Sign up
LabCoda / Accreditation scopes / 🇨🇿 Czech Republic / 2263

🇨🇿 Pavel Čutka PL

ČIA 2263 • Praha 8, Czech Republic • 23 calibration items

Metrology & calibration

Pavel Čutka is a calibration laboratory accredited by ČIA under number 2263 (Praha 8, Czech Republic). Its accreditation scope covers 23 calibration items in the following areas: Metrology & calibration. Calibrated items include: Hardness testers for plastics, Force meters, Hardness reference blocks and samples Brinell, Hardness reference blocks and samples Knoop. Most frequently used calibration principles: Indirect measurement on reference blocks, ČSN EN ISO 4545-2, ASTM E92, ASTM E384, ČSN EN ISO 6507-2, ASTM E92, ASTM E384.

At a glance

  • Accreditation number: ČIA 2263
  • Calibration items in scope: 23
  • Types of calibrated items: 22
  • Calibration principles used: 15
  • City: Praha 8, Czech Republic
  • Valid until: 22-06-2031
Accreditation number
2263
Accreditation body
ČIA
Address
Kašparovo nám. 2254/4, 180 00 Praha 8 - Libeň
City
Praha 8, Czech Republic
Division
CENTRUM METROLOGICZNE
Valid until
22-06-2031

What this laboratory calibrates (22)

Calibration principles (15)

