🇨🇿 Daniel Zindler PL

ČIA 2401 • Zlín, Czech Republic • 55 calibration items

Metrology & calibration

Daniel Zindler is a calibration laboratory accredited by ČIA under number 2401 (Zlín, Czech Republic). Its accreditation scope covers 55 calibration items in the following areas: Metrology & calibration. Calibrated items include: Direct indicating thermometers, Angles 90°, Parallel gauge blocks, Rules. Most frequently used calibration principles: Direct measurement on a length gauge, Direct measurement with a standard scale, Direct measurement with reference parallel gauge blocks, gauges and….

At a glance

Accreditation number: ČIA 2401
Calibration items in scope: 55
Types of calibrated items: 47
Calibration principles used: 27
City: Zlín, Czech Republic
Valid until: 22-12-2030

Accreditation number: 2401
Accreditation body: ČIA
Address: Voženílkova 5561, 760 05 Zlín
City: Zlín, Czech Republic
Division: Laboratorium wzorcujące Zindler
Valid until: 22-12-2030

What this laboratory calibrates (47)

Direct indicating thermometers — 5 calibration items
Angles 90° — 2 calibration items
Parallel gauge blocks — 2 calibration items
Rules — 2 calibration items
Threaded rings — 2 calibration items
Calibration foils — 1 calibration item
Check bars — 1 calibration item
Conical thread gauges and rings — 1 calibration item
Cylindrical, flat, slot, square and hexagonal gauges — 1 calibration item
Dial and digital indicators — 1 calibration item
Dial indicators with measuring arms for external measurement — 1 calibration item
Dial indicators with measuring arms for internal measurement — 1 calibration item
Feeler gauges — 1 calibration item
Folding rules — 1 calibration item
Gauges — 1 calibration item
and 32 more

Calibration principles (27)

Direct measurement on a length gauge — 10 calibration items
Direct measurement with a standard scale — 7 calibration items
Direct measurement with reference parallel gauge blocks, gauges and rings — 7 calibration items
Direct measurement by a special measuring device or a length gauge — 4 calibration items
Direct measurement with a linear height gauge with a length sensor for the measurement of perpendicularity and straightness — 2 calibration items
Direct measurement with parallel gauge blocks — 2 calibration items
Direct measurement with reference rings — 2 calibration items
Indirect measurement on a length gauge — 2 calibration items
Comparative measurement with a standard thermometer in a climatic chamber — 1 calibration item
Comparative measurement with a standard thermometer in a dry block — 1 calibration item
Comparative measurement with a standard thermometer in a horizontal furnace — 1 calibration item
Comparative measurement with a standard thermometer in a liquid bath — 1 calibration item
Comparative measurement with a standard thermometer in a mixture of ice and water — 1 calibration item
Comparison with a standard target black body — 1 calibration item
Comparison with a threaded comparison pin gauge, ring — 1 calibration item
and 12 more

