture, permanent joints | Hardness of plastics and glass fibre reinforced plastic composites | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 2039-1:2004 | PN-EN 59:2016-03 | ||
| 62 | Welded joints in metallic materials | Welding imperfections | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 17640:2019-01 | PN-EN 1714:2002 | |
| 63 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 16823:2014-06 | PN-EN ISO 16826:2014-06 | PN-EN ISO 16827:2014-06 | |
| 64 | Flat steel products | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10160:2001 | |
| 65 | Steel forgings | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10228-3:2016-07 | PN-EN 10228-4:2016-07 | |
| 66 | Welded joints in austenitic steels and nickel-based alloys | Internal welding imperfections | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 22825:2017-12 | |
| 67 | Metallic and non-metallic products and materials | Thicknesses in the equivalent range for steel (0,6 - 300) mm |
Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 14127:2011 | PN-EN ISO 16809:2019-08 | |
| 68 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints | Discontinuities of welded joints from 6 mm thick. Internal discontinuities of steel products from 6 mm to 400 mm thick., Discontinuities of PE welded joints from 6 mm thick. | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16828:2014-06 | PN-EN ISO 10863:2020-12 | PN-EN 13100-3:2006 | |
| 69 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints | Discontinuities of welded joints from 6 mm thick. Internal discontinuities of steel products from 8 mm to 200 mm thick. | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 13588:2019-04 | |
| 70 | Metal products and materials | Crack depth, Range up to 50 mm, for carbon and alloy steels, Range up to 10 mm for austenitic steels | Potential drop method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/90 Wydanie 2.00 z dnia 09.06.2023 | |
| 71 | Metallic and non-metallic products and materials, welded joints | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | |
| 72 | Castings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 1371-2:2015-03 | PN-EN 1371-1:2012 | |
| 73 | Forgings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 10228-2:2016-07 | |
| 74 | Steel pipes | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN ISO 10893-4:2011 | |
| 75 | Ferromagnetic metal products and materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | |
| 76 | Castings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 1369:2013-04 | |
| 77 | Forgings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 10228-1:2016-07 | |
| 78 | Ferromagnetic steel pipes | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN ISO 10893-5:2011 | |
| 79 | Welded joints in ferromagnetic materials | Surface and subsurface welding imperfections | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN EN ISO 17638:2017-01 | |
| 80 | Technical equipment and its components, rolled steel products | Shape imperfection and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 13018:2016-04 | |
| 81 | Welded joints in metallic materials | Welding imperfections and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17637:2017-02 | |
| 82 | Rolled steel products (steel products and casting alloys), welded joints | Macrostructure, Optical microscopy | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17639:2022-07 | PN-ISO 3057:2000 LW-1/IN/103 Wydanie 4.00 z dnia 12.06.2024 | ||
| 83 | Rolled steel products (steel products and casting alloys), welded joints | Microstructure, Optical microscopy | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-63/H-04504 | PN-66/H-04505 | PN-ISO 3057:2000 | PN-EN ISO 945-1:2019-09 | PN-75/H-04661 LW-1/IN/103 Wydanie 4.00 z dnia 12.06.2024 | ||
| 84 | Steels | Content of nonmetallic inclusions, Optical microscopy | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-64/H-04510 | ||
| 85 | Metals and metal alloys | Grain size, Optical microscopy | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-H-04507-01:1984 | PN-H-04507-01:1984/Az1:1998 | PN-EN ISO 2624:1997 | PN-EN ISO 643:2025-02 | ||
| 86 | Technical equipment and its components, steel products and welded joints | Shape imperfection and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17637:2017-02 | PN-EN 13018:2016-04 | |
| 87 | Carbon and low-alloy steels | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 88 | Carbon and low-alloy steels | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 89 | Carbon and low-alloy steels | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Molybdenum, Nickel, Aluminium, Arsenic, Boron, Cobalt, Copper, Niobium, Tin, Titanium, Vanadium, Tungsten, Nitrogen, C, Si, Mn, P, S, Cr, Mo, Ni, Al, As, B, Co, Cu, Nb, Sn, Ti, V, W, N 0,005 - 1,40 0,005 - 1,50 0,001 - 2,40 0,001 - 0,10 0,001 - 0,10 0,01 - 5,0 0,005 - 1,40 0,01 - 5,50 0,001 - 1,0 0,001 - 0,10 0,0001 - 0,01 0,005 - 0,80 0,001 - 0,70 0,001 - 0,30 0,001 - 0,15 0,001 - 0,35 0,001 - 0,80 0,01 - 3,00 0,001 - 0,11 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 90 | Cast irons | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 91 | Cast irons | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 92 | Cast irons | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Molybdenum, Nickel, Aluminium, Arsenic, Boron, Cobalt, Copper, Niobium, Tin, Titanium, Vanadium, Tungsten, C, Si, Mn, P, S, Cr, Mo, Ni, Al, As, B, Co, Cu, Nb, Sn, Ti, V, W 1,00 - 4,00 0,10 - 4,80 0,001 - 1,50 0,001 - 1,10 0,001 - 0,20 0,01 - 1,50 0,005 - 1,50 0,01 - 1,80 0,001 - 0,10 0,001 - 0,10 0,0001 - 0,10 0,005 - 0,10 0,001 - 1,40 0,001 - 0,10 0,001 - 0,20 0,001 - 0,30 0,001 - 0,50 0,005 - 0,05 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 93 | Stainless steels | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 94 | Stainless steels | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 95 | Stainless steels | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Molybdenum, Nickel, Aluminium, Boron, Cobalt, Copper, Niobium, Titanium, Vanadium, Tungsten, Nitrogen, C, Si, Mn, P, S, Cr, Mo, Ni, Al, B, Co, Cu, Nb, Ti, V, W, N 0,005 - 1,50 0,005 - 2,00 0,001 - 9,00 0,001 - 0,10 0,001 - 0,10 0,01 - 27,00 0,005 - 3,20 0,01 - 40,00 0,001 - 2,60 0,0001 - 1,10 0,005 - 0,60 0,001 - 7,10 0,001 - 2,60 0,001 - 2,25 0,001 - 0,60 0,005 - 0,10 0,001 - 0,80 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 96 | Tool steels | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 97 | Tool steels | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 98 | Tool steels | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Molybdenum, Nickel, Cobalt, Copper, Vanadium, Tungsten, C, Si, Mn, P, S, Cr, Mo, Ni, Co, Cu, V, W 0,10 - 2,40 0,10 - 1,00 0,01 - 2,00 0,001 - 0,05 0,001 - 0,05 0,10 - 5,50 0,005 - 9,50 0,01 - 0,20 0,005 - 8,00 0,001 - 0,10 0,005 - 9,50 0,010 - 18 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 99 | Manganese steels | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 100 | Manganese steels | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 101 | Manganese steels | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Molybdenum, Nickel, Aluminium, Copper, Vanadium, C, Si, Mn, P, S, Cr, Mo, Ni, Al, Cu, V 0,50 - 1,40 0,01 - 1,20 9,00 - 17,00 0,001 - 0,10 0,001 - 0,05 0,01 - 2,10 0,005 - 1,30 0,01 - 4,00 0,001 - 0,20 0,001 - 0,25 0,001 - 0,10 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 102 | Alloy cast irons | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 103 | Alloy cast irons | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 104 | Alloy cast irons | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Molybdenum, Nickel, Copper, Niobium, Nitrogen, C, Si, Mn, P, S, Cr, Mo, Ni, Cu, Nb, N 1,00 - 3,80 0,10 - 5,50 0,005 - 4,00 0,001 - 0,30 0,001 - 0,20 1,00 - 30,30 0,10 - 3,20 0,01 - 35,50 0,001 - 6,00 0,005 - 0,40 0,001 - 0,05 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 105 | Low-alloy nickel | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 106 | Low-alloy nickel | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 107 | Low-alloy nickel | Carbon, Silicon, Manganese, Chromium, Iron, Molybdenum, Titanium, Copper, Aluminium, Cobalt, Magnesium, C, Si, Mn, Cr, Fe, Mo, Ti, Cu, Al, Co, Mg 0,005 - 1,24 0,005 - 0,50 0,005 - 3,00 0,001 - 0,50 0,005 - 0,70 0,005 - 0,12 0,001 - 0,50 0,001 - 0,50 0,001 - 0,50 0,001 - 1,10 0,001 - 0,30 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 108 | Monel | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 109 | Monel | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 110 | Monel | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Iron, Titanium, Copper, Aluminium, Cobalt, Magnesium, C, Si, Mn, P, S, Cr, Fe, Ti, Cu, Al, Co, Mg 0,005 - 0,15 0,01 - 4,70 0,10 - 3,00 0,001 - 0,90 0,001 - 0,20 0,01 - 0,52 0,10 - 3,50 0,01 - 1,40 20,00 - 42,00 0,01 - 4,00 0,01 - 0,12 0,001 - 0,15 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 111 | Nimonic | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 112 | Nimonic | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 113 | Nimonic | Carbon, Silicon, Manganese, Chromium, Iron, Molybdenum, Titanium, Copper, Aluminium, Cobalt, C, Si, Mn, Cr, Fe, Mo, Ti, Cu, Al, Co 0,005 - 0,30 0,01 - 1,10 0,005 - 0,60 10,00 - 20,00 0,10 - 1,50 3,50 - 6,00 0,40 - 3,50 0,005 - 0,25 0,10 - 6,00 14,50 - 20,50 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 114 | Inconel | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 115 | Inconel | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 116 | Inconel | Carbon, Silicon, Manganese, Phosphorus, Chromium, Iron, Molybdenum, Titanium, Copper, Niobium, Aluminium, Cobalt, C, Si, Mn, P, Cr, Fe, Mo, Ti, Cu, Nb, Al, Co 0,005 - 0,05 0,01 - 0,60 0,01 - 1,60 0,001 - 0,04 14,50 - 25,50 3,00 - 27,00 0,005 - 8,00 0,01 - 2,60 0,005 - 1,80 0,01 - 5,50 0,001 - 0,80 0,01 - 3,10 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 117 | Hastelloy | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 118 | Hastelloy | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 119 | Hastelloy | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Iron, Molybdenum, Vanadium, Tungsten, Copper, Cobalt, C, Si, Mn, P, S, Cr, Fe, Mo, V, W, Cu, Co 0,005 - 0,15 0,01 - 1,30 0,005 - 1,25 0,001 - 0,05 0,001 - 0,05 5,00 - 22,50 0,50 - 20,00 8,00 - 34,00 0,005 - 0,70 0,01 - 5,00 0,01 - 0,30 0,01 - 2,50 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 120 | Incoloy | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 121 | Incoloy | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 122 | Incoloy | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Iron, Titanium, Copper, C, Si, Mn, P, S, Cr, Fe, Ti, Cu 0,005 - 0,20 0,01 - 0,75 0,005 - 1,50 0,001 - 0,05 0,001 - 0,03 10,80 - 25,50 23,00 - 52,00 0,01 - 0,90 0,001 - 2,00 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 123 | Pure copper | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 124 | Pure copper | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 125 | Pure copper | Tin, Lead, Zinc, Phosphorus, Manganese, Iron, Nickel, Silicon, Chromium, Arsenic, Silver, Cobalt, Sn, Pb, Zn, P, Mn, Fe, Ni, Si, Cr, As, Ag, Co 0,0001 - 0,05 0,0005 - 0,07 0,0001 - 0,02 0,001 - 0,05 0,0001 - 0,01 0,001 - 0,07 0,0001 - 0,01 0,0001 - 0,02 0,001 - 0,60 0,001 - 0,03 0,0001 - 0,03 0,0001 - 0,03 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 126 | Brass | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 127 | Brass | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 128 | Brass | Tin, Lead, Zinc, Phosphorus, Manganese, Iron, Nickel, Silicon, Chromium, Arsenic, Antimony, Bismuth, Cobalt, Aluminium, Sulfur, Sn, Pb, Zn, P, Mn, Fe, Ni, Si, Cr, As, Sb, Bi, Co, Al, S 0,005 - 2,30 0,001 - 3,00 1,00 - 43,40 0,001 - 0,25 0,01 - 5,30 0,01 - 4,60 0,01 - 3,00 0,01 - 7,10 0,001 - 0,12 0,002 - 0,22 0,002 - 0,40 0,010 - 4,10 0,005 - 0,45 0,001 - 8,00 0,001 - 0,05 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 