🇨🇿 Technický a zkušební ústav stavební Praha, s.p. PL
ConstructionMaterials & polymersEnvironment
Technický a zkušební ústav stavební Praha, s.p. is a laboratory accredited by ČIA under number 1018.3 (České Budějovice, Czech Republic). Its accreditation scope covers 1827 test methods in the following areas: Construction, Materials & polymers, Environment. Test objects include: Aggregates, Hardened concrete, Thermal insulation materials and products, Toys.
At a glance
- Accreditation number: ČIA 1018.3
- Methods in scope: 1827
- Types of test objects: 296
- City: České Budějovice, Czech Republic
- Valid until: 04-12-2030
- Accreditation number
- 1018.3
- Accreditation body
- ČIA
- Address
- Nemanická 441, 370 10 České Budějovice
- City
- České Budějovice, Czech Republic
- Division
- Laboratorium centralne
- Valid until
- 04-12-2030
What this laboratory tests (296)
- Aggregates — 113 methods
- Hardened concrete — 95 methods
- Thermal insulation materials and products — 90 methods
- Toys — 56 methods
- Concrete products — 47 methods
- Ventilated façades — 46 methods
- Surface finish — 45 methods
- Cement — 43 methods
- Masonry units — 40 methods
- Fresh concrete — 36 methods
- Sanitary ceramics — 33 methods
- Metallic products — 29 methods
- Products and systems for the protection and repair of concrete structures — 28 methods
- Refractory materials and products — 28 methods
- Sheets for waterproofing — 27 methods
- and 281 more
Laboratory sections (8)
- Testing Laboratory in Brno (0600) — 350 methods
- Testing Laboratory in Praha (0100) — 310 methods
- Testing Laboratory in České Budějovice (0200) — 289 methods
- Testing Laboratory in Plzeň (0300) — 251 methods
- Testing Laboratory in Ostrava (0700) — 246 methods
- ZÚLP Testing laboratory (1000) — 156 methods
- Testing Laboratory in Teplice (0400) — 143 methods
- Testing Laboratory in Předměřice n. L. (0500) — 82 methods
Laboratory locations
- laboratorium badawcze Praga (0100) — Prosecká 811/76a, Prosek
- laboratorium badawcze České Budějovice (0200) — Nemanická 441
- laboratorium badawcze Pilzno (0300) — Zahradní 15
- laboratorium badawcze Teplice (0400) — Tolstého 447, Řetenice
- laboratorium badawcze Předměřice nad Labem (0500) — Průmyslová 283
- laboratorium badawcze Brno (0600) — Hněvkovského 77
- laboratorium badawcze Ostrawa (0700) — U Studia 14
- laboratorium badawcze ZÚLP (1000) — Nemanická 441
Certificate information
- Certificate date
- 07.04.2026
Accreditation scope — test methods (1827)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Testing Laboratory in Praha (0100) | |||||
| 1 | Fresh concrete | Slump test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-2 | ||
| 2 | Fresh concrete | VeBe test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-3 | ||
| 3 | Fresh concrete | Flow table test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-5 | ||
| 4 | Fresh concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-6 | ||
| 5 | Fresh concrete | Determination of air content by pressure method Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-7, čl. 6 | ||
| 6 | Hardened concrete | Frost resistance test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1322 | ||
| 7 | Hardened concrete | Determination of resistance to water and chemical de- icing agents Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1326, metoda A, C | ||
| 8 | Hardened concrete | Determination of the shape and dimensions of specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-1 | ||
| 9 | Hardened concrete | Determination of compressive strength, including the manufacture and treatment of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-2; ČSN EN 12390-3; ČSN EN 12504-1, mimo čl. 6 | ||
| 10 | Hardened concrete | Determination of compressive strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-3 | ||
| 11 | Hardened concrete | Determination of flexural strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-5 | ||
| 12 | Hardened concrete | Determination of the indirect tensile strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-6 | ||
| 13 | Hardened concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-7 | ||
| 14 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-8 | ||
| 15 | Hardened concrete | Determination of compressive strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-1, mimo čl. 6 | ||
| 16 | Hardened concrete | Determination of rebound tester Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-2 | ||
| 17 | Hardened concrete | Test of compressive strength by hardness testing methods (Schmidt N. L.) Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1373 | ||
| 18 | Hardened concrete and mortar | Determination of air void characteristics Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-11 | ||
| 19 | Metallic fibered concrete | Determination of flexural tensile strength – limit of proportionality, residual strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 14651+A1 | ||
| 20 | Concrete products | Determination of dimensions Regulated area: Small concrete products |
ČSN EN 1338, příl. C; ČSN EN 1339, příl. C; ČSN EN 1340, příl. C | ||
| 21 | Concrete products | Determination of total water absorption Regulated area: Small concrete products |
ČSN EN 1338, příl. E; ČSN EN 1339, příl. E; ČSN EN 1340, příl. E | ||
| 22 | Concrete products | Determination of the indirect tensile strength Regulated area: Small concrete products |
ČSN EN 1338, příl. F | ||
| 23 | Concrete products | Determination of bending strength and fracture load Regulated area: Small concrete products |
ČSN EN 1339, příl. F | ||
| 24 | Concrete products | Determination of bending strength Regulated area: Small concrete products |
ČSN EN 1340, příl. F | ||
| 25 | Concrete products and floorings | Determination of abrasiveness – Böhme Regulated area: Small concrete products |
ČSN EN 1338, příl. H | ||
| 26 | Concrete products | Determination of resistance to freezing/thawing Regulated area: Small concrete products |
ČSN EN 1338, příl. D; ČSN EN 1339, příl. D; ČSN EN 1340, příl. D | ||
| 27 | Building components | Determination of shapes, dimensions and appearance Regulated area: Concrete building components and structures |
ČSN 73 0212-5 | ||
| 28 | Hollow core slabs | Determination of shear load capacity Regulated area: Concrete building components and structures |
ČSN EN 1168+A3, příl. J | ||
| 29 | Building components | Determination of impact strength Regulated area: Concrete building components and structures |
ČSN 73 2035 | ||
| 30 | Timber structures | Static loading tests Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 380; ČSN 73 2030, příl. D | ||
| 31 | Timber structures, plasterboards | Determination of strength and stiffness Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 594 | ||
| 32 | Timber structures | Determination of bearing capacity and deformation behaviour Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 595 | ||
| 33 | Timber structures | Soft body impact test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 596 | ||
| 34 | Structural and glued timber | Determination of dimensions, water content, local and global bending modulus of elasticity, shear modulus of elasticity, tensile and compressive modulus of elasticity parallel to and perpendicular to the fibres, tensile and compressive strength parallel to and perpendicular to the fibres, bending and shear strength parallel to the fibres Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 408+A1 | ||
| 35 | Coniferous sawn timber for structural elements | Visual determination of grading characteristics Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN 73 2824-1 | ||
| 36 | Glued timber | Determination of shear strength – shear test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 14080, příl. D | ||
| 37 | Fibre-cement flat sheets | Testing of dimensions and geometrical characteristics Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.2 | ||
| 38 | Structural timber | Determination of moisture content by electrical resistance method Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 13183-2 | ||
| 39 | Wood-based panels, composites | Determination of moisture content by gravimetry Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 322 | ||
| 40 | Cement-bonded particleboards | Determination of hard body impact resistance Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1128 | ||
| 41 | Fixtures for timber structures (nails, screws, dowels and bolts) | Determination of strength and deformation characteristics of transversely loaded joints Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1380 | ||
| 42 | Fixtures for timber structures (joints made with punched metal plate fasteners) | Determination of tensile, compressive and shear strength Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1075 | ||
| 43 | Fixtures for timber structures (stapled joints) | Determination of bearing capacity and deformation – parallel to the fibres and perpendicular to the fibres Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1381 | ||
| 44 | Fixtures for timber structures (screws, nails, staples) | Determination of withdrawal capacity Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1382 | ||
| 45 | Fixtures for timber structures (screws, nails, staples, bolts) | Determination of pull through resistance Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1383 | ||
