🇨🇿 TPA ČR, s.r.o. PL
Construction
TPA ČR, s.r.o. is a laboratory accredited by ČIA under number 1181 (České Budějovice, Czech Republic). Its accreditation scope covers 366 test methods in the following areas: Construction. Test objects include: Bituminous mixtures, Aggregates, Pavement courses, Bitumen and bituminous binders.
At a glance
- Accreditation number: ČIA 1181
- Methods in scope: 366
- Types of test objects: 20
- City: České Budějovice, Czech Republic
- Valid until: 03-11-2030
- Accreditation number
- 1181
- Accreditation body
- ČIA
- Address
- Vrbenská 1821/31, 370 06 České Budějovice
- City
- České Budějovice, Czech Republic
- Division
- Laboratorium Badawcze TPA ČR
- Valid until
- 03-11-2030
What this laboratory tests (20)
- Bituminous mixtures — 69 methods
- Aggregates — 56 methods
- Pavement courses — 50 methods
- Bitumen and bituminous binders — 36 methods
- Fresh concrete — 33 methods
- Soils — 28 methods
- Hardened concrete — 27 methods
- Soils and base courses — 17 methods
- Unbound mixtures, hydraulically bound mixtures and soil — 13 methods
- Concrete and reinforced concrete structures — 10 methods
- Concrete structures and components, insulation layers — 6 methods
- Hardened concrete, road layers — 6 methods
- Concrete drainage layers — 3 methods
- Hot applied joint sealants — 3 methods
- Bituminous mixture, bituminous binder, bituminous recyclate, penetrating macadam — 2 methods
- and 5 more
Laboratory sections (7)
- Workplace No. 6 Praha — 75 methods
- Workplace No. 1 České Budějovice — 65 methods
- Workplace No. 4 Olomouc — 63 methods
- Workplace No. 5 Ostrava — 60 methods
- Workplace No. 3 Brno — 56 methods
- Workplace No. 2 Plzeň — 45 methods
- Workplace No. 7 chemical Laboratory — 2 methods
Laboratory locations
- pracownia nr 1 České Budějovice — Vrbenská 1821/31
- pracownia nr 2 Pilzno — Šlovice 122
- pracownia nr 3 Brno — Tovární 3 (areál Strabag)
- pracownia nr 4 Ołomuniec — Tovární 731
- pracownia nr 5 Ostrawa — Polanecká 827
- pracownia nr 6 Praga — Ústřední 62
- pracownia nr 7 laboratorium chemiczne — Tovární 731
Certificate information
- Certificate date
- 03.11.2025
Accreditation scope — test methods (366)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Workplace No. 1 České Budějovice | |||||
| 1 | Aggregates | Determination of particle size distribution by sieving analysis Regulated area: Tests |
ČSN EN 933-1; EN 933-1 | ||
| 2 | Aggregates | Determination of the water content by gravimetry Regulated area: Tests |
ČSN EN 1097-5; EN 1097-5 | ||
| 3 | Aggregates | Determination of particle density and water absorption by weighing Regulated area: Tests |
ČSN EN 1097-6, mimo přílohy E; EN 1097-6, mimo přílohy E; | ||
| 4 | Aggregates | Determination of particle shape - Shape index Regulated area: Tests |
ČSN EN 933-4; EN 933-4 | ||
| 5 | Aggregates | Determination of the quality of fines by methylene blue test Regulated area: Tests |
ČSN EN 933-9; EN 933-9 | ||
| 6 | Aggregates | Determination of resistance to freezing and thawing Regulated area: Tests |
ČSN EN 1367-1; EN 1367-1 | ||
| 7 | Aggregates | Assessment of fines – sand equivalent test Regulated area: Tests |
ČSN EN 933-8+A1; EN 933-8+A1 | ||
| 8 | Bitumen and bituminous binders | Determination of adhesion of bituminous binder to aggregate Regulated area: Tests |
ČSN 73 6161 | ||
| 9 | Bitumen and bituminous binders | Determination of needle penetration Regulated area: Tests |
ČSN EN 1426; EN 1426; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 10 | Bitumen and bituminous binders | Determination of softening point by ring and ball method Regulated area: Tests |
ČSN EN 1427; EN 1427; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 11 | Bitumen and bituminous binders | Determination of ductility Regulated area: Tests |
ČSN 65 7061 | ||
| 12 | Bitumen and bituminous binders | Determination of the elastic recovery Regulated area: Tests |
ČSN EN 13398; EN 13398; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 13 | Bituminous mixtures | Determination of soluble binder content Regulated area: Tests |
ČSN EN 12697-1; EN 12697-1; ČSN EN 12697-28; EN 12697-28; | ||
| 14 | Bituminous mixtures | Marshall test Regulated area: Tests |
ČSN EN 12697-34; EN 12697-34 | ||
| 15 | Bituminous mixtures | Determination of bulk density of test specimens Regulated area: Tests |
ČSN EN 12697-6; EN 12697-6; ČSN EN 12697-29; EN 12697-29; ČSN EN 12697-30; EN 12697-30 | ||
| 16 | Bituminous mixtures | Determination of absorption power on Marshall specimens Regulated area: Tests |
ČSN 73 6160, kap. 6 | ||
| 17 | Bituminous mixtures | Determination of the water sensitivity of bituminous specimen Regulated area: Tests |
ČSN EN 12697-12; EN 12697-12 | ||
| 18 | Bituminous mixtures | Determination of binder drainage – beaker method Regulated area: Tests |
ČSN EN 12697-18, čl. 1, 2, 3, 5; EN 12697-18, čl. 1, 2, 3, 5 | ||
| 19 | Bituminous mixtures | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 12697-23; EN 12697-23 | ||
| 20 | Bituminous mixtures | Determination of permanent deformation by wheel tracking Regulated area: Tests |
ČSN EN 12697-22+A1; EN 12697-22+A1 | ||
| 21 | Pavement courses | Determination of the degree of compaction of a bituminous mixtures using cored specimens Regulated area: Tests |
ČSN 73 6160, čl. 7.2 metoda a), c) | ||
| 22 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 12697-36, mimo čl. 4.4 a 6.2; EN 12697-36, mimo čl. 4.4 a 6.2 | ||
| 23 | Pavement courses | Shear test of connection of bituminous layers Regulated area: Tests |
ČSN 73 6160 čl. 7.3 | ||
| 24 | Pavement courses | Determination of compaction degree using a non-destructive method Regulated area: Tests |
ČSN 73 1375; ČSN 72 1006, Příloha F; ČSN 73 6160, čl. 7.2 metoda b) | ||
| 25 | Pavement courses | Irregularity measurement by check bar Regulated area: Tests |
ČSN 73 6175, kap. 8; ČSN EN 13036-8, mimo čl. 1.3.2 přílohy A; EN 13036-8, mimo čl. 1.3.2 přílohy A | ||
| 26 | Pavement courses | Irregularity measurement by planograph Regulated area: Tests |
ČSN 73 6175, kap. 9 | ||
| 27 | Soils | Determination of water content by gravimetry Regulated area: Tests |
ČSN EN ISO 17892-1; EN ISO 17892-1 | ||
| 28 | Soils | Determination of density of soils Regulated area: Tests |
ČSN 72 1010, metoda A, D | ||
| 29 | Unbound mixtures, hydraulically bound mixtures and soil | Determination reference bulk density and water content by Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3 a 7.6; EN 13286-2, mimo čl. 7.3 a 7.6 | ||
| 30 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, čl. 5.1-5.3; EN ISO 17892-4, čl. 5.1-5.3 | ||
| 31 | Soils | Determination of Atterberg limits Regulated area: Tests |
ČSN EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7); EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7) | ||
| 32 | Soils | Determination of relative compactness Regulated area: Tests |
ČSN 72 1018 | ||
| 33 | Soils and base courses | Impact loading test by light dynamic plate Regulated area: Tests |
ČSN 73 6192, metoda C | ||
| 34 | Soils and base courses | Static loading test Regulated area: Tests |
