🇨🇿 VIAKONTROL, spol. s r.o. PL

ČIA 1263 • Praha 9 - Běchovice, Czech Republic • 229 methods

Construction

VIAKONTROL, spol. s r.o. is a laboratory accredited by ČIA under number 1263 (Praha 9 - Běchovice, Czech Republic). Its accreditation scope covers 229 test methods in the following areas: Construction. Test objects include: Bituminous mixture, Aggregate, Bituminous mixture – finished layer, Bitumen and bituminous binder. Most frequently used techniques: GC/MS method.

At a glance

Accreditation number: ČIA 1263
Methods in scope: 229
Types of test objects: 16
Techniques used: 1
City: Praha 9 - Běchovice, Czech Republic
Valid until: 21-08-2028

Accreditation number: 1263
Accreditation body: ČIA
Address: Podnikatelská 539, 190 11 Praha 9 - Běchovice
City: Praha 9 - Běchovice, Czech Republic
Division: Laboratorium Badawcze VIAKONTROL
Valid until: 21-08-2028

What this laboratory tests (16)

Bituminous mixture — 57 methods
Aggregate — 35 methods
Bituminous mixture – finished layer — 22 methods
Bitumen and bituminous binder — 21 methods
Structural layer — 21 methods
Fresh concrete — 17 methods
Hardened concrete — 14 methods
Bituminous emulsion — 10 methods
Soil — 9 methods
Unbound layers, soil — 8 methods
Base layer — 4 methods
Bituminous sealant — 4 methods
Soil, fill — 3 methods
Recycled mixture — 2 methods
Bituminous mixture, bituminous binder, reclaimed asphalt — 1 method
and 1 more

Analytical techniques used (1)

GC/MS method — 1 method

Laboratory sections (9)

C – Louny — 48 methods
F – Měcholupy — 37 methods
A – Praha — 35 methods
H – Podbrezová — 29 methods
B – Valašské Meziříčí — 28 methods
D – Most — 22 methods
E – Ostrava — 17 methods
B1 – Třebovice — 12 methods
C2 – Most — 1 method

Laboratory locations

A – Praga — Podnikatelská 539
B – Valašské Meziříčí — Jiráskova 613/13
B1 – Třebovice — Třebovice (areál firmy AHM s.r.o.)
C – Louny — Průmyslová 2991
C2 – Most — Průmyslová 228 (areál firmy HERKUL a.s.)
D – Most — Průmyslová 228 (areál firmy HERKUL a.s.)
E – Ostrawa — Štěpaňákova 714
F – Měcholupy — Holedeč (obalovna asfaltových směsí)
H – Podbrezová — Kolkáreň 35

Certificate information

Certificate date: 18.12.2024

Accreditation scope — test methods (229)