129 | Cupronickel | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 130 | Cupronickel | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 131 | Cupronickel | Tin, Lead, Zinc, Phosphorus, Manganese, Iron, Nickel, Silicon, Chromium, Cobalt, Sulfur, Sn, Pb, Zn, P, Mn, Fe, Ni, Si, Cr, Co, S 0,001 - 0,06 0,001 - 0,05 0,001 - 0,80 0,001 - 0,03 0,005 - 2,30 0,01 - 2,40 8,00 - 32,10 0,001 - 0,65 0,001 - 2,15 0,005 - 0,35 0,001 - 0,05 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 132 | Bronze | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 133 | Bronze | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 134 | Bronze | Tin, Lead, Zinc, Phosphorus, Manganese, Iron, Nickel, Silicon, Antimony, Aluminium, Sulfur, Sn, Pb, Zn, P, Mn, Fe, Ni, Si, Sb, Al, S 1,00 - 19,75 0,01 - 20,10 0,01 - 1,00 0,001 - 0,70 0,001 - 0,15 0,001 - 0,15 0,01 - 1,50 0,001 - 0,20 0,002 - 0,50 0,001 - 0,10 0,001 - 0,05 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 135 | Cu-Be-Co alloys | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 136 | Cu-Be-Co alloys | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 137 | Cu-Be-Co alloys | Tin, Zinc, Manganese, Iron, Nickel, Silicon, Chromium, Cobalt, Aluminium, Beryllium, Sn, Zn, Mn, Fe, Ni, Si, Cr, Co, Al, Be 0,001 - 0,10 0,005 - 0,15 0,001 - 0,06 0,001 - 0,20 0,01 - 1,10 0,001 - 0,20 0,001 - 0,20 0,01 - 2,15 0,001 - 0,10 0,1 - 2,55 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 138 | Low-alloy aluminium | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 139 | Low-alloy aluminium | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 140 | Low-alloy aluminium | Silicon, Iron, Copper, Manganese, Magnesium, Zinc, Titanium, Chromium, Nickel, Si, Fe, Cu, Mn, Mg, Zn, Ti, Cr, Ni 0,001 - 1,80 0,001 - 0,60 0,001 - 0,25 0,001 - 1,00 0,001 - 1,50 0,001 - 0,30 0,001 - 0,15 0,001 - 0,20 0,001 - 0,30 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 141 | Al-Si | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 142 | Al-Si | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 143 | Al-Si | Silicon, Iron, Copper, Manganese, Magnesium, Zinc, Titanium, Chromium, Nickel, Lead, Tin, Si, Fe, Cu, Mn, Mg, Zn, Ti, Cr, Ni, Pb, Sn 5,50 - 20,00 0,001 - 1,00 0,001 - 4,60 0,001 - 0,55 0,001 - 1,40 0,001 - 2,00 0,001 - 0,15 0,001 - 0,25 0,001 - 4,00 0,001 - 0,20 0,001 - 0,30 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 144 | Al-Zn | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 145 | Al-Zn | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 146 | Al-Zn | Silicon, Iron, Copper, Manganese, Magnesium, Zinc, Titanium, Chromium, Nickel, Zirconium, Si, Fe, Cu, Mn, Mg, Zn, Ti, Cr, Ni, Zr 0,001 - 0,50 0,001 - 0,60 0,001 - 2,60 0,001 - 0,35 0,001 - 4,50 1,00 - 11,60 0,001 - 0,20 0,001 - 0,35 0,001 - 0,05 0,001 - 0,30 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 147 | Al-Mn | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 148 | Al-Mn | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 149 | Al-Mn | Silicon, Iron, Copper, Manganese, Magnesium, Zinc, Titanium, Chromium, Zirconium, Si, Fe, Cu, Mn, Mg, Zn, Ti, Cr, Zr 0,001 - 0,75 0,001 - 1,00 0,001 - 0,70 1,00 - 12,00 0,001 - 1,10 0,001 - 0,25 0,001 - 0,45 0,001 - 0,15 0,001 - 0,20 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 150 | Titanium and titanium alloys | Element, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 151 | Titanium and titanium alloys | Name, Symbol | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | ||
| 152 | Titanium and titanium alloys | Aluminium, Iron, Vanadium, Molybdenum, Zirconium, Tin, Chromium, Manganese, Nickel, Silicon, Al, Fe, V, Mo, Zr, Sn, Cr, Mn, Ni, Si 0,01 - 8,00 0,005 - 2,00 0,005 - 4,20 0,01 - 15,40 0,01 - 5,25 0,01 - 11,10 0,01 - 2,00 1,00 - 5,00 0,001 - 0,07 0,01 - 0,70 | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/105 wyd.3.00 z dnia 23.06.2025 | |
| 153 | Non-porous plastics | Density of non-cellular plastics | Immersion method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 1183-1:2019-05 (metoda A) | |
| 154 | Glass fibre reinforced plastics | Glass fibre content in glass fibre reinforced plastics | Gravimetric method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 1172:2024-03 metoda A | |
| 155 | Technical equipment, steel, engineering and fibre-reinforced composite structures, their components and safety devices, materials for their manufacture, joints | Detection, location, monitoring and classification of AE signal sources generated by surface and internal defects (damage) in the walls, welds and components of the tested device (object) subjected to loading during the test. Revealing defects and damage active during loading, such as: cracks and their growth and other discontinuities in the material structure, local plastic deformation, leakage and lack of tightness, material degradation due to corrosion causing local weakening of the structure of the equipment material. Detection, location, monitoring and classification of AE signal sources generated by active processes caused by general or local corrosion or generated by leakage (leak). Monitoring of the condition of equipment and structures under operating conditions. |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 13554:2011 | PN-EN 14584:2013-07 | PN-EN ISO 16148:2016-08/A1:2020-11 | PN-EN 15856:2010 | PN-EN 15857:2010 | PN-EN ISO 18081:2025-01 ASME BPVC.V-2021 Article 12. | ASTM E1139/E1139M-17 | ISO 19835:2018 | ISO 4310:2009 | ||
| 156 | Products made of metallic materials with equivalent thickness up to 30 mm Fe | Internal discontinuities | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 5579:2014-02 | PN-EN 444:1998 | |
| 157 | Castings with equivalent thickness up to 30 mm Fe | Material discontinuities | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 5579:2014-02 | PN-EN 444:1998 | PN-EN 12681:2018-01 | |
| 158 | Welded joints with equivalent thickness up to 30 mm Fe | Welding imperfections | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17636-1:2023-02 | PN-EN 1435:2001 | |