ČSN 73 6190; ČSN 72 1006, příloha A, B, D | ||
| 35 | Soils and base courses | Determination of California bearing ratio, immediate bearing index and linear swelling Regulated area: Tests |
ČSN EN 13286-47; EN 13286-47 | ||
| 36 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2; EN 12350-2 | ||
| 37 | Fresh concrete | Determination of air content by pressure method Regulated area: Tests |
ČSN EN 12350-7, mimo čl. 5; EN 12350-7, mimo čl. 5 | ||
| 38 | Hardened concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 12390-3; EN 12390-3; ČSN EN 12504-1, mimo čl. 6; EN 12504-1, mimo čl. 6 | ||
| 39 | Hardened concrete | Determination of density Regulated area: Tests |
ČSN EN 12390-7; EN 12390-7 | ||
| 40 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN EN 12390-8; EN 12390-8 | ||
| 41 | Hardened concrete | Determination of surface resistance to water and chemical de-icing agents Regulated area: Tests |
ČSN 73 1326, metoda A a C | ||
| 42 | Bituminous mixtures | Determination of grain size Regulated area: Tests |
ČSN EN 12697-2; EN 12697-2; ČSN EN 12697-28; EN 12697-28 | ||
| 43 | Fresh concrete | Determination of degree of compactability Regulated area: Tests |
ČSN EN 12350-4; EN 12350-4 | ||
| 44 | Fresh concrete | Determination of mass per unit volume Regulated area: Tests |
ČSN EN 12350-6; EN 12350-6; IZP č. 21 (ČSN EN 12350-6) | ||
| 45 | Hardened concrete | Determination of hardness by rebound hardness tester Regulated area: Tests |
ČSN 73 1370; ČSN 73 1373, mimo čl. 6.3 a přílohy A a B; ČSN EN 12504-2; EN 12504-2 | ||
| 46 | Concrete and reinforced concrete structures | Pile integrity measurement by PIT method Regulated area: Tests |
IZP č. 24 (manuál k zařízení PIT); ASTM D5882, čl. 6 | ||
| 47 | Aggregates | Determination of grading of fillers Regulated area: Tests |
ČSN EN 933-10; EN 933-10 | ||
| 48 | Aggregates | Determination of loose bulk density and voids of bulk material Regulated area: Tests |
ČSN EN 1097-3; EN 1097-3 | ||
| 49 | Unbound mixtures, hydraulically bound mixtures and soil | Determination of compressive strength Regulated area: Tests |
ČSN EN 13286-41; EN 13286-41 | ||
| 50 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 13863-3; EN 13863-3 | ||
| 51 | Concrete drainage layers | Determination of voids Regulated area: Tests |
ČSN 73 6124-2, příloha A | ||
| 52 | Unbound mixtures, hydraulically bound mixtures and soil | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 13286-42; EN 13286-42 | ||
| 53 | Pavement courses | Determination of pavement surface macrotexture depth using a volumetric patch technique Regulated area: Tests |
ČSN EN 13036-1; EN 13036-1 | ||
| 54 | Concrete structures and components, insulation layers | Determination of layer adhesion and tensile strength Regulated area: Tests |
ČSN 73 6242, příloha B | ||
| 55 | Concrete structures and components, insulation layers | Testing of impermeability Regulated area: Tests |
ČSN 73 6242, příloha D, E | ||
| 56 | Concrete and reinforced concrete structures | Pile integrity test by CHA method Regulated area: Tests |
IZP č. 25 (manuál k zařízení CHA); ASTM D6760, čl. 7 | ||
| 57 | Bituminous mixtures | Determination of the maximum density Regulated area: Tests |
ČSN EN 12697-5; EN 12697-5 | ||
| 58 | Bituminous mixtures | Determination of the air void content Regulated area: Tests |
ČSN EN 12697-8; EN 12697-8 | ||
| 59 | Hardened concrete | Determination of water content by gravimetry Regulated area: Tests |
TP 211, příloha 3; TP 164, příloha 2 | ||
| 60 | Pavement courses | Determination of sprayed volume by gravimetry Regulated area: Tests |
IZP č. 22 (ČSN EN 12272-1) | ||
| 61 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1; EN 12350-1 | ||
| 62 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1, čl. 8.2, 8.8, 8.9; EN 932-1, čl. 8.2, 8.8, 8.9 | ||
| 63 | Bituminous mixtures | Bituminous mixture sampling Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7; EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7 | ||
| 64 | Hardened concrete, road layers | Sampling - cored specimens Regulated area: Sampling |
ČSN EN 12504-1, čl. 6; EN 12504-1, p. 6 | ||
| 65 | Bitumen and bituminous binders | Bituminous binder sampling Regulated area: Sampling |
ČSN EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5; EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5 | ||
| Workplace No. 2 Plzeň | |||||
| 66 | Aggregates | Determination of particle size distribution by sieving analysis Regulated area: Tests |
ČSN EN 933-1; EN 933-1 | ||
| 67 | Aggregates | Determination of the water content by gravimetry Regulated area: Tests |
ČSN EN 1097-5; EN 1097-5 | ||
| 68 | Aggregates | Determination of particle density and water absorption by weighing Regulated area: Tests |
ČSN EN 1097-6, mimo přílohy E; EN 1097-6, mimo přílohy E; | ||
| 69 | Aggregates | Determination of particle shape - Shape index Regulated area: Tests |
ČSN EN 933-4; EN 933-4 | ||
| 70 | Aggregates | Determination of the quality of fines by methylene blue test Regulated area: Tests |
ČSN EN 933-9; EN 933-9 | ||
| 71 | Aggregates | Assessment of fines – sand equivalent test Regulated area: Tests |
ČSN EN 933-8+A1; EN 933-8+A1 | ||
| 72 | Bitumen and bituminous binders | Determination of adhesion of bituminous binder to aggregate Regulated area: Tests |
ČSN 73 6161 | ||
| 73 | Bitumen and bituminous binders | Determination of needle penetration Regulated area: Tests |
ČSN EN 1426; EN 1426; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 74 | Bitumen and bituminous binders | Determination of softening point by ring and ball method Regulated area: Tests |
ČSN EN 1427; EN 1427; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 75 | Bituminous mixtures | Determination of soluble binder content Regulated area: Tests |
ČSN EN 12697-1; EN 12697-1; ČSN EN 12697-28; EN 12697-28; | ||
| 76 | Bituminous mixtures | Marshall test Regulated area: Tests |
ČSN EN 12697-34; EN 12697-34 | ||
| 77 | Bituminous mixtures | Determination of bulk density of test specimens Regulated area: Tests |
ČSN EN 12697-6; EN 12697-6; ČSN EN 12697-29; EN 12697-29; ČSN EN 12697-30; EN 12697-30 | ||
| 78 | Bituminous mixtures | Determination of the water sensitivity of bituminous specimen Regulated area: Tests |
ČSN EN 12697-12; EN 12697-12 | ||
| 79 | Bituminous mixtures | Determination of binder drainage – beaker method Regulated area: Tests |
ČSN EN 12697-18, čl. 1, 2, 3, 5; EN 12697-18, čl. 1, 2, 3, 5 | ||
| 80 | Bituminous mixtures | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 12697-23; EN 12697-23 | ||
| 81 | Pavement courses | Determination of the degree of compaction of a bituminous mixtures using cored specimens Regulated area: Tests |
ČSN 73 6160, čl. 7.2 metoda a), c) | ||
| 82 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 12697-36, mimo čl. 4.4 a 6.2; EN 12697-36, mimo čl. 4.4 a 6.2 | ||
| 83 | Pavement courses | Shear test of connection of bituminous layers Regulated area: Tests |
ČSN 73 6160 čl. 7.3 | ||
| 84 | Pavement courses | Determination of compaction degree using a non-destructive method Regulated area: Tests |