No.	Test object	Methodology / Parameters	Technique	Reference document
A – Praha
1	Bitumen and bituminous binder	Determination of needle penetration, including sample preparation Regulated area: A – Praha – Tests		ČSN EN 1426; STN EN 1426
2	Bitumen and bituminous binder	Determination of the softening point, Ring and ball method Regulated area: A – Praha – Tests		ČSN EN 1427; STN EN 1427
3	Bitumen and bituminous binder	Determination of the Fraass breaking point Regulated area: A – Praha – Tests		ČSN EN 12593; STN EN 12593
4	Bitumen and bituminous binder	Determination of ductility Regulated area: A – Praha – Tests		ČSN 65 7061
5	Bitumen and bituminous binder	Determination of the tensile properties of modified bitumen by the force ductility method Regulated area: A – Praha – Tests		ČSN EN 13589
6	Bitumen and bituminous binder	Determination of solubility Regulated area: A – Praha – Tests		ČSN EN 12592
7	Bitumen and bituminous binder	Determination of adhesion of bituminous binders to aggregate Regulated area: A – Praha – Tests		ČSN 73 6161
8	Bitumen and bituminous binder	Determination of the affinity between aggregate and bitumen Regulated area: A – Praha – Tests		ČSN EN 12697-11; STN EN 12697-11
9	Bitumen and bituminous binder	Determination of the resistance to hardening under influence of heat and air – RTFOT method Regulated area: A – Praha – Tests		ČSN EN 12607-1
10	Bitumen and bituminous binder	Determination of the loss of mass after heating Regulated area: A – Praha – Tests		ČSN EN 13303
11	Bitumen and bituminous binder	Determination of the elastic recovery Regulated area: A – Praha – Tests		ČSN EN 13398; STN EN 13398
12	Bitumen and bituminous binder	Determination of storage stability Regulated area: A – Praha – Tests		ČSN EN 13399; STN EN 13399
13	Bitumen and bituminous binder	Determination of flash and fire points – Cleveland open cup method Regulated area: A – Praha – Tests		ČSN EN ISO 2592
14	Bitumen and bituminous binder	Accelerated long-term ageing in a pressure ageing vessel (PAV) Regulated area: A – Praha – Tests		ČSN EN 14769
15	Bitumen and bituminous binder	Determination of the flexural creep stiffness – Bending Beam Rheometer (BBR) Regulated area: A – Praha – Tests		ČSN EN 14771
16	Bitumen and bituminous binder	Determination of complex shear modulus and phase angle – Dynamic Shear Rheometer (DSR) Regulated area: A – Praha – Tests		ČSN EN 14770
17	Bitumen and bituminous binder	Determination of the equivalent temperature to complex shear modulus – Dynamic Shear Rheometer (DSR) – BTSV test Regulated area: A – Praha – Tests		ČSN EN 17643
18	Bitumen and bituminous binder	Determination of dynamic viscosity by rotating spindle viscometer Regulated area: A – Praha – Tests		ČSN EN 13302
19	Bitumen and bituminous binder	Determination of density and specific gravity – Capillary-stoppered pyknometer method Regulated area: A – Praha – Tests		ČSN EN 15326+A1
20	Bitumen and bituminous binder	MSCR test Regulated area: A – Praha – Tests		ČSN EN 16659
21	Bituminous emulsion	Determination of water content – Azeotropic distillation method Regulated area: A – Praha – Tests		ČSN EN 1428; STN EN 1428
22	Bituminous emulsion	Determination of water content – Drying balance method Regulated area: A – Praha – Tests		ČSN EN 16849; STN EN 16849
23	Bituminous emulsion	Determination of residue on sieving and determination of storage stability Regulated area: A – Praha – Tests		ČSN EN 1429; STN EN 1429
24	Bituminous emulsion	Determination of pH value by potentiometry Regulated area: A – Praha – Tests		ČSN EN 12850; STN EN 12850
25	Bituminous emulsion	Determination of adhesivity by water immersion test – Aggregate method Regulated area: A – Praha – Tests		ČSN EN 13614; STN EN 13614
26	Bituminous emulsion	Determination of mixing stability with cement Regulated area: A – Praha – Tests		ČSN EN 12848; STN EN 12848
27	Bituminous emulsion	Determination of mixing behaviour of cationic bituminous emulsions with filler Regulated area: A – Praha – Tests		ČSN EN 13075-2; STN EN 13075-2
28	Bituminous emulsion	Determination of binder aggregate adhesivity by the Vialit plate shock test method Regulated area: A – Praha – Tests		ČSN EN 12272-3
29	Bituminous emulsion	Determination of breaking value of cationic emulsions – mineral filler method Regulated area: A – Praha – Tests		ČSN EN 13075-1; STN EN 13075-1
30	Bituminous emulsion	Determination of efflux time by the efflux viscometer Regulated area: A – Praha – Tests		ČSN EN 12846-1; STN EN 12846-1
31	Bitumen and bituminous binder	Determination of cohesion by the pendulum test Regulated area: A – Praha – Tests		ČSN EN 13588; STN EN 13588
32	Bituminous sealant	Determination of density at 25 °C Regulated area: A – Praha – Tests		ČSN EN 13880-1
33	Bituminous sealant	Determination of cone penetration at 25 °C Regulated area: A – Praha – Tests		ČSN EN 13880-2
34	Bituminous sealant	Determination of penetration and recovery (resilience) Regulated area: A – Praha – Tests		ČSN EN 13880-3
35	Bituminous sealant	Determination of resistance to flow Regulated area: A – Praha – Tests		ČSN EN 13880-5
