🇨🇿 Vysoké učení technické v Brně PL
Construction
Vysoké učení technické v Brně is a laboratory accredited by ČIA under number 1396 (Brno, Czech Republic). Its accreditation scope covers 93 test methods in the following areas: Construction. Test objects include: Hardened concrete, Aggregates, Fresh concrete, Thermal insulation products.
At a glance
- Accreditation number: ČIA 1396
- Methods in scope: 93
- Types of test objects: 41
- City: Brno, Czech Republic
- Valid until: 22-02-2027
- Accreditation number
- 1396
- Accreditation body
- ČIA
- Address
- Purkyňova 139, 612 00 Brno
- City
- Brno, Czech Republic
- Division
- Laboratorium Badawcze przy ÚTHD FAST VUT w Brnie
- Valid until
- 22-02-2027
What this laboratory tests (41)
- Hardened concrete — 18 methods
- Aggregates — 10 methods
- Fresh concrete — 8 methods
- Thermal insulation products — 7 methods
- Concrete products – concrete paving blocks, concrete paving flags, concrete kerb units — 4 methods
- Masonry units — 4 methods
- Cement — 3 methods
- Building materials — 2 methods
- Concrete products - building components — 2 methods
- Natural stone — 2 methods
- Surface finish of building structures — 2 methods
- Unbound and hydraulically bound mixtures — 2 methods
- Aggregates, fly ash, cement — 1 method
- Cement, fly ash — 1 method
- Cement, hardened concrete, concrete products - building components — 1 method
- and 26 more
Certificate information
- Certificate date
- 21.11.2024
Accreditation scope — test methods (93)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Fresh concrete | Determination of consistency - slump test Regulated area: Tests |
ČSN EN 12350-2; STN EN 12350-2 | ||
| 2 | Fresh concrete | Determination of workability – flow table test Regulated area: Tests |
ČSN EN 12350-5; STN EN 12350-5 | ||
| 3 | Fresh concrete | Determination of air content – pressure method Regulated area: Tests |
ČSN EN 12350-7, mimo čl. 5; STN EN 12350-7, mimo čl. 5 | ||
| 4 | Fresh concrete | Determination of mass per unit volume Regulated area: Tests |
ČSN EN 12350-6; STN EN 12350-6 | ||
| 5 | Fresh concrete | Determination of volume changes Regulated area: Tests |
MP VUT č. 6 (Önorm B 3329, čl. 7.3.1) | ||
| 6 | Fresh concrete | Determination of bleeding Regulated area: Tests |
MP VUT č. 7 (Směrnice Merkblat Weiche Betone) | ||
| 7 | Fresh concrete | Determination of consistency - Slump-flow test Regulated area: Tests |
ČSN EN 12350-8 | ||
| 8 | Hardened concrete | Determination of mass per unit volume Regulated area: Tests |
ČSN EN 12390-7; STN EN 12390-7 | ||
| 9 | Hardened concrete | Determination of compressive strength of test specimens Regulated area: Tests |
ČSN EN 12390-3; STN EN 12390-3 | ||
| 10 | Hardened concrete | Determination of compressive strength of test specimens Regulated area: Tests |
ČSN EN 12504-1, mimo čl. 6; STN EN 12504-1, mimo čl. 6 | ||
| 11 | Hardened concrete | Determination of tensile strength of concrete Regulated area: Tests |
ČSN 73 1318 Přílohy 1, 2 | ||
| 12 | Hardened concrete | Determination of flexural strength of test specimens Regulated area: Tests |
ČSN EN 12390-5; STN EN 12390-5 | ||
| 13 | Hardened concrete | Determination of absorptivity and moisture content Regulated area: Tests |
MP VUT č. 3 (ČSN 73 1316) | ||
| 14 | Hardened concrete | Determination of watertightness Regulated area: Tests |
MP VUT č. 1 (ČSN 73 1321) | ||
| 15 | Hardened concrete | Determination of resistance to frost Regulated area: Tests |
ČSN 73 1322 | ||
