🇨🇿 České vysoké učení technické v Praze PL
ConstructionMaterials & polymersElectronics & EMC
České vysoké učení technické v Praze is a laboratory accredited by ČIA under number 1061 (Praha 6, Czech Republic). Its accreditation scope covers 130 test methods in the following areas: Construction, Materials & polymers, Electronics & EMC. Test objects include: Concrete, Fresh concrete, Concrete kerb units, Concrete paving blocks.
At a glance
- Accreditation number: ČIA 1061
- Methods in scope: 130
- Types of test objects: 65
- City: Praha 6, Czech Republic
- Valid until: 11-05-2028
- Accreditation number
- 1061
- Accreditation body
- ČIA
- Address
- Šolínova 7, 166 08 Praha 6
- City
- Praha 6, Czech Republic
- Division
- Laboratorium Badawcze Instytutu Kloknera
- Valid until
- 11-05-2028
What this laboratory tests (65)
- Concrete — 10 methods
- Fresh concrete — 10 methods
- Concrete kerb units — 4 methods
- Concrete paving blocks — 4 methods
- Concrete paving flags — 4 methods
- Fresh mortar — 4 methods
- Soils and similar products, substitutes for aggregates — 4 methods
- Welded concrete reinforcing mesh — 4 methods
- Aerated concrete, aerated concrete products — 3 methods
- Building structures — 3 methods
- Building structures and components — 3 methods
- Hardened concrete — 3 methods
- Load-bearing welded joints of concrete reinforcing steel — 3 methods
- Masonry units — 3 methods
- Mortars, ready-mix plasters and binders — 3 methods
- and 50 more
Certificate information
- Certificate date
- 12.01.2026
Accreditation scope — test methods (130)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Fresh concrete | Determination of bulk density Regulated area: Bulk Density |
ČSN EN 12350-6 | ||
| 2 | Fresh mortar | Determination of bulk density Regulated area: Bulk Density |
ČSN EN 1015-6 | ||
| 3 | Hardened concrete | Determination of bulk density Regulated area: Bulk Density |
ČSN EN 12390-7 | ||
| 4 | Aerated concrete, aerated concrete products | Determination of dry bulk density Regulated area: Bulk Density |
ČSN EN 678 | ||
| 5 | Brick products | Determination of mass, bulk density Regulated area: Bulk Density |
ČSN 72 2603, čl. 1 až 6, 11 až 14 | ||
| 6 | Dry hardened mortar | Determination of bulk density Regulated area: Bulk Density |
ČSN EN 1015-10 | ||
| 7 | Concrete paving blocks | Determination of dimensions of concrete paving blocks Regulated area: Dimensions |
ČSN EN 1338, Příloha C | ||
| 8 | Concrete paving flags | Determination of dimensions of concrete paving blocks Regulated area: Dimensions |
ČSN EN 1339, Příloha C | ||
| 9 | Concrete kerb units | Determination of dimensions of concrete paving blocks Regulated area: Dimensions |
ČSN EN 1340, Příloha C | ||
| 10 | Masonry units | Determination of dimensions Regulated area: Dimensions |
ČSN EN 772-16 | ||
| 11 | Concrete | Determination of compressive strength of test specimens Regulated area: Compressive strength |
ČSN EN 12390-3 | ||
| 12 | Aerated concrete, aerated concrete products | Determination of compressive strength Regulated area: Compressive strength |
ČSN EN 679 | ||
| 13 | Products and systems for the protection and repair of concrete structures, rehabilitation materials | Determination of compressive strength Regulated area: Compressive strength |
ČSN EN 12190 | ||
| 14 | Porous concrete from porous aggregates | Determination of compressive strength Regulated area: Compressive strength |
ČSN EN 1354 | ||
