🇨🇿 TECHNICKÉ LABORATOŘE OPAVA, akciová společnost PL

ČIA 2277 • Opava, Czech Republic • 121 calibration items

Metrology & calibration

TECHNICKÉ LABORATOŘE OPAVA, akciová společnost is a calibration laboratory accredited by ČIA under number 2277 (Opava, Czech Republic). Its accreditation scope covers 121 calibration items in the following areas: Metrology & calibration. Calibrated items include: Comparators, Check squares 90°, Steel tape measures, Angle gauges. Most frequently used calibration principles: Direct measurement with standard parallel gauge blocks, Direct measurement by a distance meter, Direct measurement on a profile projector.

At a glance

Accreditation number: ČIA 2277
Calibration items in scope: 121
Types of calibrated items: 115
Calibration principles used: 29
City: Opava, Czech Republic
Valid until: 04-07-2027

Accreditation number: 2277
Accreditation body: ČIA
Address: Těšínská 2962/79b, Předměstí, 746 01 Opava
City: Opava, Czech Republic
Division: Laboratorium wzorcujące wielkości geometrycznych
Valid until: 04-07-2027

What this laboratory calibrates (115)

Comparators — 4 calibration items
Check squares 90° — 3 calibration items
Steel tape measures — 2 calibration items
Angle gauges — 1 calibration item
Angle gauges with a dial indicator — 1 calibration item
Angle gauges with a digital scale — 1 calibration item
Angle sine bars — 1 calibration item
Blade measuring rules — 1 calibration item
Check and drawing blocks — 1 calibration item
Check rules — 1 calibration item
Checking instruments for dial indicators — 1 calibration item
Clinometers — 1 calibration item
Cross sine bars — 1 calibration item
Cylindrical gauges — 1 calibration item
Cylindrical plug gauges for checks and drawing — 1 calibration item
and 100 more

Calibration principles (29)

Direct measurement with standard parallel gauge blocks — 29 calibration items
Direct measurement by a distance meter — 24 calibration items
Direct measurement on a profile projector — 10 calibration items
Direct measurement on a 3D machine — 8 calibration items
Measurement by a laser interferometer — 8 calibration items
Measurement with standard parallel gauge blocks — 7 calibration items
Measurement by a special measuring device — 5 calibration items
Comparison with an angle standard — 4 calibration items
Direct measurement with a linear scale of a steel ruler — 4 calibration items
Comparison with standard parallel gauge blocks and sine rule — 2 calibration items
Direct measurement with measuring rings — 2 calibration items
By parallel gauge blocks on a surface plate — 1 calibration item
Comparison with a comparison pin gauge — 1 calibration item
Comparison with standard parallel gauge blocks — 1 calibration item
Direct measurement by a roughness meter — 1 calibration item
and 14 more