| 16 | Hardened concrete, screed materials | Determination of abrasiveness – acc. to Böhme Regulated area: Tests |
ČSN 73 1324; ČSN EN 13892-3 | ||
| 17 | Hardened concrete | Determination resistance to water and chemical agents Regulated area: Tests |
ČSN 73 1326; STN 73 1326; MP VUT č. 4 (ČSN 731326) | ||
| 18 | Hardened concrete | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 12390-6; STN EN 12390-6 | ||
| 19 | Hardened concrete | Determination of volume changes Regulated area: Tests |
ČSN 73 1320 | ||
| 20 | Hardened concrete | Determination of air void characteristics Regulated area: Tests |
ČSN EN 480-11; STN EN 480-11 | ||
| 21 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN EN 12390-8; STN EN 12390-8 | ||
| 22 | Hardened concrete | Determination of static modulus of elasticity in compression Regulated area: Tests |
ČSN ISO 1920-10 | ||
| 23 | Hardened concrete | Determination of hardness – non-destructive determination of compressive strength Regulated area: Tests |
ČSN EN 12504-2; ČSN 73 1373 | ||
| 24 | Young sprayed concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 14488-2 | ||
| 25 | Hardened concrete | Determination of static modulus of elasticity in compression Regulated area: Tests |
ČSN EN 12390-13; STN EN 12390-13 | ||
| 26 | Hardened concrete | Determination of shape, dimensions and deviations of test specimens and moulds Regulated area: Tests |
ČSN EN 12390-1; STN EN 12390-1; ČSN EN 12390-2; STN EN 12390-2 | ||
| 27 | Hardened concrete, hardened fiber-reinforced concrete | Determination of flexural strength Regulated area: Tests |
ČSN P 73 2452 | ||
| 28 | Concrete products – tiles and pavers | Testing of compressive strength Regulated area: Tests |
MP VUT č. 2 (ČSN 73 6131-1, Příloha A) | ||
| 29 | Concrete products – concrete paving blocks, concrete paving flags, concrete kerb units | Determination of dimensions and visual factors Regulated area: Tests |
ČSN EN 1338, Přílohy C, J; ČSN EN 1339, Přílohy C, J; ČSN EN 1340, Přílohy C, J | ||
| 30 | Concrete products – concrete paving blocks, concrete paving flags, concrete kerb units | Determination of resistance to freezing/thawing Regulated area: Tests |
ČSN EN 1338, Příloha D; ČSN EN 1339, Příloha D; ČSN EN 1340, Příloha D | ||
| 31 | Concrete products – concrete paving blocks, concrete paving flags, concrete kerb units, concrete pipes and fittings made of unreinforced, steel fibre and reinforced concrete, concrete manholes and inspection chambers | Determination of absorptivity Regulated area: Tests |
ČSN EN 1338, Příloha E; ČSN EN 1339, Příloha E; ČSN EN 1340, Příloha E; ČSN EN 1916, Příloha F; ČSN EN 1917, Příloha D | ||
| 32 | Concrete products - concrete pipes and fittings, unreinforced, steel fibre and reinforced, concrete manholes and inspection chambers | Determination of load capacity at peak compression and vertical load capacity Regulated area: Tests |
ČSN EN 1916, Příloha C; ČSN EN 1917, Přílohy A, B | ||
| 33 | Concrete products - concrete manholes and inspection chambers | Determination of loading of manhole steps Regulated area: Tests |
ČSN EN 1917, Příloha E | ||
| 34 | Concrete products – concrete paving blocks | Determination of indirect tensile strength Regulated area: Tests |
ČSN EN 1338, Příloha F | ||
| 35 | Concrete products – concrete paving flags, concrete kerb units | Determination of flexural strength Regulated area: Tests |
ČSN EN 1339, Příloha F; ČSN EN 1340, Příloha F | ||
| 36 | Ceramic coverings | Determination of slip resistance by pendulum method Regulated area: Tests |
