Sign up
LabCoda / Accreditation scopes / 🇨🇿 Czech Republic / 2239

🇨🇿 Metalco Services s.r.o. PL

ČIA 2239 • Roztoky, Czech Republic • 4 calibration items

Metrology & calibration

Metalco Services s.r.o. is a calibration laboratory accredited by ČIA under number 2239 (Roztoky, Czech Republic). Its accreditation scope covers 4 calibration items in the following areas: Metrology & calibration. Calibrated items include: Brinell hardness testers, Knoop hardness testers, Rockwell hardness testers, Vickers hardness testers. Most frequently used calibration principles: ČSN EN ISO 4545-1, ČSN EN ISO 6506-1, ČSN EN ISO 6507-1.

At a glance

  • Accreditation number: ČIA 2239
  • Calibration items in scope: 4
  • Types of calibrated items: 4
  • Calibration principles used: 4
  • City: Roztoky, Czech Republic
  • Valid until: 27-03-2029
Accreditation number
2239
Accreditation body
ČIA
Address
Havlíčkova 361, 252 63 Roztoky
City
Roztoky, Czech Republic
Division
Laboratorium wzorcujące
Valid until
27-03-2029

What this laboratory calibrates (4)

Calibration principles (4)

Certificate information

Certificate date
27.03.2024

Accreditation scope — calibration items (4)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Rockwell hardness testers Calibration – hardness
A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, 45T — 10 HR to 100 HR · CMC 0,34 HR
CMC for the field of measured quantity: Hardness
 ČSN EN ISO 6508-1 ČSN EN ISO 6508-2, čl. 4 až 5
2 Vickers hardness testers Calibration – hardness
HV0.01 to HV100 — 10 HV to 2000 HV · CMC 0,40% HV
CMC for the field of measured quantity: Hardness
 ČSN EN ISO 6507-1 ČSN EN ISO 6507-2, čl. 4 až 6 kromě čl. 5.3
3 Brinell hardness testers Calibration – hardness
HBW1, HBW2.5, HBW5, HBW10 — 10 HBW to 650 HBW · CMC 0,38% HBW
CMC for the field of measured quantity: Hardness
 ČSN EN ISO 6506-1 ČSN EN ISO 6506-2, čl. 4 až 6 kromě čl. 5.3
4 Knoop hardness testers Calibration – hardness
HK 0.01 to HK2 — 10 HK to 2000 HK · CMC 0,40% HK
CMC for the field of measured quantity: Hardness
 ČSN EN ISO 4545-1 ČSN EN ISO 4545-2 čl. 4 až 6 kromě čl. 5.3

Reference standards (4)

ČSN EN ISO 4545-2
ČSN EN ISO 6506-2
ČSN EN ISO 6507-2
ČSN EN ISO 6508-2

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2239