| 15 | Masonry units | Determination of compressive strength Regulated area: Compressive strength |
ČSN EN 772-1 + A1 | ||
| 16 | Natural stone | Determination of uniaxial compressive strength Regulated area: Compressive strength |
ČSN EN 1926 | ||
| 17 | Concrete | Determination of flexural strength of test specimens Regulated area: Bending strength |
ČSN EN 12390-5 | ||
| 18 | Porous concrete from porous aggregates | Determination of bending strength Regulated area: Bending strength |
ČSN EN 1521 | ||
| 19 | Aerated concrete, aerated concrete products | Determination of flexural strength Regulated area: Bending strength |
ČSN EN 1351 | ||
| 20 | Metallic fibre-reinforced concrete | Measuring of flexural tensile strength (limit of proportionality (LOP), residual strength) Regulated area: Bending strength |
ČSN EN 14651+A1 | ||
| 21 | Sprayed concrete | Determination of flexural strength (first peak, ultimate and residual) Regulated area: Bending strength |
ČSN EN 14488-3, Metoda A | ||
| 22 | Masonry units | Determination of flexural strength Regulated area: Bending strength |
ČSN EN 772-6 | ||
| 23 | Reinforcing bars, wire rod and wire for the reinforcement of concrete | Bend test Regulated area: Bending strength |
ČSN EN ISO 15630-1, čl. 4 a 6 | ||
| 24 | Welded concrete reinforcing mesh | Bend test of weld joints Regulated area: Bending strength |
ČSN EN ISO 15630-2, čl. 4 a 6 | ||
| 25 | Load-bearing welded joints of concrete reinforcing steel | Bend test Regulated area: Bending strength |
ČSN EN ISO 17660-1, čl. 14.4 | ||
| 26 | Hardened fibre-reinforced concrete | Determination of bending strength Regulated area: Bending strength |
ČSN P 73 2452; ČSN EN 12390-5 | ||
| 27 | Concrete paving flags | Measurement of bending strength and breaking load Regulated area: Bending strength |
ČSN EN 1339, Příloha F | ||
| 28 | Concrete kerb units | Measurement of bending strength Regulated area: Bending strength |
ČSN EN 1340, Příloha F | ||
| 29 | Glass | Determination of bending strength Regulated area: Bending strength |
ČSN EN 1288-3 | ||
| 30 | Metallic materials | Tensile test Regulated area: Tensile strength |
ČSN EN ISO 6892-1 | ||
| 31 | Reinforcing bars, wire rod and wire for the reinforcement of concrete | Tensile test Regulated area: Tensile strength |
ČSN EN ISO 15630-1, čl. 4 a 5 | ||
| 32 | Steel for prestressing | Tensile testing Regulated area: Tensile strength |
ČSN EN ISO 15630-3, čl. 4 a 5 | ||
| 33 | Welded concrete reinforcing mesh | Tensile test Regulated area: Tensile strength |
ČSN EN ISO 15630-2, čl. 4 a 5 | ||
| 34 | Load-bearing welded joints of concrete reinforcing steel | Tensile test Regulated area: Tensile strength |
ČSN EN ISO 17660-1, čl. 14.2 | ||
| 35 | Non-structural welded joints of concrete reinforcing steel | Tensile test Regulated area: Tensile strength |
ČSN EN ISO 17660-2, čl. 14 | ||
| 36 | Concrete | Determination of uniaxial tensile strength Regulated area: Tensile strength |
ČSN 73 1318, Příloha 1 | ||
| 37 | Conductors for overhead lines | Determination of tensile strength Regulated area: Tensile strength |
ČSN EN 50182, čl. 6.4.1 až 6.4.8, Příloha C | ||
| 38 | Cement | Determination of flexural strength and compressive strength Regulated area: Cement and mortar strength |
ČSN EN 196-1 | ||
| 39 | Mortars, ready-mix plasters and binders | Determination of flexural strength and compressive strength Regulated area: Cement and mortar strength |
