🇨🇿 Centrum výzkumu Řež s.r.o. PL
Materials & polymers
Centrum výzkumu Řež s.r.o. is a laboratory accredited by ČIA under number 1047 (Plzeň, Czech Republic). Its accreditation scope covers 62 test methods in the following areas: Materials & polymers. Test objects include: Metallic materials, Welded joints of metallic materials, Plastics, Structural parts.
At a glance
- Accreditation number: ČIA 1047
- Methods in scope: 62
- Types of test objects: 24
- City: Plzeň, Czech Republic
- Valid until: 01-02-2027
- Accreditation number
- 1047
- Accreditation body
- ČIA
- Address
- Tylova 1581/46, Jižní Předměstí, 301 00 Plzeň
- City
- Plzeň, Czech Republic
- Division
- Laboratorium Badawcze VZU
- Valid until
- 01-02-2027
What this laboratory tests (24)
- Metallic materials — 33 methods
- Welded joints of metallic materials — 5 methods
- Plastics — 2 methods
- Structural parts — 2 methods
- AlSi-type casting alloys — 1 method
- Cast irons — 1 method
- Electrical equipment and electrical equipment of traction vehicles — 1 method
- Equipment and assemblies of conventional and nuclear power plants — 1 method
- Flake graphite cast iron — 1 method
- Materials of turbine components — 1 method
- Metallic materials, sheet and strip — 1 method
- Metallic materials, structural parts and assemblies — 1 method
- Moulding and extrusion plastics — 1 method
- Outdoor environment, building interiors, transport and working environment — 1 method
- Printed circuit boards — 1 method
- and 9 more
Laboratory sections (4)
- Metallography testing room — 25 methods
- Mechanical testing room — 24 methods
- Dynamic testing room — 10 methods
- Noise and vibration testing room — 3 methods
Laboratory locations
- Pracownia metalografii — Tylova 1581/46
- Pracownia badań mechanicznych — Jižní Předměstí 3005
- Pracownia badań dynamicznych — Orlík 266/15, Bolevec
- Pracownia hałasu i drgań — Orlík 266/15, Bolevec
Certificate information
- Certificate date
- 01.04.2026
Accreditation scope — test methods (62)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Metallography testing room | |||||
| 1 | Metallic materials | Energy-dispersive microanalysis of elemental composition Regulated area: 1 Metallography testing room |
POS-ZL/52/005; ASTM E1508 | ||
| 2 | Metallic materials | Microstructure test Regulated area: 1 Metallography testing room |
POS-ZL/52/003 | ||
| 3 | Materials of turbine components | Microstructure test Regulated area: 1 Metallography testing room |
POS-ZL/52/002 | ||
| 4 | Tool steels | Microstructure test Regulated area: 1 Metallography testing room |
SEP 1614 | ||
| 5 | Cast irons | Determination of metallographic structure Regulated area: 1 Metallography testing room |
ČSN EN ISO 945-1; ASTM A247; ASTM E562 | ||
| 6 | Metallic materials | Determination of area fraction of secondary phases by the grid method Regulated area: 1 Metallography testing room |
POS-ZL/52/004 (ASTM E562) | ||
| 7 | Metallic materials | Determination of area fraction of secondary phases by image analysis Regulated area: 1 Metallography testing room |
POS-ZL/52/006 (ASTM E1245) | ||
| 8 | Metallic materials | Non-destructive microstructure test (metallographic replica technique) Regulated area: 1 Metallography testing room |
