🇨🇿 Testpolymer EU s.r.o. PL
Materials & polymersAutomotive
Testpolymer EU s.r.o. is a laboratory accredited by ČIA under number 1595 (Luká, Czech Republic). Its accreditation scope covers 25 test methods in the following areas: Materials & polymers, Automotive. Test objects include: Plastics, Motor vehicle materials and components, Plastics, rubber, Non-cellular plastics.
At a glance
- Accreditation number: ČIA 1595
- Methods in scope: 25
- Types of test objects: 8
- City: Luká, Czech Republic
- Valid until: 14-06-2028
- Accreditation number
- 1595
- Accreditation body
- ČIA
- Address
- Střemeníčko 44, 783 24 Luká
- City
- Luká, Czech Republic
- Division
- Testpolymer EU
- Valid until
- 14-06-2028
What this laboratory tests (8)
- Plastics — 14 methods
- Motor vehicle materials and components — 4 methods
- Plastics, rubber — 2 methods
- Non-cellular plastics — 1 method
- Plastics, composites, materials used in electrical equipment and vehicles — 1 method
- Plastics, textiles, rubber, composites, resins — 1 method
- Plastics, vehicle parts — 1 method
- Vehicle interior materials — 1 method
Certificate information
- Certificate date
- 22.12.2025
Accreditation scope — test methods (25)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Plastics | Determination of tensile properties Regulated area: Tests |
ČSN EN ISO 527-1; ČSN EN ISO 527-2 | ||
| 2 | Plastics | Determination of flexural properties Regulated area: Tests |
ČSN EN ISO 178 | ||
| 3 | Plastics | Determination of impact strength by Charpy method Regulated area: Tests |
ČSN EN ISO 179-1 | ||
| 4 | Plastics | Determination of impact strength by Izod method Regulated area: Tests |
ČSN EN ISO 180 | ||
| 5 | Plastics | Determination of Vicat softening temperature Regulated area: Tests |
ČSN EN ISO 306 | ||
| 6 | Plastics, rubber | Determination of indentation hardness by means of a durometer (Shore A and Shore D hardness) Regulated area: Tests |
ČSN EN ISO 868; ČSN ISO 48-4; ČSN ISO 7619-1:2011 | ||
| 7 | Plastics | Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) Regulated area: Tests |
ČSN EN ISO 1133-1; ČSN EN ISO 1133-2; ASTM D 1238 | ||
| 8 | Non-cellular plastics | Determination of density - method A - Immersion method Regulated area: Tests |
ČSN EN ISO 1183-1, čl. 5.1 | ||
| 9 | Plastics | Determination of temperature of deflection under load Regulated area: Tests |
ČSN EN ISO 75-1; ČSN EN ISO 75-2 | ||
| 10 | Plastics | Determination of ash content - method A - direct annealing Regulated area: Tests |
ČSN EN ISO 3451-1, čl. 7.3; ISO 3451-2; ČSN EN ISO 3451-4 | ||
| 11 | Plastics | Determination of viscosity number Regulated area: Tests |
ČSN EN ISO 307 | ||
| 12 | Plastics | Determination of water content - method B2 - coulometric method Regulated area: Tests |
ČSN EN ISO 15512, čl. 6 | ||
| 13 | Plastics | Determination of the textile-glass and mineral-filler content – Calcination method Regulated area: Tests |
ČSN EN ISO 1172 | ||
| 14 | Vehicle interior materials | Determination of burning rate Regulated area: Tests |
