Sign up
LabCoda / Accreditation scopes / 🇨🇿 Czech Republic / 2399

🇨🇿 VOP CZ, s.p. PL

ČIA 2399 • Šenov u Nového Jičína, Czech Republic • 36 calibration items

Metrology & calibration

VOP CZ, s.p. is a calibration laboratory accredited by ČIA under number 2399 (Šenov u Nového Jičína, Czech Republic). Its accreditation scope covers 36 calibration items in the following areas: Metrology & calibration. Calibrated items include: Alternating current / ammeters, multimeters, analogue and digital, Alternating-current voltage / voltmeters, multimeters, analogue and…, Angle gauges, Calibration foils. Most frequently used calibration principles: Measurement using parallel gauge blocks, Measurement on a universal length gauge, Measurement by a reference calibrator.

At a glance

  • Accreditation number: ČIA 2399
  • Calibration items in scope: 36
  • Types of calibrated items: 36
  • Calibration principles used: 20
  • City: Šenov u Nového Jičína, Czech Republic
  • Valid until: 22-01-2031
Accreditation number
2399
Accreditation body
ČIA
Address
Dukelská 102, 742 42 Šenov u Nového Jičína
City
Šenov u Nového Jičína, Czech Republic
Division
Laboratorium wzorcujące
Valid until
22-01-2031

What this laboratory calibrates (36)

Calibration principles (20)

