🇨🇿 Trescal s.r.o. PL

ČIA 2384 • Teplice, Czech Republic • 7 calibration items

Metrology & calibration

Trescal s.r.o. is a calibration laboratory accredited by ČIA under number 2384 (Teplice, Czech Republic). Its accreditation scope covers 7 calibration items in the following areas: Metrology & calibration. Calibrated items include: Cylindrical gauges, setting plugs, Dial indicators, Lever indicators, Outside micrometers. Most frequently used calibration principles: Measurement on special measuring equipment, Measurement or comparison on a length gauge, Measurement using gauge blocks.

At a glance

Accreditation number: ČIA 2384
Calibration items in scope: 7
Types of calibrated items: 7
Calibration principles used: 3
City: Teplice, Czech Republic
Valid until: 15-06-2027

Accreditation number: 2384
Accreditation body: ČIA
Address: Modlanská 1862, 415 01 Teplice
City: Teplice, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 15-06-2027

What this laboratory calibrates (7)

Cylindrical gauges, setting plugs — 1 calibration item
Dial indicators — 1 calibration item
Lever indicators — 1 calibration item
Outside micrometers — 1 calibration item
Precision indicators — 1 calibration item
Ring gauges, setting rings — 1 calibration item
Slide gauges, depth gauges, height gauges — 1 calibration item

Calibration principles (3)

Measurement on special measuring equipment — 3 calibration items
Measurement or comparison on a length gauge — 2 calibration items
Measurement using gauge blocks — 2 calibration items

Certificate information

Certificate date: 11.11.2025

Accreditation scope — calibration items (7)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Dial indicators	Calibration – length 0 mm to 60 mm · CMC 1,1 µm 60 mm to 100 mm · CMC 6,1 µm CMC for the field of measured quantity: Length	Measurement on special measuring equipment	KP 01
2	Precision indicators	Calibration – length 0 mm to 0,1 mm · CMC 0,5 µm 0,1 mm to 3 mm · CMC 0,8 µm CMC for the field of measured quantity: Length	Measurement on special measuring equipment	KP 01
3	Lever indicators	Calibration – length 0 mm to 5 mm · CMC 0,9 µm CMC for the field of measured quantity: Length	Measurement on special measuring equipment	KP 01
4	Slide gauges, depth gauges, height gauges	Calibration – length 0 mm to 300 mm · CMC 18 µm CMC for the field of measured quantity: Length	Measurement using gauge blocks	KP 02
5	Ring gauges, setting rings	Calibration – length 0 mm to 200 mm · CMC 2·10⁻³·d + 0,8 µm CMC for the field of measured quantity: Length	Measurement or comparison on a length gauge	KP 03
6	Cylindrical gauges, setting plugs	Calibration – length 0 mm to 300 mm · CMC 2·10⁻³·d + 0,8 µm CMC for the field of measured quantity: Length	Measurement or comparison on a length gauge	KP 03
7	Outside micrometers	Calibration – length 0 mm to 300 mm · CMC 10⁻²·l + 1,8 µm CMC for the field of measured quantity: Length	Measurement using gauge blocks	KP 04

Reference standards (4)

KP 01

KP 02

KP 03

KP 04

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2384