Certificate information

Certificate date: 16.02.2026

Accreditation scope — calibration items (121)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Standard scale	Calibration – length 0 mm to 1000 mm · CMC (2·L +0,7) µm CMC for the field of measured quantity: Length	Measurement on a multi-sensor machine Werth Video-Check-HA	KP 1.1
2	Parallel gauge blocks	Calibration – length 0,5 mm to 1000 mm · CMC (0,8·L +0,08) µm CMC for the field of measured quantity: Length	Comparison with standard parallel gauge blocks	KP 1.2
3	Glass gauges for the check of surface flatness and parallelity	Calibration – length 0 mm to 100 mm · CMC 0,2 µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 1.3
4	Holder of basic gauges and accessories	Calibration – length 0 mm to 1500 mm · CMC 0,25 µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 1.4
5	Slide gauges	Calibration – length 0 mm to 3000 mm · CMC (20·L +20) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.1
6	Slide gauges with circular dial indicator and depth indicator	Calibration – length 0 mm to 1000 mm · CMC (30·L +30) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.2
7	Sliding depth gauges	Calibration – length 0 mm to 3000 mm · CMC (20·L +20) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.3
8	Slide height gauges	Calibration – length 0 mm to 1000 mm · CMC (20·L +20) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.4
9	Depth gauges with dial indicator	Calibration – length 0 mm to 1000 mm · CMC (30·L +30) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.5
10	Slide height gauges with a digital scale	Calibration – length 0 mm to 1000 mm · CMC (20·L +20) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.6
11	Slide depth gauges with a digital scale	Calibration – length 0 mm to 3000 mm · CMC (20·L +20) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.7
12	Slide gauges with a digital scale	Calibration – length 0 mm to 3000 mm · CMC (20·L +20) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.8
13	Standard height gauges with a micrometer screw	Calibration – length 0 mm to 1000 mm · CMC (5·L +2) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.9
14	Micrometer callipers for external measurement with fixed anvils	Calibration – length 0 mm to 3000 mm · CMC (10·L +1,7) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.10
15	Comparators	Calibration – length 0 mm to 1000 mm · CMC (1,2·L +0,3) µm 1000 mm to 3000 mm · CMC (3·L +2) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 2.10
16	Micrometers with planar interchangeable measuring anvils	Calibration – length 0 mm to 3000 mm · CMC (14·L +2,5) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.11
17	Comparators	Calibration – length 0 mm to 1000 mm · CMC (1,2·L +0,3) µm 1000 mm to 3000 mm · CMC (3·L +2) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 2.11
18	Gear micrometers	Calibration – length 0 mm to 300 mm · CMC (10·L +2) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.12
19	Comparators	Calibration – length 0 mm to 1000 mm · CMC (1,2·L +0,3) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 2.12
20	Micrometers for sheet metal	Calibration – length 0 mm to 100 mm · CMC (20·L +3) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.13
21	Micrometer calliper gauges with extended anvils	Calibration – length 0 mm to 100 mm · CMC (10·L +2) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.14
22	Micrometers for wires	Calibration – length 0 mm to 20 mm · CMC (10·L +1,7) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.15
23	Micrometers for tube walls	Calibration – length 0 mm to 100 mm · CMC (10·L +2,2) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.16
24	Micrometers for threads with interchangeable anvils	Calibration – length 0 mm to 300 mm · CMC (10·L +2) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.17
25	Comparators	Calibration – length 0 mm to 500 mm · CMC (4·L +1,5) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 2.17
26	Inside micrometer gauges	Calibration – length 3 mm to 1000 mm · CMC (12·L +3) µm CMC for the field of measured quantity: Length	Direct measurement with standard rings	KP 2.18
27	Micrometers for products with a concave surface	Calibration – length 0 mm to 100 mm · CMC (10·L +2) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.19
28	Micrometers with shape measuring anvils	Calibration – length 0 mm to 3000 mm · CMC (10·L +2) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.20