B – Valašské Meziříčí
36	Bituminous mixture	Determination of soluble binder content Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 12697-1
37	Bituminous mixture	Determination of particle size distribution Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 12697-2+A1
38	Bituminous mixture	Determination of the maximum density Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 12697-5
39	Bituminous mixture	Determination of bulk density of the specimen Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 12697-6
40	Bituminous mixture	Determination of void characteristics Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 12697-8
41	Bituminous mixture	Determination of the dimensions of a specimen Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 12697-29
42	Bituminous mixture	Determination of the water sensitivity of specimens Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 12697-12
43	Bituminous mixture	Determination of the indirect tensile strength Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 12697-23
44	Bituminous mixture – finished layer	Determination of interlayer bond strength – shear test Regulated area: B – Valašské Meziříčí – Tests		ČSN 73 6160, kap. 7.3
45	Bituminous mixture – finished layer	Determination of the thickness of a bituminous layer Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 12697-36, mimo kap. 6.2
46	Bituminous mixture – finished layer	Determination of the degree of compaction on cores Regulated area: B – Valašské Meziříčí – Tests		ČSN 73 6160, kap. 7.2, bod a), c)
47	Bituminous mixture – finished layer	Determination of void content of a bituminous layer on cores Regulated area: B – Valašské Meziříčí – Tests		ČSN 73 6160, kap. 7.4
48	Recycled mixture	Determination of indirect tensile strength and water resistance Regulated area: B – Valašské Meziříčí – Tests		ČSN 73 6147
49	Aggregate	Determination of particle size distribution – Sieving method Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 933-1
50	Aggregate	Determination of particle shape – Shape index Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 933-4
51	Aggregate	Determination of particle density and water absorption Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 1097-6, mimo kap. 9
52	Aggregate	Determination of water content by gravimetry Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 1097-5
53	Unbound layers, soil	Determination of bulk density Regulated area: B – Valašské Meziříčí – Tests		ČSN 72 1010, metoda A, D-1
54	Soil	Determination of water content by gravimetry Regulated area: B – Valašské Meziříčí – Tests		ČSN EN ISO 17892-1
55	Soil, fill	Determination of the degree of compaction Regulated area: B – Valašské Meziříčí – Tests		ČSN 72 1006, kap. 4.2.1.1
56	Unbound layers, soil	Determination of soil compactability – Proctor test Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 13286-2, mimo kap. 7.3 a 7.6
57	Structural layer	Static plate load test Regulated area: B – Valašské Meziříčí – Tests		ČSN 72 1006, příl. A
58	Structural layer	Dynamic load test of pavements and subgrade Regulated area: B – Valašské Meziříčí – Tests		ČSN 73 6192, skup. C
59	Structural layer	Measurement of pavement surface unevenness with a straightedge Regulated area: B – Valašské Meziříčí – Tests		ČSN 73 6175, kap. 8
60	Structural layer	Measurement of pavement surface unevenness with a planograph Regulated area: B – Valašské Meziříčí – Tests		ČSN 73 6175, kap. 9
61	Hardened concrete	Determination of the thickness of a concrete pavement on cores Regulated area: B – Valašské Meziříčí – Tests		ČSN EN 13863-3
62	Bituminous mixture	Sampling of bituminous mixture Regulated area: B – Valašské Meziříčí – Sampling		ČSN EN 12697-27
63	Aggregate	Sampling of aggregates Regulated area: B – Valašské Meziříčí – Sampling		ČSN EN 932-1
B1 – Třebovice
64	Bituminous mixture	Determination of soluble binder content Regulated area: B1 – Třebovice – Tests		ČSN EN 12697-1
65	Bituminous mixture	Determination of particle size distribution Regulated area: B1 – Třebovice – Tests		ČSN EN 12697-2+A1
66	Bituminous mixture	Determination of the maximum density Regulated area: B1 – Třebovice – Tests		ČSN EN 12697-5
67	Bituminous mixture	Determination of bulk density of the specimen Regulated area: B1 – Třebovice – Tests		ČSN EN 12697-6
68	Bituminous mixture	Determination of void characteristics Regulated area: B1 – Třebovice – Tests		ČSN EN 12697-8
69	Bituminous mixture	Determination of the dimensions of a specimen Regulated area: B1 – Třebovice – Tests		ČSN EN 12697-29
70	Bituminous mixture – finished layer	Determination of the thickness of a bituminous layer Regulated area: B1 – Třebovice – Tests		ČSN EN 12697-36, mimo kap. 6.2
71	Bituminous mixture – finished layer	Determination of the degree of compaction on cores Regulated area: B1 – Třebovice – Tests		ČSN 73 6160, kap. 7.2, bod a), c)
72	Aggregate	Determination of particle size distribution – Sieving method Regulated area: B1 – Třebovice – Tests		ČSN EN 933-1