POS-ZL/52/008; DIN 54150:1977 | ||
| 9 | AlSi-type casting alloys | Determination of metallographic structure Regulated area: 1 Metallography testing room |
POS-ZL/52/003; ČSN 42 0491 | ||
| 10 | Metallic materials | Determination of grain size Regulated area: 1 Metallography testing room |
ČSN 42 0462; ČSN EN ISO 643; ASTM E112; GOST 5639 | ||
| 11 | Metallic materials | Metallographic determination of non-metallic inclusions Regulated area: 1 Metallography testing room |
DIN 50602:1985; ČSN ISO 4967; ASTM E45; GOST 1778; SS 11 11 16:1987 | ||
| 12 | Metallic materials | Microscopic measurement of layer thickness Regulated area: 1 Metallography testing room |
ČSN EN ISO 1463 | ||
| 13 | Metallic materials | Measurement of depth of heat-treated and thermochemically treated steel layers Regulated area: 1 Metallography testing room |
ČSN EN ISO 18203 | ||
| 14 | Metallic materials | Determination of depth of decarburisation of steels Regulated area: 1 Metallography testing room |
ČSN EN ISO 3887 | ||
| 15 | Metallic materials | Vickers microhardness test Regulated area: 1 Metallography testing room |
ČSN EN ISO 6507-1; ČSN EN ISO 6507-4; ČSN EN ISO 9015-1; ČSN EN ISO 9015-2 | ||
| 16 | Metallic materials | Metallographic evaluation of metallurgical products Regulated area: 1 Metallography testing room |
ČSN 42 0015; ČSN 42 0060; ČSN 42 0062; ČSN 42 0469 | ||
| 17 | Metallic materials | Determination of macrostructure of materials by deep etching Regulated area: 1 Metallography testing room |
ČSN 42 0467; ČSN EN ISO 5817; ČSN EN ISO 6520-1; ČSN EN ISO 9606-1; ČSN EN ISO 10042; ČSN EN ISO 13919-1; ČSN EN ISO 17639; ČSN EN 12797; ASTM E381; ASTM E340; ASTM A604/A604M-07 (Reapproved 2017); GOST 10243 | ||
| 18 | Metallic materials | Determination of sulphur segregation by the Baumann method Regulated area: 1 Metallography testing room |
POS-ZL/52/001; ISO 4968 | ||
| 19 | Metallic materials | Determination of non-metallic inclusion content by macroscopic methods Regulated area: 1 Metallography testing room |
SEP 1584 | ||
| 20 | Steels | Determination of corrosion resistance Regulated area: 1 Metallography testing room |
ČSN EN ISO 3651-2; ASTM A262-14; GOST 6032 | ||
| 21 | Metallic materials | Non-destructive testing PT (penetrant testing) Regulated area: 1 Metallography testing room |
ČSN EN ISO 3452-1; ČSN EN ISO 23277; ČSN EN 1371-1; ČSN EN 10228-2 | ||
| 22 | Metallic materials | Non-destructive testing MT (magnetic particle testing) Regulated area: 1 Metallography testing room |
ČSN EN ISO 9934-1; ČSN EN ISO 17638; ČSN EN ISO 23278; ČSN EN 1369; ČSN EN 10228-1 | ||
| 23 | Metallic materials | Non-destructive testing VT (visual testing) Regulated area: 1 Metallography testing room |
ČSN EN ISO 5817; ČSN EN ISO 6520-1; ČSN EN ISO 10042; ČSN EN ISO 13919-1; ČSN EN ISO 17637; ČSN EN 13018 | ||
| 24 | Metallic materials | Non-destructive testing UT (ultrasonic testing) Regulated area: 1 Metallography testing room |
ČSN EN 10160; ČSN EN 10308; ČSN EN 10228-3; ČSN EN 10228-4; ČSN EN 12680-1; ČSN EN 12680-2; ČSN EN 12680-3; ČSN EN ISO 17635; ČSN EN ISO 17640; ČSN EN ISO 11666; ČSN EN ISO 23279; ČSN EN ISO 16810 | ||