29	Micrometers with prismatic measuring anvils	Calibration – length 0 mm to 200 mm · CMC (10·L +2,2) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.21
30	Micrometers with a digital scale	Calibration – length 0 mm to 3000 mm · CMC (8·L +1) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.22
31	Micrometer depth gauges	Calibration – length 0 mm to 200 mm · CMC (10·L +1,5) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.23
32	Micrometric heads	Calibration – length 0 mm to 100 mm · CMC (8·L +1,5) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 2.24
33	Rigid inside micrometer gauges	Calibration – length 0 mm to 3000 mm · CMC (4·L +2) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 2.25
34	Folding inside micrometer gauges with extension pieces	Calibration – length 0 mm to 1000 mm · CMC (1,5·L +0,3) µm 1000 mm to 3000 mm · CMC (4·L +2) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 2.26
35	Micrometer heads with a digital scale	Calibration – length 0 mm to 100 mm · CMC (2·L +1,5) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 2.27
36	Pasameters and micropasameters	Calibration – length 0 mm to 300 mm · CMC (4·L +0,4) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.28
37	Lever gauges (callipers) for sheet metal and walls with dial indicator	Calibration – length 0 mm to 100 mm · CMC (15·L +1,5) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 2.29
38	Two-contact internal dial gauges	Calibration – length DS = 1 µm — 0 mm to 1000 mm · CMC (8·L +1,5) µm DS = 10 µm — 0 mm to 1000 mm · CMC (10·L +2,5) µm CMC for the field of measured quantity: Length	Direct measurement by a special measuring device	KP 2.30
39	Multipoint and special internal gauges	Calibration – length DS = 1 µm — 3 mm to 500 mm · CMC (6·L +2) µm DS = 10 µm — 3 mm to 500 mm · CMC (7·L +2,5) µm CMC for the field of measured quantity: Length	Direct measurement with measuring rings	KP 2.31
40	Internal gauges with a digital scale	Calibration – length 0 mm to 1000 mm · CMC (6·L +2) µm CMC for the field of measured quantity: Length	Direct measurement with measuring rings	KP 2.32
41	Dial indicators with division 0.01 mm	Calibration – length 0 mm to 100 mm · CMC (40·L +2) µm CMC for the field of measured quantity: Length	Measurement by a special measuring device	KP 3.1
42	Dial indicators with division 0.001 mm	Calibration – length 0 mm to 100 mm · CMC (10·L +0,5) µm CMC for the field of measured quantity: Length	Measurement by a special measuring device	KP 3.2
43	Somcators (microcators), mycators, minimeters, milisoms, orthotests, with division from 0.1 µm	Calibration – length 0 mm to 1 mm · CMC (5·L +0,1) µm CMC for the field of measured quantity: Length	Direct measurement with parallel gauge blocks	KP 3.3
44	Lever dial indicators with division 0.01 mm	Calibration – length 0 mm to 10 mm · CMC (50·L +3) µm CMC for the field of measured quantity: Length	Measurement by a special measuring device	KP 3.4
45	Lever dial indicators with division from 0.001 mm	Calibration – length 0 mm to 10 mm · CMC (80·L +0,35) µm CMC for the field of measured quantity: Length	Measurement by a special measuring device	KP 3.5
46	Dial indicators with a digital scale	Calibration – length 0 mm to 100 mm · CMC (6·L +1,2) µm CMC for the field of measured quantity: Length	Measurement by a special measuring device	KP 3.6
47	Cylindrical gauges	Calibration – length 0 mm to 1000 mm · CMC (2,5·L +0,2) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.1
48	Slot gauges	Calibration – length 0 mm to 3000 mm · CMC (2,5·L +0,2) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.2
49	Inside micrometers with spherical surfaces	Calibration – length 0 mm to 3000 mm · CMC (1,5·L +0,15) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.3
50	Single- and double-ended snap gauges	Calibration – length 0,5 mm to 10 mm · CMC 0,5 µm 10 mm to 500 mm · CMC (4·L +0,3) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.4
51	Measuring rings	Calibration – length 0,3 mm to 2 mm · CMC 1,1 µm 2 mm to 1000 mm · CMC (6·L +0,6) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.6
52	Cylindrical plug gauges for checks and drawing	Calibration – length 0 mm to 300 mm · CMC (4·L +0,4) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.7