73	Aggregate	Determination of particle shape – Shape index Regulated area: B1 – Třebovice – Tests		ČSN EN 933-4
74	Bituminous mixture	Sampling of bituminous mixture Regulated area: B1 – Třebovice – Sampling		ČSN EN 12697-27
75	Aggregate	Sampling of aggregates Regulated area: B1 – Třebovice – Sampling		ČSN EN 932-1
C – Louny
76	Bituminous mixture	Determination of soluble binder content Regulated area: C – Louny – Tests		ČSN EN 12697-1
77	Bituminous mixture	Determination of particle size distribution Regulated area: C – Louny – Tests		ČSN EN 12697-2+A1
78	Bituminous mixture	Determination of the maximum density Regulated area: C – Louny – Tests		ČSN EN 12697-5
79	Bituminous mixture	Determination of bulk density of the specimen Regulated area: C – Louny – Tests		ČSN EN 12697-6
80	Bituminous mixture	Determination of void characteristics Regulated area: C – Louny – Tests		ČSN EN 12697-8
81	Bituminous mixture	Determination of the dimensions of a specimen Regulated area: C – Louny – Tests		ČSN EN 12697-29
82	Bituminous mixture	Determination of the water sensitivity of specimens Regulated area: C – Louny – Tests		ČSN EN 12697-12
83	Bituminous mixture	Determination of the indirect tensile strength Regulated area: C – Louny – Tests		ČSN EN 12697-23
84	Bituminous mixture	Wheel tracking test – small-size device Regulated area: C – Louny – Tests		ČSN EN 12697-22+A1; STN EN 12697-22+A1
85	Bituminous mixture – finished layer	Determination of interlayer bond strength – shear test Regulated area: C – Louny – Tests		ČSN 73 6160, kap. 7.3
86	Bituminous mixture – finished layer	Determination of the thickness of a bituminous layer Regulated area: C – Louny – Tests		ČSN EN 12697-36, mimo kap. 6.2
87	Bituminous mixture – finished layer	Determination of the degree of compaction on cores Regulated area: C – Louny – Tests		ČSN 73 6160, kap. 7.2, bod a), c)
88	Bituminous mixture – finished layer	Determination of void content of a bituminous layer on cores Regulated area: C – Louny – Tests		ČSN 73 6160, kap. 7.4
89	Recycled mixture	Determination of indirect tensile strength and water resistance Regulated area: C – Louny – Tests		ČSN 73 6147
90	Aggregate	Determination of particle size distribution – Sieving method Regulated area: C – Louny – Tests		ČSN EN 933-1
91	Aggregate	Determination of particle shape – Shape index Regulated area: C – Louny – Tests		ČSN EN 933-4
92	Aggregate	Determination of particle density and water absorption Regulated area: C – Louny – Tests		ČSN EN 1097-6, mimo kap. 9
93	Aggregate	Determination of the particle density of filler – Pyknometer method Regulated area: C – Louny – Tests		ČSN EN 1097-7
94	Aggregate	Determination of particle size distribution of filler Regulated area: C – Louny – Tests		ČSN EN 933-10; STN EN 933-10
95	Aggregate	Determination of water content by gravimetry Regulated area: C – Louny – Tests		ČSN EN 1097-5
96	Unbound layers, soil	Determination of bulk density Regulated area: C – Louny – Tests		ČSN 72 1010, metoda A, D-1
97	Soil	Determination of particle size distribution Regulated area: C – Louny – Tests		ČSN EN ISO 17892-4
98	Soil	Determination of consistency limits Regulated area: C – Louny – Tests		ČSN EN ISO 17892-12; STN EN ISO 17892-12
99	Soil	Determination of water content by gravimetry Regulated area: C – Louny – Tests		ČSN EN ISO 17892-1
100	Soil, fill	Determination of the degree of compaction Regulated area: C – Louny – Tests		ČSN 72 1006, kap. 4.2.1.1
101	Soil	Determination of the California bearing ratio, immediate bearing index and linear swelling Regulated area: C – Louny – Tests		ČSN EN 13286-47
102	Unbound layers, soil	Determination of soil compactability – Proctor test Regulated area: C – Louny – Tests		ČSN EN 13286-2, mimo kap. 7.3 a 7.6
103	Structural layer	Static plate load test Regulated area: C – Louny – Tests		ČSN 72 1006, příl. A
104	Structural layer	Dynamic load tests of pavements and subgrade Regulated area: C – Louny – Tests		ČSN 73 6192, skup. C
105	Structural layer	Measurement of pavement surface unevenness with a straightedge Regulated area: C – Louny – Tests		ČSN 73 6175, kap. 8; ČSN EN 13036-7
106	Structural layer	Measurement of pavement surface unevenness with a planograph Regulated area: C – Louny – Tests		ČSN 73 6175, kap. 9
107	Base layer	Determination of the compressive strength of hydraulically bound mixtures Regulated area: C – Louny – Tests		ČSN EN 13286-41
108	Base layer	Determination of the indirect tensile strength of hydraulically bound mixtures Regulated area: C – Louny – Tests		ČSN EN 13286-42
109	Fresh concrete	Slump test Regulated area: C – Louny – Tests		ČSN EN 12350-2
110	Fresh concrete	Determination of degree of compactability Regulated area: C – Louny – Tests		ČSN EN 12350-4
111	Fresh concrete	Determination of bulk density Regulated area: C – Louny – Tests		ČSN EN 12350-6
112	Fresh concrete	Determination of air content – Pressure methods Regulated area: C – Louny – Tests		ČSN EN 12350-7, mimo kap. 5
113	Hardened concrete	Determination of shape, dimensions and other requirements for specimens and moulds Regulated area: C – Louny – Tests		ČSN EN 12390-1; STN EN 12390-1