| 159 | Welded steel pipes with equivalent thickness up to 30 mm Fe | Welding discontinuities | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 5579:2014-02 | PN-EN 444:1998 | PN-EN ISO 10893-6:2011 | |
| 160 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints. | Discontinuities in steel products, castings and welded metal joints up to 30 mm thick and in plastics, detected using X-ray radiation. | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17636-2:2023-04 | PN-EN 12681-2:2017-12 | ||
| 161 | Metals and metal alloys | Hardness | UCI method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | DIN 50159-1:2022-06 | ASTM A1038-19 | |
| 162 | Equipment fitted with electrical and electronic accessories | Immunity to electrical fast transients/bursts | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 61000-4-4:2013-05 | EN 61000-4-4:2012 | ||
| 163 | Equipment fitted with electrical and electronic accessories | Immunity to electrical surges | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 61000-4-5:2014-10 | PN-EN 61000-4-5:2014-10/A1:2018-01 | EN 61000-4-5:2014 | EN 61000-4-5:2014/A1 :2017 | ||
| 164 | Equipment fitted with electrical and electronic accessories | Measurement of radiated disturbance emission in the frequency range 30 MHz – 6 GHz (SAC-3 chamber) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 55011:2016-05 | PN-EN 55011:2016-05/ A1:2017-06 | PN-EN 55011:2016-05/ A2:2021-08 | PN-EN 55011:2016-05/A11:2020-07 | EN 55011:2016 | EN 55011:2016/A1:2017 | EN 55011:2016/A11:2020 | EN 55011:2016/A2:2021 | PN-EN IEC 55014-1:2021-08 | EN IEC 55014-1:2021 | PN-EN 55016-2-3:2017 | PN-EN 55016-2-3:2017-06/A1:2020-01 | PN-EN 55016-2-3:2017-06/A2:2024-03 | EN 55016-2-3:2017 | EN 55016-2-3:2017/A1:2019 | EN 55016-2-3:2017/A2:2023 | PN-EN 55032:2015-09 | PN-EN 55032:2015-09/ A1:2021-05 | PN-EN 55032:2015-09/ A11:2020-07 | EN 55032:2015 | EN 55032:2015/A1:2020 | EN 55032:2015/A11:2020 | ||
| 165 | Equipment fitted with electrical and electronic accessories | Level of current harmonic emissions | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN IEC 61000-3-2:2019-04 | PN-EN IEC 61000-3-2:2019-04/A1:2021-08 | PN-EN IEC 61000-3-2:2019-04/A2:2024-12 | EN IEC 61000-3-2:2019 | EN IEC 61000-3-2:2019/A1:2021 | EN IEC 61000-3-2:2019/A2:2024 | ||
| 166 | Equipment fitted with electrical and electronic accessories | Determination of the voltage fluctuation and flicker factors | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 61000-3-3:2013-10 | PN-EN 61000-3-3:2013-10/ A1:2019-10 | PN-EN 61000-3-3:2013-10/ A2:2022-04 | EN 61000-3-3:2013 | EN 61000-3-3:2013/A1:2019 | EN 61000-3-3:2013/A2:2021 | ||
| LABORATORY TESTING DEPARTMENT (OL) IN WARSAW | |||||
| 167 | Metals and welded joints | Mechanical properties: distinct yield strength Re proof strength, plastic extension Rp tensile strength Rm tensile stresses elongation A reduction of area Z force F do 600 kN Tensile test at room temperature |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 6892-1:2020-05 metoda B | PN-EN ISO 4136:2022-12 | PN-EN ISO 5178:2019-04 | PN-EN ISO 9018:2016-01 | ASTM A370-24a | ASTM E8/E8M-24 | ||
| 168 | Metals and metal alloys | Mechanical properties: distinct yield strength Re proof strength, plastic extension Rp tensile strength Rm tensile stresses elongation A reduction of area Z force F do 150 kN temperature + 900 oC Tensile test at elevated temperature |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 6892-2:2018-08 metoda A | ||
| 169 | Metals and welded joints, weld metal | Impact energy Range KV2, KU2, KV8, KU8 Initial hammer energy do 450 J Test temperature: ambient 23 ± 5 °C reduced to – 70 °C elevated to +180 °C reduced at temp. – 196 oC Charpy impact test |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 148-1:2017-02 | PN-EN ISO 9016:2022-09 | ASTM A370-24a | ASTM E23-24 | ||
| 170 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints. | Hardness HBW 2,5/62,5, HBW 2,5/187,5, HBW 5/250 Rockwell – in scales : A, B, C Vickers HV1, HV5, HV10 |
Method: - Brinell | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 6506-1:2014-12 | PN-EN ISO 6507-1:2024-04 | PN-EN ISO 6508-1:2024-06 | PN-EN ISO 9015-1:2011 | PN-EN ISO 14271:2017-11 | |
| 171 | Rolled steel products (steel products and casting alloys), welded joints | Macrostructure | Method: optical microscopy | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17639 :2022-07 LW-1/IN/103 Wydanie 4.00 z dnia 12.06.2024 | |
| 172 | Rolled steel products (steel products and casting alloys), welded joints | Metallographic examination using the replica technique | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-ISO 3057:2000 LW-1/IN/103 Wydanie 4.00 z dnia 12.06.2024 | ||
| 173 | Welded joints | Weld imperfections, their size and distribution on the internal fracture surface | Method: breaking test | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9017:2018-03 | |
| 174 | Metal products and welded joints | Ability to undergo plastic deformation and/or presence of welding imperfections on or near the surface of the joint during the bend test | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 7438:2021-04 | PN-EN ISO 5173:2023-06 | ||
| 175 | Welded joints in metallic materials | Welding imperfections | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 17640:2019-01 | PN-EN 1714:2002 | |
| 176 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 16823:2014-06 | PN-EN ISO 16826:2014-06 | PN-EN ISO 16827:2014-06 | |
| 177 | Flat steel products | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10160:2001 | |
| 178 | Steel forgings | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10228-3:2016-07 | PN-EN 10228-4:2016-07 | |
| 179 | Welded joints in austenitic steels and nickel-based alloys | Internal welding imperfections | Ultrasonic method | PN-EN ISO 16810:2025-04 | PN-EN ISO 22825:2017-12 | |
