🇨🇿 INELSEV Servis s.r.o. PL
Metrology & calibration
INELSEV Servis s.r.o. is a calibration laboratory accredited by ČIA under number 2229 (Litvínov, Czech Republic). Its accreditation scope covers 5 calibration items in the following areas: Metrology & calibration. Calibrated items include: Deformation manometers, pressure transducers, digital manometers, Resistance thermometers, Thermocouple temperature sensors, Volume or flow meters – a) volume or volume flow rate. Most frequently used calibration principles: by gravimetry, Comparison with a reference pressure gauge, Comparison with a standard resistance thermometer in a liquid therm….
At a glance
- Accreditation number: ČIA 2229
- Calibration items in scope: 5
- Types of calibrated items: 5
- Calibration principles used: 4
- City: Litvínov, Czech Republic
- Valid until: 06-04-2027
- Accreditation number
- 2229
- Accreditation body
- ČIA
- Address
- Záluží 1, 436 01 Litvínov
- City
- Litvínov, Czech Republic
- Division
- Laboratorium wzorcujące
- Valid until
- 06-04-2027
What this laboratory calibrates (5)
- Deformation manometers, pressure transducers, digital manometers — 1 calibration item
- Resistance thermometers — 1 calibration item
- Thermocouple temperature sensors — 1 calibration item
- Volume or flow meters – a) volume or volume flow rate — 1 calibration item
- Volume or flow meters – b) mass or mass flow rate — 1 calibration item
Calibration principles (4)
- by gravimetry — 2 calibration items
- Comparison with a reference pressure gauge — 1 calibration item
- Comparison with a standard resistance thermometer in a liquid thermostatic bath or in a vertical block furnace — 1 calibration item
- Comparison with a standard thermoelectric sensor in a horizontal oven — 1 calibration item
Certificate information
- Certificate date
- 04.03.2026
Accreditation scope — calibration items (5)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Calibration items | |||||
| 1 | Volume or flow meters – a) volume or volume flow rate | Calibration – flow water (15 to 40) °C — 0,1 m³/h to 500 m³/h · CMC 0,1 % CMC for the field of measured quantity: Flow |
by gravimetry | MS 1010 | |
| 2 | Volume or flow meters – b) mass or mass flow rate | Calibration – flow water (15 to 40) °C — 0,1 t/h to 500 t/h · CMC 0,1 % CMC for the field of measured quantity: Flow |
by gravimetry | MS 1010 | |
| 3 | Deformation manometers, pressure transducers, digital manometers | Calibration – pressure Absolute pressure, Gas — 0 kPa to 30 kPa · CMC 2 Pa Absolute pressure, Gas — 30 kPa to 2000 kPa · CMC 0,03 % Overpressure/underpressure, Gas — -90 kPa to -20 kPa · CMC 0,03 % Overpressure/underpressure, Gas — -20 kPa to 20 kPa · CMC 5 Pa Overpressure/underpressure, Gas — 20 kPa to 1900 kPa · CMC 0,03 % Overpressure, Liquid — 0,1 MPa to 1,2 MPa · CMC 0,36 kPa Overpressure, Liquid — 1,2 MPa to 12 MPa · CMC 0,03 % Overpressure, Liquid — 12 MPa to 60 MPa · CMC 0,06 % CMC for the field of measured quantity: Pressure |
Comparison with a reference pressure gauge | MS2010, MS2012, MS2013 | |
| 4 | Resistance thermometers | Calibration – temperature -30 °C to 0 °C · CMC 0,2 °C 0 °C to 95 °C · CMC 0,1 °C 95 °C to 150 °C · CMC 0,2 °C 150 °C to 200 °C · CMC 0,3 °C 200 °C to 250 °C · CMC 0,4 °C 250 °C to 300 °C · CMC 0,5 °C 300 °C to 400 °C · CMC 0,6 °C CMC for the field of measured quantity: Temperature |
Comparison with a standard resistance thermometer in a liquid thermostatic bath or in a vertical block furnace | MS 3015 | |
| 5 | Thermocouple temperature sensors | Calibration – temperature 400 °C to 600 °C · CMC 2,2 °C 600 °C to 800 °C · CMC 3 °C 800 °C to 1000 °C · CMC 4 °C CMC for the field of measured quantity: Temperature |
Comparison with a standard thermoelectric sensor in a horizontal oven | MS 3014 | |
Reference standards (6)
MS 1010
MS 3014
MS 3015
MS2010
MS2012
MS2013