ČSN 72 5191, Příloha D | ||
| 37 | Roads, runways | Measurement of slip/skid resistance of a surface – Pendulum test Regulated area: Tests |
ČSN EN 13036-4 | ||
| 38 | Roads | Determination of slip resistance of pedestrian surfaces Regulated area: Tests |
ČSN P CEN/TS 16165, Příloha C | ||
| 39 | Concrete products – prefabricated concrete products | Resistance to freezing/thawing with/without the use of de-icing salts Regulated area: Tests |
ČSN EN 13198 Příloha A, B | ||
| 40 | Concrete products – concrete paving blocks, concrete paving flags, concrete kerb units | Determination of abrasiveness by Böhme method Regulated area: Tests |
ČSN EN 1338, Příloha H; ČSN EN 1339, Příloha H; ČSN EN 1340, Příloha H | ||
| 41 | Concrete products – concrete paving blocks, concrete paving flags, concrete kerb units | Determination of skid resistance Regulated area: Tests |
ČSN EN 1338, Příloha I; ČSN EN 1339, Příloha I; ČSN EN 1340, Příloha I | ||
| 42 | Concrete products - building components | Determination of dimensions and checks of shape Regulated area: Tests |
ČSN 73 0212-5 | ||
| 43 | Concrete products - sleepers and bearers | Determination of static load capacity Regulated area: Tests |
ČSN EN 13230-2, mimo čl. 4.3.3, 4.3.4, 4.4.3, 4.5.2 | ||
| 44 | Concrete products - building components | Determination of weight Regulated area: Tests |
ČSN 73 2045 | ||
| 45 | Hardened concrete, concrete products - building components | Determination of permeability by the Torrent permeability tester method Regulated area: Tests |
MP VUT č. 8 (Směrnice a manuál firmy PROCEQ); ČSN P 73 2404, příloha N, čl. N.3.8 | ||
| 46 | Cement, hardened concrete, concrete products - building components | Determination of the carbonation resistance - Accelerated carbonation method Regulated area: Tests |
ČSN EN 12390-12 | ||
| 47 | Aggregates | Determination of particle shape - Shape index Regulated area: Tests |
ČSN EN 933-4 | ||
| 48 | Aggregates | Determination of loose bulk density and voids Regulated area: Tests |
ČSN EN 1097-3 | ||
| 49 | Aggregates | Determination of particle size distribution – Sieving analysis Regulated area: Tests |
ČSN EN 933-1 | ||
| 50 | Natural stone | Determination of compressive strength Regulated area: Tests |
ČSN EN 1926 | ||
| 51 | Aggregates | Determination of particle density and water absorption Regulated area: Tests |
ČSN EN 1097-6 | ||
| 52 | Natural stone | Determination of the slip resistance by means of pendulum tester Regulated area: Tests |
ČSN EN 14231 | ||
| 53 | Aggregates, fly ash, cement | Determination of grading and fineness Regulated area: Tests |
ČSN EN 933-10; ČSN EN 450-1, čl. 5.3.1; ČSN EN 196-6, mimo čl. 3 a 4 | ||
| 54 | Aggregates | Determination of resistance to freezing and thawing Regulated area: Tests |
ČSN EN 1367-1; ČSN EN 13450 ed. 2, Příloha D | ||
| 55 | Aggregates | Sand equivalent test Regulated area: Tests |
ČSN EN 933-8 + A1 | ||
| 56 | Aggregates | Determination of lightweight pollutants and potential presence of humus Regulated area: Tests |
ČSN EN 1744-1, kapitoly 14.2 a 15.1 | ||
| 57 | Aggregates | Assessment of fines – Methylene blue test Regulated area: Tests |
ČSN EN 933-9 | ||
| 58 | Aggregates | Determination of the water content by drying in a ventilated oven Regulated area: Tests |
ČSN EN 1097-5 | ||
| 59 | Masonry units | Determination of compressive strength Regulated area: Tests |
ČSN EN 772-1 + A1 | ||