53	Thread gauges and comparison pin gauges for metric threads	Calibration – length 0 mm to 300 mm · CMC (7·L +2) µm CMC for the field of measured quantity: Length	Direct measurement on a length gauge	KP 4.9
54	Good fixed and faulty fixed thread rings for metric threads	Calibration – length 1 mm to 3 mm · CMC 7 µm 3 mm to 300 mm · CMC (10·L +3) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.10
55	Thread gauges for pipe threads not fitting to threads – male gauge	Calibration – length 0 mm to 300 mm · CMC (10·L +2,2) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.11
56	Thread gauges for pipe threads not fitting to threads – ring	Calibration – length 3 mm to 300 mm · CMC (10·L +3) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.11
57	Limit thread snap gauges – male gauge	Calibration – length 0 mm to 300 mm · CMC (10·L +2) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.12
58	Limit thread snap gauges – ring	Calibration – length 3 mm to 300 mm · CMC (20·L +10) µm CMC for the field of measured quantity: Length	Comparison with a comparison pin gauge	KP 4.12
59	Thread gauges for other threads – male gauge	Calibration – length 0 mm to 300 mm · CMC (10·L +2) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.13
60	Thread gauges for other threads – ring	Calibration – length 1 mm to 3 mm · CMC 7 µm 3 mm to 300 mm · CMC (10·L +3) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.13
61	Thread-measuring wires	Calibration – length 0 mm to 10 mm · CMC (5·L +0,15) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 4.14
62	Feeler gauges for radius	Calibration – length 0 mm to 100 mm · CMC (10·L +3) µm CMC for the field of measured quantity: Length	Direct measurement on a profile projector	KP 5.1
63	Feeler gauges	Calibration – length 0 mm to 100 mm · CMC (2,5·L +0,7) µm CMC for the field of measured quantity: Length	Direct measurement by a distance meter	KP 5.2
64	Thread gauges for metric threads	Calibration – length 0 mm to 10 mm · CMC 3 µm CMC for the field of measured quantity: Length	Direct measurement on a profile projector	KP 5.3
65	Thread gauges for Whitworth and tube thread	Calibration – length 0 mm to 10 mm · CMC 3 µm CMC for the field of measured quantity: Length	Direct measurement on a profile projector	KP 5.4
66	Gauges for the measurement of fillet welds	Calibration – length 0 mm to 100 mm · CMC 40 µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 5.5
67	Gauges for thread tools for metric and Whitworth thread	Calibration – length 0 mm to 20 mm · CMC 5 µm CMC for the field of measured quantity: Length	Direct measurement on a profile projector	KP 5.10
68	Gauges for flat and sharp thread tools	Calibration – length 0 mm to 100 mm · CMC 5 µm CMC for the field of measured quantity: Length	Direct measurement on a profile projector	KP 5.11
69	Layer thickness measuring gauges	Calibration – length 0 mm to 10 mm · CMC (20·L +3) µm CMC for the field of measured quantity: Length	Direct measurement with standard setting sheets	KP 5.12
70	External and internal gauges for radius	Calibration – length 0 mm to 500 mm · CMC (10·L +4) µm CMC for the field of measured quantity: Length	Direct measurement on a profile projector	KP 5.13
71	Steel tape measures	Calibration – length 0 mm to 2000 mm · CMC 100 µm CMC for the field of measured quantity: Length	Direct measurement with a linear scale of a steel ruler	KP 6.1
72	Steel tape measures	Calibration – length 0 mm to 10000 mm · CMC (10·L +100) µm CMC for the field of measured quantity: Length	Direct measurement with a linear scale of a steel ruler	KP 6.2
73	Steel length gauges	Calibration – length 0 mm to 5000 mm · CMC (20·L +10) µm CMC for the field of measured quantity: Length	Direct measurement with a linear scale of a steel ruler	KP 6.3
74	Tape measures	Calibration – length 0 m to 20 m · CMC (15·L +100) µm 20 m to 100 m · CMC (40·L +200) µm distance meters — 0 m to 20 m · CMC (60·L +500) µm CMC for the field of measured quantity: Length	Direct measurement with a linear scale of a steel ruler	KP 6.4
75	Flatness / surface plates; straightness / ribbed surface rules, surface blocks, cast-iron ribbed rules	Calibration – length length up to 5,000 mm — 0 µm to 500 µm · CMC 1,5 µm CMC for the field of measured quantity: Length	Measurement by a laser interferometer	KP 7.1
76	Check and drawing blocks	Calibration – length 0 mm to 500 mm · CMC (6·L +2) µm CMC for the field of measured quantity: Length	Direct measurement on a 3D machine	KP 7.21