| 180 | Metallic and non-metallic products and materials | Thicknesses in the range equivalent to steel (0,6 - 300) mm |
Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16809:2019-08 | |
| 181 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints | Discontinuities of welded joints from 6 mm thick. Internal discontinuities of steel products from 6 mm to 400 mm thick., Discontinuities of PE welded joints from 6 mm thick. | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16828:2014-06 | PN-EN ISO 10863:2020-12 | |
| 182 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints | Discontinuities of welded joints from 6 mm thick. Internal discontinuities of steel products from 8 mm to 200 mm thick. | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 13588:2019-04 | |
| 183 | Metallic and non-metallic products and materials, welded joints | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | |
| 184 | Castings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 1371-2:2015-03 | PN-EN 1371-1:2012 | |
| 185 | Forgings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 10228-2:2016-07 | |
| 186 | Steel pipes | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN ISO 10893-4:2011 | |
| 187 | Ferromagnetic metal products and materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | |
| 188 | Castings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 1369:2013-04 | |
| 189 | Forgings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 10228-1:2016-07 | |
| 190 | Ferromagnetic steel pipes | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN ISO 10893-5:2011 | |
| 191 | Welded joints in ferromagnetic materials | Surface and subsurface welding imperfections | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN EN ISO 17638:2017-01 | |
| 192 | Technical equipment and its components, rolled steel products | Shape imperfection and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 13018:2016-04 | |
| 193 | Welded joints in metallic materials | Welding imperfections and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17637:2017-02 | |
| 194 | Metal pipes | Technological properties of pipes: bend test flattening test drift-expanding test ring-expanding test ring tensile test |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 8491:2005 | PN-EN ISO 8492:2014-02 | PN-EN ISO 8493:2005 | PN-EN ISO 8495:2014-02 | PN-EN ISO 8496:2014-02 | ||
| 195 | Weld metals and clad layers of austenitic stainless steels and duplex steels and austenitic steels | Delta ferrite content | Magnetic induction method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 8249:2018-11 | |
| 196 | Metals and metal alloys | Grain size, Optical microscopy | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-H-04507-01:1984 | PN-H-04507-01:1984/Az1:1998 | PN-EN ISO 2624:1997 | PN-EN ISO 643:2025-02 | ||
| 197 | Iron-based (Fe) products and materials | Element | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024 | ||
| 198 | Iron-based (Fe) products and materials | Name, Symbol, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024 | ||
| 199 | Iron-based (Fe) products and materials | Carbon, Silicon, Manganese, Phosphorus, Sulphur, Chromium, Molybdenum, Nickel, Aluminium, Arsenic, Cobalt, Copper, Niobium, Tin, Titanium, Vanadium, Tungsten, Iron, C, Si, Mn, P, S, Cr, Mo, Ni, Al, As, Co, Cu, Nb, Sn, Ti, V, W, Fe 0,01 - 3,80 0,008-2,50 0,13 - 31,60 0,007 - 0,14 0,0025 - 0,190 0,006 - 28,00 0,007 - 10,35 0,014 - 38,9 0,005 - 9,50 0,006 - 0,08 0,0061 - 11,0 0,020 - 1,00 0,005 - 1,80 0,002 - 0,100 0,006 - 1,45 0,002 - 2,10 0,050 - 22,4, Balance | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024 | |
| 200 | Aluminium-based (Al) products and materials | Element | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024 | ||
| 201 | Aluminium-based (Al) products and materials | Name, Symbol, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024 | ||
| 202 | Aluminium-based (Al) products and materials | Silicon, Iron, Copper, Manganese, Magnesium, Chromium, Nickel, Zinc, Titanium, Vanadium, Aluminium, Si, Fe, Cu, Mn, Mg, Cr, Ni, Zn, Ti, V, Al 0,05 -16,8 0,13 - 1,5 0,01 - 13,40 0,01 - 2,10 0,01 - 3,90 0,028 - 0,40 0,02 - 3,55 0,02 - 9,10 0,01 - 0,40 0,013 - 0,050, Balance | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024 | |
| 203 | Nickel-based (Ni) products and materials | Element | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024 | ||
| 204 | Nickel-based (Ni) products and materials | Name, Symbol, Range in % | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024 | ||
| 205 | Nickel-based (Ni) products and materials | Silicon, Manganese, Chromium, Iron, Molybdenum, Magnesium, Copper, Cobalt, Niobium, Aluminium, Titanium, Nickel, Si, Mn, Cr, Fe, Mo, Mg, Cu, Co, Nb, Al, Ti, Ni 0,02 - 1,00 0,022 - 1,85 0,05 - 25,7 0,004 - 50,8 0,19 - 18,8 0,001 - 0,09 0,05 - 35,65 0,058 - 18,80 0,029 - 5,70 0,005 - 4,80 0,009 - 3,80, Balance | Spark excitation atomic emission spectrometry (OES) | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024 | |
| 206 | Products made of metallic materials with equivalent thickness up to 30 mm Fe | Internal discontinuities | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 5579:2014-02 | PN-EN 444:1998 | |
| 207 | Castings with equivalent thickness up to 30 mm Fe | Material discontinuities | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 5579:2014-02 | PN-EN 444:1998 | PN-EN 12681:2018-01 | |
| 208 | Welded joints with equivalent thickness up to 30 mm Fe | Welding imperfections | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17636-1:2023-02 | PN-EN 1435:2001 | |
| 209 | Welded steel pipes with equivalent thickness up to 30 mm Fe | Welding discontinuities | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 5579:2014-02 | PN-EN 444:1998 | PN-EN ISO 10893-6:2011 | |
| 210 | Metals and metal alloys | Hardness | UCI method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | DIN 50159-1:2022-06 | ASTM A1038-19 | |
| LABORATORY TESTING DEPARTMENT (OL) IN PŁOCK | |||||