| 46 | Fixtures for timber structures | Determination of strength and deformation Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 26891 | ||
| 47 | Fixtures for timber structures | Determination of dimensions Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 14592+A1, čl. 5 | ||
| 48 | Fixtures for timber structures | Determination of torsional resistance of driving Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 15737 | ||
| 49 | Wood-based panels, composites | Determination of modulus of elasticity in bending and bending strength Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 310 | ||
| 50 | Wood-based panels, composites | Determination of tensile strength perpendicular to the plane of the board Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 319 | ||
| 51 | Wood-based panels, composites | Determination of resistance to humidity Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 321 | ||
| 52 | Wood-based panels, composites | Determination of thickness swelling Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 317 | ||
| 53 | Fixtures for timber structures | Determination of yield moment Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 409; ČSN EN 14592+A1, čl. 6.3.4.2 | ||
| 54 | Glass grids, geotextiles and geotextile-related products | Determination of tensile strength and elongation Regulated area: Glass grids, geotextiles and geotextile-related products |
ČSN EN 13496 EAD 040016-01-0404, čl. 2.2.7 | ||
| 55 | Sheets for waterproofing | Determination of length, width and straightness Regulated area: Materials, products and waterproofing systems |
ČSN EN 1848-1; ČSN EN 1848-2 | ||
| 56 | Sheets for waterproofing | Determination of thickness Regulated area: Materials, products and waterproofing systems |
ČSN EN 1849-1, čl. 4; ČSN EN 1849-2, čl. 5 | ||
| 57 | Sheets for waterproofing | Determination of mass per unit area Regulated area: Materials, products and waterproofing systems |
ČSN EN 1849-1, čl. 5; ČSN EN 1849-2, čl. 6 | ||
| 58 | Sheets for waterproofing | Determination of visible defects Regulated area: Materials, products and waterproofing systems |
ČSN EN 1850-1; ČSN EN 1850-2 | ||
| 59 | Sheets for waterproofing | Determination of flow resistance Regulated area: Materials, products and waterproofing systems |
ČSN EN 1110 | ||
| 60 | Sheets for waterproofing | Determination of tensile properties Regulated area: Materials, products and waterproofing systems |
ČSN EN 12311-1; ČSN EN 12311-2 | ||
| 61 | Sheets for waterproofing | Determination of tensile adhesion strength Regulated area: Materials, products and waterproofing systems |
ČSN EN 13596 | ||
| 62 | Sheets for waterproofing | Determination of watertightness Regulated area: Materials, products and waterproofing systems |
ČSN EN 1928; ČSN EN 15820 | ||
| 63 | Sheets for waterproofing | Determination of water vapour permeability Regulated area: Materials, products and waterproofing systems |
ČSN EN 1931 | ||
| 64 | Hygroscopic, non- hygroscopic building materials, sheathed products | Determination of water vapour transmission properties Regulated area: Materials, products and waterproofing systems |
ČSN EN ISO 12572 | ||
| 65 | Sheets for waterproofing | Determination of dimensional stability Regulated area: Materials, products and waterproofing systems |
ČSN EN 1107-1; ČSN EN 1107-2 | ||
| 66 | Sheets for waterproofing | Determination of resistance to long term exposure to elevated temperature Regulated area: Materials, products and waterproofing systems |
ČSN EN 1296 | ||
| 67 | Bitumen shingles | Determination of resistance to blistering Regulated area: Materials, products and waterproofing systems |
ČSN EN 544 ed. 2, čl. 6.4.5 | ||
| 68 | Bitumen shingles | Determination of geometrical properties Regulated area: Materials, products and waterproofing systems |
ČSN EN 544 ed. 2, čl. 6.3 | ||
| 69 | Bitumen shingles | Determination of water absorption Regulated area: Materials, products and waterproofing systems |
ČSN EN 544 ed. 2, čl. 6.4.3 | ||
| 70 | Bitumen shingles | Determination of mass per unit area Regulated area: Materials, products and waterproofing systems |
ČSN EN 544 ed. 2, čl. 6.2 | ||
| 71 | Cast roof waterproofing assemblies | Determination of resistance to delamination Regulated area: Materials, products and waterproofing systems |
EOTA TR 004 | ||
| 72 | Cast roof waterproofing assemblies | Determination of resistance to wind load Regulated area: Materials, products and waterproofing systems |
EOTA TR 005 | ||
| 73 | Liquid-applied water impermeable products used under ceramic tiling | Determination of watertightness Regulated area: Materials, products and waterproofing systems |
ČSN EN 14891 ed. 2, čl. A.7 | ||
| 74 | Cast roof waterproofing assemblies | Determination of resistance to artificial ageing by fluorescence UV lamp Regulated area: Materials, products and waterproofing systems |
EOTA TR 010 | ||
| 75 | Sheets for waterproofing | Determination of resistance to artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water Regulated area: Materials, products and waterproofing systems |
ČSN EN 1297 | ||
| 76 | Cast roof waterproofing assemblies | Determination of resistance to dynamic indentation Regulated area: Materials, products and waterproofing systems |
EOTA TR 006 | ||
| 77 | Cast roof waterproofing assemblies | Determination of resistance to static indentation Regulated area: Materials, products and waterproofing systems |
EOTA TR 007, mimo čl. 5.2.5 c) | ||
| 78 | Cast roof waterproofing assemblies | Determination of accelerated ageing by heat Regulated area: Materials, products and waterproofing systems |
EOTA TR 011 | ||
| 79 | Cast roof waterproofing assemblies | Determination of accelerated ageing by hot water Regulated area: Materials, products and waterproofing systems |
EOTA TR 012 | ||
| 80 | Sheets for waterproofing | Determination of the effects liquid chemicals, including water Regulated area: Materials, products and waterproofing systems |
ČSN EN 1847 | ||
| 81 | Sheets for waterproofing | Determination of peel resistance of joints (fissility of sheets) Regulated area: Materials, products and waterproofing systems |
ČSN EN 12316-1 | ||
| 82 | Sheets for waterproofing | Determination of resistance to tearing (nail shank) Regulated area: Materials, products and waterproofing systems |
ČSN EN 12310-1 | ||
| 83 | Sheets for waterproofing | Determination of peel resistance of joints Regulated area: Materials, products and waterproofing systems |
ČSN EN 12316-2 | ||
| 84 | Sheets for waterproofing | Determination of shear resistance of joints Regulated area: Materials, products and waterproofing systems |
ČSN EN 12317-2 | ||
| 85 | Aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-1 | ||
| 86 | Aggregates | Determination of particle size distribution – sieving analysis Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-1 | ||
| 87 | Aggregates | Determination of particle shape - Shape index Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-4 | ||
| 88 | Coarse aggregates | Determination of percentage of crushed particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-5 | ||
| 89 | Aggregates | Determination of resistance to fragmentation Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-2 | ||
| 90 | Aggregates | Determination of loose bulk density and voids Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-3 | ||
| 91 | Aggregates | Determination of the water content by drying in a ventilated oven Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-5 | ||
| 92 | Aggregates | Determination of particle density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-6 | ||
| 93 | Agglomerated stone | Determination of density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-1 | ||
| 94 | Agglomerated stone | Determination of flexural strength Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-2 | ||
| 95 | Agglomerated stone | Determination of freeze resistance Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-5 | ||
| 96 | Metallic products | Tensile test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 6892-1; ČSN EN ISO 15630-1, čl. 5; ČSN EN ISO 17660-1, čl. 14.2; ČSN EN ISO 17660-2, čl. 14.2 | ||
| 97 | Metallic products | Bend test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 7438; ČSN EN ISO 17660-1, čl. 14.4; ČSN EN ISO 17660-1, čl. 14.4 | ||
| 98 | Metallic products | Measurement of geometric characteristics Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 15630-1, čl. 10, 11 | ||
| 99 | Metallic products | Determination of angle accuracy Regulated area: Metallic materials and parts in construction |
ČSN EN 14195 ed. 2 | ||
| 100 | Metallic products | Fatigue test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 15630-1, čl. 8 | ||
| 101 | Metallic products – coatings | Measurement of thickness – microscopic test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 1463 | ||
| 102 | Metallic products | Shear test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 17660-1, čl. 14.3; ČSN EN ISO 17660-2, čl. 14.3 | ||
| 103 | Truss beams of concrete reinforcing steel, concrete reinforcement, weldable reinforcing steel | Determination of the strength of weld joints – shear test Regulated area: Metallic materials and parts in construction |
ČSN EN 10080, příl. B.3, metoda 1 | ||