ČSN EN 1015-11 | ||
| 40 | Welded concrete reinforcing mesh | Determination of tensile shear strength of weld joints Regulated area: Shear strength tests |
ČSN EN ISO 15630-2, čl. 4 a 7 | ||
| 41 | Load-bearing welded joints of concrete reinforcing steel | Shear test Regulated area: Shear strength tests |
ČSN EN ISO 17660-1, čl. 14.3 | ||
| 42 | Coated steel rods in reference concrete | Determination of shear adhesion of steel to concrete Regulated area: Shear strength tests |
ČSN EN 15184 | ||
| 43 | Reinforcing bars in concrete | Determination of shear adhesion of steel to concrete Regulated area: Shear strength tests |
ČSN 73 1328 | ||
| 44 | Steel for prestressing in concrete | Determination of shear adhesion of steel to concrete Regulated area: Shear strength tests |
ČSN 73-1333 | ||
| 45 | Concrete | Determination of the indirect tensile strength Regulated area: Indirect tensile strength |
ČSN EN 12390-6 | ||
| 46 | Concrete paving blocks | Determination of the indirect tensile strength Regulated area: Indirect tensile strength |
ČSN EN 1338, Příloha F | ||
| 47 | Building structures and components | Test of adhesion of surface finish of building structures and components Regulated area: Tensile bond tests |
ČSN 73 2577, čl. 1.14 | ||
| 48 | Building structures and components | Determination of layer adhesion and tensile strength of surface layers Regulated area: Tensile bond tests |
ČSN 73 6242, Příloha B | ||
| 49 | Products and systems for the protection and repair of concrete structures, rehabilitation materials | Determination of bond strength by pull-off Regulated area: Tensile bond tests |
ČSN EN 1542 | ||
| 50 | Concrete | Determination of static modulus of elasticity in compression Regulated area: Static modulus of elasticity |
ČSN ISO 1920-10 | ||
| 51 | Autoclaved aerated concrete or lightweight aggregate concrete | Determination of static modulus of elasticity in compression Regulated area: Static modulus of elasticity |
ČSN EN 1352 | ||
| 52 | Mortars, ready-mix plasters and binders | Determination of modulus of elasticity in compression Regulated area: Static modulus of elasticity |
ČSN EN 13412 | ||
| 53 | Natural stone | Determination of static modulus of elasticity Regulated area: Static modulus of elasticity |
ČSN EN 14580 | ||
| 54 | Concrete | Determination of secant modulus of elasticity in compression Regulated area: Static modulus of elasticity |
ČSN EN 12390-13 | ||
| 55 | Concrete | Determination of strength by hardness testing method Regulated area: Hardness testing of concrete |
ČSN 73 1370; ČSN 73 1373 | ||
| 56 | Metallic materials | Brinell hardness test Regulated area: Hardness testing of metallic materials |
ČSN EN ISO 6506-1 | ||
| 57 | Indoor and outdoor post insulators of ceramic materials or glass | Measurement of dimensions Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 60168 čl. 5.1, Příloha A; IEC 60168 čl. 5.1, Příloha A | ||
| 58 | Indoor and outdoor post insulators of ceramic materials or glass | Test by mechanical loading and determination of deflection under load Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 60168 čl. 5.2, 5.3, 5.8, 5.9, Příloha A; IEC 60168 čl. 5.2, 5.3, 5.8, 5.9, Příloha A | ||
| 59 | Hollow pressurized and unpressurized ceramic and glass insulators | Test of mechanical failure load Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 62155, čl. 7.2, 8, 10.5, 10.6; IEC 62155, čl. 7.2, 8, 10.5, 10.6 | ||