| 211 | Welded joints in metallic materials | Welding imperfections | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 17640:2019-01 | PN-EN 1714:2002 | |
| 212 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 16823:2014-06 | |
| 213 | Flat steel products | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10160:2001 | |
| 214 | Steel forgings | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10228-3:2016-07 | PN-EN 10228-4:2016-07 | |
| 215 | Metallic and non-metallic products and materials | Thicknesses in the equivalent range for steel (0,6 - 300) mm |
Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16809:2019-08 | |
| 216 | Metallic and non-metallic products and materials, welded joints | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | |
| 217 | Castings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 1371-2:2015-03 | PN-EN 1371-1:2012 | |
| 218 | Forgings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 10228-2:2016-07 | |
| 219 | Steel pipes | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN ISO 10893-4:2011 | |
| 220 | Ferromagnetic metal products and materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | |
| 221 | Castings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 1369:2013-04 | |
| 222 | Forgings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 10228-1:2016-07 | |
| 223 | Ferromagnetic steel pipes | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN ISO 10893-5:2011 | |
| 224 | Welded joints in ferromagnetic materials | Surface and subsurface welding imperfections | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN EN ISO 17638:2017-01 | |
| 225 | Technical equipment and its components, rolled steel products | Shape imperfection and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 13018:2016-04 | |
| 226 | Welded joints in metallic materials | Welding imperfections and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17637:2017-02 | |
| 227 | Metals and metal alloys | Hardness | UCI method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | DIN 50159-1:2022-06 | ASTM A1038-19 | |
| LABORATORY TESTING DEPARTMENT (OL) IN KRAKÓW | |||||
| 228 | Welded joints in metallic materials | Welding imperfections | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 17640:2019-01 | PN-EN 1714:2002 | |
| 229 | Technical equipment, steel and building structures, their components and safety devices, materials for their manufacture, permanent joints | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 16823:2014-06 | PN-EN ISO 16826:2014-06 | PN-EN ISO 16827:2014-06 | |
| 230 | Flat steel products | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10160:2001 | |
| 231 | Steel forgings | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10228-3:2016-07 | PN-EN 10228-4:2016-07 | |
| 232 | Welded joints in austenitic steels and nickel-based alloys | Internal welding imperfections | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 22825:2017-12 | |
| 233 | Metallic and non-metallic products and materials | Thicknesses in the range equivalent to steel (0,6 - 300) mm |
Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16809:2019-08 | |
| 234 | Technical equipment, steel, engineering and fibre-reinforced composite structures, their components and safety devices, materials for their manufacture, joints. | Detection, location, monitoring and classification of AE signal sources generated by surface and internal defects (damage) in the walls, welds and components of the tested device (object) subjected to loading during the test. Revealing defects and damage active during loading, such as: cracks and their growth and other discontinuities in the material structure, local plastic deformation, leakage and lack of tightness, material degradation due to corrosion causing local weakening of the structure of the equipment material. Detection, location, monitoring and classification of AE signal sources generated by active processes caused by general or local corrosion or generated by leakage (leak). Monitoring of the condition of equipment and structures under operating conditions. |
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 13554:2011 | PN-EN 14584:2013-07 | PN-EN ISO 16148:2016-08/A1:2020-11 | PN-EN 15856:2010 | PN-EN 15857:2010 | PN-EN ISO 18081:2025-01 ASME BPVC.V-2021 Article 12. | ASTM E1139/E1139M-17 | ISO 19835:2018 | ISO 4310:2009 | ||
| 235 | Welded joints in metallic materials | Welding imperfections and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17637:2017-02 | |
| 236 | Technical equipment and its components, rolled steel products | Shape imperfection and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 13018:2016-04 | |
| 237 | Metallic and non-metallic products and materials, welded joints | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | |
| 238 | Castings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 1371-2:2015-03 | PN-EN 1371-1:2012 | |
| 239 | Forgings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 10228-2:2016-07 | |
| 240 | Steel pipes | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN ISO 10893-4:2011 | |
| 241 | Ferromagnetic metal products and materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | |
| 242 | Castings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 1369:2013-04 | |
| 243 | Forgings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 10228-1:2016-07 | |
| 244 | Ferromagnetic steel pipes | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN ISO 10893-5:2011 | |
| 245 | Welded joints in ferromagnetic materials | Surface and subsurface welding imperfections | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN EN ISO 17638:2017-01 | |
| 246 | Products made of metallic materials with equivalent thickness up to 30 mm Fe | Internal discontinuities | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 5579:2014-02 | PN-EN 444:1998 | |
| 247 | Castings with equivalent thickness up to 30 mm Fe | Material discontinuities | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 5579:2014-02 | PN-EN 444:1998 | PN-EN 12681:2018-01 | |