77	Point instruments	Calibration – length 0 mm to 1200 mm · CMC (2·L +3) µm CMC for the field of measured quantity: Length	Measurement using male gauges and a dial indicator	KP 7.22
78	Flatness / measuring tables for comparative measurement	Calibration – length 0 mm to 1000 mm · CMC 0,8 µm CMC for the field of measured quantity: Length	Direct measurement on a 3D machine	KP 7.23
79	Sliding mechanical gear tooth calipers	Calibration – length 0 mm to 200 mm · CMC 20 µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 8.1
80	Optical gear tooth calipers	Calibration – length 0 mm to 100 mm · CMC 15 µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 8.2
81	Surface roughness standards	Calibration – length 0 mm to 12,5 µm · CMC 6 % CMC for the field of measured quantity: Length	Direct measurement by a roughness meter	KP 8.3
82	Universal length meters	Calibration – length 0 mm to 6000 mm · CMC (1·L +0,15) µm CMC for the field of measured quantity: Length	Measurement by a laser interferometer	KP 8.4
83	Universal measuring microscopes	Calibration – length 0 mm to 3000 mm · CMC (1·L +0,15) µm CMC for the field of measured quantity: Length	Measurement by a laser interferometer	KP 8.5
84	Profile projectors	Calibration – length 0 mm to 3000 mm · CMC (1·L +0,15) µm CMC for the field of measured quantity: Length	Measurement by a laser interferometer	KP 8.6
85	One- to three-axis coordinate measuring machines	Calibration – length 0 mm to 6000 mm · CMC (1,3·L +0,15) µm CMC for the field of measured quantity: Length	Measurement by a laser interferometer	KP 8.7
86	Three-axis coordinate measuring machines	Calibration – length 0 mm to 6000 mm · CMC (1,3·L +0,15) µm CMC for the field of measured quantity: Length	Measurement by a laser interferometer	KP 8.8
87	Checking instruments for dial indicators	Calibration – length 0 mm to 100 mm · CMC (0,5·L +0,06) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 8.9
88	Instruments for checking of gauge blocks by comparative method	Calibration – length 0 mm to 200 mm · CMC (0,5·L +0,06) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks	KP 8.10
89	Roughness meters	Calibration – length 0 mm to 100 µm · CMC 8 % CMC for the field of measured quantity: Length	Direct measurement with a roughness standard	KP 8.11
90	Length gauges	Calibration – length 1 axis — 0 mm to 3000 mm · CMC (3·L +0,5) µm 2 axes — 0 mm to 1000 mm · CMC (3·L +0,7) µm 3 axes — 0 mm to 1000 mm · CMC (3·L +0,1) µm CMC for the field of measured quantity: Length	Special measurement on 1, 2 and 3-axis measuring machines	KP 8.12
91	Check rules	Calibration – length length up to 5,000 mm — 0 µm to 50 µm · CMC (1,8·L +1,2) µm CMC for the field of measured quantity: Length	Measurement by a laser interferometer	KP 7.2
92	Shop rules	Calibration – length length up to 5,000 mm — 0 µm to 50 µm · CMC (1,8·L +1,5) µm CMC for the field of measured quantity: Length	Measurement by a laser interferometer	KP 7.3
93	Blade measuring rules	Calibration – length length up to 5,000 mm — 0 µm to 30 µm · CMC 3 µm CMC for the field of measured quantity: Length	By parallel gauge blocks on a surface plate	KP 7.4
94	Squareness measuring cylinders	Calibration – length height up to 1,000 mm — 0 mm to 5 mm · CMC (2,5·L +0,5) µm CMC for the field of measured quantity: Length	Measurement using a pasameter, length gauge and dial indicator	KP 7.14
95	Check squares 90°	Calibration – length length up to 200 mm — 0 mm to 4 mm · CMC (4·L +1) µm CMC for the field of measured quantity: Length	Direct measurement with standard parallel gauge blocks and perpendicularity standard	KP 7.15
96	Check squares 90°	Calibration – length length up to 1,000 mm — 0 mm to 4 mm · CMC (5·L +2) µm CMC for the field of measured quantity: Length	Direct measurement on a 3D machine	KP 7.15
97	Check squares 90°	Calibration – length length up to 2,500 mm — 0 mm to 8 mm · CMC (30·L +10) µm CMC for the field of measured quantity: Length	Direct measurement on a 3D machine	KP 7.16
98	Gauges for cone-face joints – male gauge	Calibration – plane angle diameter up to 300 mm — 0° to 50° · CMC 9“ CMC for the field of measured quantity: Plane angle	Direct measurement on a 3D machine	KP 4.5
99	Gauges for cone-face joints – ring	Calibration – plane angle diameter up to 300 mm — 0° to 50° · CMC 13“ CMC for the field of measured quantity: Plane angle	Direct measurement on a 3D machine	KP 4.5