114	Hardened concrete	Determination of compressive strength of test specimens Regulated area: C – Louny – Tests		ČSN EN 12390-3; STN EN 12390-3
115	Hardened concrete	Determination of bulk density Regulated area: C – Louny – Tests		ČSN EN 12390-7; STN EN 12390-7
116	Hardened concrete	Determination of depth of penetration of water under pressure Regulated area: C – Louny – Tests		ČSN EN 12390-8; STN EN 12390-8
117	Hardened concrete	Non-destructive testing – Determination of strength and hardness by Schmidt hammer type N Regulated area: C – Louny – Tests		ČSN 73 1373, kap. 6.1, 6.2.2; ČSN EN 12504-2
118	Hardened concrete	Determination of void volume Regulated area: C – Louny – Tests		ČSN 73 6124-2, příl. A; STN 73 6124-2, příl. A
119	Vertical road signs	Measurement of the coefficient of retroreflection of retroreflective sheeting Regulated area: C – Louny – Tests		ČSN EN 12899-1, kap. 4.1.1.4
120	Hardened concrete	Determination of the thickness of a concrete pavement on cores Regulated area: C – Louny – Tests		ČSN EN 13863-3
121	Bituminous mixture	Sampling of bituminous mixture Regulated area: C – Louny – Sampling		ČSN EN 12697-27
122	Aggregate	Sampling of aggregates Regulated area: C – Louny – Sampling		ČSN EN 932-1
123	Fresh concrete	Sampling of fresh concrete Regulated area: C – Louny – Sampling		ČSN EN 12350-1
C2 – Most
124	Bituminous mixture, bituminous binder, reclaimed asphalt	Determination of PAH by GC/MS method and their sum by calculation from the measured values naphthalene phenanthrene anthracene fluoranthene pyrene benz(a)anthracene chrysene benzo(b)fluoranthene benzo(k)fluoranthene benzo(a)pyrene indeno(1,2,3-c,d)pyrene benzo(g,h,i)perylene sum of PAH by calculation from the measured values (calculated) Regulated area: C2 – Most – Tests	GC/MS method	SOP 1 (ČSN EN 17503)
D – Most
125	Bituminous mixture	Determination of soluble binder content Regulated area: D – Most – Tests		ČSN EN 12697-1
126	Bituminous mixture	Determination of particle size distribution Regulated area: D – Most – Tests		ČSN EN 12697-2+A1
127	Bituminous mixture	Determination of the maximum density Regulated area: D – Most – Tests		ČSN EN 12697-5
128	Bituminous mixture	Determination of bulk density of the specimen Regulated area: D – Most – Tests		ČSN EN 12697-6
129	Bituminous mixture	Determination of void characteristics Regulated area: D – Most – Tests		ČSN EN 12697-8
130	Bituminous mixture	Determination of the dimensions of a specimen Regulated area: D – Most – Tests		ČSN EN 12697-29
131	Bituminous mixture – finished layer	Determination of the thickness of a bituminous layer Regulated area: D – Most – Tests		ČSN EN 12697-36, mimo kap. 6.2
132	Bituminous mixture – finished layer	Determination of the degree of compaction on cores Regulated area: D – Most – Tests		ČSN 73 6160, kap. 7.2, bod a), c)
133	Aggregate	Determination of particle size distribution – Sieving method Regulated area: D – Most – Tests		ČSN EN 933-1
134	Aggregate	Determination of water content by gravimetry Regulated area: D – Most – Tests		ČSN EN 1097-5
135	Hardened concrete	Determination of the thickness of a concrete pavement on cores Regulated area: D – Most – Tests		ČSN EN 13863-3
136	Bituminous mixture – finished layer	Determination of interlayer bond strength – shear test Regulated area: D – Most – Tests		ČSN 73 6160, kap. 7.3
137	Bituminous mixture – finished layer	Determination of void content of a bituminous layer on cores Regulated area: D – Most – Tests		ČSN 73 6160, kap. 7.4
138	Aggregate	Determination of particle shape – Shape index Regulated area: D – Most – Tests		ČSN EN 933-4
139	Aggregate	Determination of particle density and water absorption Regulated area: D – Most – Tests		ČSN EN 1097-6, mimo kap. 9
140	Aggregate	Determination of particle size distribution of filler Regulated area: D – Most – Tests		ČSN EN 933-10
141	Structural layer	Static plate load test Regulated area: D – Most – Tests		ČSN 72 1006, příl. A
142	Structural layer	Dynamic load tests of pavements and subgrade Regulated area: D – Most – Tests		ČSN 73 6192, skup. C
143	Structural layer	Measurement of pavement surface unevenness with a straightedge Regulated area: D – Most – Tests		ČSN 73 6175, kap. 8; ČSN EN 13036-7
144	Structural layer	Measurement of pavement surface unevenness with a planograph Regulated area: D – Most – Tests		ČSN 73 6175, kap. 9
145	Bituminous mixture	Sampling of bituminous mixture Regulated area: D – Most – Sampling		ČSN EN 12697-27
146	Aggregate	Sampling of aggregates Regulated area: D – Most – Sampling		ČSN EN 932-1
E – Ostrava
147	Bituminous mixture	Determination of soluble binder content Regulated area: E – Ostrava – Tests		ČSN EN 12697-1
148	Bituminous mixture	Determination of particle size distribution Regulated area: E – Ostrava – Tests		ČSN EN 12697-2+A1
149	Bituminous mixture	Determination of the maximum density Regulated area: E – Ostrava – Tests		ČSN EN 12697-5
150	Bituminous mixture	Determination of bulk density of the specimen Regulated area: E – Ostrava – Tests		ČSN EN 12697-6