| 25 | Technical iron (ferrous materials) | Determination of element content by OES (Al, As, B, C, Co, Cr, Cu, Mg, Mn, Mo, N, Nb, Ni, P, Pb, S, Sb, Si, Sn, Ti, V, W, Zr) Aluminium (Al) Arsenic (As) Boron (B) Carbon (C) Cobalt (Co) Chromium (Cr) Copper (Cu) Magnesium (Mg) Manganese (Mn) Molybdenum (Mo) Nitrogen (N) Niobium (Nb) Nickel (Ni) Phosphorus (P) Lead (Pb) Sulphur (S) Antimony (Sb) Silicon (Si) Tin (Sn) Titanium (Ti) Vanadium (V) Tungsten (W) Zirconium (Zr) Regulated area: 1 Metallography testing room |
POS-ZL/51/005 (ČSN 42 1211; HŽ 42 0591:1993; ASTM E415-17; ASTM A751-20; ASTM E1086-14) | ||
| Mechanical testing room | |||||
| 26 | Metallic materials | Tensile test at room temperature Regulated area: 2 Mechanical testing room |
ČSN EN ISO 6892-1; ASTM A370-14 | ||
| 27 | Metallic materials | Tensile test at elevated temperature Regulated area: 2 Mechanical testing room |
ČSN EN ISO 6892-2, mimo metodu A1; ASTM E21, mimo Rp a E | ||
| 28 | Flake graphite cast iron | Tensile test Regulated area: 2 Mechanical testing room |
ČSN 42 0330 | ||
| 29 | Plastics | Determination of tensile properties Regulated area: 2 Mechanical testing room |
ČSN EN ISO 527-1 | ||
| 30 | Moulding and extrusion plastics | Determination of tensile properties Regulated area: 2 Mechanical testing room |
ČSN EN ISO 527-2 | ||
| 31 | Metallic materials, sheet and strip | Determination of plastic strain ratio Regulated area: 2 Mechanical testing room |
ČSN ISO 10113 | ||
| 32 | Metallic materials | Test of planar anisotropy coefficient Regulated area: 2 Mechanical testing room |
ČSN 42 0437 | ||
| 33 | Plastics | Determination of compressive properties Regulated area: 2 Mechanical testing room |
ČSN EN ISO 604 | ||
| 34 | Metallic materials | Impact bending test Regulated area: 2 Mechanical testing room |
ČSN ISO 148-1, mimo KU8 a KV8; ČSN EN ISO 15614, čl. 7.2, 7.4.4 | ||
| 35 | Metallic materials | Impact bending test – instrumented method Regulated area: 2 Mechanical testing room |
ČSN EN ISO 14556 | ||
| 36 | Metallic materials | Determination of brittleness transition temperature of structural steels Regulated area: 2 Mechanical testing room |
ČSN 42 0350 | ||
| 37 | Metallic materials | Bend test Regulated area: 2 Mechanical testing room |
ČSN EN ISO 7438 | ||
| 38 | Metallic materials | Brinell hardness test Regulated area: 2 Mechanical testing room |
ČSN EN ISO 6506-1; ČSN EN ISO 6506-2, tab. 2, tab. 3; ASTM A370-14 | ||
| 39 | Metallic materials | Vickers hardness test Regulated area: 2 Mechanical testing room |
ČSN EN ISO 6507-1 | ||
| 40 | Metallic materials | Rockwell hardness test HRC Regulated area: 2 Mechanical testing room |
ČSN EN ISO 6508-1; ASTM A370-14 | ||
| 41 | Welded joints of metallic materials | Longitudinal tensile test on weld metal Regulated area: 2 Mechanical testing room |
ČSN EN ISO 5178 | ||
| 42 | Welded joints of metallic materials | Transverse tensile test Regulated area: 2 Mechanical testing room |
ČSN EN ISO 4136; ČSN EN ISO 15614, čl. 7.2, 7.4.1 | ||
| 43 | Welded joints of metallic materials | Bend test Regulated area: 2 Mechanical testing room |
ČSN EN ISO 5173; ČSN EN ISO 15614, čl. 7.2, 7.4.2 | ||