ČSN 73 1375; ČSN 72 1006, Příloha F; ČSN 73 6160, čl. 7.2 metoda b) | ||
| 85 | Pavement courses | Irregularity measurement by check bar Regulated area: Tests |
ČSN 73 6175, kap. 8; ČSN EN 13036-8, mimo čl. 1.3.2 přílohy A; EN 13036-8, mimo čl. 1.3.2 přílohy A | ||
| 86 | Pavement courses | Irregularity measurement by planograph Regulated area: Tests |
ČSN 73 6175, kap. 9 | ||
| 87 | Soils | Determination of water content by gravimetry Regulated area: Tests |
ČSN EN ISO 17892-1; EN ISO 17892-1 | ||
| 88 | Soils | Determination of density of soils Regulated area: Tests |
ČSN 72 1010, metoda A, D | ||
| 89 | Unbound mixtures, hydraulically bound mixtures and soil | Determination reference bulk density and water content by Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3 a 7.6; EN 13286-2, mimo čl. 7.3 a 7.6 | ||
| 90 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, čl. 5.1-5.3; EN ISO 17892-4, čl. 5.1-5.3 | ||
| 91 | Soils | Determination of Atterberg limits Regulated area: Tests |
ČSN EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7); EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7) | ||
| 92 | Soils | Determination of relative compactness Regulated area: Tests |
ČSN 72 1018 | ||
| 93 | Soils and base courses | Impact loading test by light dynamic plate Regulated area: Tests |
ČSN 73 6192, metoda C | ||
| 94 | Soils and base courses | Static loading test Regulated area: Tests |
ČSN 73 6190; ČSN 72 1006, příloha A, B, D | ||
| 95 | Soils and base courses | Determination of California bearing ratio, immediate bearing index and linear swelling Regulated area: Tests |
ČSN EN 13286-47; EN 13286-47 | ||
| 96 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2; EN 12350-2 | ||
| 97 | Fresh concrete | Determination of air content by pressure method Regulated area: Tests |
ČSN EN 12350-7, mimo čl. 5; EN 12350-7, mimo čl. 5 | ||
| 98 | Bituminous mixtures | Determination of grain size Regulated area: Tests |
ČSN EN 12697-2; EN 12697-2; ČSN EN 12697-28; EN 12697-28 | ||
| 99 | Fresh concrete | Determination of degree of compactability Regulated area: Tests |
ČSN EN 12350-4; EN 12350-4 | ||
| 100 | Fresh concrete | Determination of mass per unit volume Regulated area: Tests |
ČSN EN 12350-6; EN 12350-6; IZP č. 21 (ČSN EN 12350-6) | ||
| 101 | Aggregates | Determination of grading of fillers Regulated area: Tests |
ČSN EN 933-10; EN 933-10 | ||
| 102 | Bituminous mixtures | Determination of the maximum density Regulated area: Tests |
ČSN EN 12697-5; EN 12697-5 | ||
| 103 | Bituminous mixtures | Determination of the air void content Regulated area: Tests |
ČSN EN 12697-8; EN 12697-8 | ||
| 104 | Pavement courses | Determination of sprayed volume by gravimetry Regulated area: Tests |
IZP č. 22 (ČSN EN 12272-1) | ||
| 105 | Bituminous mixtures | Asphalt binder analysis by ignition method Regulated area: Tests |
ČSN EN 12697-39; EN 12697-39 | ||
| 106 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1; EN 12350-1 | ||
| 107 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1, čl. 8.2, 8.8, 8.9; EN 932-1, čl. 8.2, 8.8, 8.9 | ||
| 108 | Bituminous mixtures | Bituminous mixture sampling Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7; EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7 | ||
| 109 | Hardened concrete, road layers | Sampling - cored specimens Regulated area: Sampling |
ČSN EN 12504-1, čl. 6; EN 12504-1, p. 6 | ||
| 110 | Bitumen and bituminous binders | Bituminous binder sampling Regulated area: Sampling |
ČSN EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5; EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5 | ||
| Workplace No. 3 Brno | |||||
| 111 | Aggregates | Determination of particle size distribution by sieving analysis Regulated area: Tests |
ČSN EN 933-1; EN 933-1 | ||
| 112 | Aggregates | Determination of the water content by gravimetry Regulated area: Tests |
ČSN EN 1097-5; EN 1097-5 | ||
| 113 | Aggregates | Determination of particle density and water absorption by weighing Regulated area: Tests |
ČSN EN 1097-6, mimo přílohy E; EN 1097-6, mimo přílohy E; | ||
| 114 | Aggregates | Determination of particle shape - Shape index Regulated area: Tests |
ČSN EN 933-4; EN 933-4 | ||
| 115 | Aggregates | Delta ring and ball test (determination of the stiffening effect of filler) Regulated area: Tests |
ČSN EN 13179-1; EN 13179-1 | ||
| 116 | Aggregates | Determination of the quality of fines by methylene blue test Regulated area: Tests |
ČSN EN 933-9; EN 933-9 | ||
| 117 | Aggregates | Assessment of fines – sand equivalent test Regulated area: Tests |
ČSN EN 933-8+A1; EN 933-8+A1 | ||
| 118 | Bitumen and bituminous binders | Determination of adhesion of bituminous binder to aggregate Regulated area: Tests |
ČSN 73 6161 | ||
| 119 | Bitumen and bituminous binders | Determination of needle penetration Regulated area: Tests |
ČSN EN 1426; EN 1426; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 120 | Bitumen and bituminous binders | Determination of softening point by ring and ball method Regulated area: Tests |
ČSN EN 1427; EN 1427; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 121 | Bitumen and bituminous binders | Determination of ductility Regulated area: Tests |
ČSN 65 7061 | ||
| 122 | Bitumen and bituminous binders | Determination of Fraass breaking point Regulated area: Tests |
ČSN EN 12593; EN 12593 | ||
| 123 | Bitumen and bituminous binders | Determination of the elastic recovery Regulated area: Tests |
ČSN EN 13398; EN 13398; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 124 | Bituminous mixtures | Determination of soluble binder content Regulated area: Tests |
ČSN EN 12697-1; EN 12697-1; ČSN EN 12697-28; EN 12697-28; | ||
| 125 | Bituminous mixtures | Marshall test Regulated area: Tests |
ČSN EN 12697-34; EN 12697-34 | ||
| 126 | Bituminous mixtures | Determination of bulk density of test specimens Regulated area: Tests |
ČSN EN 12697-6; EN 12697-6; ČSN EN 12697-29; EN 12697-29; ČSN EN 12697-30; EN 12697-30 | ||
| 127 | Bituminous mixtures | Determination of the water sensitivity of bituminous specimen Regulated area: Tests |
ČSN EN 12697-12; EN 12697-12 | ||
| 128 | Bituminous mixtures | Determination of binder drainage – beaker method Regulated area: Tests |
ČSN EN 12697-18, čl. 1, 2, 3, 5; EN 12697-18, čl. 1, 2, 3, 5 | ||
| 129 | Bituminous mixtures | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 12697-23; EN 12697-23 | ||
| 130 | Bituminous mixtures | Determination of hardness number using cube or cylindrical test specimens Regulated area: Tests |
ČSN EN 12697-20; EN 12697-20 | ||
| 131 | Pavement courses | Determination of the degree of compaction of a bituminous mixtures using cored specimens Regulated area: Tests |
ČSN 73 6160, čl. 7.2 metoda a), c) | ||
| 132 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 12697-36, mimo čl. 4.4 a 6.2; EN 12697-36, mimo čl. 4.4 a 6.2 | ||
| 133 | Pavement courses | Shear test of connection of bituminous layers Regulated area: Tests |
ČSN 73 6160 čl. 7.3 | ||
| 134 | Pavement courses | Determination of compaction degree using a non-destructive method Regulated area: Tests |
