🇨🇿 TM Technik s.r.o. PL

ČIA 2322 • Brno, Czech Republic • 23 calibration items

Metrology & calibration

TM Technik s.r.o. is a calibration laboratory accredited by ČIA under number 2322 (Brno, Czech Republic). Its accreditation scope covers 23 calibration items in the following areas: Metrology & calibration. Calibrated items include: Dial, lever and digital indicators, 90° angles (arm up to 600 mm), Air mass flow meters, Angle gauges. Most frequently used calibration principles: Measurement on a length gauge, Measurement with parallel gauge blocks, Measurement on a microscope.

At a glance

Accreditation number: ČIA 2322
Calibration items in scope: 23
Types of calibrated items: 22
Calibration principles used: 15
City: Brno, Czech Republic
Valid until: 12-05-2027

Accreditation number: 2322
Accreditation body: ČIA
Address: Kaštanová 530/125b, Brněnské Ivanovice, 620 00 Brno
City: Brno, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 12-05-2027

What this laboratory calibrates (22)

Dial, lever and digital indicators — 2 calibration items
90° angles (arm up to 600 mm) — 1 calibration item
Air mass flow meters — 1 calibration item
Angle gauges — 1 calibration item
Blade measuring rules and check rules — 1 calibration item
Digital pressure gauges, digital pressure gauges as a part of tightness gauges — 1 calibration item
Feeler gauges — 1 calibration item
Gauges, measuring jigs and special gauges — 1 calibration item
Height gauges — 1 calibration item
Internal gauge with dial indicator — 1 calibration item
Limit and end measuring rings - diameter — 1 calibration item
Measuring wires and cylindrical gauges - diameter — 1 calibration item
Micrometer gauges analogue and digital — 1 calibration item
Optical measuring systems — 1 calibration item
Parallel gauge blocks — 1 calibration item
and 7 more

Calibration principles (15)

Measurement on a length gauge — 6 calibration items
Measurement with parallel gauge blocks — 3 calibration items
Measurement on a microscope — 2 calibration items
Comparison with a standard line scale — 1 calibration item
Comparison with a standard pressure gauge — 1 calibration item
Comparison with parallel gauge blocks — 1 calibration item
Direct comparison with a standard flow meter — 1 calibration item
Measurement of angle gauges — 1 calibration item
Measurement on a 3D coordinate measuring machine — 1 calibration item
Measurement with a glass gauge — 1 calibration item
Measurement with a standard comb gauge or parallel gauge blocks — 1 calibration item
Measurement with a standard height gauge — 1 calibration item
Measurement with a standard torque sensor — 1 calibration item
Measurement with measuring rings — 1 calibration item
Measurements on special measuring equipment — 1 calibration item