Certificate information

Certificate date: 22.12.2025

Accreditation scope — calibration items (55)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Slide gauges, slide depth gauges, slide height gauges, sliding gear tooth calipers, gauges for checking welds	Calibration – length 0 mm to 2000 mm · CMC (10·L + 10) µm CMC for the field of measured quantity: Length	Direct measurement with reference parallel gauge blocks, gauges and rings	KP 10
2	Linear height gauges	Calibration – length 0 mm to 1000 mm · CMC (2·L + 0,5) µm CMC for the field of measured quantity: Length	Direct measurement with reference parallel gauge blocks, gauges and rings	KP 10
3	Micrometer calliper gauges	Calibration – length 0 mm to 25 mm · CMC 0,5 µm 25 mm to 1000 mm · CMC (7·L + 1,3) µm CMC for the field of measured quantity: Length	Direct measurement with reference parallel gauge blocks, gauges and rings	KP 11
4	Micrometer depth gauges	Calibration – length 0 mm to 300 mm · CMC (15·L + 1,5) µm CMC for the field of measured quantity: Length	Direct measurement with reference parallel gauge blocks, gauges and rings	KP 11
5	Micrometers with prismatic anvils	Calibration – length 1 mm to 150 mm · CMC (10·L + 1,5) µm CMC for the field of measured quantity: Length	Direct measurement with reference parallel gauge blocks, gauges and rings	KP 11
6	Pasameters	Calibration – length 0 mm to 200 mm · CMC (4·L + 0,5) µm CMC for the field of measured quantity: Length	Direct measurement with reference parallel gauge blocks, gauges and rings	KP 11
7	Micropasameters	Calibration – length 0 mm to 200 mm · CMC (7·L + 1,3) µm CMC for the field of measured quantity: Length	Direct measurement with reference parallel gauge blocks, gauges and rings	KP 11
8	Two-contact and three-contact inside micrometers	Calibration – length 2 mm to 250 mm · CMC (5·L + 1,6) µm CMC for the field of measured quantity: Length	Direct measurement with reference rings	KP 11
9	Inside micrometer gauges, extension rods	Calibration – length 0 mm to 1000 mm · CMC (5·L + 1,5) µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
10	Micrometric heads	Calibration – length 0 mm to 50 mm · CMC (5·L + 1,2) µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
11	Thread gauges	Calibration – length 1 mm to 300 mm · CMC (5·L + 2,5) µm CMC for the field of measured quantity: Length	Indirect measurement on a length gauge	KP 12
12	Threaded rings	Calibration – length 3,5 mm to 200 mm · CMC (3·L + 2,5) µm CMC for the field of measured quantity: Length	Indirect measurement on a length gauge	KP 12
13	Threaded rings	Calibration – length 1 mm to 16 mm · CMC (6·L + 3,0) µm CMC for the field of measured quantity: Length	Comparison with a threaded wear gauge	KP 12
14	Conical thread gauges and rings	Calibration – length 1 mm to 50 mm · CMC (6·L + 10) µm CMC for the field of measured quantity: Length	Comparison with a threaded comparison pin gauge, ring	KP 12
15	Cylindrical, flat, slot, square and hexagonal gauges	Calibration – length 0 mm to 300 mm · CMC (5·L + 0,4) µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
16	Setting gauges for micrometers	Calibration – length 0 mm to 1000 mm · CMC (5·L + 0,4) µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
17	Measuring wires and cylindrical gauges	Calibration – length 0 mm to 100 mm · CMC (5·L + 0,4) µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
18	Snap gauges	Calibration – length 2 mm to 250 mm · CMC (5·L + 0,7) µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
19	Setting and limit rings	Calibration – length 2 mm to 250 mm · CMC (5·L + 0,7) µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
20	Feeler gauges	Calibration – length 0 mm to 10 mm · CMC (20·L + 0,6) µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
21	Calibration foils	Calibration – length 0 mm to 20 mm · CMC 0,4 µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
22	Wedges for joints	Calibration – length 0 mm to 30 mm · CMC 15 µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 12
23	Dial and digital indicators	Calibration – length 0 mm to 100 mm · CMC (5·L + 0,4) µm CMC for the field of measured quantity: Length	Direct measurement by a special measuring device or a length gauge	KP 12
24	Lever indicators	Calibration – length 0 mm to 10 mm · CMC (5·L + 0,4) µm CMC for the field of measured quantity: Length	Direct measurement by a special measuring device or a length gauge	KP 12
25	Length sensors	Calibration – length 0 mm to 100 mm · CMC (5·L + 0,4) µm CMC for the field of measured quantity: Length	Direct measurement by a special measuring device or a length gauge	KP 12
26	Internal gauges with indicator	Calibration – length 0 mm to 300 mm · CMC (5·L + 0,4) µm CMC for the field of measured quantity: Length	Direct measurement by a special measuring device or a length gauge	KP 12
27	Tape measures	Calibration – length 0 mm to 15 m · CMC (50·L + 150) µm CMC for the field of measured quantity: Length	Direct measurement with a standard scale	KP 13
28	Folding rules	Calibration – length 0 mm to 5 m · CMC (50·L + 180) µm CMC for the field of measured quantity: Length	Direct measurement with a standard scale	KP 13
29	Surveying tapes	Calibration – length 0 mm to 100 m · CMC (70·L + 40) µm CMC for the field of measured quantity: Length	Direct measurement with a standard scale	KP 13
30	Length gauges	Calibration – length 0 mm to 5 m · CMC (50·L + 50) µm CMC for the field of measured quantity: Length	Direct measurement with a standard scale	KP 13
31	Measuring tapes	Calibration – length 0 mm to 10 m · CMC (70·L + 50) µm CMC for the field of measured quantity: Length	Direct measurement with a standard scale	KP 13