Certificate information

Certificate date
22.06.2026

Accreditation scope — calibration items (23)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Hardness testers Rockwell Calibration – force, hardness
10 HR to 130 HR · CMC 0,5 HR
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 6508-2, ASTM E18 PI 101
2 Hardness testers for plastics Calibration – force, hardness
10 HB to 500 HB · CMC 1,0 %
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 2039-1 PI 101
3 Hardness testers for plastics Calibration – force, hardness
1 HR to 130 HR · CMC 0,5 HR
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 2039-2 PI 101
4 Hardness testers for rubber Calibration – force, hardness
1 IRHD to 110 IRHD · CMC 0,4 IRHD 1 IRHD-M to 110 IRHD-M · CMC 0,6 IRHD-M
CMC for the field of measured quantity: Force, hardness
 ČSN ISO 48-2 PI 101
5 Hardness testers Brinell Calibration – force, hardness
10 HBW to 650 HBW · CMC 0,5 %
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 6506-2, ASTM E10 PI 102
6 Hardness testers Vickers Calibration – force, hardness
10 HV to 3000 HV · CMC 0,5 %
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 6507-2, ASTM E92, ASTM E384 PI 102
7 Hardness testers Knoop Calibration – force, hardness
10 HK to 3000 HK · CMC 0,8 %
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 4545-2, ASTM E92, ASTM E384 PI 102
8 Hardness testers Shore for non-metals Calibration – force, hardness
1 HS to 110 HS · CMC 0,25 HS
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 868, ČSN ISO 48-4 PI 103
9 Hardness testers Leeb Calibration – force, hardness
10 HL to 1000 HL · CMC 0,5 %
CMC for the field of measured quantity: Force, hardness
 Indirect measurement on reference blocks PI 103
10 Hardness testers UCI Calibration – force, hardness
10 HV to 1000 HV · CMC 1,0 HV
CMC for the field of measured quantity: Force, hardness
 Indirect measurement on reference blocks PI 103
11 Hardness testers Ernst Calibration – force, hardness
10 HV to 1000 HV · CMC 1,0 HV
CMC for the field of measured quantity: Force, hardness
 Indirect measurement on reference blocks PI 103
12 Hardness testers Shore for metals Calibration – force, hardness
1 SH to 150 SH · CMC 1,5 SH
CMC for the field of measured quantity: Force, hardness
 Indirect measurement on reference blocks PI 103
13 Hardness testers Webster Calibration – force, hardness
1 HW to 25 HW · CMC 0,2 HW
CMC for the field of measured quantity: Force, hardness
 Indirect measurement on reference blocks PI 103
14 Hardness testers Barcol Calibration – force, hardness
1 HBc to 100 HBc · CMC 0,8 HBc
CMC for the field of measured quantity: Force, hardness
 Indirect measurement on reference blocks PI 103
15 Hardness testers for coatings according to Buchholz Calibration – force, hardness
loading force — 1 N to 30 N · CMC 0,2 % indentation length — 0,1 mm to 2 mm · CMC 0,2 %
CMC for the field of measured quantity: Force, hardness
 Combined measurement of force and length PI 103
16 Indenters Rockwell Calibration – force, hardness
cone angle — 118 ° to 122 ° · CMC 0,05 ° radius of the spherical part — 0,1 mm to 0,3 mm · CMC 0,003 mm
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 6508-2, ASTM E18 PI 104
17 Indenters Vickers Calibration – force, hardness
angle between opposite faces — 134 ° to 138 ° · CMC 0,05 °
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 6507-2, ASTM E92, ASTM E384 PI 104
18 Indenters Knoop Calibration – force, hardness
angle of the pair of opposite faces — 128 ° to 175 ° · CMC 0,05 °
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 4545-2, ASTM E92, ASTM E384 PI 104
19 Hardness reference blocks and samples Rockwell Calibration – force, hardness
HRA to HRK — 10 HR to 130 HR · CMC 0,20 HR HRN to HRY — 10 HR to 130 HR · CMC 0,26 HR
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 6508-3, ASTM E18 PI 105
20 Hardness reference blocks and samples Brinell Calibration – force, hardness
HBW 10 — 10 HBW to 650 HBW · CMC 0,22 % HBW 5 — 10 HBW to 650 HBW · CMC 0,22 % HBW 2,5 — 10 HBW to 650 HBW · CMC 0,24 % HBW 1 — 10 HBW to 650 HBW · CMC 0,32 %
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 6506-3, ASTM E10 PI 106
21 Hardness reference blocks and samples Vickers Calibration – force, hardness
HV 30 to HV 120 — 10 HV to 3000 HV · CMC 0,40 % HV 10 — 10 HV to 3000 HV · CMC 0,42 % HV 5 — 10 HV to 3000 HV · CMC 0,46 % HV 2 and HV 3 — 10 HV to 3000 HV · CMC 0,49 % HV 1 — 10 HV to 3000 HV · CMC 0,52 % HV 0,5 — 10 HV to 3000 HV · CMC 0,61 % HV 0,1 to HV 0,3 — 10 HV to 3000 HV · CMC 0,63 % HV 0,05 — 10 HV to 3000 HV · CMC 0,83 % HV 0,01 to HV 0,02 — 10 HV to 3000 HV · CMC 1,1 %
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 6507-3, ASTM E92, ASTM E384 PI 106
22 Hardness reference blocks and samples Knoop Calibration – force, hardness
HK 2 — 10 HK to 3000 HK · CMC 0,80 % HK 1 — 10 HK to 3000 HK · CMC 0,95 % HK 0,5 — 10 HK to 3000 HK · CMC 1,2 % HK 0,3 — 10 HK to 3000 HK · CMC 1,4 % HK 0,1 — 10 HK to 3000 HK · CMC 1,7 % HK 0,05 — 10 HK to 3000 HK · CMC 2,2 % HK 0,01 to HK 0,02 — 10 HK to 3000 HK · CMC 2,4 %
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 4545-3, ASTM E92, ASTM E384 PI 106
23 Force meters Calibration – force, hardness
0 N to 500 N · CMC 0,02 % 500 N to 2,5 kN · CMC 0,03 % 2,5 kN to 30 kN · CMC 0,10 %
CMC for the field of measured quantity: Force, hardness
 ČSN EN ISO 376 PI 107

Reference standards (7)

PI 101
PI 102
PI 103
PI 104
PI 105
PI 106
PI 107

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2263