| 60 | Masonry units, concrete masonry units, masonry units of manufactured and natural stone, burnt masonry units | Determination of water absorption due to capillary action and the initial rate of water absorption Regulated area: Tests |
ČSN EN 772-11 | ||
| 61 | Masonry units | Determination of dimensions Regulated area: Tests |
ČSN EN 772-16 | ||
| 62 | Masonry units, concrete masonry units, masonry units of manufactured and natural stone | Determination of flatness of faces Regulated area: Tests |
ČSN EN 772-20 | ||
| 63 | Masonry units | Determination of density Regulated area: Tests |
ČSN EN 772-13 | ||
| 64 | Masonry units | Determination of bending strength Regulated area: Tests |
ČSN EN 772-6 | ||
| 65 | Masonry units, formwork blocks | Determination bending strength of side shuttering blocks Regulated area: Tests |
ČSN EN 15435, Příloha B | ||
| 66 | Paints and varnishes | Determination of carbon dioxide permeability Regulated area: Tests |
ČSN EN 1062-6, Metoda A | ||
| 67 | Surface finish of building structures | Test of adhesion to the base Regulated area: Tests |
ČSN 73 2577 | ||
| 68 | Surface finish, screed materials | Testing of bond strength Regulated area: Tests |
ČSN EN 1542; ČSN EN 13892-8 | ||
| 69 | Surface finish of building structures | Determination of water vapour transmission Regulated area: Tests |
ČSN 73 2580 | ||
| 70 | Insulation layers | Testing of bond strength Regulated area: Tests |
ČSN 73 6242, Příloha B | ||
| 71 | Hardened mortars, screed materials, surface finish | Testing of flexural strength and compressive strength Regulated area: Tests |
ČSN EN 12190; ČSN EN 1015-11; ČSN EN 13892-2 | ||
| 72 | Cement, fly ash | Determination of flexural strength and compressive strength, determination of efficiency index Regulated area: Tests |
ČSN EN 196-1; ČSN EN 450-1, čl. 5.3.2 | ||
| 73 | Hardened mortars | Determination of mass per unit volume Regulated area: Tests |
ČSN EN 1015-10 | ||
| 74 | Fresh mortar | Determination of consistence Regulated area: Tests |
ČSN EN 1015-3 | ||
| 75 | Fillers, cements | Granulometric determination Regulated area: Tests |
MP VUT č. 5 (ČSN EN 933-10; Manuál firmy MALVERN k přístroji MASTERSIZER 2000) | ||
| 76 | Cement | Determination of specific surface Regulated area: Tests |
ČSN EN 196-6, mimo čl. 3 a 5 | ||
| 77 | Cement | Determination of setting times and soundness Regulated area: Tests |
ČSN EN 196-3 | ||
| 78 | Cement | Determination of specific gravity Regulated area: Tests |
ČSN 72 2113, metoda B | ||
| 79 | Building materials | Determination of steady-state thermal conductivity coefficient - by test - by calculation Regulated area: Tests |
ČSN 72 7012 - 1; ČSN 72 7012 - 3; ČSN EN 1745 | ||
| 80 | Building materials | Determination of steady-state thermal conductivity coefficient - by test - by calculation Regulated area: Tests |
ČSN EN 12667; ČSN EN 1745 | ||
| 81 | Thermal insulation products | Determination of thickness Regulated area: Tests |
ČSN EN 823 | ||
| 82 | Thermal insulation products | Determination of length and width Regulated area: Tests |
ČSN EN 822 | ||
| 83 | Thermal insulation products | Determination of linear dimensions Regulated area: Tests |
ČSN EN 12085 | ||
| 84 | Thermal insulation products | Determination of mass per unit volume Regulated area: Tests |
ČSN EN ISO 29470 | ||
| 85 | Thermal insulation products | Determination of short term water absorption Regulated area: Tests |
ČSN EN ISO 29767 | ||
| 86 | Thermal insulation products | Determination of compressive strength at 10% deformation Regulated area: Tests |
ČSN EN 826 | ||