Certificate information

Certificate date
22.01.2026

Accreditation scope — calibration items (36)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Slide gauges Calibration – length
0 mm to 250 mm · CMC (11·L + 12) µm 250 mm to 1000 mm · CMC (14·L + 19) µm
CMC for the field of measured quantity: Length
 Measurement using parallel gauge blocks KP-GL-2.1
2 Slide depth gauges Calibration – length
0 mm to 250 mm · CMC (11·L + 12) µm
CMC for the field of measured quantity: Length
 Measurement using parallel gauge blocks KP-GL-2.8
3 Slide height gauges Calibration – length
0 mm to 1000 mm · CMC (14·L + 19) µm
CMC for the field of measured quantity: Length
 Measurement using parallel gauge blocks KP-GL-2.9
4 Weld gauges Calibration – length
0 mm to 100 mm · CMC (14·L + 120) µm
CMC for the field of measured quantity: Length
 Measurement using parallel gauge blocks KP-GL-2.7
5 Micrometer calliper gauges Calibration – length
0 mm to 200 mm · CMC (11·L + 1,5) µm 200 mm to 500 mm · CMC (14·L + 16) µm
CMC for the field of measured quantity: Length
 Measurement using parallel gauge blocks KP-GL-2.2
6 Pasameters Calibration – length
0 mm to 200 mm · CMC (11·L + 1,5) µm
CMC for the field of measured quantity: Length
 Measurement using parallel gauge blocks KP-GL-2.3
7 Dial indicators Calibration – length
0 mm to 25 mm · CMC (14·L + 1,5) µm
CMC for the field of measured quantity: Length
 Measurement on a dial indicator calibration instrument KP-GL-2.4
8 Two-contact internal gauges Calibration – length
0 mm to 200 mm · CMC (14·L + 1,3) µm
CMC for the field of measured quantity: Length
 Measurement on a dial indicator calibration instrument KP-GL-2.4
9 Thickness gauges Calibration – length
0 mm to 1 mm · CMC 1,2 µm
CMC for the field of measured quantity: Length
 Measurement with calibration sheets KP-GL-2.6
10 Plain cylindrical gauges Calibration – length
0 mm to 200 mm · CMC (14·L + 2,4) µm
CMC for the field of measured quantity: Length
 Measurement on a universal length gauge KP-GL-1.2
11 Male thread gauges for threads Calibration – length
3 mm to 100 mm · CMC (14·L + 2,8) µm
CMC for the field of measured quantity: Length
 Measurement on a universal length gauge KP-GL-4.1
12 Tape measures Calibration – length
0 mm to 10000 mm · CMC (0,042·L + 0,13) mm
CMC for the field of measured quantity: Length
 Comparison with a reference steel gauge KP-GL-1.7
13 Steel rules Calibration – length
0 mm to 2000 mm · CMC (0,042·L + 0,13) mm
CMC for the field of measured quantity: Length
 Comparison with a reference steel gauge KP-GL-1.6
14 Feeler gauges Calibration – length
0 mm to 10 mm · CMC (14·L + 1,9) µm
CMC for the field of measured quantity: Length
 Measurement on a universal length gauge KP-GL-1.4
15 Calibration foils Calibration – length
0 mm to 10 mm · CMC 1,9 µm
CMC for the field of measured quantity: Length
 Measurement on a universal length gauge KP-GL-1.9
16 Inside micrometer gauges Calibration – length
0 mm to 250 mm · CMC (14·L + 2,4) µm
CMC for the field of measured quantity: Length
 Measurement on a universal length gauge KP-GL-2.10
17 Surface rules Calibration – length
0 mm to 1100 mm · CMC (1,4·L + 7) µm
CMC for the field of measured quantity: Length
 Measurement using parallel gauge blocks on a flat plate KP-GL-3.1
18 Two-contact and three-contact inside micrometers Calibration – length
0 mm to 200 mm · CMC (14·L + 1,5) µm
CMC for the field of measured quantity: Length
 Measurement by setting rings KP-GL-2.11
19 Setting and limit rings Calibration – length
22 mm to 200 mm · CMC (14·L + 2,2) µm
CMC for the field of measured quantity: Length
 Comparison with a setting ring on a length gauge KP-GL-1.5
20 Straightness / 90° Angles Calibration – length
Arm length up to 630 mm — 0 mm to 4 mm · CMC (1,4·L + 9,2) µm Arm length from 630 mm to 1000 mm — 0 mm to 4 mm · CMC (2·L + 22) µm
CMC for the field of measured quantity: Length
 Measurement on a flat plate using a height gauge with a length sensor KP-GU-1.1
21 Roughness meters Calibration – length
0,01 µm to 350 µm · CMC 3,6 %
CMC for the field of measured quantity: Length
 Measurement using reference roughness plates KP-GL-5.2
22 Roughness standards and samples Calibration – length
0,01 µm to 350 µm · CMC Q[30; 50Rₓ]
CMC for the field of measured quantity: Length
 Contact measurement by a roughness meter KP-GL-5.1
23 Angle gauges Calibration – plane angle
0 ° to 360 ° · CMC 4,8´
CMC for the field of measured quantity: Plane angle
 Measurement using angle gauges KP-GU-2.1
24 Clinometers Calibration – plane angle
0 ° to 360 ° · CMC 0,12°
CMC for the field of measured quantity: Plane angle
 Measurement using a sine bar with parallel gauge blocks and a measuring cylinder KP-GU-2.2
25 Machinery and builder's levels (up to 2000 mm) Calibration – plane angle
0 mm/m to 87 mm/m · CMC 0,02 mm/m
CMC for the field of measured quantity: Plane angle
 Measurement using a sine bar with parallel gauge blocks and a measuring cylinder KP-GU-2.3
26 Torque / Torque wrenches and screwdrivers Calibration – force, mechanical tests
1 N·m to 1000 N·m · CMC 0,6 %
CMC for the field of measured quantity: Force, mechanical tests