151	Bituminous mixture	Determination of void characteristics Regulated area: E – Ostrava – Tests		ČSN EN 12697-8
152	Bituminous mixture	Determination of the dimensions of a specimen Regulated area: E – Ostrava – Tests		ČSN EN 12697-29
153	Bituminous mixture	Determination of the indentation on cubes or Marshall specimens Regulated area: E – Ostrava – Tests		ČSN EN 12697-20
154	Bituminous mixture – finished layer	Determination of the thickness of a bituminous layer Regulated area: E – Ostrava – Tests		ČSN EN 12697-36, mimo kap. 6.2
155	Bituminous mixture – finished layer	Determination of the degree of compaction on cores Regulated area: E – Ostrava – Tests		ČSN 73 6160, kap. 7.2, bod a), c)
156	Aggregate	Determination of particle size distribution – Sieving method Regulated area: E – Ostrava – Tests		ČSN EN 933-1
157	Aggregate	Determination of water content by gravimetry Regulated area: E – Ostrava – Tests		ČSN EN 1097-5
158	Fresh concrete	Slump test Regulated area: E – Ostrava – Tests		ČSN EN 12350-2
159	Fresh concrete	Determination of bulk density Regulated area: E – Ostrava – Tests		ČSN EN 12350-6
160	Fresh concrete	Determination of air content – Pressure methods Regulated area: E – Ostrava – Tests		ČSN EN 12350-7, mimo kap. 5
161	Bituminous mixture	Sampling of bituminous mixture Regulated area: E – Ostrava – Sampling		ČSN EN 12697-27
162	Aggregate	Sampling of aggregates Regulated area: E – Ostrava – Sampling		ČSN EN 932-1
163	Fresh concrete	Sampling of fresh concrete Regulated area: E – Ostrava – Sampling		ČSN EN 12350-1
F – Měcholupy
164	Bituminous mixture	Determination of soluble binder content Regulated area: F – Měcholupy – Tests		ČSN EN 12697-1
165	Bituminous mixture	Determination of particle size distribution Regulated area: F – Měcholupy – Tests		ČSN EN 12697-2+A1
166	Bituminous mixture	Determination of the maximum density Regulated area: F – Měcholupy – Tests		ČSN EN 12697-5
167	Bituminous mixture	Determination of bulk density of the specimen Regulated area: F – Měcholupy – Tests		ČSN EN 12697-6
168	Bituminous mixture	Determination of void characteristics Regulated area: F – Měcholupy – Tests		ČSN EN 12697-8
169	Bituminous mixture	Determination of the dimensions of a specimen Regulated area: F – Měcholupy – Tests		ČSN EN 12697-29
170	Bituminous mixture – finished layer	Determination of the degree of compaction on cores Regulated area: F – Měcholupy – Tests		ČSN 73 6160, kap. 7.2, bod a), c)
171	Aggregate	Determination of particle size distribution – Sieving method Regulated area: F – Měcholupy – Tests		ČSN EN 933-1
172	Bituminous mixture – finished layer	Determination of interlayer bond strength – shear test Regulated area: F – Měcholupy – Tests		ČSN 73 6160, kap. 7.3
173	Bituminous mixture – finished layer	Determination of the thickness of a bituminous layer Regulated area: F – Měcholupy – Tests		ČSN EN 12697-36, mimo kap. 6.2
174	Bituminous mixture – finished layer	Determination of void content of a bituminous layer on cores Regulated area: F – Měcholupy – Tests		ČSN 73 6160, kap. 7.4
175	Aggregate	Determination of particle shape – Shape index Regulated area: F – Měcholupy – Tests		ČSN EN 933-4
176	Aggregate	Determination of particle density and water absorption Regulated area: F – Měcholupy – Tests		ČSN EN 1097-6, mimo kap. 9
177	Aggregate	Determination of particle size distribution of filler Regulated area: F – Měcholupy – Tests		ČSN EN 933-10
178	Aggregate	Determination of water content by gravimetry Regulated area: F – Měcholupy – Tests		ČSN EN 1097-5
179	Unbound layers, soil	Determination of bulk density Regulated area: F – Měcholupy – Tests		ČSN 72 1010, metoda A, D-1
180	Soil	Determination of particle size distribution Regulated area: F – Měcholupy – Tests		ČSN EN ISO 17892-4
181	Soil	Determination of consistency limits Regulated area: F – Měcholupy – Tests		ČSN EN ISO 17892-12
182	Soil	Determination of water content by gravimetry Regulated area: F – Měcholupy – Tests		ČSN EN ISO 17892-1
183	Soil, fill	Determination of the degree of compaction Regulated area: F – Měcholupy – Tests		ČSN 72 1006, kap. 4.2.1.1
184	Soil	Determination of the California bearing ratio, immediate bearing index and linear swelling Regulated area: F – Měcholupy – Tests		ČSN EN 13286-47
185	Unbound layers, soil	Determination of soil compactability – Proctor test Regulated area: F – Měcholupy – Tests		ČSN EN 13286-2, mimo kap. 7.3 a 7.6
186	Structural layer	Static plate load test Regulated area: F – Měcholupy – Tests		ČSN 72 1006, příl. A
187	Structural layer	Dynamic load tests of pavements and subgrade Regulated area: F – Měcholupy – Tests		ČSN 73 6192, skup. C
188	Structural layer	Measurement of pavement surface unevenness with a straightedge Regulated area: F – Měcholupy – Tests		ČSN 73 6175, kap. 8; ČSN EN 13036-7
189	Structural layer	Measurement of pavement surface unevenness with a planograph Regulated area: F – Měcholupy – Tests		ČSN 73 6175, kap. 9
190	Base layer	Determination of the indirect tensile strength of hydraulically bound mixtures Regulated area: F – Měcholupy – Tests		ČSN EN 13286-42