| 248 | Welded joints with equivalent thickness up to 30 mm Fe | Welding imperfections | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17636-1:2023-02 | PN-EN 1435:2001 | |
| 249 | Welded steel pipes with equivalent thickness up to 30 mm Fe | Welding discontinuities | Radiographic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 5579:2014-02 | PN-EN 444:1998 | PN-EN ISO 10893-6:2011 | |
| 250 | Metals and metal alloys | Hardness | UCI method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | DIN 50159-1:2022-06 | ASTM A1038-19 | |
| 251 | Technical equipment, steel and building structures, their components and safety devices, protective automation and control systems | Dynamic stresses Range (0 - 4000) MPa |
Resistance strain gauge method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | LW-1/IN/44 wyd. 2.00 z dnia 09.06.2023 | |
| LABORATORY TESTING DEPARTMENT (OL) IN GLIWICE | |||||
| 252 | Welded joints in metallic materials | Welding imperfections | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN ISO 17640:2019-01 | PN-EN 1714:2002 | |
| 253 | Flat steel products | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10160:2001 | |
| 254 | Steel forgings | Material discontinuities | Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16810:2025-04 | PN-EN 10228-3:2016-07 | PN-EN 10228-4:2016-07 | |
| 255 | Metallic and non-metallic products and materials | Thicknesses in the equivalent range for steel (2,0 - 300) mm |
Ultrasonic method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 16809:2019-08 | |
| 256 | Metallic and non-metallic products and materials, welded joints | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | |
| 257 | Castings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 1371-2:2015-03 | PN-EN 1371-1:2012 | |
| 258 | Forgings | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN 10228-2:2016-07 | |
| 259 | Steel pipes | Surface discontinuities | Penetrant testing method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 3452-1:2021-12 | PN-EN 571-1:1999 | PN-EN ISO 10893-4:2011 | |
| 260 | Ferromagnetic metal products and materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | |
| 261 | Castings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 1369:2013-04 | |
| 262 | Forgings of ferromagnetic materials | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN 10228-1:2016-07 | |
| 263 | Ferromagnetic steel pipes | Surface and subsurface discontinuities | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN ISO 10893-5:2011 | |
| 264 | Welded joints in ferromagnetic materials | Surface and subsurface welding imperfections | Magnetic particle method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 9934-1:2017-02 | PN-EN EN ISO 17638:2017-01 | |
| 265 | Welded joints in metallic materials | Welding imperfections and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN ISO 17637:2017-02 | |
| 266 | Technical equipment and its components, rolled steel products | Shape imperfection and surface discontinuities | Visual method | * Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje | PN-EN 13018:2016-04 | |
| Test methods | |||||
| 267 | Number of the decision, of the Commission | Product(s) Regulated area: ASSESSMENT OF PERFORMANCE ( System 3) Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC The laboratory meets the requirements set out in Regulation No 305/2011 of 9 March 2011 within the scope of the activities provided for a testing laboratory ( Annex V, subpoint 3 of Regulation No 305/2011) in the above scope. |
Zharmonizowane specyfikacje techniczne | ||
| 268 | 1999/471/EC | Solid fuel heating boilers with heat output up to 50 kW. Regulated area: ASSESSMENT OF PERFORMANCE ( System 3) Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC The laboratory meets the requirements set out in Regulation No 305/2011 of 9 March 2011 within the scope of the activities provided for a testing laboratory ( Annex V, subpoint 3 of Regulation No 305/2011) in the above scope. |
EN 12809:2001 | EN 12809:2001/A1:2004 | EN 12809:2001/A1:2004/AC:2007 | EN 12809:2001/AC:2006 | ||
| 269 | 1999/471/EC | Solid fuel cookers. Regulated area: ASSESSMENT OF PERFORMANCE ( System 3) Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC The laboratory meets the requirements set out in Regulation No 305/2011 of 9 March 2011 within the scope of the activities provided for a testing laboratory ( Annex V, subpoint 3 of Regulation No 305/2011) in the above scope. |
EN 12815:2001 | EN 12815:2001/A1:2004 | EN 12815:2001/A1:2004/AC:2007 | EN 12815:2001/AC:2006 | ||
| 270 | 1999/471/EC | Solid fuel room heaters. Regulated area: ASSESSMENT OF PERFORMANCE ( System 3) Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC The laboratory meets the requirements set out in Regulation No 305/2011 of 9 March 2011 within the scope of the activities provided for a testing laboratory ( Annex V, subpoint 3 of Regulation No 305/2011) in the above scope. |
EN 13240:2001 | EN 13240:2001/A2:2004 | EN 13240:2001/A2:2004/AC:2007 | EN 13240:2001/AC:2006 | ||
| 271 | 1999/471/EC | Fireplace inserts including open fireplaces fired by solid fuels. Regulated area: ASSESSMENT OF PERFORMANCE ( System 3) Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC The laboratory meets the requirements set out in Regulation No 305/2011 of 9 March 2011 within the scope of the activities provided for a testing laboratory ( Annex V, subpoint 3 of Regulation No 305/2011) in the above scope. |
EN 13229:2001 | EN 13229:2001/A1:2003 | EN 13229:2001/A2:2004 | EN 13229:2001/A2:2004/AC:2007 | EN 13229:2001/AC:2006 | ||
Reference standards (221)
* Badania, na podstawie wyników których laboratorium formułuje opinie i interpretacje
ASTM A1038-19
ASTM A370-24a
ASTM E1139/E1139M-17
ASTM E23-24
ASTM E8/E8M-24
DIN 50159-1:2022-06
EN 12809:2001
EN 12809:2001/A1:2004
EN 12809:2001/A1:2004/AC:2007
EN 12809:2001/AC:2006
EN 12814-2:2000
EN 12815:2001
EN 12815:2001/A1:2004
