🇨🇿 Strojírny a stavby Třinec, a.s. PL

ČIA 2342 • Třinec, Czech Republic • 3 calibration items

Metrology & calibration

Strojírny a stavby Třinec, a.s. is a calibration laboratory accredited by ČIA under number 2342 (Třinec, Czech Republic). Its accreditation scope covers 3 calibration items in the following areas: Metrology & calibration. Calibrated items include: Feeler gauges, Outside micrometers, Slide gauges. Most frequently used calibration principles: Measurement using gauge blocks, Measurement using gauge blocks and setting rings, Measurement with an outside micrometer.

At a glance

Accreditation number: ČIA 2342
Calibration items in scope: 3
Types of calibrated items: 3
Calibration principles used: 3
City: Třinec, Czech Republic
Valid until: 12-06-2031

Accreditation number: 2342
Accreditation body: ČIA
Address: Průmyslová 1038, Staré Město, 739 61 Třinec
City: Třinec, Czech Republic
Division: KMS1 - ośrodek kontroli metrologicznej 1
Valid until: 12-06-2031

What this laboratory calibrates (3)

Feeler gauges — 1 calibration item
Outside micrometers — 1 calibration item
Slide gauges — 1 calibration item

Calibration principles (3)

Measurement using gauge blocks — 1 calibration item
Measurement using gauge blocks and setting rings — 1 calibration item
Measurement with an outside micrometer — 1 calibration item

Certificate information

Certificate date: 12.06.2026

Accreditation scope — calibration items (3)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Slide gauges	Calibration – length 0 mm to 500 mm · CMC 0,02 mm CMC for the field of measured quantity: Length	Measurement using gauge blocks and setting rings	PPo 80/01
2	Outside micrometers	Calibration – length 0 mm to 50 mm · CMC 0,002 mm 50 mm to 300 mm · CMC 0,003 mm 300 mm to 500 mm · CMC 0,005 mm CMC for the field of measured quantity: Length	Measurement using gauge blocks	PPo 81/01
3	Feeler gauges	Calibration – length 0,02 mm to 4 mm · CMC 0,003 mm CMC for the field of measured quantity: Length	Measurement with an outside micrometer	PPo 76/01

Reference standards (3)

PPo 76/01

PPo 80/01

PPo 81/01

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2342