Sign up
LabCoda / Accreditation scopes / 🇨🇿 Czech Republic / 2381

🇨🇿 TEMPOS, spol. s r.o. PL

ČIA 2381 • Opava, Czech Republic • 4 calibration items

Metrology & calibration

TEMPOS, spol. s r.o. is a calibration laboratory accredited by ČIA under number 2381 (Opava, Czech Republic). Its accreditation scope covers 4 calibration items in the following areas: Metrology & calibration. Calibrated items include: Hardness of metals – hardness testers. Most frequently used calibration principles: Indirect calibration using hardness standards.

At a glance

  • Accreditation number: ČIA 2381
  • Calibration items in scope: 4
  • Types of calibrated items: 1
  • Calibration principles used: 1
  • City: Opava, Czech Republic
  • Valid until: 12-05-2028
Accreditation number
2381
Accreditation body
ČIA
Address
Solná 447/27, 746 01 Opava
City
Opava, Czech Republic
Division
KLT METROLOGIE
Valid until
12-05-2028

What this laboratory calibrates (1)

Calibration principles (1)

Certificate information

Certificate date
02.08.2023

Accreditation scope — calibration items (4)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Hardness of metals – hardness testers Calibration – force, mechanical tests
Brinell — 20 HWB to 600 HBW · CMC 0,32 %
CMC for the field of measured quantity: Force, mechanical tests
 Indirect calibration using hardness standards PN-KLT-1 (ČSN EN ISO 6506-2)
2 Hardness of metals – hardness testers Calibration – force, mechanical tests
Vickers — 100 HV to 2500 HV · CMC 0,30 %
CMC for the field of measured quantity: Force, mechanical tests
 Indirect calibration using hardness standards PN-KLT-2 (ČSN EN ISO 6507-2)
3 Hardness of metals – hardness testers Calibration – force, mechanical tests
Rockwell A — 60 HRA to 100 HRA · CMC 0,20 HR Rockwell B — 60 HRBW to 110 HRBW · CMC 0,20 HR Rockwell C — 20 HRC to 80 HRC · CMC 0,20 HR Rockwell E — 60 HREW to 115 HREW · CMC 0,20 HR Rockwell F — 60 HRFW to 100 HRFW · CMC 0,20 HR
CMC for the field of measured quantity: Force, mechanical tests
 Indirect calibration using hardness standards PM-KLT-3 (ČSN EN ISO 6508-2)
4 Hardness of metals – hardness testers Calibration – force, mechanical tests
Rockwell 15N — 20 HR15N to 100 HR15N · CMC 0,28 HR Rockwell 30N — 20 HR30N to 100 HR30N · CMC 0,28 HR Rockwell 45N — 20 HR45N to 70 HR45N · CMC 0,28 HR Rockwell 15T — 20 HR15TW to 100 HR15TW · CMC 0,28 HR Rockwell 30T — 20 HR30TW to 90 HR30TW · CMC 0,28 HR Rockwell 45T — 20 HR45TW to 80 HR45TW · CMC 0,28 HR
CMC for the field of measured quantity: Force, mechanical tests
 Indirect calibration using hardness standards PN-KLT-3 (ČSN EN ISO 6508-2)

Reference standards (7)

PM-KLT-3
PN-KLT-1
PN-KLT-2
PN-KLT-3
ČSN EN ISO 6506-2
ČSN EN ISO 6507-2
ČSN EN ISO 6508-2

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2381