| 60 | Insulated bushings for alternating voltage | Measurement of dimensions Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 60137 ed. 4, čl. 8.14; IEC 60137 ed.6, čl. 8.13 | ||
| 61 | Insulated bushings for alternating voltage | Test by mechanical loading Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 60137 ed. 4 čl. 8.10; IEC 60137 ed.6, čl. 8.9 | ||
| 62 | Ceramic or glass insulator units for overhead lines | Test of mechanical failure force Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN IEC 60383-1, čl. 19; IEC 60383-1, čl. 19 | ||
| 63 | Composite post insulators for overhead lines | Load test of the assembled core Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 61952 ed. 2, čl. 10.4, 11.2; IEC 61952, čl. 10.4, 11.2; ANSI C29.11, čl. 7.2.2, čl. 8.3.1.3.1; ANSI C29.17, čl. 7.2.2, 12.4, 13 | ||
| 64 | Electric power insulators | Ultimate mechanical-strength tests and time-load-withstand-strength test Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ANSI C29.1, čl. 5.1, 5.3 | ||
| 65 | Distribution dead-end type composite insulators | Tensile load test Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ANSI C29.13, čl. 7.7 | ||
| 66 | Composite suspension and tension insulators for overhead lines | Test of the behaviour of the assembled cores under load, depending on the duration of load Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 61109, čl. 10.4, 11.2; IEC 61109, čl. 9.4, 10.3 | ||
| 67 | Composite station post insulators | Load test of the assembled core Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 62231, čl. 8.3, 9.3, 10.4, 11.3; IEC 62231, čl. 8.3, 9.3, 10.4, 11.3; ANSI C29.11, čl. 8.3.1.3.2, 8.3.2 | ||
| 68 | Fittings for overhead lines | Test by mechanical loading Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 61284, čl. 11; IEC 61284, čl. 11 | ||
| 69 | Spacers for overhead lines | Test by mechanical loading Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN IEC 61854 ed. 2, čl. 7.5.1 až 7.5.3; IEC 61854, čl. 7.5.1 až 7.5.3 | ||
| 70 | Surge arresters | Bending moment test Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 60099-4 ed. 3, čl. 8.11, 10.8.11 a Příloha G | ||
| 71 | Pressured and unpressured composite hollow insulators for use in electrical equipment with rate voltage greater than 1 000 V | Bending moment test Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 61462, čl. 8.5, 9.3, 10.4, Příloha A, C; IEC 61462, čl. 8.5, 9.3, 10.4, Příloha A, C | ||
| 72 | Porcelain insulators | Test of mechanical properties Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ANSI C29.9, čl. 6, 8.2.6 a 8.2.7, 8.3.3 až 8.3.5, 8.4.2 | ||
| 73 | Equipment for earthing and short-circuiting | Mechanical tests in bending and torsion Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN 61230 ed. 2, Příloha B; IEC 61230, Příloha B | ||
| 74 | Metallic wires | Wrapping test Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN ISO 7802 | ||
| 75 | Wires for overhead line conductors | Test by mechanical loading Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN IEC 62641, čl. 6.4.2 až 6.4.5; ČSN EN IEC 63248, čl. 7.4.2 až 7.4.4 | ||
| 76 | Steel wires with non-ferrous coating | Determination of mass of non-ferrous metallic coatings by gravimetric method Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN IEC 63248, čl. 7.4.5.1; ČSN EN 10244-1; ČSN EN 10244-2 mimo čl. 5.2.3 | ||