ČSN ISO 3795; DIN 75200; FMVSS 302 (49 CFR § 571.302); TL 1010; VCS 5031,19:2024; PTL 8501 (VW 96243); DBL 5307:2022 čl. 6.1; GS 97038:2020; SES N 3245:2006; CMVSS (TSD No. 302); Standard 38 (KMVSS čl. 95); GSO 98; GB 8410; VSTD 19, čl. 19-1.5 a 19-1.6.3; D45 1333:2013; MS 300-08:2020; Contran 498; 7-G2000:2024 | ||
| 15 | Plastics, composites, materials used in electrical equipment and vehicles | Fire hazard testing - Horizontal and vertical flame tests Regulated area: Tests |
UL 94, čl. 7, 8, 9; ČSN EN 60695-11-10; TL 1011, mimo typ B | ||
| 16 | Plastics | Determination of thermal characteristics by DSC method Regulated area: Tests |
ČSN EN ISO 11357-1; ČSN EN ISO 11357-2; ČSN EN ISO 11357-3 | ||
| 17 | Plastics | Determination of hardness by ball indentation method Regulated area: Tests |
ČSN EN ISO 2039-1 | ||
| 18 | Plastics, vehicle parts | Determination of gloss value – method of measurement of directionally reflected light Regulated area: Tests |
ČSN EN ISO 2813 | ||
| 19 | Plastics, textiles, rubber, composites, resins | Identification by FTIR method Regulated area: Tests |
17025-PP-14 (manuál společnosti Nicolet) | ||
| 20 | Plastics | Thermogravimetric analysis (TGA) Regulated area: Tests |
ČSN EN ISO 11358-1 | ||
| 21 | Plastics, rubber | Accelerated thermal ageing test in air Regulated area: Tests |
DIN 53497; 17025-PP-36 (DIN 53497) | ||
| 22 | Motor vehicle materials and components | Determination of condensable components by reflectometric method (Fogging test) Regulated area: Tests |
DIN 75201, metoda A | ||
| 23 | Motor vehicle materials and components | Determination of condensable components by gravimetric method (Fogging test) Regulated area: Tests |
PV 3015; DIN 75201, metoda B | ||
| 24 | Motor vehicle materials and components | Determination of odour intensity Regulated area: Tests |
PV 3900; VDA 270 | ||
| 25 | Motor vehicle materials and components | Determination of releasable formaldehyde by spectrophotometry Regulated area: Tests |
PV 3925, metoda B; VDA 275 | ||
Reference standards (59)
17025-PP-14
17025-PP-36
7-G2000:2024
ASTM D 1238
CMVSS (TSD No. 302)
Contran 498
D45 1333:2013
DBL 5307:2022 čl. 6.1
DIN 53497
DIN 75200
DIN 75201, metoda A
DIN 75201, metoda B
FMVSS 302 (49 CFR § 571.302)
GB 8410
GS 97038:2020
GSO 98
ISO 3451-2
MS 300-08:2020
PTL 8501 (VW 96243)
PV 3015
PV 3900
PV 3925, metoda B
SES N 3245:2006
Standard 38 (KMVSS čl. 95)
TL 1010
TL 1011, mimo typ B
UL 94, čl. 7, 8, 9
VCS 5031,19:2024
VDA 270
VDA 275
VSTD 19, čl. 19-1.5 a 19-1.6.3
manuál společnosti Nicolet
ČSN EN 60695-11-10
ČSN EN ISO 1133-1
ČSN EN ISO 1133-2
ČSN EN ISO 11357-1
ČSN EN ISO 11357-2
ČSN EN ISO 11357-3
ČSN EN ISO 11358-1
ČSN EN ISO 1172
ČSN EN ISO 1183-1, čl. 5.1
ČSN EN ISO 15512, čl. 6
ČSN EN ISO 178
ČSN EN ISO 179-1
ČSN EN ISO 180
ČSN EN ISO 2039-1
ČSN EN ISO 2813
ČSN EN ISO 306
ČSN EN ISO 307
ČSN EN ISO 3451-1, čl. 7.3
ČSN EN ISO 3451-4
ČSN EN ISO 527-1
ČSN EN ISO 527-2
ČSN EN ISO 75-1
ČSN EN ISO 75-2
ČSN EN ISO 868
ČSN ISO 3795
ČSN ISO 48-4
ČSN ISO 7619-1:2011