191	Fresh concrete	Slump test Regulated area: F – Měcholupy – Tests		ČSN EN 12350-2
192	Fresh concrete	Determination of bulk density Regulated area: F – Měcholupy – Tests		ČSN EN 12350-6
193	Fresh concrete	Determination of air content – Pressure methods Regulated area: F – Měcholupy – Tests		ČSN EN 12350-7, mimo kap. 5
194	Hardened concrete	Determination of compressive strength of test specimens Regulated area: F – Měcholupy – Tests		ČSN EN 12390-3
195	Hardened concrete	Determination of bulk density Regulated area: F – Měcholupy – Tests		ČSN EN 12390-7
196	Hardened concrete	Determination of depth of penetration of water under pressure Regulated area: F – Měcholupy – Tests		ČSN EN 12390-8
197	Hardened concrete	Determination of the thickness of a concrete pavement on cores Regulated area: F – Měcholupy – Tests		ČSN EN 13863-3
198	Bituminous mixture	Sampling of bituminous mixture Regulated area: F – Měcholupy – Sampling		ČSN EN 12697-27
199	Aggregate	Sampling of aggregates Regulated area: F – Měcholupy – Sampling		ČSN EN 932-1
200	Fresh concrete	Sampling of fresh concrete Regulated area: F – Měcholupy – Sampling		ČSN EN 12350-1
H – Podbrezová
201	Bituminous mixture	Determination of soluble binder content Regulated area: H – Podbrezová – Tests		STN EN 12697-1
202	Bituminous mixture	Determination of particle size distribution Regulated area: H – Podbrezová – Tests		STN EN 12697-2+A1
203	Bituminous mixture	Determination of the maximum density Regulated area: H – Podbrezová – Tests		STN EN 12697-5
204	Bituminous mixture	Determination of bulk density of the specimen Regulated area: H – Podbrezová – Tests		STN EN 12697-6; STN EN 12697-30
205	Bituminous mixture	Determination of void characteristics Regulated area: H – Podbrezová – Tests		STN EN 12697-8
206	Bituminous mixture	Determination of the dimensions of a specimen Regulated area: H – Podbrezová – Tests		STN EN 12697-29
207	Bituminous mixture	Determination of the water sensitivity of specimens Regulated area: H – Podbrezová – Tests		STN EN 12697-12
208	Bituminous mixture	Determination of the indirect tensile strength Regulated area: H – Podbrezová – Tests		STN EN 12697-23
209	Bituminous mixture – finished layer	Determination of the thickness of a bituminous layer Regulated area: H – Podbrezová – Tests		STN EN 12697-36, mimo kap. 6.2
210	Bituminous mixture – finished layer	Determination of the degree of compaction on cores Regulated area: H – Podbrezová – Tests		STN EN 12697-6
211	Aggregate	Determination of particle size distribution – Sieving method Regulated area: H – Podbrezová – Tests		STN EN 932-2; STN EN 933-1
212	Aggregate	Determination of particle shape – Shape index Regulated area: H – Podbrezová – Tests		STN EN 932-2; STN EN 933-4
213	Aggregate	Determination of particle density and water absorption Regulated area: H – Podbrezová – Tests		STN EN 932-2; STN EN 1097-6
214	Aggregate	Determination of water content by drying in a ventilated oven Regulated area: H – Podbrezová – Tests		STN EN 1097-5
215	Unbound layers, soil	Determination of bulk density Regulated area: H – Podbrezová – Tests		STN 72 1010, metoda D-1
216	Unbound layers, soil	Determination of soil compactability – Proctor test Regulated area: H – Podbrezová – Tests		STN EN 13286-2, mimo kap. 7.3 a 7.6; STN 72 1015
217	Structural layer	Dynamic load test of flexible pavements and subgrade Regulated area: H – Podbrezová – Tests		STN 73 6192, mimo kap. 6.2 a 6.3
218	Structural layer	Measurement of pavement surface unevenness with a straightedge Regulated area: H – Podbrezová – Tests		STN EN 13036-7
219	Structural layer	Determination of bond strength by pull-off test Regulated area: H – Podbrezová – Tests		STN 73 6242, příl. B; STN EN 1542
220	Structural layer	Static plate load test for compaction control Regulated area: H – Podbrezová – Tests		STN 73 6190
221	Structural layer	Measurement of pavement surface macrotexture depth using a volumetric patch technique Regulated area: H – Podbrezová – Tests		STN EN 13036-1
222	Base layer	Determination of the compressive strength of hydraulically bound mixtures Regulated area: H – Podbrezová – Tests		STN EN 13286-41; STN EN 13286-50; STN EN 13286-53
223	Fresh concrete	Slump test Regulated area: H – Podbrezová – Tests		STN EN 12350-2
224	Fresh concrete	Determination of bulk density Regulated area: H – Podbrezová – Tests		STN EN 12350-6
225	Fresh concrete	Determination of air content – pressure methods Regulated area: H – Podbrezová – Tests		STN EN 12350-7, mimo kap. 5
226	Hardened concrete	Non-destructive testing – Determination of strength and hardness by Schmidt hammer type N Regulated area: H – Podbrezová – Tests		STN 73 1373, kap. 6.2 a 6.3; STN EN 12504-2
227	Bituminous mixture	Sampling of bituminous mixture Regulated area: H – Podbrezová – Sampling		STN EN 12697-27
228	Aggregate	Sampling of aggregates Regulated area: H – Podbrezová – Sampling		STN EN 932-1
229	Fresh concrete	Sampling of fresh concrete Regulated area: H – Podbrezová – Sampling		STN EN 12350-1