| 77 | Steel wires with non-ferrous coating | Determination of adhesion of non-ferrous metallic coatings Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN IEC 63248, čl. 7.4.5.2; ČSN EN 10244-1, čl. 4.5; 5.3; ČSN EN 10244-2, čl. 4.2.5 | ||
| 78 | Steel wires with non-ferrous coating | Determination of homogeneity of non-ferrous metallic coatings Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
ČSN EN IEC 63248, čl. 7.4.5.3; ČSN EN 10244-2, čl. 4.2.3; 5.3 | ||
| 79 | Polymeric insulating materials in outdoor high voltage electrical applications | Determination of resistance to chemical attack Regulated area: Testing of electrical insulators, wires and elements of overhead lines |
IEC TR 62039, čl. 3.8 | ||
| 80 | Masonry | Determination of compressive strength Regulated area: Masonry testing |
ČSN EN 1052-1 | ||
| 81 | Injection mortars for prestressing cables | Determination of workability, density, strength and volume changes Regulated area: Testing of injection mortars |
ČSN EN 445, čl. 4.3.1, 4.5, 4.6, 4.7 | ||
| 82 | Cement | Determination of setting times and soundness Regulated area: Cement tests |
ČSN EN 196-3 + A1 | ||
| 83 | Fresh concrete | Slump test Regulated area: Tests of fresh concrete |
ČSN EN 12350-2 | ||
| 84 | Fresh concrete | Vebe test Regulated area: Tests of fresh concrete |
ČSN EN 12350-3 | ||
| 85 | Fresh concrete | Flow table test Regulated area: Tests of fresh concrete |
ČSN EN 12350-5 | ||
| 86 | Fresh concrete | Slump-flow test Regulated area: Tests of fresh concrete |
ČSN EN 12350-8 | ||
| 87 | Fresh concrete | V-funnel test Regulated area: Tests of fresh concrete |
ČSN EN 12350-9 | ||
| 88 | Fresh concrete | L-box test Regulated area: Tests of fresh concrete |
ČSN EN 12350-10 | ||
| 89 | Fresh concrete | J-ring test Regulated area: Tests of fresh concrete |
ČSN EN 12350-12, mimo čl. 4.2 | ||
| 90 | Fresh mortar | Determination of consistence Regulated area: Tests of fresh concrete |
ČSN EN 1015-3 | ||
| 91 | Fresh mortar | Determination of workable life Regulated area: Tests of fresh concrete |
ČSN EN 1015-9 | ||
| 92 | Fresh concrete | Determination of air content Regulated area: Determination of air content in fresh concrete and mortar |
ČSN EN 12350-7, mimo čl. 5 a Přílohy A a C | ||
| 93 | Fresh mortar | Determination of air content Regulated area: Determination of air content in fresh concrete and mortar |
ČSN EN 1015-7, Metoda A | ||
| 94 | Hardened mortar | Determination of porosity Regulated area: Determination of air content in fresh concrete and mortar |
Směrnice WTA 2-9-04D, čl. 6.3.9 | ||
| 95 | Mortars, ready-mix plasters and binders | Testing of frost resistance Regulated area: Freeze-thaw testing |
ČSN 72 2452 | ||
| 96 | Concrete | Determination of frost resistance Regulated area: Freeze-thaw testing |
ČSN 73 1322 | ||
| 97 | Concrete products and prefabricated products | Determination of resistance to freezing/thawing without the use of de-icing salts Regulated area: Freeze-thaw testing |
ČSN EN 13198, Příloha A | ||
| 98 | Concrete paving blocks | Determination of total water absorption Regulated area: Determination of water absorption, watertightness |
ČSN EN 1338, Příloha E | ||
| 99 | Concrete paving flags | Determination of total water absorption Regulated area: Determination of water absorption, watertightness |
ČSN EN 1339, Příloha E | ||
| 100 | Concrete kerb units | Determination of total water absorption Regulated area: Determination of water absorption, watertightness |