 Comparison with a torque sensor KP-MS-3.1
27 Hardness / Hardness test plates and samples - Rockwell Calibration – force, mechanical tests
HRBW — 10 HRBW to 100 HRBW · CMC 1,3 % HRC — 20 HRC to 70 HRC · CMC 1,2 %
CMC for the field of measured quantity: Force, mechanical tests
 ČSN EN ISO 6508-3 KP-MS-2.3
28 Hardness / Hardness test plates and samples - Brinell Calibration – force, mechanical tests
HBW 2,5 — 10 HBW to 650 HBW · CMC 1,4 %
CMC for the field of measured quantity: Force, mechanical tests
 ČSN EN ISO 6506-3 KP-MS-2.4
29 Hardness / Hardness test plates and samples - Vickers Calibration – force, mechanical tests
HV 10 — 10 HV to 3000 HV · CMC 1,6 % HV 30 — 10 HV to 3000 HV · CMC 1,2 %
CMC for the field of measured quantity: Force, mechanical tests
 ČSN EN ISO 6507-3 KP-MS-2.2
30 Deformation pressure gauges Calibration – pressure
relative pressure; liquid and air — 0 MPa to 3 MPa · CMC 4,8 kPa relative pressure; liquid and air — 3 MPa to 20 MPa · CMC 32 kPa relative pressure; liquid and air — 20 MPa to 50 MPa · CMC 65 kPa relative pressure; liquid and air — 50 MPa to 140 MPa · CMC 190 kPa
CMC for the field of measured quantity: Pressure
 Comparison with a standard digital pressure gauge (EURAMET c.g. 17) KP-MT-1.1
31 Digital pressure gauges Calibration – pressure
relative pressure; liquid and air — 0 MPa to 3 MPa · CMC 3,8 kPa relative pressure; liquid and air — 3 MPa to 20 MPa · CMC 25 kPa relative pressure; liquid and air — 20 MPa to 50 MPa · CMC 37 kPa relative pressure; liquid and air — 50 MPa to 140 MPa · CMC 104 kPa
CMC for the field of measured quantity: Pressure
 Comparison with a standard digital pressure gauge (EURAMET c.g. 17) KP-MT-1.2
32 Direct-current voltage / voltmeters, multimeters, analogue and digital Calibration – electrical quantities
0 mV to 20 mV · CMC 0,035 % + 10 µV 20 mV to 100 mV · CMC 0,095 % 100 mV to 200 mV · CMC 0,029 % 0,2 V to 1 V · CMC 0,012 % 1 V to 2 V · CMC 0,0054 % 2 V to 10 V · CMC 0,0090 % 10 V to 20 V · CMC 0,0047 % 20 V to 100 V · CMC 0,0090 % 100 V to 240 V · CMC 0,0047 % 240 V to 1000 V · CMC 0,029 %
CMC for the field of measured quantity: Electrical quantities
 Measurement by a reference calibrator KP-EM-2.1, KP-EM-2.2
33 Alternating-current voltage / voltmeters, multimeters, analogue and digital Calibration – electrical quantities
20 Hz to 10 kHz — 10 mV to 20 mV · CMC 0,58 % 20 Hz to 10 kHz — 20 mV to 100 mV · CMC 0,56 % 20 Hz to 10 kHz — 100 mV to 200 mV · CMC 0,21 % 20 Hz to 10 kHz — 0,2 V to 1 V · CMC 0,066 % 20 Hz to 10 kHz — 1 V to 2 V · CMC 0,038 % 20 Hz to 10 kHz — 2 V to 10 V · CMC 0,066 % 20 Hz to 10 kHz — 10 V to 20 V · CMC 0,038 % 20 Hz to 10 kHz — 20 V to 100 V · CMC 0,58 % 20 Hz to 1 kHz — 100 V to 240 V · CMC 0,15 % 20 Hz to 1 kHz — 240 V to 1000 V · CMC 0,13 %
CMC for the field of measured quantity: Electrical quantities
 Measurement by a reference calibrator KP-EM-2.1, KP-EM-2.2
34 Direct current / ammeters, multimeters, analogue and digital Calibration – electrical quantities
1 µA to 200 µA · CMC 0,058 % + 20 nA 0,2 mA to 1 mA · CMC 0,078 % 1 mA to 2 mA · CMC 0,035 % 2 mA to 10 mA · CMC 0,045 % 10 mA to 20 mA · CMC 0,019 % 20 mA to 100 mA · CMC 0,046 % 100 mA to 200 mA · CMC 0,019 % 0,2 A to 1 A · CMC 0,072 % 1 A to 2 A · CMC 0,029 % 2 A to 10 A · CMC 0,13 % 10 A to 20 A · CMC 0,047 %
CMC for the field of measured quantity: Electrical quantities
 Measurement by a reference calibrator KP-EM-2.1, KP-EM-2.2
35 Alternating current / ammeters, multimeters, analogue and digital Calibration – electrical quantities
20 Hz to 1 kHz — 10 µA to 100 µA · CMC 0,52 % 20 Hz to 1 kHz — 100 µA to 200 µA · CMC 0,21 % 20 Hz to 1 kHz — 0,2 mA to 1 mA · CMC 0,24 % 20 Hz to 1 kHz — 1 mA to 2 mA · CMC 0,12 % 20 Hz to 1 kHz — 2 mA to 10 mA · CMC 0,18 % 20 Hz to 1 kHz — 10 mA to 20 mA · CMC 0,092 % 20 Hz to 1 kHz — 20 mA to 100 mA · CMC 0,17 % 20 Hz to 1 kHz — 100 mA to 200 mA · CMC 0,090 % 20 Hz to 1 kHz — 0,2 A to 1 A · CMC 0,21 % 20 Hz to 1 kHz — 1 A to 2 A · CMC 0,12 % 20 Hz to 1 kHz — 2 A to 10 A · CMC 0,49 % 20 Hz to 1 kHz — 10 A to 20 A · CMC 0,23 %
CMC for the field of measured quantity: Electrical quantities
 Measurement by a reference calibrator KP-EM-2.1, KP-EM-2.2
36 DC resistance / ohmmeters, multimeters, analogue and digital Calibration – electrical quantities
0 Ω to 100 Ω · CMC 0,036 % + 30 mΩ 100 Ω to 400 Ω · CMC 0,038 % 0,4 kΩ to 2 kΩ · CMC 0,023 % 2 kΩ to 10 kΩ · CMC 0,019 % 10 kΩ to 200 kΩ · CMC 0,018 % 0,2 MΩ to 1 MΩ · CMC 0,059 % 1 MΩ to 4 MΩ · CMC 0,12 % 4 MΩ to 20 MΩ · CMC 0,23 % 20 MΩ to 50 MΩ · CMC 0,59 %
CMC for the field of measured quantity: Electrical quantities
 Measurement by a reference calibrator or reference resistance KP-EM-2.1, KP-EM-2.2

Reference standards (32)

KP-EM-2.1
KP-EM-2.2
KP-GL-1.2
KP-GL-1.4
KP-GL-1.5
KP-GL-1.6
KP-GL-1.7
KP-GL-1.9
KP-GL-2.1
KP-GL-2.10
KP-GL-2.11
KP-GL-2.2
KP-GL-2.3
KP-GL-2.4
KP-GL-2.6
KP-GL-2.7
KP-GL-2.8
KP-GL-2.9
KP-GL-3.1
KP-GL-4.1
KP-GL-5.1
KP-GL-5.2
KP-GU-1.1
KP-GU-2.1
KP-GU-2.2
KP-GU-2.3
KP-MS-2.2
KP-MS-2.3
KP-MS-2.4
KP-MS-3.1
KP-MT-1.1
KP-MT-1.2

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2399