ČSN 73 1375; ČSN 72 1006, Příloha F; ČSN 73 6160, čl. 7.2 metoda b) | ||
| 135 | Pavement courses | Irregularity measurement by check bar Regulated area: Tests |
ČSN 73 6175, kap. 8; ČSN EN 13036-8, mimo čl. 1.3.2 přílohy A; EN 13036-8, mimo čl. 1.3.2 přílohy A | ||
| 136 | Pavement courses | Irregularity measurement by planograph Regulated area: Tests |
ČSN 73 6175, kap. 9 | ||
| 137 | Soils | Determination of water content by gravimetry Regulated area: Tests |
ČSN EN ISO 17892-1; EN ISO 17892-1 | ||
| 138 | Soils | Determination of density of soils Regulated area: Tests |
ČSN 72 1010, metoda A, D | ||
| 139 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, čl. 5.1-5.3; EN ISO 17892-4, čl. 5.1-5.3 | ||
| 140 | Soils | Determination of Atterberg limits Regulated area: Tests |
ČSN EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7); EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7) | ||
| 141 | Soils and base courses | Impact loading test by light dynamic plate Regulated area: Tests |
ČSN 73 6192, metoda C | ||
| 142 | Soils and base courses | Static loading test Regulated area: Tests |
ČSN 73 6190; ČSN 72 1006, příloha A, B, D | ||
| 143 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2; EN 12350-2 | ||
| 144 | Fresh concrete | Determination of air content by pressure method Regulated area: Tests |
ČSN EN 12350-7, mimo čl. 5; EN 12350-7, mimo čl. 5 | ||
| 145 | Bituminous mixtures | Determination of grain size Regulated area: Tests |
ČSN EN 12697-2; EN 12697-2; ČSN EN 12697-28; EN 12697-28 | ||
| 146 | Fresh concrete | Determination of degree of compactability Regulated area: Tests |
ČSN EN 12350-4; EN 12350-4 | ||
| 147 | Fresh concrete | Determination of mass per unit volume Regulated area: Tests |
ČSN EN 12350-6; EN 12350-6; IZP č. 21 (ČSN EN 12350-6) | ||
| 148 | Bitumen and bituminous binders | Determination of storage stability Regulated area: Tests |
ČSN EN 13399; EN 13399 | ||
| 149 | Aggregates | Determination of grading of fillers Regulated area: Tests |
ČSN EN 933-10; EN 933-10 | ||
| 150 | Aggregates | Determination of loose bulk density and voids of bulk material Regulated area: Tests |
ČSN EN 1097-3; EN 1097-3 | ||
| 151 | Pavement courses | Measurement of slip/skid resistance of a surface using a pendulum Regulated area: Tests |
ČSN EN 13036-4; EN 13036-4 | ||
| 152 | Concrete structures and components, insulation layers | Determination of layer adhesion and tensile strength Regulated area: Tests |
ČSN 73 6242, příloha B | ||
| 153 | Bituminous mixtures | Determination of the maximum density Regulated area: Tests |
ČSN EN 12697-5; EN 12697-5 | ||
| 154 | Bituminous mixtures | Determination of the air void content Regulated area: Tests |
ČSN EN 12697-8; EN 12697-8 | ||
| 155 | Pavement courses | Determination of sprayed volume by gravimetry Regulated area: Tests |
IZP č. 22 (ČSN EN 12272-1) | ||
| 156 | Bitumen and bituminous binders | Determination of complex shear modulus and phase angle by Dynamic Shear Rheometer (DSR) Regulated area: Tests |
ČSN EN 14770; EN 14770 | ||
| 157 | Bitumen and bituminous binders | MSCR Test Regulated area: Tests |
ČSN EN 16659; EN 16659 | ||
| 158 | Bitumen and bituminous binders | Determination of dynamic viscosity by the cone and plate method Regulated area: Tests |
ČSN EN 13702; EN 13702 | ||
| 159 | Bitumen and bituminous binders | Determination of the resistance to hardening under influence of heat and air by RTFOT method Regulated area: Tests |
ČSN EN 12607-1; EN 12607-1 | ||
| 160 | Bitumen and bituminous binders | Determination of solubility Regulated area: Tests |
ČSN EN 12592; EN 12592 | ||
| 161 | Aggregates | Determination of bulk density and water absorption by pycnometry Regulated area: Tests |
ČSN EN 1097-7; EN 1097-7 | ||
| 162 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1; EN 12350-1 | ||
| 163 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1, čl. 8.2, 8.8, 8.9; EN 932-1, čl. 8.2, 8.8, 8.9 | ||
| 164 | Bituminous mixtures | Bituminous mixture sampling Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7; EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7 | ||
| 165 | Hardened concrete, road layers | Sampling - cored specimens Regulated area: Sampling |
ČSN EN 12504-1, čl. 6; EN 12504-1, p. 6 | ||
| 166 | Bitumen and bituminous binders | Bituminous binder sampling Regulated area: Sampling |
ČSN EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5; EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5 | ||
| Workplace No. 4 Olomouc | |||||
| 167 | Aggregates | Determination of particle size distribution by sieving analysis Regulated area: Tests |
ČSN EN 933-1; EN 933-1 | ||
| 168 | Aggregates | Determination of the water content by gravimetry Regulated area: Tests |
ČSN EN 1097-5; EN 1097-5 | ||
| 169 | Aggregates | Determination of particle density and water absorption by weighing Regulated area: Tests |
ČSN EN 1097-6, mimo přílohy E; EN 1097-6, mimo přílohy E; | ||
| 170 | Aggregates | Determination of particle shape - Shape index Regulated area: Tests |
ČSN EN 933-4; EN 933-4 | ||
| 171 | Aggregates | Determination of the quality of fines by methylene blue test Regulated area: Tests |
ČSN EN 933-9; EN 933-9 | ||
| 172 | Aggregates | Determination of resistance to fragmentation Regulated area: Tests |
ČSN EN 1097-2, mimo čl. 6; EN 1097-2, mimo čl. 6 | ||
| 173 | Aggregates | Determination of resistance to freezing and thawing Regulated area: Tests |
ČSN EN 1367-1; EN 1367-1 | ||
| 174 | Bitumen and bituminous binders | Determination of adhesion of bituminous binder to aggregate Regulated area: Tests |
ČSN 73 6161 | ||
| 175 | Bitumen and bituminous binders | Determination of needle penetration Regulated area: Tests |
ČSN EN 1426; EN 1426; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 176 | Bitumen and bituminous binders | Determination of softening point by ring and ball method Regulated area: Tests |
ČSN EN 1427; EN 1427; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 177 | Bituminous mixtures | Determination of soluble binder content Regulated area: Tests |
ČSN EN 12697-1; EN 12697-1; ČSN EN 12697-28; EN 12697-28; | ||
| 178 | Bituminous mixtures | Marshall test Regulated area: Tests |
ČSN EN 12697-34; EN 12697-34 | ||
| 179 | Bituminous mixtures | Determination of bulk density of test specimens Regulated area: Tests |
ČSN EN 12697-6; EN 12697-6; ČSN EN 12697-29; EN 12697-29; ČSN EN 12697-30; EN 12697-30 | ||
| 180 | Bituminous mixtures | Determination of absorption power on Marshall specimens Regulated area: Tests |
ČSN 73 6160, kap. 6 | ||
| 181 | Bituminous mixtures | Determination of the water sensitivity of bituminous specimen Regulated area: Tests |
ČSN EN 12697-12; EN 12697-12 | ||
| 182 | Bituminous mixtures | Determination of binder drainage – beaker method Regulated area: Tests |
ČSN EN 12697-18, čl. 1, 2, 3, 5; EN 12697-18, čl. 1, 2, 3, 5 | ||
| 183 | Bituminous mixtures | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 12697-23; EN 12697-23 | ||
| 184 | Bituminous mixtures | Determination of permanent deformation by wheel tracking Regulated area: Tests |
