🇨🇿 Technický a zkušební ústav stavební Praha, s.p. PL

ČIA 2275 • Praha 9, Czech Republic • 11 calibration items

Metrology & calibration

Technický a zkušební ústav stavební Praha, s.p. is a calibration laboratory accredited by ČIA under number 2275 (Praha 9, Czech Republic). Its accreditation scope covers 11 calibration items in the following areas: Metrology & calibration. Calibrated items include: Flowmeters that can be calibrated with water, Force / tensile testing machines and presses, working force gauges, Deformation manometers, electromechanical manometers with a pressur…, Dial indicators. Most frequently used calibration principles: Measurement with parallel gauge blocks, Check impacts on a standard anvil, Comparison with a standard digital thermometer in the calibrated de….

At a glance

Accreditation number: ČIA 2275
Calibration items in scope: 11
Types of calibrated items: 9
Calibration principles used: 10
City: Praha 9, Czech Republic
Valid until: 25-03-2027

Accreditation number: 2275
Accreditation body: ČIA
Address: Prosecká 811/76a, Prosek, 190 00 Praha 9
City: Praha 9, Czech Republic
Division: Laboratorium wzorcujące TZÚS Praha, s.p. – oddział TIS
Valid until: 25-03-2027

What this laboratory calibrates (9)

Flowmeters that can be calibrated with water — 2 calibration items
Force / tensile testing machines and presses, working force gauges — 2 calibration items
Deformation manometers, electromechanical manometers with a pressure transducer or with digital indication — 1 calibration item
Dial indicators — 1 calibration item
Direct-indicating thermometers — 1 calibration item
Direct-indicating thermometers, thermometric devices — 1 calibration item
Electronic length sensors — 1 calibration item
Hardness / Schmidt type hardness testers (for concrete and other materials) — 1 calibration item
Slide gauges — 1 calibration item

Calibration principles (10)

Measurement with parallel gauge blocks — 2 calibration items
Check impacts on a standard anvil — 1 calibration item
Comparison with a standard digital thermometer in the calibrated device — 1 calibration item
Comparison with a standard force-proving instrument — 1 calibration item
Comparison with a standard piston manometer — 1 calibration item
Comparison with a standard Pt100 resistance temperature sensor in a water and oil bath — 1 calibration item
Loading with weights — 1 calibration item
Mass method — 1 calibration item
Measurement on a spiral microscope — 1 calibration item
Volume method — 1 calibration item

Laboratory sections (2)

Technický a zkušební ústav stavební Praha, s.p. – TIS Branch — 10 calibration items
Technický a zkušební ústav stavební Praha, s.p. – Branch 0200 — 1 calibration item

Laboratory locations

Technický a zkušební ústav stavební Praha, s.p. (main site) — Prosecká 811/76a, Prosek, 190 00 Praha 9
Technický a zkušební ústav stavební Praha, s.p. – oddział TIS — Prosecká 811/76a, 190 00 Praha 9
Technický a zkušební ústav stavební Praha, s.p. – oddział 0200 — Nemanická 441, 370 10 České Budějovice

Certificate information

Certificate date: 30.10.2024

Accreditation scope — calibration items (11)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Technický a zkušební ústav stavební Praha, s.p. – TIS Branch
1	Dial indicators	Calibration – length 0 mm to 100 mm · CMC 9 µm CMC for the field of measured quantity: Length	Measurement on a spiral microscope	IP 0960K003
2	Slide gauges	Calibration – length 0 mm to 250 mm · CMC 0,015 mm 250 mm to 450 mm · CMC 0,03 mm 450 mm to 1000 mm · CMC 0,05 mm CMC for the field of measured quantity: Length	Measurement with parallel gauge blocks	IP 0960K006
3	Electronic length sensors	Calibration – length 0 mm to 250 mm · CMC 0,01 mm CMC for the field of measured quantity: Length	Measurement with parallel gauge blocks	IP 0960K005
4	Flowmeters that can be calibrated with water	Calibration – flow rate cold water — 0,005 m³/h to 20 m³/h · CMC 0,15 % hot water — 0,005 m³/h to 20 m³/h · CMC 0,20 % cold water — 20 m³/h to 200 m³/h · CMC 0,15 % hot water — 20 m³/h to 200 m³/h · CMC 0,20 % CMC for the field of measured quantity: Flow rate	Mass method	IP 0960K011
5	Flowmeters that can be calibrated with water	Calibration – flow rate cold water — 0,005 m³/h to 20 m³/h · CMC 0,20 % hot water — 0,005 m³/h to 20 m³/h · CMC 0,25 % cold water — 20 m³/h to 200 m³/h · CMC 0,20 % hot water — 20 m³/h to 200 m³/h · CMC 0,25 % CMC for the field of measured quantity: Flow rate	Volume method	IP 0960K011
6	Force / tensile testing machines and presses, working force gauges	Calibration – force, mechanical tests Tension — 1 N to 30 N · CMC 0,080 % Compression — 1 N to 30 N · CMC 0,080 % CMC for the field of measured quantity: Force, mechanical tests	Loading with weights	IP 0960K072
7	Force / tensile testing machines and presses, working force gauges	Calibration – force, mechanical tests Tension — 30 N to 200 N · CMC 0,040 % Tension — 200 N to 20 kN · CMC 0,025 % Tension — 20 kN to 100 kN · CMC 0,060 % Compression — 30 N to 200 N · CMC 0,040 % Compression — 200 N to 2 kN · CMC 0,025 % Compression — 2 kN to 100 kN · CMC 0,040 % Compression — 100 kN to 500 kN · CMC 0,070 % Compression — 500 kN to 1 MN · CMC 0,090 % Compression — 1 MN to 5 MN · CMC 0,025 % CMC for the field of measured quantity: Force, mechanical tests	Comparison with a standard force-proving instrument	IP 0960K072
8	Hardness / Schmidt type hardness testers (for concrete and other materials)	Calibration – force, mechanical tests Type L — 73 Rₖ to 77 Rₖ · CMC 0,7 Rₖ Type N — 79 Rₖ to 83 Rₖ · CMC 0,7 Rₖ CMC for the field of measured quantity: Force, mechanical tests	Check impacts on a standard anvil	IP 0960K001
9	Deformation manometers, electromechanical manometers with a pressure transducer or with digital indication	Calibration – pressure gauge pressure, liquid — 0,025 MPa to 60 MPa · CMC 0,08 % CMC for the field of measured quantity: Pressure	Comparison with a standard piston manometer	IP 0960K018
10	Direct-indicating thermometers	Calibration – temperature 0 °C to 180 °C · CMC 0,2 °C CMC for the field of measured quantity: Temperature	Comparison with a standard Pt100 resistance temperature sensor in a water and oil bath	IP 0960K020
Technický a zkušební ústav stavební Praha, s.p. – Branch 0200
11	Direct-indicating thermometers, thermometric devices	Calibration – temperature -40 °C to 100 °C · CMC 0,3 °C 100 °C to 250 °C · CMC 0,4 °C 250 °C to 500 °C · CMC 1,4 °C 500 °C to 900 °C · CMC 1,9 °C 900 °C to 1 200 °C · CMC 2,7 °C CMC for the field of measured quantity: Temperature	Comparison with a standard digital thermometer in the calibrated device	IP 0960K014

Reference standards (9)

IP 0960K001

IP 0960K003

IP 0960K005

IP 0960K006

IP 0960K011

IP 0960K014

IP 0960K018

IP 0960K020

IP 0960K072

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2275