32	Telescopic tubes	Calibration – length 0 mm to 5 m · CMC (50·L + 270) µm CMC for the field of measured quantity: Length	Direct measurement with a standard scale	KP 13
33	Laser distance meters	Calibration – length 0 mm to 5 m · CMC 0,2 mm CMC for the field of measured quantity: Length	Direct measurement with a standard scale	KP 13
34	Gauges	Calibration – length 0 mm to 200 mm · CMC (5·L + 2,0) µm CMC for the field of measured quantity: Length	Direct measurement by a 2D microscope	KP 13
35	Measuring tapes for circumference and diameter measurement	Calibration – length 0 mm to 300 mm · CMC (100·L + 30) µm CMC for the field of measured quantity: Length	Direct measurement with cylindrical gauges	KP 13
36	Thickness gauges with dial indicator	Calibration – length 0 mm to 100 mm · CMC (10·L + 1,0) µm CMC for the field of measured quantity: Length	Direct measurement with parallel gauge blocks	KP 14
37	Ultrasonic thickness gauges	Calibration – length 0 mm to 200 mm · CMC (10·L + 3,0) µm CMC for the field of measured quantity: Length	Direct measurement with step gauges and parallel gauge blocks	KP 14
38	Layer thickness measuring devices	Calibration – length 0 mm to 10 mm · CMC 2,0 µm CMC for the field of measured quantity: Length	Direct measurement with layer thickness standards	KP 14
39	Dial indicators with measuring arms for external measurement	Calibration – length 0 mm to 300 mm · CMC (10·L + 1,0) µm CMC for the field of measured quantity: Length	Direct measurement with parallel gauge blocks	KP 14
40	Dial indicators with measuring arms for internal measurement	Calibration – length 2 mm to 250 mm · CMC (10·L + 2,0) µm CMC for the field of measured quantity: Length	Direct measurement with reference rings	KP 14
41	Parallel gauge blocks	Calibration – length 3rd order — 0,1 mm to 0,5 mm · CMC (1·L + 0,1) µm 3rd order — 2,5 mm to 25 mm · CMC (1·L + 0,1) µm 4th order — 0,5 mm to 100 mm · CMC (2·L + 0,2) µm CMC for the field of measured quantity: Length	Comparison with parallel gauge blocks using a comparator	KP 15
42	Parallel gauge blocks	Calibration – length 5th order — 0,5 mm to 500 mm · CMC (5·L + 0,5) µm CMC for the field of measured quantity: Length	Comparison with parallel gauge blocks using a comparator or a length gauge	KP 15
43	Roughness meters	Calibration – length 0,01 µm to 6000 µm · CMC 5 % CMC for the field of measured quantity: Length	Direct measurement by roughness standards	KP 04
44	Roughness standards	Calibration – length 0,01 µm to 6000 µm · CMC 5 % CMC for the field of measured quantity: Length	Direct measurement on a roughness meter	KP 04
45	Rules	Calibration – length length up to 1 m — 0 mm to 10 mm · CMC (2·L + 1,5) µm CMC for the field of measured quantity: Length	Direct measurement with a linear height gauge with a length sensor for the measurement of perpendicularity and straightness	KP 29
46	Rules	Calibration – length length up to 2 m — 0 µm to 100 µm · CMC (4·L + 4,0) µm CMC for the field of measured quantity: Length	Direct measurement with parallel gauge blocks from the standard plane	KP 29
47	Check bars	Calibration – length length up to 2 m — 0 mm to 10 mm · CMC 30 µm CMC for the field of measured quantity: Length	Direct measurement with parallel gauge blocks on a surface plate	KP 29
48	Angles 90°	Calibration – length 0,40 m — 0 mm to 5 mm · CMC (4·L + 2,0) µm CMC for the field of measured quantity: Length	Direct measurement with a perpendicularity standard and parallel gauge blocks	KP 18
49	Angles 90°	Calibration – length length up to 1 m — 0 mm to 10 mm · CMC (4·L + 2,0) µm CMC for the field of measured quantity: Length	Direct measurement with a linear height gauge with a length sensor for the measurement of perpendicularity and straightness	KP 18
50	Direct indicating thermometers	Calibration – temperature 0 °C · CMC 0,05 °C CMC for the field of measured quantity: Temperature	Comparative measurement with a standard thermometer in a mixture of ice and water	KP 31
51	Direct indicating thermometers	Calibration – temperature 20 °C to 150 °C · CMC 0,07 °C CMC for the field of measured quantity: Temperature	Comparative measurement with a standard thermometer in a liquid bath	KP 31
52	Direct indicating thermometers	Calibration – temperature -18 °C to 45 °C · CMC 0,2 °C CMC for the field of measured quantity: Temperature	Comparative measurement with a standard thermometer in a climatic chamber	KP 31
53	Direct indicating thermometers	Calibration – temperature -30 °C to 100 °C · CMC 0,1 °C 100 °C to 200 °C · CMC 0,2 °C 200 °C to 300 °C · CMC 0,3 °C 300 °C to 400 °C · CMC 0,4 °C 400 °C to 500 °C · CMC 0,5 °C 500 °C to 600 °C · CMC 0,6 °C 600 °C to 660 °C · CMC 0,7 °C CMC for the field of measured quantity: Temperature	Comparative measurement with a standard thermometer in a dry block	KP 31
54	Direct indicating thermometers	Calibration – temperature 300 °C to 400 °C · CMC 1,3 °C 400 °C to 600 °C · CMC 1,5 °C 600 °C to 800 °C · CMC 2,0 °C 800 °C to 1100 °C · CMC 2,5 °C CMC for the field of measured quantity: Temperature	Comparative measurement with a standard thermometer in a horizontal furnace	KP 31
55	Non-contact thermometers	Calibration – temperature 35 °C to 100 °C · CMC 1,9 °C 100 °C to 200 °C · CMC 2,1 °C 200 °C to 350 °C · CMC 2,7 °C 350 °C to 500 °C · CMC 3,2 °C CMC for the field of measured quantity: Temperature	Comparison with a standard target black body	KP 34

Reference standards (11)

KP 04

KP 10

KP 11

KP 12

KP 13

KP 14

KP 15

KP 18

KP 29

KP 31

KP 34

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2401