🇨🇿 KAVON CZ s.r.o. PL

ČIA 2293 • Chrudim, Czech Republic • 3 calibration items

Metrology & calibration

KAVON CZ s.r.o. is a calibration laboratory accredited by ČIA under number 2293 (Chrudim, Czech Republic). Its accreditation scope covers 3 calibration items in the following areas: Metrology & calibration. Calibrated items include: Angle of rotation / Torque wrenches, Assembly tightening tools - nutrunners, Torque wrenches and screwdrivers. Most frequently used calibration principles: Measurement using a torque transducer, Measurement using a torque transducer (ČSN EN ISO 6789-2), Measurement using an angle sensor (VDI/VDE 2648-1).

At a glance

Accreditation number: ČIA 2293
Calibration items in scope: 3
Types of calibrated items: 3
Calibration principles used: 3
City: Chrudim, Czech Republic
Valid until: 18-10-2028

Accreditation number: 2293
Accreditation body: ČIA
Address: Medlešice 139, 538 31 Chrudim
City: Chrudim, Czech Republic
Division: laboratorium wzorcujące
Valid until: 18-10-2028

What this laboratory calibrates (3)

Angle of rotation / Torque wrenches — 1 calibration item
Assembly tightening tools - nutrunners — 1 calibration item
Torque wrenches and screwdrivers — 1 calibration item

Calibration principles (3)

Measurement using a torque transducer — 1 calibration item
Measurement using a torque transducer (ČSN EN ISO 6789-2) — 1 calibration item
Measurement using an angle sensor (VDI/VDE 2648-1) — 1 calibration item

Certificate information

Certificate date: 18.10.2023

Accreditation scope — calibration items (3)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Angle of rotation / Torque wrenches	Calibration – plane angle 0° to 90° · CMC 0,5° CMC for the field of measured quantity: Plane angle	Measurement using an angle sensor (VDI/VDE 2648-1)	KL-006-22
2	Torque wrenches and screwdrivers	Calibration – torque 0,1 Nm to 3000 Nm · CMC 0,5 % CMC for the field of measured quantity: Torque	Measurement using a torque transducer (ČSN EN ISO 6789-2)	KL-001-18
3	Assembly tightening tools - nutrunners	Calibration – torque 0,1 Nm to 5000 Nm · CMC 0,7 % CMC for the field of measured quantity: Torque	Measurement using a torque transducer	KL-004-17

Reference standards (3)

KL-001-18

KL-004-17

KL-006-22

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2293