| 104 | Metallic products | Salt spray test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 9227, čl. 5.2 | ||
| 105 | Metallic products | Determination of dimensions and limit deviations of organic coats Regulated area: Metallic materials and parts in construction |
ČSN EN 10245-1 | ||
| 106 | Drilling screws | Torsion test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 10666, čl. 4.2.3 | ||
| 107 | Mortars | Frost resistance test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 2452 | ||
| 108 | Fresh mortar | Determination of consistence by flow table Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-3 | ||
| 109 | Fresh mortar | Determination of consistence by plunger penetration Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-4 | ||
| 110 | Fresh mortar | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-6 | ||
| 111 | Fresh mortar | Test of air content Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-7 | ||
| 112 | Fresh mortar | Test of workable life Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-9 | ||
| 113 | Hardened mortars | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-10 | ||
| 114 | Hardened mortars | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 9 | ||
| 115 | Screed materials | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2 | ||
| 116 | Hardened mortars | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 8 | ||
| 117 | Screed materials | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2 | ||
| 118 | Hardened mortars | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-12 | ||
| 119 | Cement mortars and adhesives | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.3; ČSN EN 1348:2008; EN 1348:2007 | ||
| 120 | Screed materials | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-8 | ||
| 121 | Hardened mortars | Determination of capillary water absorption coefficient Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-18 | ||
| 122 | Rendering and plastering mortars | Determination of water vapour permeability Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-19 | ||
| 123 | Mortars and adhesives | Determination of slip Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.2 | ||
| 124 | Mortars and dispersion adhesives | Measurement of bond strength by shear test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.4; ČSN EN 1324:2008; EN 1324:2007 | ||
| 125 | Mortars and adhesives | Determination of open time Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.1 | ||
| 126 | Mortars and adhesives based on reactive resins | Measurement of bond strength by shear test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.5; ČSN EN 12003:2009; EN 12003:2008 | ||
| 127 | Screed materials | Determination of abrasion resistance (Böhme) Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-3 | ||
| 128 | Screed materials | Determination of wear resistance by BCA method Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-4 | ||
| 129 | Screed materials | Determination of surface hardness Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-6 | ||
| 130 | Injection mortars | Determination of fluidity and compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 445, čl. 4.3, 4.6 | ||
| 131 | Products and systems for the protection and repair of concrete structures | Determination of linear shrinkage Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12617-1 | ||
| 132 | Products and systems for the protection and repair of concrete structures | Determination of thermal compatibility – Freeze-thaw cycling with de-icing salt immersion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13687-1 | ||
| 133 | Products and systems for the protection and repair of concrete structures | Determination of shrinkage and expansion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12617-4, čl. 6 | ||
| 134 | Products and systems for the protection and repair of concrete structures | Determination of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12190 | ||
| 135 | Products and systems for the protection and repair of concrete structures | Determination of resistance to capillary absorption Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13057 | ||
| 136 | Products and systems for the protection and repair of concrete structures | Determination of resistance to carbonation depth Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13295 | ||
| 137 | Products and systems for the protection and repair of concrete structures | Determination of carbonation depth Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 14630 | ||
| 138 | Products and systems for the protection and repair of concrete structures | Determination of abrasion resistance Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN ISO 5470-1 | ||
| 139 | Products and systems for the protection and repair of concrete structures | Pull-out test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1881 | ||
| 140 | Products and systems for the protection and repair of concrete structures | Measurement of bond strength by pull-off Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1542 | ||
| 141 | Products and systems for the protection and repair of concrete structures | Determination of carbon dioxide permeability Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1062-6, čl. 4.1, 8.1 | ||
| 142 | Products and systems for the protection and repair of concrete structures | Determination of resistance to severe chemical attack – method without pressure Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13529 | ||
| 143 | Fire protection mortars for steel and concrete structures | Determination of joint strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
EGOLF EA 05, čl. 5 | ||
| 144 | Drainage channels for vehicular and pedestrian areas | Load test Regulated area: Draining elements |
ČSN EN 1433, čl. 9.1 | ||
| 145 | Drainage channels for vehicular and pedestrian areas | Determination of dimensions and shape Regulated area: Draining elements |
ČSN EN 1433, čl. 9.3 | ||
| 146 | Drainage channels for vehicular and pedestrian areas | Determination of resistance to frost and chemical de- icing agents Regulated area: Draining elements |
ČSN EN 1433, příl. C | ||
| 147 | Gully tops and manhole tops | Determination of dimensions, shapes Regulated area: Draining elements |
ČSN EN 124-1, čl. 8.4 | ||
| 148 | Drainage channels for vehicular and pedestrian areas | Determination of physico- mechanical characteristics Regulated area: Draining elements |
ČSN EN 1433 | ||
| 149 | Gully tops and manhole tops | Determination of permanent set Regulated area: Draining elements |
ČSN EN 124-1, příl. A | ||
| 150 | Gully tops and manhole tops | Determination of load- bearing capacity Regulated area: Draining elements |
ČSN EN 124-1, příl. B | ||
| 151 | Windows, doors | Air permeability test Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 1026 | ||
| 152 | Gates | Air permeability test Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 12427 | ||
| 153 | Windows, doors | Water tightness test Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 1027 | ||
| 154 | Windows, doors | Test of the resistance to wind load Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 12211 | ||
| 155 | Gates | Test of the resistance to wind load Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 12444 | ||
| 156 | PVC-U profiles for the manufacture of doors and windows | Determination of the strength of welded corners Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 514 | ||
| 157 | Windows, doors | Determination of thermal transmission coefficient - by test - by calculation Regulated area: Doors and windows, roof lights, hardware |
ČSN EN ISO 12567-1; ČSN EN ISO 10077-1 | ||
| 158 | Gates | Determination of thermal transmission coefficient by calculation Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 12428 | ||
| 159 | Window and door frames | Determination of thermal transmission coefficient - by test - by calculation Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 12412-2; ČSN EN ISO 10077-2 | ||
| 160 | Rooflights | Determination of thermal transmission coefficient - by test - by calculation Regulated area: Doors and windows, roof lights, hardware |
ČSN EN ISO 12567-2; ČSN EN 1873+A1, příl. D | ||
| 161 | Gates | Determination of resistance to water penetration Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 12489 | ||
| 162 | Doors | Determination of the resistance to soft and heavy body impact Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 949 | ||
| 163 | Windows | Determination of the resistance to soft and heavy body impact Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 13049 | ||
| 164 | Doors | Determination of the resistance to static torsion Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 948 | ||
| 165 | Windows | Determination of the resistance to static torsion Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 14609 | ||
| 166 | Doors | Determination of resistance to racking Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 947 | ||
| 167 | Windows | Determination of resistance to racking Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 14608 | ||
| 168 | Door leaves | Determination of resistance to hard body impact Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 950 | ||