ČSN EN 12697-22+A1; EN 12697-22+A1 | ||
| 185 | Pavement courses | Determination of the degree of compaction of a bituminous mixtures using cored specimens Regulated area: Tests |
ČSN 73 6160, čl. 7.2 metoda a), c) | ||
| 186 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 12697-36, mimo čl. 4.4 a 6.2; EN 12697-36, mimo čl. 4.4 a 6.2 | ||
| 187 | Pavement courses | Shear test of connection of bituminous layers Regulated area: Tests |
ČSN 73 6160 čl. 7.3 | ||
| 188 | Pavement courses | Determination of compaction degree using a non-destructive method Regulated area: Tests |
ČSN 73 1375; ČSN 72 1006, Příloha F; ČSN 73 6160, čl. 7.2 metoda b) | ||
| 189 | Pavement courses | Irregularity measurement by check bar Regulated area: Tests |
ČSN 73 6175, kap. 8; ČSN EN 13036-8, mimo čl. 1.3.2 přílohy A; EN 13036-8, mimo čl. 1.3.2 přílohy A | ||
| 190 | Soils | Determination of water content by gravimetry Regulated area: Tests |
ČSN EN ISO 17892-1; EN ISO 17892-1 | ||
| 191 | Soils | Determination of density of soils Regulated area: Tests |
ČSN 72 1010, metoda A, D | ||
| 192 | Unbound mixtures, hydraulically bound mixtures and soil | Determination reference bulk density and water content by Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3 a 7.6; EN 13286-2, mimo čl. 7.3 a 7.6 | ||
| 193 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, čl. 5.1-5.3; EN ISO 17892-4, čl. 5.1-5.3 | ||
| 194 | Soils | Determination of Atterberg limits Regulated area: Tests |
ČSN EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7); EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7) | ||
| 195 | Soils | Determination of relative compactness Regulated area: Tests |
ČSN 72 1018 | ||
| 196 | Soils and base courses | Impact loading test by light dynamic plate Regulated area: Tests |
ČSN 73 6192, metoda C | ||
| 197 | Soils and base courses | Static loading test Regulated area: Tests |
ČSN 73 6190; ČSN 72 1006, příloha A, B, D | ||
| 198 | Soils and base courses | Determination of California bearing ratio, immediate bearing index and linear swelling Regulated area: Tests |
ČSN EN 13286-47; EN 13286-47 | ||
| 199 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2; EN 12350-2 | ||
| 200 | Fresh concrete | Flow test Regulated area: Tests |
ČSN EN 12350-5; EN 12350-5 | ||
| 201 | Fresh concrete | Determination of air content by pressure method Regulated area: Tests |
ČSN EN 12350-7, mimo čl. 5; EN 12350-7, mimo čl. 5 | ||
| 202 | Hardened concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 12390-3; EN 12390-3; ČSN EN 12504-1, mimo čl. 6; EN 12504-1, mimo čl. 6 | ||
| 203 | Hardened concrete | Determination of flexural strength of test specimens Regulated area: Tests |
ČSN EN 12390-5; EN 12390-5 | ||
| 204 | Hardened concrete | Determination of density Regulated area: Tests |
ČSN EN 12390-7; EN 12390-7 | ||
| 205 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN EN 12390-8; EN 12390-8 | ||
| 206 | Hardened concrete | Determination of surface resistance to water and chemical de-icing agents Regulated area: Tests |
ČSN 73 1326, metoda A a C | ||
| 207 | Bituminous mixtures | Determination of grain size Regulated area: Tests |
ČSN EN 12697-2; EN 12697-2; ČSN EN 12697-28; EN 12697-28 | ||
| 208 | Fresh concrete | Determination of degree of compactability Regulated area: Tests |
ČSN EN 12350-4; EN 12350-4 | ||
| 209 | Fresh concrete | Determination of mass per unit volume Regulated area: Tests |
ČSN EN 12350-6; EN 12350-6; IZP č. 21 (ČSN EN 12350-6) | ||
| 210 | Concrete and reinforced concrete structures | Pile integrity measurement by PIT method Regulated area: Tests |
IZP č. 24 (manuál k zařízení PIT); ASTM D5882, čl. 6 | ||
| 211 | Bitumen and bituminous binders | Determination of storage stability Regulated area: Tests |
ČSN EN 13399; EN 13399 | ||
| 212 | Aggregates | Determination of grading of fillers Regulated area: Tests |
ČSN EN 933-10; EN 933-10 | ||
| 213 | Unbound mixtures, hydraulically bound mixtures and soil | Determination of compressive strength Regulated area: Tests |
ČSN EN 13286-41; EN 13286-41 | ||
| 214 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 13863-3; EN 13863-3 | ||
| 215 | Hydraulically bound mixtures | Determination of resistance to frost and water Regulated area: Tests |
ČSN 73 6124-1, příloha A | ||
| 216 | Unbound mixtures, hydraulically bound mixtures and soil | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 13286-42; EN 13286-42 | ||
| 217 | Concrete structures and components, insulation layers | Determination of layer adhesion and tensile strength Regulated area: Tests |
ČSN 73 6242, příloha B | ||
| 218 | Concrete and reinforced concrete structures | Pile integrity test by CHA method Regulated area: Tests |
IZP č. 25 (manuál k zařízení CHA); ASTM D6760, čl. 7 | ||
| 219 | Bituminous mixtures | Determination of the maximum density Regulated area: Tests |
ČSN EN 12697-5; EN 12697-5 | ||
| 220 | Bituminous mixtures | Determination of the air void content Regulated area: Tests |
ČSN EN 12697-8; EN 12697-8 | ||
| 221 | Pavement courses | Determination of sprayed volume by gravimetry Regulated area: Tests |
IZP č. 22 (ČSN EN 12272-1) | ||
| 222 | Mortars | Determination of density Regulated area: Tests |
ČSN EN 1015-10; EN 1015-10 | ||
| 223 | Mortars, screed materials | Determination of flexural strength and compressive strength Regulated area: Tests |
ČSN EN 1015-11; EN 1015-11; ČSN EN 13892-2; EN 13892-2 | ||
| 224 | Concrete and reinforced concrete structures | Determination of protection of surface layer steel reinforcement Regulated area: Tests |
ČSN 73 2011, příloha A | ||
| 225 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1; EN 12350-1 | ||
| 226 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1, čl. 8.2, 8.8, 8.9; EN 932-1, čl. 8.2, 8.8, 8.9 | ||
| 227 | Bituminous mixtures | Bituminous mixture sampling Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7; EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7 | ||
| 228 | Hardened concrete, road layers | Sampling - cored specimens Regulated area: Sampling |
ČSN EN 12504-1, čl. 6; EN 12504-1, p. 6 | ||
| 229 | Bitumen and bituminous binders | Bituminous binder sampling Regulated area: Sampling |
ČSN EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5; EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5 | ||
| Workplace No. 5 Ostrava | |||||
| 230 | Aggregates | Determination of particle size distribution by sieving analysis Regulated area: Tests |
ČSN EN 933-1; EN 933-1 | ||
| 231 | Aggregates | Determination of the water content by gravimetry Regulated area: Tests |
ČSN EN 1097-5; EN 1097-5 | ||
| 232 | Aggregates | Determination of particle density and water absorption by weighing Regulated area: Tests |
ČSN EN 1097-6, mimo přílohy E; EN 1097-6, mimo přílohy E; | ||
| 233 | Aggregates | Determination of particle shape - Shape index Regulated area: Tests |
ČSN EN 933-4; EN 933-4 | ||
| 234 | Aggregates | Determination of the quality of fines by methylene blue test Regulated area: Tests |
ČSN EN 933-9; EN 933-9 | ||
| 235 | Aggregates | Assessment of fines – sand equivalent test Regulated area: Tests |