Certificate information

Certificate date: 12.05.2022

Accreditation scope — calibration items (23)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Slide gauges analogue and digital	Calibration – length 0 mm to 1000 mm · CMC (9·L + 10) µm CMC for the field of measured quantity: Length	Measurement with parallel gauge blocks	KP-001
2	Micrometer gauges analogue and digital	Calibration – length 0 mm to 1000 mm · CMC (6,4·L + 1,3) µm CMC for the field of measured quantity: Length	Measurement with parallel gauge blocks	KP-002
3	Dial, lever and digital indicators	Calibration – length 0 mm to 25 mm · CMC 0,5 µm CMC for the field of measured quantity: Length	Measurements on special measuring equipment	KP-003
4	Dial, lever and digital indicators	Calibration – length 0 mm to 100 mm · CMC (4,1·L + 1,2) µm CMC for the field of measured quantity: Length	Measurement on a length gauge	KP-003
5	Pasameters	Calibration – length 0 mm to 300 mm · CMC (4,8·L + 2,2) µm CMC for the field of measured quantity: Length	Measurement with parallel gauge blocks	KP-004
6	Limit and end measuring rings - diameter	Calibration – length 0,5 mm to 300 mm · CMC (5,4·L + 0,8) µm CMC for the field of measured quantity: Length	Measurement on a length gauge	KP-005
7	Feeler gauges	Calibration – length 0,02 mm to 5 mm · CMC 0,5 µm CMC for the field of measured quantity: Length	Measurement on a length gauge	KP-006
8	Parallel gauge blocks	Calibration – length 4th order — 0,5 mm to 100 mm · CMC (2·L + 0,2) µm 5th order — 0,5 mm to 100 mm · CMC (5·L + 0,5) µm CMC for the field of measured quantity: Length	Comparison with parallel gauge blocks	KP-007
9	Plain gauges for holes and shafts - diameter	Calibration – length 0 mm to 300 mm · CMC (5,8·L + 0,7) µm CMC for the field of measured quantity: Length	Measurement on a length gauge	KP-008
10	Measuring wires and cylindrical gauges - diameter	Calibration – length 0 mm to 20 mm · CMC (5,1·L + 0,7) µm CMC for the field of measured quantity: Length	Measurement on a length gauge	KP-009
11	Blade measuring rules and check rules	Calibration – length 0 mm to 500 mm · CMC (3,8·L + 1,2) µm CMC for the field of measured quantity: Length	Measurement on a microscope	KP-011
12	Internal gauge with dial indicator	Calibration – length 1 mm to 400 mm · CMC (11·L + 1,2) µm CMC for the field of measured quantity: Length	Measurement with measuring rings	KP-014
13	Tape measures	Calibration – length 0 m to 10 m · CMC (2·L + 110) µm CMC for the field of measured quantity: Length	Comparison with a standard line scale	KP-015
14	Steel rules	Calibration – length 0 mm to 1000 mm · CMC (4,9·L + 22) µm CMC for the field of measured quantity: Length	Measurement on a microscope	KP-016
15	Thread gauges (male and female)	Calibration – length 0 mm to 500 mm · CMC (1,3·L + 0,7) µm CMC for the field of measured quantity: Length	Measurement on a length gauge	KP-017
16	Optical measuring systems	Calibration – length 0 mm to 600 mm · CMC (1·L + 2,6) µm CMC for the field of measured quantity: Length	Measurement with a glass gauge	KP-028
17	Gauges, measuring jigs and special gauges	Calibration – length 0 mm to 300 mm · CMC (1·L + 2) µm CMC for the field of measured quantity: Length	Measurement on a 3D coordinate measuring machine	KP-030
18	Height gauges	Calibration – length 0 mm to 1000 mm · CMC (1,1·L + 2,6) µm CMC for the field of measured quantity: Length	Measurement with a standard comb gauge or parallel gauge blocks	KP-031
19	90° angles (arm up to 600 mm)	Calibration – length 0 mm to 12 mm · CMC 0,006 mm CMC for the field of measured quantity: Length	Measurement with a standard height gauge	KP-012
20	Angle gauges	Calibration – plane angle 0° to 360° · CMC 5' 46'' CMC for the field of measured quantity: Plane angle	Measurement of angle gauges	KP-010
21	Air mass flow meters	Calibration – flow 0 l/min to 0,5 l/min · CMC 0,04 l/min 0,5 l/min to 5 l/min · CMC 0,05 l/min 5 l/min to 50 l/min · CMC 0,45 l/min CMC for the field of measured quantity: Flow	Direct comparison with a standard flow meter	KP-033
22	Torque wrenches and screwdrivers	Calibration – torque 0,2 Nm to 1100 Nm · CMC 0,5 % CMC for the field of measured quantity: Torque	Measurement with a standard torque sensor	KP-025
23	Digital pressure gauges, digital pressure gauges as a part of tightness gauges	Calibration – pressure air gauge pressure — -100 kPa to 2000 kPa · CMC 0,03 % + 0,3 kPa air gauge pressure — 0 kPa to 10 kPa · CMC 0,03 % + 3 Pa CMC for the field of measured quantity: Pressure	Comparison with a standard pressure gauge	KP-032

Reference standards (22)

KP-001

KP-002

KP-003

KP-004

KP-005

KP-006

KP-007

KP-008

KP-009

KP-010

KP-011

KP-012

KP-014

KP-015

KP-016

KP-017

KP-025

KP-028

KP-030

KP-031

KP-032

KP-033

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2322