| 44 | Welded joints of metallic materials | Fracture test Regulated area: 2 Mechanical testing room |
ČSN EN ISO 9017 | ||
| 45 | Welded joints of metallic materials | Hardness test Regulated area: 2 Mechanical testing room |
ČSN EN ISO 9015-1; ČSN EN ISO 15614, čl. 7.2, 7.4.5 | ||
| 46 | Metallic materials | Flattening test on tubes Regulated area: 2 Mechanical testing room |
ČSN EN ISO 8492 | ||
| 47 | Metallic materials | Flanging test on tubes Regulated area: 2 Mechanical testing room |
ČSN EN ISO 8494 | ||
| 48 | Metallic materials | Ring expanding test on tubes Regulated area: 2 Mechanical testing room |
ČSN EN ISO 8495 | ||
| 49 | Metallic materials | Ring tensile test on tubes Regulated area: 2 Mechanical testing room |
ČSN EN ISO 8496 | ||
| Dynamic testing room | |||||
| 50 | Metallic materials, structural parts and assemblies | Low-cycle and high-cycle fatigue tests Regulated area: 3 Dynamic testing room |
ČSN 42 0362, čl. 1÷37; ČSN 42 0363, čl. 10÷29, 45÷49 | ||
| 51 | Rail vehicles | Strength tests of bogies and their components Regulated area: 3 Dynamic testing room |
POS-ZL/54/028 (ČSN EN 13749:2011; VDV152 - 10/2016; CR WAG TSI, čl. 4.2.3.6.1; CR LOC&PAS TSI, čl. 4.2.3.5.1); ČSN EN 13749; VDV152 - 10/2016; UIC Kodex 510-3 – 1.1.1989, reprint 1.7.1994; UIC Kodex 515-4 – 1.1.1993; UIC Kodex 615-4 – 2nd edition, únor 2003 | ||
| 52 | Electrical equipment and electrical equipment of traction vehicles | Vibration tests Regulated area: 3 Dynamic testing room |
ČSN EN 61373 ed.2, čl. 8, 9, 10; ČSN EN 50206-1 ed.2, čl. 6.4.3, 6.5; ČSN EN 50206-2 ed.2, čl. 6.4.2, 6.5 | ||
| 53 | Equipment and assemblies of conventional and nuclear power plants | Seismic tests Regulated area: 3 Dynamic testing room |
ČSN IEC 980:1993, čl. 4, 6; ČSN EN 60068-2-6; IEC/IEEE 60980-344 ch. 9 | ||
| 54 | Structural parts | Measurement of residual stress Regulated area: 3 Dynamic testing room |
ASTM E837 | ||
| 55 | Two-axle railway freight wagons | Tests of dynamic characteristics of suspension Regulated area: 3 Dynamic testing room |
POS-ZL/54/017 | ||
| 56 | Structural parts and assemblies | Measurement of residual stress by the Ring-Core method Regulated area: 3 Dynamic testing room |
POS-ZL/54/016 | ||
| 57 | Railway freight wagons with two-axle bogies | Tests of dynamic characteristics of suspension Regulated area: 3 Dynamic testing room |
POS-ZL/54/018 | ||
| 58 | Structural parts | Measurement of residual stress by the hole-drilling method Regulated area: 3 Dynamic testing room |
POS-ZL/54/027 | ||
| 59 | Printed circuit boards | Strain gauge measurements Regulated area: 3 Dynamic testing room |
POS-ZL/54/029 | ||
| Noise and vibration testing room | |||||
| 60 | Rotating, static, electrical and mechanical equipment | Noise tests – measurement of sound pressure, measurement of sound intensity Regulated area: 4 Noise and vibration testing room |
ČSN EN ISO 1680; ČSN EN ISO 3744; ČSN EN ISO 3746; ČSN EN ISO 9614-1; ČSN EN ISO 9614-3; ČSN EN ISO 11200; ČSN EN ISO 11201; ČSN EN ISO 11202; ČSN EN ISO 11203; ČSN EN ISO 11205; ČSN ISO 9614-2; ČSN EN 61063:1998 | ||
| 61 | Rotating machines | Vibration measurement Regulated area: 4 Noise and vibration testing room |