ČSN EN 933-8+A1; EN 933-8+A1 | ||
| 236 | Bitumen and bituminous binders | Determination of adhesion of bituminous binder to aggregate Regulated area: Tests |
ČSN 73 6161 | ||
| 237 | Bitumen and bituminous binders | Determination of needle penetration Regulated area: Tests |
ČSN EN 1426; EN 1426; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 238 | Bitumen and bituminous binders | Determination of softening point by ring and ball method Regulated area: Tests |
ČSN EN 1427; EN 1427; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 239 | Bituminous mixtures | Determination of soluble binder content Regulated area: Tests |
ČSN EN 12697-1; EN 12697-1; ČSN EN 12697-28; EN 12697-28; | ||
| 240 | Bituminous mixtures | Marshall test Regulated area: Tests |
ČSN EN 12697-34; EN 12697-34 | ||
| 241 | Bituminous mixtures | Determination of bulk density of test specimens Regulated area: Tests |
ČSN EN 12697-6; EN 12697-6; ČSN EN 12697-29; EN 12697-29; ČSN EN 12697-30; EN 12697-30 | ||
| 242 | Bituminous mixtures | Determination of absorption power on Marshall specimens Regulated area: Tests |
ČSN 73 6160, kap. 6 | ||
| 243 | Bituminous mixtures | Determination of the water sensitivity of bituminous specimen Regulated area: Tests |
ČSN EN 12697-12; EN 12697-12 | ||
| 244 | Bituminous mixtures | Determination of binder drainage – beaker method Regulated area: Tests |
ČSN EN 12697-18, čl. 1, 2, 3, 5; EN 12697-18, čl. 1, 2, 3, 5 | ||
| 245 | Bituminous mixtures | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 12697-23; EN 12697-23 | ||
| 246 | Pavement courses | Determination of the degree of compaction of a bituminous mixtures using cored specimens Regulated area: Tests |
ČSN 73 6160, čl. 7.2 metoda a), c) | ||
| 247 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 12697-36, mimo čl. 4.4 a 6.2; EN 12697-36, mimo čl. 4.4 a 6.2 | ||
| 248 | Pavement courses | Shear test of connection of bituminous layers Regulated area: Tests |
ČSN 73 6160 čl. 7.3 | ||
| 249 | Pavement courses | Determination of compaction degree using a non-destructive method Regulated area: Tests |
ČSN 73 1375; ČSN 72 1006, Příloha F; ČSN 73 6160, čl. 7.2 metoda b) | ||
| 250 | Pavement courses | Irregularity measurement by check bar Regulated area: Tests |
ČSN 73 6175, kap. 8; ČSN EN 13036-8, mimo čl. 1.3.2 přílohy A; EN 13036-8, mimo čl. 1.3.2 přílohy A | ||
| 251 | Pavement courses | Irregularity measurement by planograph Regulated area: Tests |
ČSN 73 6175, kap. 9 | ||
| 252 | Soils | Determination of water content by gravimetry Regulated area: Tests |
ČSN EN ISO 17892-1; EN ISO 17892-1 | ||
| 253 | Soils | Determination of density of soils Regulated area: Tests |
ČSN 72 1010, metoda A, D | ||
| 254 | Unbound mixtures, hydraulically bound mixtures and soil | Determination reference bulk density and water content by Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3 a 7.6; EN 13286-2, mimo čl. 7.3 a 7.6 | ||
| 255 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, čl. 5.1-5.3; EN ISO 17892-4, čl. 5.1-5.3 | ||
| 256 | Soils | Determination of Atterberg limits Regulated area: Tests |
ČSN EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7); EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7) | ||
| 257 | Soils and base courses | Impact loading test by light dynamic plate Regulated area: Tests |
ČSN 73 6192, metoda C | ||
| 258 | Soils and base courses | Static loading test Regulated area: Tests |
ČSN 73 6190; ČSN 72 1006, příloha A, B, D | ||
| 259 | Soils and base courses | Determination of California bearing ratio, immediate bearing index and linear swelling Regulated area: Tests |
ČSN EN 13286-47; EN 13286-47 | ||
| 260 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2; EN 12350-2 | ||
| 261 | Fresh concrete | Determination of air content by pressure method Regulated area: Tests |
ČSN EN 12350-7, mimo čl. 5; EN 12350-7, mimo čl. 5 | ||
| 262 | Hardened concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 12390-3; EN 12390-3; ČSN EN 12504-1, mimo čl. 6; EN 12504-1, mimo čl. 6 | ||
| 263 | Hardened concrete | Determination of flexural strength of test specimens Regulated area: Tests |
ČSN EN 12390-5; EN 12390-5 | ||
| 264 | Hardened concrete | Determination of density Regulated area: Tests |
ČSN EN 12390-7; EN 12390-7 | ||
| 265 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN EN 12390-8; EN 12390-8 | ||
| 266 | Hardened concrete | Determination of surface resistance to water and chemical de-icing agents Regulated area: Tests |
ČSN 73 1326, metoda A a C | ||
| 267 | Bituminous mixtures | Determination of grain size Regulated area: Tests |
ČSN EN 12697-2; EN 12697-2; ČSN EN 12697-28; EN 12697-28 | ||
| 268 | Fresh concrete | Determination of degree of compactability Regulated area: Tests |
ČSN EN 12350-4; EN 12350-4 | ||
| 269 | Fresh concrete | Determination of mass per unit volume Regulated area: Tests |
ČSN EN 12350-6; EN 12350-6; IZP č. 21 (ČSN EN 12350-6) | ||
| 270 | Hardened concrete | Determination of hardness by rebound hardness tester Regulated area: Tests |
ČSN 73 1370; ČSN 73 1373, mimo čl. 6.3 a přílohy A a B; ČSN EN 12504-2; EN 12504-2 | ||
| 271 | Concrete and reinforced concrete structures | Pile integrity measurement by PIT method Regulated area: Tests |
IZP č. 24 (manuál k zařízení PIT); ASTM D5882, čl. 6 | ||
| 272 | Aggregates | Determination of grading of fillers Regulated area: Tests |
ČSN EN 933-10; EN 933-10 | ||
| 273 | Aggregates | Determination of loose bulk density and voids of bulk material Regulated area: Tests |
ČSN EN 1097-3; EN 1097-3 | ||
| 274 | Unbound mixtures, hydraulically bound mixtures and soil | Determination of compressive strength Regulated area: Tests |
ČSN EN 13286-41; EN 13286-41 | ||
| 275 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 13863-3; EN 13863-3 | ||
| 276 | Concrete drainage layers | Determination of voids Regulated area: Tests |
ČSN 73 6124-2, příloha A | ||
| 277 | Unbound mixtures, hydraulically bound mixtures and soil | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 13286-42; EN 13286-42 | ||
| 278 | Pavement courses | Determination of pavement surface macrotexture depth using a volumetric patch technique Regulated area: Tests |
ČSN EN 13036-1; EN 13036-1 | ||
| 279 | Concrete structures and components, insulation layers | Determination of layer adhesion and tensile strength Regulated area: Tests |
ČSN 73 6242, příloha B | ||
| 280 | Concrete and reinforced concrete structures | Pile integrity test by CHA method Regulated area: Tests |
IZP č. 25 (manuál k zařízení CHA); ASTM D6760, čl. 7 | ||
| 281 | Bituminous mixtures | Determination of the maximum density Regulated area: Tests |
ČSN EN 12697-5; EN 12697-5 | ||
| 282 | Bituminous mixtures | Determination of the air void content Regulated area: Tests |
ČSN EN 12697-8; EN 12697-8 | ||
| 283 | Pavement courses | Determination of sprayed volume by gravimetry Regulated area: Tests |
IZP č. 22 (ČSN EN 12272-1) | ||
| 284 | Concrete and reinforced concrete structures | Determination of protection of surface layer steel reinforcement Regulated area: Tests |