| 87 | Thermal insulation products | Determination of tensile strength perpendicular to faces Regulated area: Tests |
ČSN EN 1607 | ||
| 88 | Unbound and hydraulically bound mixtures | Determination of laboratory reference density and water content – Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3 a 7.6 | ||
| 89 | Unbound and hydraulically bound mixtures | Determination of compressive strength Regulated area: Tests |
ČSN EN 13286-41 | ||
| 90 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1; STN EN 12350-1 | ||
| 91 | Hardened concrete | Sampling by cored specimen method Regulated area: Sampling |
ČSN EN 12504-1, čl. 6 | ||
| 92 | Sprayed concrete | Fresh and hardened concrete sampling Regulated area: Sampling |
ČSN EN 14488-1 | ||
| 93 | Aggregates | Aggregate sampling. Reduction of laboratory samples Regulated area: Sampling |
ČSN EN 932-1; ČSN EN 932-2 | ||
Reference standards (146)
MP VUT č. 1
MP VUT č. 2
MP VUT č. 3
MP VUT č. 4
MP VUT č. 5
MP VUT č. 6
MP VUT č. 7
MP VUT č. 8
Manuál firmy MALVERN k přístroji MASTERSIZER 2000
STN 73 1326
STN EN 12350-1
STN EN 12350-2
STN EN 12350-5
STN EN 12350-6
STN EN 12350-7, mimo čl. 5
STN EN 12390-1
STN EN 12390-13
STN EN 12390-2
STN EN 12390-3
STN EN 12390-5
STN EN 12390-6
STN EN 12390-7
STN EN 12390-8
STN EN 12504-1, mimo čl. 6
STN EN 480-11
Směrnice Merkblat Weiche Betone
Směrnice a manuál firmy PROCEQ
Önorm B 3329, čl. 7.3.1
ČSN 72 2113, metoda B
ČSN 72 5191, Příloha D
ČSN 72 7012 - 1
ČSN 72 7012 - 3
ČSN 73 0212-5
ČSN 73 1316
ČSN 73 1318 Přílohy 1, 2
ČSN 73 1320
ČSN 73 1321
ČSN 73 1322
ČSN 73 1324
ČSN 73 1326
ČSN 73 1373
ČSN 73 2045
ČSN 73 2577
ČSN 73 2580
ČSN 73 6131-1, Příloha A
ČSN 73 6242, Příloha B
ČSN 731326
ČSN EN 1015-10
ČSN EN 1015-11
ČSN EN 1015-3
ČSN EN 1062-6, Metoda A
ČSN EN 1097-3
ČSN EN 1097-5
ČSN EN 1097-6
ČSN EN 12085
ČSN EN 12190
ČSN EN 12350-1
ČSN EN 12350-2
ČSN EN 12350-5
ČSN EN 12350-6
ČSN EN 12350-7, mimo čl. 5
ČSN EN 12350-8
ČSN EN 12390-1
ČSN EN 12390-12
ČSN EN 12390-13
ČSN EN 12390-2
ČSN EN 12390-3
ČSN EN 12390-5
ČSN EN 12390-6
ČSN EN 12390-7
ČSN EN 12390-8
ČSN EN 12504-1, mimo čl. 6
ČSN EN 12504-1, čl. 6
ČSN EN 12504-2
ČSN EN 12667
ČSN EN 13036-4
ČSN EN 13198 Příloha A, B
ČSN EN 13230-2, mimo čl. 4.3.3, 4.3.4, 4.4.3, 4.5.2
ČSN EN 13286-2, mimo čl. 7.3 a 7.6
ČSN EN 13286-41
ČSN EN 1338, Příloha D
ČSN EN 1338, Příloha E
ČSN EN 1338, Příloha F
ČSN EN 1338, Příloha H
ČSN EN 1338, Příloha I
ČSN EN 1338, Přílohy C, J
ČSN EN 1339, Příloha D
ČSN EN 1339, Příloha E
ČSN EN 1339, Příloha F
ČSN EN 1339, Příloha H
ČSN EN 1339, Příloha I
ČSN EN 1339, Přílohy C, J
ČSN EN 1340, Příloha D
ČSN EN 1340, Příloha E
ČSN EN 1340, Příloha F
ČSN EN 1340, Příloha H
ČSN EN 1340, Příloha I
ČSN EN 1340, Přílohy C, J
ČSN EN 13450 ed. 2, Příloha D
ČSN EN 1367-1
ČSN EN 13892-2
ČSN EN 13892-3
ČSN EN 13892-8
ČSN EN 14231
ČSN EN 14488-1
ČSN EN 14488-2
ČSN EN 1542
ČSN EN 15435, Příloha B
ČSN EN 1607
ČSN EN 1744-1, kapitoly 14.2 a 15.1
ČSN EN 1745
ČSN EN 1916, Příloha C
ČSN EN 1916, Příloha F
ČSN EN 1917, Příloha D
ČSN EN 1917, Příloha E
ČSN EN 1917, Přílohy A, B
ČSN EN 1926
ČSN EN 196-1
ČSN EN 196-3
ČSN EN 196-6, mimo čl. 3 a 4
ČSN EN 196-6, mimo čl. 3 a 5
ČSN EN 450-1, čl. 5.3.1
ČSN EN 450-1, čl. 5.3.2
ČSN EN 480-11
ČSN EN 772-1 + A1
ČSN EN 772-11
ČSN EN 772-13
ČSN EN 772-16
ČSN EN 772-20
ČSN EN 772-6
ČSN EN 822
ČSN EN 823
ČSN EN 826
ČSN EN 932-1
ČSN EN 932-2
ČSN EN 933-1
ČSN EN 933-10
ČSN EN 933-4
ČSN EN 933-8 + A1
ČSN EN 933-9
ČSN EN ISO 29470
ČSN EN ISO 29767
ČSN ISO 1920-10
ČSN P 73 2404, příloha N, čl. N.3.8
ČSN P 73 2452
ČSN P CEN/TS 16165, Příloha C