🇨🇿 STARMANS electronics, s.r.o. PL

ČIA 2428 • Praha 8, Czech Republic • 2 calibration items

Metrology & calibration

STARMANS electronics, s.r.o. is a calibration laboratory accredited by ČIA under number 2428 (Praha 8, Czech Republic). Its accreditation scope covers 2 calibration items in the following areas: Metrology & calibration. Calibrated items include: Deformation pressure gauges with transducer (gauge pressure, absolu…, Resistance temperature sensors with transducer. Most frequently used calibration principles: Comparison with a reference deformation pressure gauge, Comparison with a reference thermometer.

At a glance

Accreditation number: ČIA 2428
Calibration items in scope: 2
Types of calibrated items: 2
Calibration principles used: 2
City: Praha 8, Czech Republic
Valid until: 20-04-2029

Accreditation number: 2428
Accreditation body: ČIA
Address: V zahradách 839/26, Libeň, 180 00 Praha 8
City: Praha 8, Czech Republic
Division: Laboratorium wzorcujące STARMANS
Valid until: 20-04-2029

What this laboratory calibrates (2)

Deformation pressure gauges with transducer (gauge pressure, absolute pressure) — 1 calibration item
Resistance temperature sensors with transducer — 1 calibration item

Calibration principles (2)

Comparison with a reference deformation pressure gauge — 1 calibration item
Comparison with a reference thermometer — 1 calibration item

Certificate information

Certificate date: 20.04.2026

Accreditation scope — calibration items (2)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Deformation pressure gauges with transducer (gauge pressure, absolute pressure)	Calibration – pressure 0 kPa to 1000 kPa · CMC 1,3 kPa 1 MPa to 2 MPa · CMC 2,7 kPa 2 MPa to 7 MPa · CMC 9,0 kPa CMC for the field of measured quantity: Pressure	Comparison with a reference deformation pressure gauge	KL/2/25
2	Resistance temperature sensors with transducer	Calibration – temperature -25 °C to 70 °C · CMC 0,32 °C CMC for the field of measured quantity: Temperature	Comparison with a reference thermometer	KL/1/25

Reference standards (2)

KL/1/25

KL/2/25

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2428