ČSN 73 2011, příloha A | ||
| 285 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1; EN 12350-1 | ||
| 286 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1, čl. 8.2, 8.8, 8.9; EN 932-1, čl. 8.2, 8.8, 8.9 | ||
| 287 | Bituminous mixtures | Bituminous mixture sampling Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7; EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7 | ||
| 288 | Hardened concrete, road layers | Sampling - cored specimens Regulated area: Sampling |
ČSN EN 12504-1, čl. 6; EN 12504-1, p. 6 | ||
| 289 | Bitumen and bituminous binders | Bituminous binder sampling Regulated area: Sampling |
ČSN EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5; EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5 | ||
| Workplace No. 6 Praha | |||||
| 290 | Aggregates | Determination of particle size distribution by sieving analysis Regulated area: Tests |
ČSN EN 933-1; EN 933-1 | ||
| 291 | Aggregates | Determination of the water content by gravimetry Regulated area: Tests |
ČSN EN 1097-5; EN 1097-5 | ||
| 292 | Aggregates | Determination of particle density and water absorption by weighing Regulated area: Tests |
ČSN EN 1097-6, mimo přílohy E; EN 1097-6, mimo přílohy E; | ||
| 293 | Aggregates | Determination of particle shape - Shape index Regulated area: Tests |
ČSN EN 933-4; EN 933-4 | ||
| 294 | Aggregates | Determination of the quality of fines by methylene blue test Regulated area: Tests |
ČSN EN 933-9; EN 933-9 | ||
| 295 | Aggregates | Assessment of fines – sand equivalent test Regulated area: Tests |
ČSN EN 933-8+A1; EN 933-8+A1 | ||
| 296 | Bitumen and bituminous binders | Determination of adhesion of bituminous binder to aggregate Regulated area: Tests |
ČSN 73 6161 | ||
| 297 | Bitumen and bituminous binders | Determination of needle penetration Regulated area: Tests |
ČSN EN 1426; EN 1426; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 298 | Bitumen and bituminous binders | Determination of softening point by ring and ball method Regulated area: Tests |
ČSN EN 1427; EN 1427; ČSN EN 12697-3+A1; EN 12697-3+A1 | ||
| 299 | Bituminous mixtures | Determination of soluble binder content Regulated area: Tests |
ČSN EN 12697-1; EN 12697-1; ČSN EN 12697-28; EN 12697-28; | ||
| 300 | Bituminous mixtures | Marshall test Regulated area: Tests |
ČSN EN 12697-34; EN 12697-34 | ||
| 301 | Bituminous mixtures | Determination of bulk density of test specimens Regulated area: Tests |
ČSN EN 12697-6; EN 12697-6; ČSN EN 12697-29; EN 12697-29; ČSN EN 12697-30; EN 12697-30 | ||
| 302 | Bituminous mixtures | Determination of absorption power on Marshall specimens Regulated area: Tests |
ČSN 73 6160, kap. 6 | ||
| 303 | Bituminous mixtures | Determination of the water sensitivity of bituminous specimen Regulated area: Tests |
ČSN EN 12697-12; EN 12697-12 | ||
| 304 | Bituminous mixtures | Determination of binder drainage – beaker method Regulated area: Tests |
ČSN EN 12697-18, čl. 1, 2, 3, 5; EN 12697-18, čl. 1, 2, 3, 5 | ||
| 305 | Bituminous mixtures | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 12697-23; EN 12697-23 | ||
| 306 | Bituminous mixtures | Determination of permanent deformation by wheel tracking Regulated area: Tests |
ČSN EN 12697-22+A1; EN 12697-22+A1 | ||
| 307 | Pavement courses | Determination of the degree of compaction of a bituminous mixtures using cored specimens Regulated area: Tests |
ČSN 73 6160, čl. 7.2 metoda a), c) | ||
| 308 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 12697-36, mimo čl. 4.4 a 6.2; EN 12697-36, mimo čl. 4.4 a 6.2 | ||
| 309 | Pavement courses | Shear test of connection of bituminous layers Regulated area: Tests |
ČSN 73 6160 čl. 7.3 | ||
| 310 | Pavement courses | Determination of compaction degree using a non-destructive method Regulated area: Tests |
ČSN 73 1375; ČSN 72 1006, Příloha F; ČSN 73 6160, čl. 7.2 metoda b) | ||
| 311 | Pavement courses | Irregularity measurement by check bar Regulated area: Tests |
ČSN 73 6175, kap. 8; ČSN EN 13036-8, mimo čl. 1.3.2 přílohy A; EN 13036-8, mimo čl. 1.3.2 přílohy A | ||
| 312 | Pavement courses | Irregularity measurement by planograph Regulated area: Tests |
ČSN 73 6175, kap. 9 | ||
| 313 | Soils | Determination of water content by gravimetry Regulated area: Tests |
ČSN EN ISO 17892-1; EN ISO 17892-1 | ||
| 314 | Soils | Determination of density of soils Regulated area: Tests |
ČSN 72 1010, metoda A, D | ||
| 315 | Unbound mixtures, hydraulically bound mixtures and soil | Determination reference bulk density and water content by Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3 a 7.6; EN 13286-2, mimo čl. 7.3 a 7.6 | ||
| 316 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, čl. 5.1-5.3; EN ISO 17892-4, čl. 5.1-5.3 | ||
| 317 | Soils | Determination of Atterberg limits Regulated area: Tests |
ČSN EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7); EN ISO 17892-12 (mimo čl. 4.3, 5.4, 6.3 a A.3.7) | ||
| 318 | Soils | Determination of relative compactness Regulated area: Tests |
ČSN 72 1018 | ||
| 319 | Soils and base courses | Impact loading test by light dynamic plate Regulated area: Tests |
ČSN 73 6192, metoda C | ||
| 320 | Soils and base courses | Static loading test Regulated area: Tests |
ČSN 73 6190; ČSN 72 1006, příloha A, B, D | ||
| 321 | Soils and base courses | Determination of California bearing ratio, immediate bearing index and linear swelling Regulated area: Tests |
ČSN EN 13286-47; EN 13286-47 | ||
| 322 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2; EN 12350-2 | ||
| 323 | Fresh concrete | Flow test Regulated area: Tests |
ČSN EN 12350-5; EN 12350-5 | ||
| 324 | Fresh concrete | Determination of air content by pressure method Regulated area: Tests |
ČSN EN 12350-7, mimo čl. 5; EN 12350-7, mimo čl. 5 | ||
| 325 | Hardened concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 12390-3; EN 12390-3; ČSN EN 12504-1, mimo čl. 6; EN 12504-1, mimo čl. 6 | ||
| 326 | Hardened concrete | Determination of flexural strength of test specimens Regulated area: Tests |
ČSN EN 12390-5; EN 12390-5 | ||
| 327 | Hardened concrete | Determination of density Regulated area: Tests |
ČSN EN 12390-7; EN 12390-7 | ||
| 328 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN EN 12390-8; EN 12390-8 | ||
| 329 | Hardened concrete | Determination of surface resistance to water and chemical de-icing agents Regulated area: Tests |
ČSN 73 1326, metoda A a C | ||
| 330 | Bituminous mixtures | Determination of grain size Regulated area: Tests |
ČSN EN 12697-2; EN 12697-2; ČSN EN 12697-28; EN 12697-28 | ||
| 331 | Fresh concrete | Determination of degree of compactability Regulated area: Tests |
ČSN EN 12350-4; EN 12350-4 | ||
| 332 | Fresh concrete | Determination of mass per unit volume Regulated area: Tests |
ČSN EN 12350-6; EN 12350-6; IZP č. 21 (ČSN EN 12350-6) | ||
| 333 | Hardened concrete | Determination of hardness by rebound hardness tester Regulated area: Tests |
ČSN 73 1370; ČSN 73 1373, mimo čl. 6.3 a přílohy A a B; ČSN EN 12504-2; EN 12504-2 | ||
| 334 | Hardened concrete | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 12390-6; EN 12390-6 | ||