ČSN EN 1340, Příloha E | ||
| 101 | Concrete | Determination of depth of penetration of water under pressure Regulated area: Determination of water absorption, watertightness |
ČSN EN 12390-8 | ||
| 102 | Prefabricated concrete products, terrace tiles | Water absorption test Regulated area: Determination of water absorption, watertightness |
ČSN EN 13369, Příloha F | ||
| 103 | Concrete | Determination of cement concrete surface resistance to water and chemical de-icing agents Regulated area: Determination of resistance to de-icing agents |
ČSN 73 1326 | ||
| 104 | Concrete products and prefabricated products | Determination of resistance to freezing/thawing with the use of de-icing salt Regulated area: Determination of resistance to de-icing agents |
ČSN EN 13198, Příloha B | ||
| 105 | Concrete paving blocks | Determination of resistance to freezing/thawing with the use of de-icing salts Regulated area: Determination of resistance to de-icing agents |
ČSN EN 1338, Příloha D | ||
| 106 | Concrete paving flags | Determination of resistance to freezing/thawing with the use of de-icing salts Regulated area: Determination of resistance to de-icing agents |
ČSN EN 1339, Příloha D | ||
| 107 | Concrete kerb units | Determination of resistance to freezing/thawing with the use of de-icing salts Regulated area: Determination of resistance to de-icing agents |
ČSN EN 1340, Příloha D | ||
| 108 | Hardened mortar | Determination of the resistance to salts Regulated area: Determination of resistance to de-icing agents |
Směrnice WTA 2-9-04D, čl. 6.3.10 | ||
| 109 | Hardened concrete | Determination of depth of carbonation by phenolphthalein method Regulated area: Determination of concrete resistance to chemical attack and carbonation of concrete |
ČSN EN 14630 | ||
| 110 | Building structures and components | Loading tests Regulated area: Static testing of structures |
ČSN 73 2030 | ||
| 111 | Bridge structures | Static loading tests Regulated area: Static testing of structures |
ČSN 73 6209, mimo čl. 6.7 | ||
| 112 | Reinforced-concrete structures | Mechanical testing of coupling elements and coupled ceiling panels Regulated area: Static testing of structures |
ČSN EN 1994-1-1 ed. 2, Příloha B | ||
| 113 | Road traffic noise reducing devices | Testing of mechanical properties Regulated area: Static testing of structures |
ČSN EN 1794-1, Příloha A, B a E | ||
| 114 | Road traffic noise reducing devices | Determination of stone impact resistance Regulated area: Impact tests |
ČSN EN 1794-1, Příloha C | ||
| 115 | Building structures | Informative dynamic test Regulated area: Dynamic tests of structures and vibration assessment |
ČSN 73 2044, čl. 1 až 19, 24 až 43, 58 | ||
| 116 | Building structures | Dynamic load test Regulated area: Dynamic tests of structures and vibration assessment |
ČSN 73 2044, čl. 1 až 17, 20 až 31, 44 až 56, 58 | ||
| 117 | Building structures | Dynamic load test of bridges Regulated area: Dynamic tests of structures and vibration assessment |
ČSN 73 6209, čl. 4.2, 5.2, 6.1 až 6.3, 6.3.3, 6.5.2, 7.2 a 8 | ||
| 118 | Reinforcing bars, wire rod and wire for the reinforcement of concrete | Axial fatigue test Regulated area: Axial fatigue tests |
ČSN EN ISO 15630-1, čl. 4 a 8 | ||
| 119 | Welded concrete reinforcing mesh | Axial fatigue test Regulated area: Axial fatigue tests |
ČSN EN ISO 15630-2, čl. 4 a 8 | ||