Reference standards (147)

SOP 1

STN 72 1010, metoda D-1

STN 72 1015

STN 73 1373, kap. 6.2 a 6.3

STN 73 6124-2, příl. A

STN 73 6190

STN 73 6192, mimo kap. 6.2 a 6.3

STN 73 6242, příl. B

STN EN 1097-5

STN EN 1097-6

STN EN 12350-1

STN EN 12350-2

STN EN 12350-6

STN EN 12350-7, mimo kap. 5

STN EN 12390-1

STN EN 12390-3

STN EN 12390-7

STN EN 12390-8

STN EN 12504-2

STN EN 12593

STN EN 12697-1

STN EN 12697-11

STN EN 12697-12

STN EN 12697-2+A1

STN EN 12697-22+A1

STN EN 12697-23

STN EN 12697-27

STN EN 12697-29

STN EN 12697-30

STN EN 12697-36, mimo kap. 6.2

STN EN 12697-5

STN EN 12697-6

STN EN 12697-8

STN EN 12846-1

STN EN 12848

STN EN 12850

STN EN 13036-1

STN EN 13036-7

STN EN 13075-1

STN EN 13075-2

STN EN 13286-2, mimo kap. 7.3 a 7.6

STN EN 13286-41

STN EN 13286-50

STN EN 13286-53

STN EN 13398

STN EN 13399

STN EN 13588

STN EN 13614

STN EN 1426

STN EN 1427

STN EN 1428

STN EN 1429

STN EN 1542

STN EN 16849

STN EN 932-1

STN EN 932-2

STN EN 933-1

STN EN 933-10

STN EN 933-4

STN EN ISO 17892-12

ČSN 65 7061

ČSN 72 1006, kap. 4.2.1.1

ČSN 72 1006, příl. A

ČSN 72 1010, metoda A, D-1

ČSN 73 1373, kap. 6.1, 6.2.2

ČSN 73 6124-2, příl. A

ČSN 73 6147

ČSN 73 6160, kap. 7.2, bod a), c)

ČSN 73 6160, kap. 7.3

ČSN 73 6160, kap. 7.4

ČSN 73 6161

ČSN 73 6175, kap. 8

ČSN 73 6175, kap. 9

ČSN 73 6192, skup. C

ČSN EN 1097-5

ČSN EN 1097-6, mimo kap. 9

ČSN EN 1097-7

ČSN EN 12272-3

ČSN EN 12350-1

ČSN EN 12350-2

ČSN EN 12350-4

ČSN EN 12350-6

ČSN EN 12350-7, mimo kap. 5

ČSN EN 12390-1

ČSN EN 12390-3

ČSN EN 12390-7

ČSN EN 12390-8

ČSN EN 12504-2

ČSN EN 12592

ČSN EN 12593

ČSN EN 12607-1

ČSN EN 12697-1

ČSN EN 12697-11

ČSN EN 12697-12

ČSN EN 12697-2+A1

ČSN EN 12697-20

ČSN EN 12697-22+A1

ČSN EN 12697-23

ČSN EN 12697-27

ČSN EN 12697-29

ČSN EN 12697-36, mimo kap. 6.2

ČSN EN 12697-5

ČSN EN 12697-6

ČSN EN 12697-8

ČSN EN 12846-1

ČSN EN 12848

ČSN EN 12850

ČSN EN 12899-1, kap. 4.1.1.4

ČSN EN 13036-7

ČSN EN 13075-1

ČSN EN 13075-2

ČSN EN 13286-2, mimo kap. 7.3 a 7.6

ČSN EN 13286-41

ČSN EN 13286-42

ČSN EN 13286-47

ČSN EN 13302

ČSN EN 13303

ČSN EN 13398

ČSN EN 13399

ČSN EN 13588

ČSN EN 13589

ČSN EN 13614

ČSN EN 13863-3

ČSN EN 13880-1

ČSN EN 13880-2

ČSN EN 13880-3

ČSN EN 13880-5

ČSN EN 1426

ČSN EN 1427

ČSN EN 1428

ČSN EN 1429

ČSN EN 14769

ČSN EN 14770

ČSN EN 14771

ČSN EN 15326+A1

ČSN EN 16659

ČSN EN 16849

ČSN EN 17503

ČSN EN 17643

ČSN EN 932-1

ČSN EN 933-1

ČSN EN 933-10

ČSN EN 933-4

ČSN EN ISO 17892-1

ČSN EN ISO 17892-12

ČSN EN ISO 17892-4

ČSN EN ISO 2592

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/1263