| 169 | Individual rooflight | Determination of resistance to upward load Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 1873+A1, čl. 6.5.1; ČSN EN 1873:2006, čl. 6.4.1 | ||
| 170 | Individual rooflight | Determination of resistance to downward load Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 1873+A1, čl. 6.5.1; ČSN EN 1873:2006, čl. 6.4.1 | ||
| 171 | Individual rooflight | Determination of resistance to small hard body impact Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 1873+A1, čl. 6.5.2; ČSN EN 1873:2006, čl. 6.4.2 | ||
| 172 | Individual rooflight | Determination of resistance to large soft body impact Regulated area: Doors and windows, roof lights, hardware |
ČSN EN 1873+A1, čl. 6.5.2; ČSN EN 1873:2006, čl. 6.4.2 | ||
| 173 | Plastics, rubbers, bitumen, composites | Determination of resistance to artificial ageing – fluorescence UV lamps Regulated area: Plastics and composites |
ČSN EN ISO 4892-3 | ||
| 174 | Plastics, composites | Determination of water absorption Regulated area: Plastics and composites |
ČSN EN ISO 62 | ||
| 175 | Plastics, composites | Determination of tensile properties Regulated area: Plastics and composites |
ČSN EN ISO 527-1; ČSN EN ISO 527-2; ČSN EN ISO 527-3 | ||
| 176 | Thermoplastics, thermosets and thermotropic polymers on the basis of liquid crystals, composites | Determination of compressive properties Regulated area: Plastics and composites |
ČSN EN ISO 604 | ||
| 177 | Thermoplastics and thermosets, composites | Determination of flexural properties Regulated area: Plastics and composites |
ČSN EN ISO 178 | ||
| 178 | Plastics, composites | Determination of the effects of immersion in liquid chemicals (including water) Regulated area: Plastics and composites |
ČSN EN ISO 175, čl. 5.4, 5.6 | ||
| 179 | Cellular plastics and rubber, composites | Determination of linear dimensions Regulated area: Plastics and composites |
ČSN EN ISO 1923 | ||
| 180 | Cellular plastics and rubbers, composites | Determination of mass per unit volume Regulated area: Plastics and composites |
ČSN EN ISO 845 | ||
| 181 | Plastics (e.g. PMMA), composites | Determination of thickness, width and length Regulated area: Plastics and composites |
ČSN EN ISO 12017, čl. 6.2, 6.3 | ||
| 182 | Plastics (e.g. PMMA), composites | Determination of mass per unit area Regulated area: Plastics and composites |
ČSN EN ISO 12017 | ||
| 183 | Plastics (e.g. PMMA), composites | Determination of flexural properties Regulated area: Plastics and composites |
ČSN EN ISO 12017 | ||
| 184 | Flexible cellular polymers (low density), composites | Determination of resistance to compression Regulated area: Plastics and composites |
ČSN EN ISO 3386-1 | ||
| 185 | Unplasticised polyvinyl chloride (PVC-U) profiles, composites | Determination of the resistance to impact of main profiles by falling mass Regulated area: Plastics and composites |
ČSN EN 477 | ||
| 186 | Plastics, composites | Determination of Shore hardness Regulated area: Plastics and composites |
ČSN EN ISO 868, metoda D | ||
| 187 | Cement | Determination of normal consistency and setting time Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 5, 6 | ||
| 188 | Cement | Determination of volume stability Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 7 | ||
| 189 | Cement | Determination of strength Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-1 | ||
| 190 | Gypsum binders and gypsum plasters for interior plastering | Determination of flexural strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.5.4 | ||
| 191 | Gypsum binders and gypsum plasters for interior plastering | Determination of compressive strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.5.5 | ||
| 192 | Jointing materials for gypsum boards | Determination of adhesion Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13963 ed. 2, čl. 5.5 | ||
| 193 | Jointing materials for gypsum boards | Determination of setting time Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13963 ed. 2, čl. 5.2 | ||
| 194 | Plasterboards | Determination of total water absorption Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 520+A1, čl. 5.9.2 | ||
| 195 | Surface finish | Determination of adhesion Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2577 | ||
| 196 | Surface finish | Determination of watertightness Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2578 | ||
| 197 | Surface finish | Determination of freeze resistance Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2579 | ||
| 198 | Surface finish | Determination of water vapour transmission properties Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2580 | ||
| 199 | Surface finish | Determination of resistance to rapid temperature changes Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2581 | ||
| 200 | Surface finish | Determination of resistance to abrasion Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2582 | ||
| 201 | Surface finish | Determination of resistance to liquids Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 2812-1; ČSN EN ISO 2812-4 | ||
| 202 | Surface finish | Determination of adhesion by pull-off test Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 4624 | ||
| 203 | Surface finish | Determination of water vapour transmission rate Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 7783 | ||
| 204 | Surface finish | Determination of water permeability Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 1062-3 | ||
| 205 | Surface finish | Drop weight test Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 6272-1 | ||
| 206 | Surface finish | Determination of resistance of paint coatings and varnishes to separation from substrates – cross-cut test Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 2409 | ||
| 207 | Surface finish | Determination of thickness Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 2808 | ||
| 208 | Surface finish | Determination of resistance to humidity Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 6270-1 | ||
| 209 | Surface finish | Assessment of degree of blistering Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 4628-2 | ||
| 210 | Surface finish | Assessment of degree of rusting Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 4628-3 | ||
| 211 | Surface finish | Assessment of degree of cracking Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 4628-4 | ||
| 212 | Surface finish | Assessment of degree of flaking Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 4628-5 | ||
| 213 | Surface finish | Assessment of degree of delamination and corrosion around a scribe Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 4628-8 | ||
| 214 | Surface finish | Determination of resistance to artificial ageing – UV lamps and water Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 927-6 | ||
| 215 | Surface finish | Determination of non- volatile-matter content by gravimetry Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 3251 | ||
| 216 | Sealants | Determination of elastic recovery Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 7389 | ||
| 217 | Sealants | Determination of resistance to flow Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 7390 | ||
| 218 | Sealants | Determination of adhesion and cohesion Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 9046 | ||
| 219 | Sealants | Determination of volume changes Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 10563 | ||
| 220 | Sealants | Determination of adhesion and cohesion at maintained extension after immersion in water Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 10590 | ||
| 221 | Sealants | Determination of adhesion and cohesion properties after immersion in water Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 10591 | ||
| 222 | Sealants | Determination of tensile properties Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 8339, čl. 8.2 | ||
| 223 | Sealants | Determination of tensile properties at maintained extension Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 8340 | ||
| 224 | Sealants | Determination of resistance to compression Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 11432 | ||
| 225 | Grouts for tiles | Determination of chemical resistance Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2, čl. 9.5 | ||
| 226 | Grouts for tiles | Determination of flexural and compressive strength Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2, čl. 9.1 | ||
| 227 | Grouts for tiles | Determination of shrinkage Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2, čl. 9.3 | ||
| 228 | Grouts for tiles | Determination of water absorption Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2, čl. 9.2 | ||
| 229 | Surface finish | Determination of ageing resistance – exposure to offshore and related environments Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 12944-9, příl. B | ||
| 230 | Thermal insulation materials and products | Determination of tensile strength parallel to faces Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1608 | ||
| 231 | Thermal insulation materials and products | Determination of setting of blown insulation Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 15101-1+A1, čl. B.2; ČSN EN ISO 18393-1; ČSN EN ISO 18393-1:2012; ČSN EN 15101-1+A1, čl. B.1; ČSN EN 14064-1 ed. 2, příl. J | ||