EN 12815:2001/A1:2004/AC:2007
EN 12815:2001/AC:2006
EN 13229:2001
EN 13229:2001/A1:2003
EN 13229:2001/A2:2004
EN 13229:2001/A2:2004/AC:2007
EN 13229:2001/AC:2006
EN 13240:2001
EN 13240:2001/A2:2004
EN 13240:2001/A2:2004/AC:2007
EN 13240:2001/AC:2006
EN 303-5:2021
EN 55011:2016
EN 55011:2016/A11:2020
EN 55011:2016/A1:2017
EN 55011:2016/A2:2021
EN 55016-2-3:2017
EN 55016-2-3:2017/A1:2019
EN 55016-2-3:2017/A2:2023
EN 55032:2015
EN 55032:2015/A11:2020
EN 55032:2015/A1:2020
EN 61000-3-3:2013
EN 61000-3-3:2013/A1:2019
EN 61000-3-3:2013/A2:2021
EN 61000-4-4:2012
EN 61000-4-5:2014
EN 61000-4-5:2014/A1 :2017
EN IEC 55014-1:2021
EN IEC 61000-3-2:2019
EN IEC 61000-3-2:2019/A1:2021
EN IEC 61000-3-2:2019/A2:2024
ISO 19835:2018
ISO 4310:2009
LW-1/IN/103 Wydanie 4.00 z dnia 12.06.2024
LW-1/IN/105 wyd.3.00 z dnia 23.06.2025
LW-1/IN/127 wydanie 2.00 z dnia 21.08.2024
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/30
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/31
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/32
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/33
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/34
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/36
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/37
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/40
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/41
LW-1/IN/21 Wydanie 4.00 z dnia 09.06.2023 metoda LW-1/45
LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/52
LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/53
LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/54
LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/55
LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/56
LW-1/IN/22 wyd. 2.00 z dnia 09.06.2023 metoda LW-1/61
LW-1/IN/38 wyd. 2 z dnia 16.03.2020
LW-1/IN/43 wyd. 2 z dnia 14.05.2020
LW-1/IN/44 wyd. 2.00 z dnia 09.06.2023
LW-1/IN/51 wyd.2.00 z dnia 09.06.2023
LW-1/IN/63 wyd. 2.00 z dnia 09.06.2023
LW-1/IN/81 wyd.2 z dnia 12.09.2022
LW-1/IN/82 Wydanie 2.00 z dnia 09.06.2023
LW-1/IN/83 wyd.4.00 z dnia 09.06.2023
LW-1/IN/84 wyd.4.00 z dnia 27.08.2025
LW-1/IN/86 wyd. 2.00 z dnia 09.06.2023
LW-1/IN/87 Wydanie 3.00 z dnia 21.06.2024
LW-1/IN/90 Wydanie 2.00 z dnia 09.06.2023
PN ISO 1217:1999 z załącznikiem C
PN-63/H-04504
PN-64/H-04510
PN-66/H-04505
PN-75/H-04661 LW-1/IN/103 Wydanie 4.00 z dnia 12.06.2024
PN-87/B-02156
PN-EN 10160:2001
PN-EN 10228-1:2016-07
PN-EN 10228-2:2016-07
PN-EN 10228-3:2016-07
PN-EN 10228-4:2016-07
PN-EN 12681-2:2017-12
PN-EN 12681:2018-01
PN-EN 12809:2002 „N“
PN-EN 12814-1:2002
PN-EN 12814-2:2021-06
PN-EN 12814-4:2018-05
PN-EN 12814-5:2002
PN-EN 12814-7:2024-09
PN-EN 12815:2004 „N“
PN-EN 13018:2016-04
PN-EN 13100-1:2017-07
PN-EN 13100-3:2006
PN-EN 13229:2002 „N“
PN-EN 13240:2008 „N“
PN-EN 13554:2011
PN-EN 1369:2013-04
PN-EN 1371-1:2012
PN-EN 1371-2:2015-03
PN-EN 14127:2011
PN-EN 1435:2001
PN-EN 14584:2013-07
PN-EN 15856:2010
PN-EN 15857:2010
PN-EN 1714:2002
PN-EN 303-5+A 1:2023-05
PN-EN 303-5:2021-09
PN-EN 444:1998
PN-EN 55011:2016-05
PN-EN 55011:2016-05/ A1:2017-06
PN-EN 55011:2016-05/ A2:2021-08
PN-EN 55011:2016-05/A11:2020-07
PN-EN 55016-2-3:2017
PN-EN 55016-2-3:2017-06/A1:2020-01
PN-EN 55016-2-3:2017-06/A2:2024-03
PN-EN 55032:2015-09
PN-EN 55032:2015-09/ A11:2020-07
PN-EN 55032:2015-09/ A1:2021-05
PN-EN 571-1:1999
PN-EN 59:2016-03
PN-EN 60068-2-75:2015-01
PN-EN 60529:2003/A2:2014-07 *
PN-EN 61000-3-3:2013-10
PN-EN 61000-3-3:2013-10/ A1:2019-10
PN-EN 61000-3-3:2013-10/ A2:2022-04
PN-EN 61000-4-4:2013-05
PN-EN 61000-4-5:2014-10
PN-EN 61000-4-5:2014-10/A1:2018-01
PN-EN 62262:2003 *
PN-EN 81-50:2020-08 p. 5.14
PN-EN 81-50:2020-08 p. 5.2
PN-EN 81-50:2020-08 p. 5.3.2 *
PN-EN 81-50:2020-08 p. 5.4
PN-EN EN ISO 17638:2017-01
PN-EN IEC 55014-1:2021-08
PN-EN IEC 61000-3-2:2019-04
PN-EN IEC 61000-3-2:2019-04/A1:2021-08
PN-EN IEC 61000-3-2:2019-04/A2:2024-12
PN-EN ISO 10052:2021-12
PN-EN ISO 10863:2020-12
PN-EN ISO 10893-4:2011
PN-EN ISO 10893-5:2011
PN-EN ISO 10893-6:2011
PN-EN ISO 11201:2012
PN-EN ISO 1172:2024-03 metoda A
PN-EN ISO 1183-1:2019-05 (metoda A)
PN-EN ISO 13588:2019-04
PN-EN ISO 14125:2001
PN-EN ISO 14271:2017-11
PN-EN ISO 14271:2017-11 LW-1/IN/101 wyd.2.00 z dnia 09.06.2023
PN-EN ISO 148-1:2017-02
PN-EN ISO 16148:2016-08/A1:2020-11
PN-EN ISO 16809:2019-08
PN-EN ISO 16810:2025-04
PN-EN ISO 16823:2014-06
PN-EN ISO 16826:2014-06
PN-EN ISO 16827:2014-06
PN-EN ISO 16828:2014-06
PN-EN ISO 17636-1:2023-02
PN-EN ISO 17636-2:2023-04
PN-EN ISO 17637:2017-02
PN-EN ISO 17639 :2022-07 LW-1/IN/103 Wydanie 4.00 z dnia 12.06.2024
PN-EN ISO 17639:2022-07
PN-EN ISO 17640:2019-01
PN-EN ISO 178:2019-06
PN-EN ISO 18081:2025-01 ASME BPVC.V-2021 Article 12.
PN-EN ISO 2039-1:2004
PN-EN ISO 22825:2017-12
PN-EN ISO 2624:1997
PN-EN ISO 3452-1:2021-12
PN-EN ISO 3744 :1999
PN-EN ISO 3744 :2011 Załącznik nr 4 do Rozporządzenia Ministra Gospodarki z dnia 21 grudnia 2005 (Dz.U. 263 poz. 2202)
PN-EN ISO 3746:1999 Załącznik nr 4 do Rozporządzenia Ministra Gospodarki z dnia 21 grudnia 2005 (Dz.U. 263 poz. 2202)
PN-EN ISO 3746:2011
PN-EN ISO 3746:2011/Ap1:2017-09
PN-EN ISO 4136:2022-12
PN-EN ISO 5167-1:2022-12
PN-EN ISO 5167-2:2022-12
PN-EN ISO 5173:2010
PN-EN ISO 5173:2023-06
PN-EN ISO 5178:2019-04
PN-EN ISO 527-1:2020-01
PN-EN ISO 527-2:2012
PN-EN ISO 527-3:2019-01
PN-EN ISO 527-4:2023-10
PN-EN ISO 527-5:2022-06
PN-EN ISO 5579:2014-02
PN-EN ISO 643:2025-02
PN-EN ISO 6506-1:2014-12
PN-EN ISO 6507-1:2024-04
PN-EN ISO 6508-1:2024-06
PN-EN ISO 6892-1:2020-05 metoda B
PN-EN ISO 6892-2:2018-08
PN-EN ISO 6892-2:2018-08 metoda A
PN-EN ISO 7438:2021-04
PN-EN ISO 8249:2018-11
PN-EN ISO 8491:2005
PN-EN ISO 8492:2014-02
PN-EN ISO 8493:2005
PN-EN ISO 8495:2014-02
PN-EN ISO 8496:2014-02
PN-EN ISO 9015-1:2011
PN-EN ISO 9016:2022-09
PN-EN ISO 9017:2018-03
PN-EN ISO 9018:2016-01
PN-EN ISO 945-1:2019-09
PN-EN ISO 9934-1:2017-02
PN-H-04507-01:1984
PN-H-04507-01:1984/Az1:1998
PN-ISO 3057:2000
PN-ISO 3057:2000 LW-1/IN/103 Wydanie 4.00 z dnia 12.06.2024
Zharmonizowane specyfikacje techniczne