🇨🇿 Bosch Rexroth, spol. s r.o. PL

ČIA 2365 • Brno, Czech Republic • 2 calibration items

Metrology & calibration

Bosch Rexroth, spol. s r.o. is a calibration laboratory accredited by ČIA under number 2365 (Brno, Czech Republic). Its accreditation scope covers 2 calibration items in the following areas: Metrology & calibration. Calibrated items include: Angle of rotation / screwdriving systems, Screwdriving systems. Most frequently used calibration principles: Measurement using a rotation angle sensor, Measurement using a torque sensor.

At a glance

Accreditation number: ČIA 2365
Calibration items in scope: 2
Types of calibrated items: 2
Calibration principles used: 2
City: Brno, Czech Republic
Valid until: 18-12-2029

Accreditation number: 2365
Accreditation body: ČIA
Address: Těžební 1238/2, Černovice, 627 00 Brno
City: Brno, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 18-12-2029

What this laboratory calibrates (2)

Angle of rotation / screwdriving systems — 1 calibration item
Screwdriving systems — 1 calibration item

Calibration principles (2)

Measurement using a rotation angle sensor — 1 calibration item
Measurement using a torque sensor — 1 calibration item

Certificate information

Certificate date: 18.12.2024

Accreditation scope — calibration items (2)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Angle of rotation / screwdriving systems	Calibration – plane angle 0° to 360° · CMC 0,20° CMC for the field of measured quantity: Plane angle	Measurement using a rotation angle sensor	DCWI 15633-002
2	Screwdriving systems	Calibration – torque 0,2 Nm to 2 Nm · CMC 0,01 Nm 2 Nm to 12 Nm · CMC 0,05 Nm 12 Nm to 30 Nm · CMC 0,1 Nm 30 Nm to 63 Nm · CMC 0,2 Nm 63 Nm to 160 Nm · CMC 0,6 Nm 160 Nm to 300 Nm · CMC 1,0 Nm 300 Nm to 500 Nm · CMC 2,0 Nm 500 Nm to 850 Nm · CMC 2,5 Nm 850 Nm to 1000 Nm · CMC 3,5 Nm CMC for the field of measured quantity: Torque	Measurement using a torque sensor	DCWI 15633-002

Reference standards (1)

DCWI 15633-002

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2365