ČSN 01 1413; ČSN 20 0065; ČSN EN IEC 60034-14 ed. 3; ČSN ISO 20816-1; ČSN ISO 20816-2; ČSN ISO 20816-4; ČSN ISO 20816-5; ČSN ISO 10816-6; ČSN ISO 10816-7 | ||
| 62 | Outdoor environment, building interiors, transport and working environment | Noise tests – noise measurement Regulated area: 4 Noise and vibration testing room |
ČSN ISO 1996-1; ČSN ISO 1996-2; ČSN EN ISO 9612; HEM-300-26.4.01-16344; Věstník MZ ČR 2017, částka 11 | ||
Reference standards (159)
ASTM A247
ASTM A262-14
ASTM A370-14
ASTM A604/A604M-07 (Reapproved 2017)
ASTM A751-20
ASTM E1086-14
ASTM E112
ASTM E1245
ASTM E1508
ASTM E21, mimo Rp a E
ASTM E340
ASTM E381
ASTM E415-17
ASTM E45
ASTM E562
ASTM E837
CR LOC&PAS TSI, čl. 4.2.3.5.1
CR WAG TSI, čl. 4.2.3.6.1
DIN 50602:1985
DIN 54150:1977
GOST 10243
GOST 1778
GOST 5639
GOST 6032
HEM-300-26.4.01-16344
HŽ 42 0591:1993
IEC/IEEE 60980-344 ch. 9
ISO 4968
POS-ZL/51/005
POS-ZL/52/001
POS-ZL/52/002
POS-ZL/52/003
POS-ZL/52/004
POS-ZL/52/005
POS-ZL/52/006
POS-ZL/52/008
POS-ZL/54/016
POS-ZL/54/017
POS-ZL/54/018
POS-ZL/54/027
POS-ZL/54/028
POS-ZL/54/029
SEP 1584
SEP 1614
SS 11 11 16:1987
UIC Kodex 510-3 – 1.1.1989, reprint 1.7.1994
UIC Kodex 515-4 – 1.1.1993
UIC Kodex 615-4 – 2nd edition, únor 2003
VDV152 - 10/2016
Věstník MZ ČR 2017, částka 11
ČSN 01 1413
ČSN 20 0065
ČSN 42 0015
ČSN 42 0060
ČSN 42 0062
ČSN 42 0330
ČSN 42 0350
ČSN 42 0362, čl. 1÷37
ČSN 42 0363, čl. 10÷29, 45÷49
ČSN 42 0437
ČSN 42 0462
ČSN 42 0467
ČSN 42 0469
ČSN 42 0491
ČSN 42 1211
ČSN EN 10160
ČSN EN 10228-1
ČSN EN 10228-2
ČSN EN 10228-3
ČSN EN 10228-4
ČSN EN 10308
ČSN EN 12680-1
ČSN EN 12680-2
ČSN EN 12680-3
ČSN EN 12797
ČSN EN 13018
ČSN EN 1369
ČSN EN 1371-1
ČSN EN 13749
ČSN EN 13749:2011
ČSN EN 50206-1 ed.2, čl. 6.4.3, 6.5
ČSN EN 50206-2 ed.2, čl. 6.4.2, 6.5
ČSN EN 60068-2-6
ČSN EN 61063:1998
ČSN EN 61373 ed.2, čl. 8, 9, 10
ČSN EN IEC 60034-14 ed. 3
ČSN EN ISO 10042
ČSN EN ISO 11200
ČSN EN ISO 11201
ČSN EN ISO 11202
ČSN EN ISO 11203
ČSN EN ISO 11205
ČSN EN ISO 11666
ČSN EN ISO 13919-1
ČSN EN ISO 14556
ČSN EN ISO 1463
ČSN EN ISO 15614, čl. 7.2, 7.4.1
ČSN EN ISO 15614, čl. 7.2, 7.4.2
ČSN EN ISO 15614, čl. 7.2, 7.4.4
ČSN EN ISO 15614, čl. 7.2, 7.4.5
ČSN EN ISO 1680
ČSN EN ISO 16810
ČSN EN ISO 17635
ČSN EN ISO 17637
ČSN EN ISO 17638
ČSN EN ISO 17639
ČSN EN ISO 17640
ČSN EN ISO 18203
ČSN EN ISO 23277
ČSN EN ISO 23278
ČSN EN ISO 23279
ČSN EN ISO 3452-1
ČSN EN ISO 3651-2
ČSN EN ISO 3744
ČSN EN ISO 3746
ČSN EN ISO 3887
ČSN EN ISO 4136
ČSN EN ISO 5173
ČSN EN ISO 5178
ČSN EN ISO 527-1
ČSN EN ISO 527-2
ČSN EN ISO 5817
ČSN EN ISO 604
ČSN EN ISO 643
ČSN EN ISO 6506-1
ČSN EN ISO 6506-2, tab. 2, tab. 3
ČSN EN ISO 6507-1
ČSN EN ISO 6507-4
ČSN EN ISO 6508-1
ČSN EN ISO 6520-1
ČSN EN ISO 6892-1
ČSN EN ISO 6892-2, mimo metodu A1
ČSN EN ISO 7438
ČSN EN ISO 8492
ČSN EN ISO 8494
ČSN EN ISO 8495
ČSN EN ISO 8496
ČSN EN ISO 9015-1
ČSN EN ISO 9015-2
ČSN EN ISO 9017
ČSN EN ISO 945-1
ČSN EN ISO 9606-1
ČSN EN ISO 9612
ČSN EN ISO 9614-1
ČSN EN ISO 9614-3
ČSN EN ISO 9934-1
ČSN IEC 980:1993, čl. 4, 6
ČSN ISO 10113
ČSN ISO 10816-6
ČSN ISO 10816-7
ČSN ISO 148-1, mimo KU8 a KV8
ČSN ISO 1996-1
ČSN ISO 1996-2
ČSN ISO 20816-1
ČSN ISO 20816-2
ČSN ISO 20816-4
ČSN ISO 20816-5
ČSN ISO 4967
ČSN ISO 9614-2