| 335 | Hardened concrete | Determination of static modulus of elasticity in compression Regulated area: Tests |
ČSN ISO 1920-10; ISO 1920-10; ČSN EN 12390-13; EN 12390-13 | ||
| 336 | Hardened concrete | Determination of frost resistance Regulated area: Tests |
ČSN 73 1322 | ||
| 337 | Concrete and reinforced concrete structures | Pile integrity measurement by PIT method Regulated area: Tests |
IZP č. 24 (manuál k zařízení PIT); ASTM D5882, čl. 6 | ||
| 338 | Sprayed concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 14488-2 | ||
| 339 | Aggregates | Determination of grading of fillers Regulated area: Tests |
ČSN EN 933-10; EN 933-10 | ||
| 340 | Fresh concrete | Determination of water and cement content Regulated area: Tests |
ČSN 73 1314, čl. 2.2, 2.3 | ||
| 341 | Aggregates | Determination of loose bulk density and voids of bulk material Regulated area: Tests |
ČSN EN 1097-3; EN 1097-3 | ||
| 342 | Unbound mixtures, hydraulically bound mixtures and soil | Determination of compressive strength Regulated area: Tests |
ČSN EN 13286-41; EN 13286-41 | ||
| 343 | Pavement courses | Determination of layer thickness Regulated area: Tests |
ČSN EN 13863-3; EN 13863-3 | ||
| 344 | Concrete drainage layers | Determination of voids Regulated area: Tests |
ČSN 73 6124-2, příloha A | ||
| 345 | Hydraulically bound mixtures | Determination of resistance to frost and water Regulated area: Tests |
ČSN 73 6124-1, příloha A | ||
| 346 | Unbound mixtures, hydraulically bound mixtures and soil | Determination of the indirect tensile strength Regulated area: Tests |
ČSN EN 13286-42; EN 13286-42 | ||
| 347 | Pavement courses | Determination of pavement surface macrotexture depth using a volumetric patch technique Regulated area: Tests |
ČSN EN 13036-1; EN 13036-1 | ||
| 348 | Concrete structures and components, insulation layers | Determination of layer adhesion and tensile strength Regulated area: Tests |
ČSN 73 6242, příloha B | ||
| 349 | Concrete and reinforced concrete structures | Pile integrity test by CHA method Regulated area: Tests |
IZP č. 25 (manuál k zařízení CHA); ASTM D6760, čl. 7 | ||
| 350 | Bituminous mixtures | Determination of the maximum density Regulated area: Tests |
ČSN EN 12697-5; EN 12697-5 | ||
| 351 | Bituminous mixtures | Determination of the air void content Regulated area: Tests |
ČSN EN 12697-8; EN 12697-8 | ||
| 352 | Pavement courses | Determination of sprayed volume by gravimetry Regulated area: Tests |
IZP č. 22 (ČSN EN 12272-1) | ||
| 353 | Hot applied joint sealants | Determination of density at 25°C Regulated area: Tests |
ČSN EN 13880-1 | ||
| 354 | Hot applied joint sealants | Determination of cone penetration at 25 °C Regulated area: Tests |
ČSN EN 13880-2 | ||
| 355 | Hot applied joint sealants | Determination of penetration and recovery (resilience) Regulated area: Tests |
ČSN EN 13880-3 | ||
| 356 | Concrete and geotechnical structures | Determination of the load-bearing capacity of rock anchors and bolts Regulated area: Tests |
IZP č. 27 (ČSN EN ISO 22477-5) | ||
| 357 | Pavement courses | Measurement of irregularity by straightedge Regulated area: Tests |
ČSN EN 13036-7; EN 13036-7 | ||
| 358 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN 73 1321:1987 | ||
| 359 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1; EN 12350-1 | ||
| 360 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1, čl. 8.2, 8.8, 8.9; EN 932-1, čl. 8.2, 8.8, 8.9 | ||
| 361 | Bituminous mixtures | Bituminous mixture sampling Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7; EN 12697-27, čl. 4.1, 4.2, 4.3, 4.7 | ||
| 362 | Hardened concrete, road layers | Sampling - cored specimens Regulated area: Sampling |
ČSN EN 12504-1, čl. 6; EN 12504-1, p. 6 | ||
| 363 | Bitumen and bituminous binders | Bituminous binder sampling Regulated area: Sampling |
ČSN EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5; EN 58, čl. 8.1.3, 8.1.5, 8.2.2, 8.2.5 | ||
| 364 | Sprayed concrete | Sampling of sprayed concrete Regulated area: Sampling |
ČSN EN 14488-1; EN 14488-1 | ||
| Workplace No. 7 chemical Laboratory | |||||
| 365 | Bituminous mixture, bituminous binder, bituminous recyclate, penetrating macadam | Determination of polycyclic aromatic hydrocarbons (PAHs) by gas chromatography (GC-MS) anthracene benzo(a)anthracene benzo(a)pyrene benzo(b)fluoranthene benzo(g,h,i)perylene benzo(k)fluoranthene chrysene dibenzo(a,h)anthracene phenanthrene fluoranthene indeno(1,2,3-cd)pyrene naphthalene pyrene Regulated area: Tests |
SOP-PAH, mimo čl. 8.2 (ČSN EN 17503) | ||
| 366 | Bituminous mixture, bituminous binder, bituminous recyclate, penetrating macadam | Determination of dry matter by gravimetry Regulated area: Tests |
SOP-PAH, čl. 8.2 (ČSN EN 15934) | ||
Reference standards (184)
ASTM D5882
ASTM D6760
EN 12390-3
EN 1015-10
EN 1015-11
EN 1097-2
EN 1097-3
EN 1097-5
EN 1097-6
EN 1097-7
EN 12350-1
EN 12350-2
EN 12350-4
EN 12350-5
EN 12350-6
EN 12350-7
EN 12390-13
EN 12390-5
EN 12390-6
EN 12390-7
EN 12390-8
EN 12504-1
EN 12504-2
EN 12592
EN 12593
EN 12607-1
EN 12697-1
EN 12697-12
EN 12697-18
EN 12697-2
EN 12697-20
EN 12697-22+A1
EN 12697-23
EN 12697-27
EN 12697-28
EN 12697-29
EN 12697-3+A1
EN 12697-30
EN 12697-34
EN 12697-36
EN 12697-39
EN 12697-5
EN 12697-6
EN 12697-8
EN 13036-1
EN 13036-4
EN 13036-7
EN 13036-8
EN 13179-1
EN 13286-2
EN 13286-41
EN 13286-42
EN 13286-47
EN 13398
EN 13399
EN 1367-1
EN 13702
EN 13863-3
EN 13892-2
EN 1426
EN 1427
EN 14488-1
EN 14770
EN 16659
EN 58
EN 932-1
EN 933-1
EN 933-10
EN 933-4
EN 933-8+A1
EN 933-9
EN ISO 17892-1
EN ISO 17892-12
EN ISO 17892-4
ISO 1920-10
IZP č. 21
IZP č. 22
IZP č. 24
IZP č. 25
IZP č. 27
SOP-PAH
TP 164
TP 211
ČSN 65 7061
ČSN 72 1006
ČSN 72 1010
ČSN 72 1018
ČSN 73 1314
ČSN 73 1321:1987
ČSN 73 1322
ČSN 73 1326
ČSN 73 1370
ČSN 73 1373
ČSN 73 1375
ČSN 73 2011
ČSN 73 6124-1
ČSN 73 6124-2
ČSN 73 6160
ČSN 73 6161
ČSN 73 6175
ČSN 73 6190
ČSN 73 6192
ČSN 73 6242
ČSN EN 1015-10
ČSN EN 1015-11
ČSN EN 1097-2
ČSN EN 1097-3
ČSN EN 1097-5
ČSN EN 1097-6
ČSN EN 1097-7
ČSN EN 12272-1
ČSN EN 12350-1
ČSN EN 12350-2
ČSN EN 12350-4
ČSN EN 12350-5
ČSN EN 12350-6
ČSN EN 12350-7
ČSN EN 12390-13
ČSN EN 12390-3
ČSN EN 12390-5
ČSN EN 12390-6
ČSN EN 12390-7
ČSN EN 12390-8
ČSN EN 12504-1
ČSN EN 12504-2
ČSN EN 12592
ČSN EN 12593
ČSN EN 12607-1
ČSN EN 12697-1
ČSN EN 12697-12
ČSN EN 12697-18
ČSN EN 12697-2
ČSN EN 12697-20
ČSN EN 12697-22+A1
ČSN EN 12697-23
ČSN EN 12697-27
ČSN EN 12697-28
ČSN EN 12697-29
ČSN EN 12697-3+A1
ČSN EN 12697-30
ČSN EN 12697-34
ČSN EN 12697-36
ČSN EN 12697-39
ČSN EN 12697-5
ČSN EN 12697-6
ČSN EN 12697-8
ČSN EN 13036-1
ČSN EN 13036-4
ČSN EN 13036-7
ČSN EN 13036-8
ČSN EN 13179-1
ČSN EN 13286-2
ČSN EN 13286-41
ČSN EN 13286-42
ČSN EN 13286-47
ČSN EN 13398
ČSN EN 13399
ČSN EN 1367-1
ČSN EN 13702
ČSN EN 13863-3
ČSN EN 13880-1
ČSN EN 13880-2
ČSN EN 13880-3
ČSN EN 13892-2
ČSN EN 1426
ČSN EN 1427
ČSN EN 14488-1
ČSN EN 14488-2
ČSN EN 14770
ČSN EN 15934
ČSN EN 16659
ČSN EN 17503
ČSN EN 58
ČSN EN 932-1
ČSN EN 933-1
ČSN EN 933-10
ČSN EN 933-4
ČSN EN 933-8+A1
ČSN EN 933-9
ČSN EN ISO 17892-1
ČSN EN ISO 17892-12
ČSN EN ISO 17892-4
ČSN EN ISO 22477-5
ČSN ISO 1920-10