| 232 | Thermal insulation materials and products | Determination of length and width Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 822:2013; ČSN EN ISO 29465 | ||
| 233 | Thermal insulation materials and products | Determination of thickness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 823:2013; ČSN EN ISO 29466 | ||
| 234 | Thermal insulation materials and products | Pressure test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 826:2013; ČSN EN ISO 29469 | ||
| 235 | Thermal insulation materials and products | Determination of shear strength in axial direction Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 253+A1, čl. 5.4.1; ČSN EN 15632-4, čl. 6.2 | ||
| 236 | Thermal insulation materials and products | Determination of tensile strength perpendicular to faces Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1607 | ||
| 237 | Thermal insulation materials and products | Determination of dimensional stability under specified temperature and humidity conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1604 | ||
| 238 | Thermal insulation materials and products | Determination of dimensional stability at constant laboratory conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1603 | ||
| 239 | Thermal insulation materials and products | Determination of water absorption by partial immersion Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 29767; ČSN EN 1609:2013 | ||
| 240 | Thermal insulation materials and products | Determination of long term water absorption by immersion Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 16535 | ||
| 241 | Thermal insulation materials and products | Determination of elongation at break Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 253+A1, čl. 5.2.2 | ||
| 242 | Thermal insulation materials and products | Determination of the content of pores and air voids Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 253+A1, čl. 5.3.2 | ||
| 243 | Thermal insulation materials and products | Measurement of diameter Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 253+A1, čl. 4.2.2; ČSN EN 253+A1, čl. 4.3.2.1 | ||
| 244 | Thermal insulation materials and products | Measurement of wall thickness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 253+A1, čl. 4.2.3; ČSN EN 253+A1, čl. 4.3.2.2 | ||
| 245 | Thermal insulation materials and products | Determination of water vapour transmission rate Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12086 | ||
| 246 | Thermal insulation materials and products | Bend test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12089 | ||
| 247 | Thermal insulation materials and products | Determination of mass per unit volume Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1602:2013; ČSN EN ISO 29470 | ||
| 248 | Building materials and structures | Determination of steady- state thermal transmission properties - by test - by calculation Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 8990; ČSN EN ISO 6946; ČSN EN ISO 10211 | ||
| 249 | Thermal insulation materials and products | Determination of resistance to impact Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 253+A1, čl. 5.4.6 | ||
| 250 | Thermal insulation materials | Determination of metal corrosion resistance Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 15101-1+A1, příl. E | ||
| 251 | Building materials and products | Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12667 | ||
| 252 | Thermal insulation materials – double skin faced panels | Determination of tensile strength perpendicular to the plane of the panel Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. A1 | ||
| 253 | Thermal-insulation materials – Self-supporting sandwich panels | Determination of compressive strength Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. A.2 | ||
| 254 | Thermal-insulation materials – Self-supporting sandwich panels | Determination of shear strength Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. A.3 | ||
| 255 | Thermal-insulation materials – Self-supporting sandwich panels | Determination of flexural strength Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. A.5 | ||
| 256 | Thermal-insulation materials – Self-supporting sandwich panels | Determination of durability Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. B | ||
| 257 | Thermal insulation materials – PUR foams | Determination of the reaction profile and free-rise density Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN14315-1, příl. E | ||
| 258 | Thermal insulation materials – PUR foams | Determination of substrate adhesion strength perpendicular to faces Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN14315-1, příl. F | ||
| 259 | Thermal insulation materials and building materials | Reaction to fire tests – Single-flame source test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 11925-2 | ||
| 260 | Thermal insulation materials and building materials | Reaction to fire tests – Non- combustibility test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 1182 | ||
| 261 | Thermal insulation materials and products | Determination of behaviour under point load Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12430 | ||
| 262 | Road traffic noise reducing devices | Impact test – danger of falling debris Regulated area: Road equipment, road signs, lighting poles |
ČSN EN 1794-2, příl. B; ČSN EN 1794-2:2004, příl. B | ||
| 263 | Road traffic noise reducing devices | Testing of stone impact resistance Regulated area: Road equipment, road signs, lighting poles |
ČSN EN 1794-1, příl. C; ČSN EN 1794-1:2004, příl. C | ||
| 264 | Adhesive and screed materials for ETICS | Determination of adhesion to the substrate Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.1, 2.2.3.3, 2.2.3.4, 2.2.3.20, 2.2.3.21; EAD 040083-00-0404, čl. 2.2.11, 2.2.20; EAD 040083-01-0404, čl. 2.2.10.1, 2.2.10.2, 2.2.10.3 | ||
| 265 | Mortars – ETICS | Determination of freeze resistance Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.2.3; EAD 040083-00-0404, čl. 2.2.7; EAD 040083-01-0404, čl. 2.2.7 | ||
| 266 | Mesh – ETICS | Determination of tensile strength under normal conditions and after artificial ageing Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.23 až 2.2.3.25; EAD 040083-00-0404, čl. 2.2.21.1, 2.2.21.2; EAD 040083-01-0404, čl. 2.2.21, 2.2.21.2 | ||
| 267 | ETICS | Determination of water absorption Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.2.1; EAD 040083-00-0404, čl. 2.2.5.1; EAD 040083-01-0404, čl. 2.2.5.1 | ||
| 268 | ETICS | Determination of hard body impact resistance Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.19; EAD 040083-00-0404, čl. 2.2.8; EAD 040083-01-0404, čl. 2.2.8 | ||
| 269 | Fresh mortar – ETICS | Determination of mass per unit volume Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. A.6.2; EAD 040083-01-0404, čl. 3.4.1.1 | ||
| 270 | Reinforcement mesh – ETICS | Determination of mass per unit area Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. A.8.2; EAD 040083-01-0404, čl. 3.4.3.1 | ||
| 271 | Base layer, dry hardened mortar – ETICS | Determination of mass per unit volume Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. A.6.3; EAD 040083-01-0404, čl. 3.4.1.2 | ||
| 272 | Pastes, powders – ETICS | Determination of grain size Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. A.6.4; EAD 040083-01-0404, čl. 3.4.1.3 | ||
| 273 | Building structures and their parts | Static loading tests Regulated area: Loading tests of bridges, building structure and floors |
ČSN 73 2030, příl. A, B, C | ||
| 274 | Railings | Determination of impact resistance Regulated area: Loading tests of bridges, building structure and floors |
ČSN 74 3305, příl. B | ||
| 275 | Ventilated facades, partition kits, railings | Determination of impact resistance Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ISO 7892 | ||
| 276 | Framed walls | Determination of impact resistance – small hard body Regulated area: Masonry, hardware, partition walls, ceilings, floors |
EOTA TR 001, čl. 3 | ||
| 277 | Framed walls | Determination of impact resistance – large soft body Regulated area: Masonry, hardware, partition walls, ceilings, floors |
EOTA TR 001, čl. 2 | ||
| 278 | Clay roofing tiles | Determination of water permeability Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 539-1 | ||
| 279 | Masonry units | Determination of dimensions Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-16 | ||
| 280 | Masonry materials and clay roofing tiles | Determination of compression strength, flexural strength and load capacity Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2605 | ||
| 281 | Masonry materials and clay roofing tiles | Determination of load- bearing capacity Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 538 | ||
| 282 | Brick products – ceiling materials | Determination of fracture load Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2642, čl. 13 | ||
| 283 | Brick products | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2601, příl. A | ||
| 284 | Masonry units | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-18 | ||
| 285 | Concrete roofing tiles | Testing of dimensional tolerances and mass Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.2 až 5.5 | ||
| 286 | Concrete masonry units | Determination of percentage area of voids (by paper indentation) Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-2 | ||