100	Gauges for checking straight groove joints - male gauge	Calibration – plane angle diameter up to 200 mm — 0° to 60° · CMC 9“ CMC for the field of measured quantity: Plane angle	Direct measurement on a 3D machine	KP 4.8
101	Gauges for checking straight groove joints - ring	Calibration – plane angle diameter 3 mm to 200 mm — 0° to 60° · CMC 13“ CMC for the field of measured quantity: Plane angle	Direct measurement on a 3D machine	KP 4.8
102	Meter for checking screw augers	Calibration – plane angle diameter up to 100 mm — 0° to 120° · CMC 9´ CMC for the field of measured quantity: Plane angle	Direct measurement on a profile projector	KP 5.6
103	Meters for checking the angle of face of circular thread tools	Calibration – plane angle -30° to +30° · CMC 9´ CMC for the field of measured quantity: Plane angle	Direct measurement on a profile projector	KP 5.7
104	Gauges for the measurement of angle of turning tools with sintered carbide cutting edges	Calibration – plane angle 0° to 180° · CMC 4‘ CMC for the field of measured quantity: Plane angle	Direct measurement on a profile projector	KP 5.8
105	Gauges for angles of backs of cylindrical cutters	Calibration – plane angle 0° to 180° · CMC 5‘ CMC for the field of measured quantity: Plane angle	Direct measurement on a profile projector	KP 5.9
106	Sine bars	Calibration – plane angle length up to 1,000 mm — 0° to 50° · CMC 2,2“ CMC for the field of measured quantity: Plane angle	Measurement with standard parallel gauge blocks	KP 7.5
107	Sine bars with centres	Calibration – plane angle length up to 1,000 mm — 0° to 50° · CMC 2,1“ CMC for the field of measured quantity: Plane angle	Measurement with standard parallel gauge blocks	KP 7.6
108	Sine bars for checking cones	Calibration – plane angle length up to 500 mm — 0° to 50° · CMC 4“ CMC for the field of measured quantity: Plane angle	Measurement with standard parallel gauge blocks	KP 7.7
109	Angle sine bars	Calibration – plane angle length up to 200 mm — 0° to 50° · CMC 4“ CMC for the field of measured quantity: Plane angle	Measurement with standard parallel gauge blocks	KP 7.8
110	Cross sine bars	Calibration – plane angle length up to 200 mm — 0° to 50° · CMC 4“ CMC for the field of measured quantity: Plane angle	Measurement with standard parallel gauge blocks	KP 7.9
111	Folding sine bars with a stop	Calibration – plane angle length up to 200 mm — 0° to 50° · CMC 4“ CMC for the field of measured quantity: Plane angle	Measurement with standard parallel gauge blocks	KP 7.10
112	Sine vices	Calibration – plane angle length up to 200 mm — 0° to 50° · CMC 5“ CMC for the field of measured quantity: Plane angle	Measurement with standard parallel gauge blocks	KP 7.11
113	Levels	Calibration – plane angle -20 mm/m to +20 mm/m · CMC 3 µm/m CMC for the field of measured quantity: Plane angle	Comparison with standard parallel gauge blocks and sine rule	KP 7.12
114	Clinometers	Calibration – plane angle 0° to 360° · CMC 1‘ CMC for the field of measured quantity: Plane angle	Comparison with standard parallel gauge blocks and sine rule	KP 7.13
115	Mechanical angle gauges with vernier	Calibration – plane angle 0° to 360° · CMC 6‘ CMC for the field of measured quantity: Plane angle	Comparison with an angle standard	KP 7.17
116	Optical angle gauges	Calibration – plane angle 0° to 360° · CMC 3‘ CMC for the field of measured quantity: Plane angle	Comparison with an angle standard	KP 7.18
117	Angle gauges with a digital scale	Calibration – plane angle 0° to 360° · CMC 1‘10“ CMC for the field of measured quantity: Plane angle	Comparison with an angle standard	KP 7.19
118	Angle gauges with a dial indicator	Calibration – plane angle 0° to 360° · CMC 3‘ CMC for the field of measured quantity: Plane angle	Comparison with an angle standard	KP 7.20
119	Angle gauges	Calibration – plane angle 0° to 100° · CMC 7“ CMC for the field of measured quantity: Plane angle	Direct measurement on 3D machines	KP 7.24
120	Special gauges on 2-axis and 3-axis measuring machines	Calibration – plane angle length up to 1,000 mm — 0° to 360° · CMC 9“ CMC for the field of measured quantity: Plane angle	Measured on 2D and 3D machines	KP 8.12
121	Torque / Torque wrenches and screwdrivers	Calibration – torque 0,2 Nm to 2000 Nm · CMC 0,25 % CMC for the field of measured quantity: Torque	Direct measurement on torque calibration instruments	KP 9.1