| 120 | Soils and similar products, substitutes for aggregates | Determination of water content by gravimetry Regulated area: Testing of soils, fly ash and aggregates |
ČSN EN ISO 17892-1 | ||
| 121 | Soils and similar products, substitutes for aggregates | Determination of bulk density Regulated area: Testing of soils, fly ash and aggregates |
ČSN 72 1010, čl. A, C, D; ČSN EN ISO 17892-2 | ||
| 122 | Soils and similar products, substitutes for aggregates | Determination of particle size distribution Regulated area: Testing of soils, fly ash and aggregates |
ČSN EN ISO 17892-4 | ||
| 123 | Soils and similar products, substitutes for aggregates | Determination of Atterberg limits Regulated area: Testing of soils, fly ash and aggregates |
ČSN EN ISO 17892-12 | ||
| 124 | Aggregates | Determination of the water content by drying in a ventilated oven Regulated area: Testing of soils, fly ash and aggregates |
ČSN EN 1097-5 | ||
| 125 | Aggregates | Determination of particle density and water absorption Regulated area: Testing of soils, fly ash and aggregates |
ČSN EN 1097-6, mimo Přílohy C, D a E | ||
| 126 | Sawn timber | Determination of moisture content by gravimetric method Regulated area: Determination of moisture, dry matter content |
ČSN EN 13183-1 | ||
| 127 | Additives for concrete, mortar, mortar grouting | Determination of dry matter content by gravimetry Regulated area: Determination of moisture, dry matter content |
ČSN EN 480-8 | ||
| 128 | Fresh concrete | Sampling Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 129 | Hardened concrete | Sampling Regulated area: Sampling |
ČSN EN 12504-1, čl. 2 až 6 | ||
| 130 | Mortars | Sampling and preparation of test mortars Regulated area: Sampling |
ČSN EN 1015-2 | ||
Reference standards (122)
ANSI C29.1
ANSI C29.11
ANSI C29.13
ANSI C29.17
ANSI C29.9
IEC 60137
IEC 60168
IEC 60383-1
IEC 61109
IEC 61230
IEC 61284
IEC 61462
IEC 61854
IEC 61952
IEC 62155
IEC 62231
IEC TR 62039
Směrnice WTA 2-9-04D
ČSN 72 1010
ČSN 72 2452
ČSN 72 2603
ČSN 73 1318
ČSN 73 1322
ČSN 73 1326
ČSN 73 1328
ČSN 73 1370
ČSN 73 1373
ČSN 73 2030
ČSN 73 2044
ČSN 73 2577
ČSN 73 6209
ČSN 73 6242
ČSN 73-1333
ČSN EN 1015-10
ČSN EN 1015-11
ČSN EN 1015-2
ČSN EN 1015-3
ČSN EN 1015-6
ČSN EN 1015-7
ČSN EN 1015-9
ČSN EN 10244-1
ČSN EN 10244-2
ČSN EN 1052-1
ČSN EN 1097-5
ČSN EN 1097-6
ČSN EN 12190
ČSN EN 12350-1
ČSN EN 12350-10
ČSN EN 12350-12
ČSN EN 12350-2
ČSN EN 12350-3
ČSN EN 12350-5
ČSN EN 12350-6
ČSN EN 12350-7
ČSN EN 12350-8
ČSN EN 12350-9
ČSN EN 12390-13
ČSN EN 12390-3
ČSN EN 12390-5
ČSN EN 12390-6
ČSN EN 12390-7
ČSN EN 12390-8
ČSN EN 12504-1
ČSN EN 1288-3
ČSN EN 13183-1
ČSN EN 13198
ČSN EN 13369
ČSN EN 1338
ČSN EN 1339
ČSN EN 1340
ČSN EN 13412
ČSN EN 1351
ČSN EN 1352
ČSN EN 1354
ČSN EN 14488-3
ČSN EN 14580
ČSN EN 14630
ČSN EN 14651+A1
ČSN EN 15184
ČSN EN 1521
ČSN EN 1542
ČSN EN 1794-1
ČSN EN 1926
ČSN EN 196-1
ČSN EN 196-3 + A1
ČSN EN 1994-1-1
ČSN EN 445
ČSN EN 480-8
ČSN EN 50182
ČSN EN 60099-4
ČSN EN 60137
ČSN EN 60168
ČSN EN 61109
ČSN EN 61230
ČSN EN 61284
ČSN EN 61462
ČSN EN 61952
ČSN EN 62155
ČSN EN 62231
ČSN EN 678
ČSN EN 679
ČSN EN 772-1 + A1
ČSN EN 772-16
ČSN EN 772-6
ČSN EN IEC 60383-1
ČSN EN IEC 61854
ČSN EN IEC 62641
ČSN EN IEC 63248
ČSN EN ISO 15630-1
ČSN EN ISO 15630-2
ČSN EN ISO 15630-3
ČSN EN ISO 17660-1
ČSN EN ISO 17660-2
ČSN EN ISO 17892-1
ČSN EN ISO 17892-12
ČSN EN ISO 17892-2
ČSN EN ISO 17892-4
ČSN EN ISO 6506-1
ČSN EN ISO 6892-1
ČSN ISO 1920-10
ČSN ISO 7802
ČSN P 73 2452