Sign up
LabCoda / Accreditation scopes / 🇨🇿 Czech Republic / 2354

🇨🇿 HKMkalibra s.r.o. PL

ČIA 2354 • Pardubice, Czech Republic • 18 calibration items

Metrology & calibration

HKMkalibra s.r.o. is a calibration laboratory accredited by ČIA under number 2354 (Pardubice, Czech Republic). Its accreditation scope covers 18 calibration items in the following areas: Metrology & calibration. Calibrated items include: Deformation pressure gauges, digital pressure gauges, pressure tran…, Dial indicators, Fixed angle measures - squares, Gauge blocks. Most frequently used calibration principles: Comparison with standard gauge blocks, Direct measurement with a universal length measuring machine, Comparison with an instrument for checking line measures.

At a glance

  • Accreditation number: ČIA 2354
  • Calibration items in scope: 18
  • Types of calibrated items: 18
  • Calibration principles used: 11
  • City: Pardubice, Czech Republic
  • Valid until: 07-10-2027
Accreditation number
2354
Accreditation body
ČIA
Address
Arnošta z Pardubic 2833, Zelené Předměstí, 530 02 Pardubice
City
Pardubice, Czech Republic
Division
Laboratorium HKMkalibra
Valid until
07-10-2027

What this laboratory calibrates (18)

Calibration principles (11)

Certificate information

Certificate date
07.10.2022

Accreditation scope — calibration items (18)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Slide gauges Calibration – length
scale division 0.001 mm — 0 mm to 1500 mm · CMC (12L +1,3) µm scale division 0.01 mm — 0 mm to 1500 mm · CMC (7L +12) µm scale division 0.02 mm — 0 mm to 1500 mm · CMC (6L +15) µm scale division 0.05 mm — 0 mm to 1500 mm · CMC (3L +29) µm scale division 0.1 mm — 0 mm to 1500 mm · CMC (2L +54) µm
CMC for the field of measured quantity: Length
 Comparison with standard gauge blocks 01-KP-09
2 Micrometers for external measurement Calibration – length
0 mm to 500 mm · CMC (11L +0,66) µm
CMC for the field of measured quantity: Length
 Comparison with standard gauge blocks 02-KP-09
3 Micrometers for internal measurement Calibration – length
0 mm to 500 mm · CMC (11L +0,68) µm
CMC for the field of measured quantity: Length
 Comparison with standard gauge blocks 03-KP-09
4 Dial indicators Calibration – length
0 mm to 100 mm · CMC (0,8L +0,26) µm
CMC for the field of measured quantity: Length
 Comparison with a universal length measuring machine 04-KP-09
5 Line measures - steel rules Calibration – length
0 mm to 2000 mm · CMC (1L +26) µm
CMC for the field of measured quantity: Length
 Comparison with an instrument for checking line measures 05-KP-09
6 Line measures - tape measures and measuring tapes Calibration – length
0 mm to 10000 mm · CMC (0,7L +64) µm
CMC for the field of measured quantity: Length
 Comparison with an instrument for checking line measures 05-KP-09
7 Gauges for internal measurement - plain, gap gauges, measuring wires Calibration – length
0,001 mm to 500 mm · CMC (2,3L +0,46) µm
CMC for the field of measured quantity: Length
 Direct measurement with a universal length measuring machine 06-KP-09
8 Gauges for internal measurement - thread Calibration – length
1 mm to 500 mm · CMC (2L +0,69) µm
CMC for the field of measured quantity: Length
 Indirect measurement with a universal length measuring machine 06-KP-09
9 Gauges for external measurement - plain Calibration – length
1 mm to 500 mm · CMC (1,4L +2,3) µm
CMC for the field of measured quantity: Length
 Direct measurement with a universal length measuring machine 07-KP-09
10 Gauges for external measurement - snap gauges Calibration – length
1 mm to 500 mm · CMC (1,4L +1,3) µm
CMC for the field of measured quantity: Length
 Direct measurement with a universal length measuring machine 07-KP-09
11 Gauges for external measurement - thread Calibration – length
5 mm to 500 mm · CMC (1,4L +2,6) µm
CMC for the field of measured quantity: Length
 Indirect measurement with a universal length measuring machine 07-KP-09
12 Gauge blocks Calibration – length
0,5 mm to 100 mm · CMC (1,4L +0,33) µm
CMC for the field of measured quantity: Length
 Comparison with standard gauge blocks 08-KP-09
13 Fixed angle measures - squares Calibration – length
0 mm to 1000 mm · CMC (11L +6,8) µm
CMC for the field of measured quantity: Length
 Comparison with standard gauge blocks and a check square 09-KP-09
14 Protractors - mechanical, digital, arc Calibration – plane angle
Accuracy: up to 10´ — 0° to 360° · CMC 2´ Accuracy: 0.1° — 0° to 360° · CMC 0,19°
CMC for the field of measured quantity: Plane angle
 Comparison with standard angle gauge blocks 10-KP-09
15 Spirit levels Calibration – plane angle
0,002 mm/m · CMC 8 µm/m
CMC for the field of measured quantity: Plane angle
 Direct measurement with a spirit level tester 09-KP-09
16 Torque wrenches, screwdrivers, torque measuring instruments Calibration – mechanical motion
0,2 N·m to 1000 N·m · CMC 0,011
CMC for the field of measured quantity: Mechanical motion
 Comparison with a standard torque transducer 18-KP-15
17 Deformation pressure gauges, digital pressure gauges, pressure transducers with digital display of the measured quantity, measuring chains with digital display of the measured quantity Calibration – pressure
liquids; gauge pressure — 0 kPa to 1000 kPa · CMC 2,2 kPa liquids; gauge pressure — 1000 kPa to 10000 kPa · CMC 2,9 kPa liquids; gauge pressure — 10000 kPa to 20000 kPa · CMC 5,4 kPa liquids; gauge pressure — 20000 kPa to 70000 kPa · CMC 29 kPa gases; negative/positive gauge pressure — -95 kPa to 2000 kPa · CMC 2,6 kPa gases; negative/positive gauge pressure — 2000 kPa to 10000 kPa · CMC 3,2 kPa
CMC for the field of measured quantity: Pressure
 Comparative measurement with a standard digital pressure gauge 17-KP-14
18 Indicating thermometers, temperature measuring chains Calibration – temperature
-50 °C to -30 °C · CMC 0,3 °C -30 °C to 140 °C · CMC 0,08 °C 140 °C to 600 °C · CMC 1,6 °C 600 °C to 1100 °C · CMC 1,7 °C
CMC for the field of measured quantity: Temperature
 Comparative measurement with a standard digital thermometer in a liquid micro-bath and a calibration furnace 16-KP-11

Reference standards (13)

01-KP-09
02-KP-09
03-KP-09
04-KP-09
05-KP-09
06-KP-09
07-KP-09
08-KP-09
09-KP-09
10-KP-09
16-KP-11
17-KP-14
18-KP-15

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2354