| 287 | Clay roofing tiles | Determination of geometrical characteristics Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 1024 | ||
| 288 | Calcium silicate masonry units, aerated concrete units | Determination of moisture content by gravimetry Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-10 | ||
| 289 | Burnt masonry elements for damp proof course units | Determination of water absorption by boiling in water Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-7 | ||
| 290 | Concrete masonry units and masonry units | Determination of water absorption due to capillary action and the initial rate of water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-11 | ||
| 291 | Masonry units | Determination of cold water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-21 | ||
| 292 | Masonry units | Determination of net volume and percentage of voids by hydrostatic weighing Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-3 | ||
| 293 | Masonry units | Determination of mass per unit volume Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-13 | ||
| 294 | Clay pavers | Determination of transversal fracture load Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 1344, příl. D | ||
| 295 | Masonry units | Determination of moisture movement Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-14 | ||
| 296 | Precast concrete products | Determination of strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15435, příl. A, B | ||
| 297 | Beam-and-block floor systems | Measurement of surface dimensions and characteristics Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-2+A1, čl. 5.1 | ||
| 298 | Beam-and-block floor systems | Determination of bending strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-2+A1, čl. 5.2.2 | ||
| 299 | Beam-and-block floor systems | Determination of compressive strength in longitudinal and lateral direction Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-2+A1, čl. 5.2.3, 5.2.4 | ||
| 300 | Masonry units | Determination of compressive strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-1+A1 | ||
| 301 | Concrete roofing tiles | Determination of water permeability Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.7 | ||
| 302 | Concrete roofing tiles | Determination of mechanical resistance (transverse load bearing capacity) Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.6 | ||
| 303 | Concrete roofing tiles | Frost resistance test Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.8 | ||
| 304 | Beam-and-block floor systems | Determination of resistance to concentric load Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-2+A1, čl. 5.2.1 | ||
| 305 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 306 | Hardened concrete | Hardened concrete sampling Regulated area: Sampling |
ČSN EN 12504-1, čl. 6 | ||
| 307 | Bitumen, plastic and rubber sheets for roof waterproofing | Sampling of bitumen, plastic and rubber sheets Regulated area: Sampling |
ČSN EN 13416 | ||
| 308 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1 | ||
| 309 | Mortars | Sampling and preparation of testing mortars Regulated area: Sampling |
ČSN EN 1015-2 | ||
| 310 | Cement and ash | Sampling of cement and fly ash Regulated area: Sampling |
ČSN EN 196-7 | ||
| Testing Laboratory in České Budějovice (0200) | |||||
| 311 | Fresh concrete | Slump test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-2 | ||
| 312 | Fresh concrete | Flow table test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-5 | ||
| 313 | Fresh concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-6 | ||
| 314 | Fresh concrete | Determination of air content by pressure method Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-7, čl. 6 | ||
| 315 | Hardened concrete | Determination of tensile strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1318 | ||
| 316 | Hardened concrete | Frost resistance test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1322 | ||
| 317 | Hardened concrete | Determination of resistance to water and chemical de- icing agents Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1326, metoda A, C | ||
| 318 | Hardened concrete | Determination of the shape and dimensions of specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-1 | ||
| 319 | Hardened concrete | Determination of compressive strength, including the manufacture and treatment of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-2; ČSN EN 12390-3; ČSN EN 12504-1, mimo čl. 6 | ||
| 320 | Hardened concrete | Determination of compressive strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-3 | ||
| 321 | Hardened concrete | Determination of flexural strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-5 | ||
| 322 | Hardened concrete | Determination of the indirect tensile strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-6 | ||
| 323 | Hardened concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-7 | ||
| 324 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-8 | ||
| 325 | Hardened concrete | Determination of static modulus of elasticity in compression Regulated area: Concrete, admixtures and fibres for concrete |
ČSN ISO 1920-10 | ||
| 326 | Hardened concrete | Determination of compressive strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-1, mimo čl. 6 | ||
| 327 | Hardened concrete | Determination of rebound tester Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-2 | ||
| 328 | Hardened concrete | Determination of compressive strength by hardness testing methods (Schmidt N. L.) Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1373 | ||
| 329 | Hardened concrete | Determination of compressive strength by hardness testing methods (Schmidt N. L.) Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 2011 | ||
| 330 | Concrete and mortar additives | Determination of setting time Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-2 | ||
| 331 | Concrete and mortar additives | Determination of bleeding of concrete Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-4 | ||
| 332 | Concrete and mortar additives | Determination of capillary absorption Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-5 | ||
| 333 | Concrete and mortar additives | Determination of solids content Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-8 | ||
| 334 | Bridges – surface layers | Determination of adhesion, tensile strength and impermeability Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 6242, příl. B | ||
| 335 | Bridges – surfaces | Determination of pavement surface macrotexture depth using a volumetric patch technique Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 13036-1 | ||
| 336 | Bridges – surfaces | Determination of irregularity of pavement courses Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 6175, čl. 8 | ||
| 337 | Bridges – surface layers | Determination of impermeability by measuring electrical resistance Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 6242, příl. D | ||
| 338 | Bridges – surface layers | Determination of impermeability by high electrical voltage – spark test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 6242, pří. E | ||
| 339 | Hardened concrete | Determination of static modulus of elasticity in compression Regulated area: Concrete, admixtures and fibres for concrete |
ČSN ISO 6784:1993 | ||
| 340 | Hardened concrete | Determination of pile integrity by PIT method Regulated area: Concrete, admixtures and fibres for concrete |
IP 0200T001 (Manuál k zařízení Pile echo tester) | ||
| 341 | Hardened concrete | Determination of pile integrity by CHA method Regulated area: Concrete, admixtures and fibres for concrete |
IP 0200T002 (Manuál k zařízení Pile echo tester) | ||
| 342 | Concrete products | Determination of dimensions Regulated area: Small concrete products |
ČSN EN 1338, příl. C; ČSN EN 1339, příl. C; ČSN EN 1340, příl. C | ||
| 343 | Concrete products | Determination of total water absorption Regulated area: Small concrete products |
ČSN EN 1338, příl. E; ČSN EN 1339, příl. E; ČSN EN 1340, příl. E | ||
| 344 | Concrete products | Determination of bending strength and fracture load Regulated area: Small concrete products |
ČSN EN 1339, příl. F | ||
| 345 | Concrete products | Determination of bending strength Regulated area: Small concrete products |
ČSN EN 1340, příl. F | ||
| 346 | Fence elements | Determination of load capacity and the total bearing capacity Regulated area: Small concrete products |
ČSN EN 12839 ed. 2 | ||
| 347 | Concrete components | Determination of dimensions, shapes, top layer of reinforcement, crack width Regulated area: Concrete building components and structures |
ČSN EN 13369, příl. H; ČSN EN 13369:2013, příl. J | ||
| 348 | Concrete components | Determination of water absorption Regulated area: Concrete building components and structures |
ČSN EN 13369, příl. F; ČSN EN 13369:2013, příl. G | ||
| 349 | Concrete girders for ceiling structures | Determination of dimensions, shapes, top layer of reinforcement, crack width Regulated area: Concrete building components and structures |
ČSN EN 15037-1, příl. H | ||
| 350 | Concrete pipes | Determination of strength and load bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 1916, příl. C, D | ||
| 351 | Concrete manholes | Determination of strength and load bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 1917, příl. A, B | ||