Reference standards (110)

KP 1.1

KP 1.2

KP 1.3

KP 1.4

KP 2.1

KP 2.10

KP 2.11

KP 2.12

KP 2.13

KP 2.14

KP 2.15

KP 2.16

KP 2.17

KP 2.18

KP 2.19

KP 2.2

KP 2.20

KP 2.21

KP 2.22

KP 2.23

KP 2.24

KP 2.25

KP 2.26

KP 2.27

KP 2.28

KP 2.29

KP 2.3

KP 2.30

KP 2.31

KP 2.32

KP 2.4

KP 2.5

KP 2.6

KP 2.7

KP 2.8

KP 2.9

KP 3.1

KP 3.2

KP 3.3

KP 3.4

KP 3.5

KP 3.6

KP 4.1

KP 4.10

KP 4.11

KP 4.12

KP 4.13

KP 4.14

KP 4.2

KP 4.3

KP 4.4

KP 4.5

KP 4.6

KP 4.7

KP 4.8

KP 4.9

KP 5.1

KP 5.10

KP 5.11

KP 5.12

KP 5.13

KP 5.2

KP 5.3

KP 5.4

KP 5.5

KP 5.6

KP 5.7

KP 5.8

KP 5.9

KP 6.1

KP 6.2

KP 6.3

KP 6.4

KP 7.1

KP 7.10

KP 7.11

KP 7.12

KP 7.13

KP 7.14

KP 7.15

KP 7.16

KP 7.17

KP 7.18

KP 7.19

KP 7.2

KP 7.20

KP 7.21

KP 7.22

KP 7.23

KP 7.24

KP 7.3

KP 7.4

KP 7.5

KP 7.6

KP 7.7

KP 7.8

KP 7.9

KP 8.1

KP 8.10

KP 8.11

KP 8.12

KP 8.2

KP 8.3

KP 8.4

KP 8.5

KP 8.6

KP 8.7

KP 8.8

KP 8.9

KP 9.1

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2277