🇨🇿 Amest s.r.o. PL

ČIA 2314 • Jesenice, Czech Republic • 1 calibration items

Metrology & calibration

Amest s.r.o. is a calibration laboratory accredited by ČIA under number 2314 (Jesenice, Czech Republic). Its accreditation scope covers 1 calibration item in the following areas: Metrology & calibration. Calibrated items include: Inductive length sensors. Most frequently used calibration principles: Comparison by means of standard gauge blocks.

At a glance

Accreditation number: ČIA 2314
Calibration items in scope: 1
Types of calibrated items: 1
Calibration principles used: 1
City: Jesenice, Czech Republic
Valid until: 05-05-2031

Accreditation number: 2314
Accreditation body: ČIA
Address: Belnická 736, 252 42 Jesenice
City: Jesenice, Czech Republic
Division: Amest - laboratorium wzorcujące
Valid until: 05-05-2031

What this laboratory calibrates (1)

Inductive length sensors — 1 calibration item

Calibration principles (1)

Comparison by means of standard gauge blocks — 1 calibration item

Certificate information

Certificate date: 05.05.2026

Accreditation scope — calibration items (1)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Inductive length sensors	Calibration – length 0 mm to 10 mm · CMC 1 µm CMC for the field of measured quantity: Length	Comparison by means of standard gauge blocks	KP 001

Reference standards (1)

KP 001

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2314