| 352 | Concrete girders for ceiling structures | Static loading test Regulated area: Concrete building components and structures |
ČSN EN 15037-1, příl. H | ||
| 353 | Concrete manholes | Determination of watertightness Regulated area: Concrete building components and structures |
ČSN EN 1917, příl. C, D | ||
| 354 | Precast concrete products | Determination of dimensions and characteristics of surface, mechanical resistance Regulated area: Concrete building components and structures |
ČSN EN 15037-2+A1, čl. 5.1, 5.2.1, 5.2.2, 5.2.3 | ||
| 355 | Building components | Determination of shapes, dimensions and appearance Regulated area: Concrete building components and structures |
ČSN 73 0212-5 | ||
| 356 | Building materials and products | Determination of moisture content by drying at elevated temperature Regulated area: Concrete building components and structures |
ČSN EN ISO 12570 | ||
| 357 | Building components | Determination of mass Regulated area: Concrete building components and structures |
ČSN 73 2045 | ||
| 358 | Timber structures | Static loading tests Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 380; ČSN 73 2030, příl. D | ||
| 359 | Timber structures | Determination of withdrawal capacity of fasteners Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1382; EAD 040089-00-0404, čl. 2.2.3.13 | ||
| 360 | Timber framed walls | Determination of resistance to soft body impact Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 596 | ||
| 361 | Buildings | Determination of air permeability of buildings Regulated area: Physical factors |
ČSN EN ISO 9972 | ||
| 362 | Glass grids, geotextiles and geotextile-related products | Determination of tensile strength and elongation Regulated area: Glass grids, geotextiles and geotextile-related products |
ČSN EN 13496 | ||
| 363 | Liquid-applied water impermeable products used under ceramic tiling | Determination of watertightness Regulated area: Materials, products and waterproofing systems |
ČSN EN 14891 ed. 2, čl. A.7 | ||
| 364 | Covering and insulation materials in rolls | Determination of water absorption Regulated area: Materials, products and waterproofing systems |
ČSN 50 3602, čl. 46 až 48 | ||
| 365 | Covering and insulation materials in rolls | Determination of mass per unit area Regulated area: Materials, products and waterproofing systems |
ČSN 50 3602, čl. 10, 11 | ||
| 366 | Liquid-applied water impermeable products used under ceramic tiling | Determination of the crack bridging Regulated area: Materials, products and waterproofing systems |
ČSN EN 14891 ed. 2, čl. A.8 | ||
| 367 | Liquid-applied water impermeable products used under ceramic tiling | Determination of adhesion Regulated area: Materials, products and waterproofing systems |
ČSN EN 14891 ed. 2, čl. A.6 | ||
| 368 | Aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-1 | ||
| 369 | Aggregates | Determination of various aggregate particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1180 | ||
| 370 | Aggregates | Determination of fine particle quality - loss on drying test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1187 | ||
| 371 | Aggregates | Determination of particle size distribution – sieving analysis Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-1 | ||
| 372 | Aggregates | Determination of particle shape - flakiness index Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-3 | ||
| 373 | Aggregates | Determination of particle shape - Shape index Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-4 | ||
| 374 | Coarse aggregates | Determination of percentage of crushed particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-5 | ||
| 375 | Aggregates | Determination of fine particle quality – sand equivalent test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-8+A1 | ||
| 376 | Aggregates | Determination of fine particle quality – methylene blue test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-9 | ||
| 377 | Coarse recycled aggregates | Classification of constituents Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-11 | ||
| 378 | Aggregates | Determination of resistance to wear Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-1 | ||
| 379 | Aggregates | Determination of resistance to fragmentation Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-2 | ||
| 380 | Aggregates | Determination of loose bulk density and voids Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-3 | ||
| 381 | Aggregates | Determination of the water content by drying in a ventilated oven Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-5 | ||
| 382 | Aggregates | Determination of particle density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-6 | ||
| 383 | Aggregates | Determination of particle density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-7 | ||
| 384 | Aggregates | Determination of resistance by magnesium sulphate Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-2 | ||
| 385 | Aggregates | Determination of thermal and weathering properties – boiling test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-3 | ||
| 386 | Aggregates | Determination of drying shrinkage Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-4 | ||
| 387 | Aggregates | Determination of potential content of humus particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 15.1 | ||
| 388 | Aggregates | Determination of durability by accelerated test with sodium sulphate Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1176, čl. 7 až 16 | ||
| 389 | Aggregates | Determination of resistance to freezing by freeze test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1176, čl. 17 až 26 | ||
| 390 | Aggregates | Determination of resistance to fragmentation Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13450, příl. C | ||
| 391 | Aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13450, příl. F | ||
| 392 | Aggregates | Determination of resistance to magnesium sulphate Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13450, příl. G | ||
| 393 | Lightweight aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-7 | ||
| 394 | Soils and backfills | Determination of compaction Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1006, příl. A, B a D | ||
| 395 | Soils and backfills | Determination of density with cutting ring Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1010, čl. 8 až 14 | ||
| 396 | Soils and backfills | Determination of compactability – Proctor compaction Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13286-2 | ||
| 397 | Agglomerated stone | Determination of density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-1 | ||
| 398 | Agglomerated stone | Determination of flexural strength Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-2 | ||
| 399 | Agglomerated stone | Determination of freeze resistance Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-5 | ||
| 400 | Agglomerated stone | Determination of dimensions, geometric characteristics and surface quality Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-16 | ||
| 401 | Soils and backfills | Static loading test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 73 6190 | ||
| 402 | Metallic products | Tensile test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 6892-1 | ||
| 403 | Metallic products | Bend test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 7438; ČSN EN ISO 5173 | ||
| 404 | Chimney products | Determination of freeze resistance Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 14297 | ||
| 405 | Masonry mortars | Frost resistance test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 2452 | ||
| 406 | Dry mixtures | Determination of particle size distribution – sieving analysis Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-1 | ||
| 407 | Fresh mortar | Determination of consistence by flow table Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-3 | ||
| 408 | Fresh mortar | Determination of consistence by plunger penetration Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-4 | ||
| 409 | Fresh mortar | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-6 | ||
| 410 | Fresh mortar | Determination of air content Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-7 | ||
| 411 | Fresh mortar | Test of workable life Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-9 | ||
| 412 | Dry hardened mortars | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-10 | ||
| 413 | Dry hardened mortars | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 9 | ||
| 414 | Screed materials | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.2 | ||
| 415 | Dry hardened mortars | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 8 | ||
| 416 | Screed materials | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.1 | ||
| 417 | Dry hardened mortars | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-12 | ||
| 418 | Cement mortars and adhesives | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.3; ČSN EN 1348:2008 | ||
| 419 | Screed materials | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-8 | ||
| 420 | Hardened mortars | Determination of capillary water absorption coefficient Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-18 | ||
| 421 | Rendering and plastering mortars | Determination of water vapour permeability Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-19 | ||
| 422 | Mortars and one-coat rendering mortars | Determination of adhesion to substrate Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-21 | ||
| 423 | Mortars and adhesives | Determination of slip Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.2 | ||
| 424 | Mortars and dispersion adhesives | Measurement of bond strength by shear test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.4; ČSN EN 1324:2008 | ||
| 425 | Mortars and adhesives | Determination of open time Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.1 | ||
| 426 | Cement mortars and grouts | Determination of transverse deformation Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.6 | ||
| 427 | Mortars and adhesives based on curable resins | Measurement of bond strength by shear test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.5; ČSN EN 12003:2009 | ||
| 428 | Screed materials | Determination of dimensional variations Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13872 | ||
| 429 | Renovation plasters | Determination of water retention capability Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
WTA 2-9:03/2020, čl. 6.2.4 | ||
| 430 | Renovation plasters | Determination of water vapour diffusion resistance factor Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
WTA 2-9:03/2020, čl. 6.3.9 | ||
| 431 | Renovation plasters | Determination of capillary water absorption Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
WTA 2-9:03/2020, čl. 6.3.7 | ||
| 432 | Renovation plasters | Determination of water penetration depth Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
WTA 2-9:03/2020, čl. 6.3.8 | ||
| 433 | Renovation plasters | Determination of porosity Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
WTA 2-9:03/2020, čl. 6.3.10 | ||
| 434 | Renovation plasters | Determination of resistance to salts Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
WTA 2-9:03/2020, čl. 6.3.11 | ||
| 435 | Products and systems for the protection and repair of concrete structures | Determination of linear shrinkage Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12617-1 | ||
| 436 | Products and systems for the protection and repair of concrete structures | Determination of thermal compatibility – Freeze-thaw cycling with de-icing salt immersion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13687-1 | ||
| 437 | Products and systems for the protection and repair of concrete structures | Determination of thermal compatibility – Thermal cycling without de-icing salt impact Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13687-3 | ||
| 438 | Products and systems for the protection and repair of concrete structures | Determination of shrinkage and expansion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12617-4, čl. 6, 7 | ||
| 439 | Products and systems for the protection and repair of concrete structures | Determination of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12190 | ||
| 440 | Products and systems for the protection and repair of concrete structures | Determination of resistance to capillary absorption Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13057 | ||
| 441 | Products and systems for the protection and repair of concrete structures | Measurement of bond strength by pull-off Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1542 | ||
| 442 | Products and systems for the protection and repair of concrete structures | Determination of coefficient of thermal expansion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1770, čl. 4 | ||
| 443 | Products and systems for the protection and repair of concrete structures | Determination of setting time Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13294 | ||
| 444 | Screed materials | Determination of abrasion resistance (Böhme) Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-3 | ||
| 445 | Screed materials | Determination of wear resistance by BCA method Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-4 | ||
| 446 | Screed materials | Determination of dimensional stability Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-9 | ||
| 447 | Dry hardened mortars | Determination of water absorption coefficient by partial immersion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN ISO 15148 | ||
| 448 | Tanks | Determination of watertightness Regulated area: Tanks, reservoirs, septic tanks, water treatment plants |
ČSN 75 0905 | ||
| 449 | Prefabricated septic tanks | Determination of watertightness and nominal dimension Regulated area: Tanks, reservoirs, septic tanks, water treatment plants |
ČSN EN 12566-1, příl. A | ||
| 450 | Prefabricated septic tanks | Determination of hydraulic efficiency Regulated area: Tanks, reservoirs, septic tanks, water treatment plants |
ČSN EN 12566-1, příl. B | ||
| 451 | Plastics, composites | Determination of water absorption Regulated area: Plastics and composites |
ČSN EN ISO 62 | ||
| 452 | Plastics, composites | Determination of tensile properties Regulated area: Plastics and composites |
ČSN EN ISO 527-1; ČSN EN ISO 527-2; ČSN EN ISO 527-3 | ||
| 453 | Plastics, composites | Determination of the effects of immersion in liquid chemicals (including water) Regulated area: Plastics and composites |
ČSN EN ISO 175 | ||
| 454 | Cement | Determination of normal consistency and setting time Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 1 až 6 | ||
| 455 | Cement | Determination of volume stability Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 7 | ||
| 456 | Cement | Determination of strength Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-1 | ||
| 457 | Lime | Determination of bulk density Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.3 | ||
| 458 | Gypsum binders and gypsum plasters for interior plastering | Determination of flexural strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.5.4 | ||
| 459 | Gypsum binders and gypsum plasters for interior plastering | Determination of compressive strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.5.5 | ||
| 460 | Gypsum binders and gypsum plasters for interior plastering | Determination of adhesion Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.6 | ||
| 461 | Screeds based on calcium sulfate | Determination of workable life Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13454-2, čl. 5.6 | ||
| 462 | Screeds based on calcium sulfate | Determination of compressive strength and flexural strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13454-2, čl. 5.4 | ||
| 463 | Screeds based on calcium sulfate | Determination of pH colorimetrically Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13454-2, čl. 5.2 | ||
| 464 | Screeds based on calcium sulfate | Determination of setting time Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13454-2, čl. 5.3 | ||
| 465 | Screeds based on calcium sulfate | Determination of shrinkage and expansion Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13454-2, čl. 5.5 | ||
| 466 | Surface finish | Determination of adhesion Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2577 | ||
| 467 | Surface finish | Determination of watertightness Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2578 | ||
| 468 | Surface finish | Determination of freeze resistance Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2579 | ||
| 469 | Surface finish | Determination of water vapour transmission properties Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2580 | ||
| 470 | Surface finish | Determination of resistance to rapid temperature changes Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2581 | ||
| 471 | Surface finish | Determination of resistance to liquids Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 2812-1; ČSN EN ISO 2812-2 | ||
| 472 | Surface finish | Determination of adhesion by pull-off test Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 4624 | ||
| 473 | Surface finish | Determination of water vapour transmission rate Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 7783; ČSN EN ISO 12572 | ||
| 474 | Surface finish | Determination of water permeability Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 1062-3 | ||
| 475 | Surface finish | Drop weight test Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 6272-1 | ||
| 476 | Adhesives | Determination of shear strength Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 1465 | ||
| 477 | Adhesives | Determination of shear strength – shear test Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 22632 | ||
| 478 | Adhesives | Determination of dimensional variations Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 22633 | ||
| 479 | Adhesives | Determination of dimensional changes after ageing Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 22635 | ||
| 480 | Sealants | Determination of elastic recovery Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 7389 | ||
| 481 | Sealants | Determination of resistance to flow Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 7390 | ||
| 482 | Sealants | Determination of adhesion and cohesion Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 9046 | ||
| 483 | Sealants | Determination of volume changes Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 10563 | ||
| 484 | Sealants | Determination of adhesion and cohesion at maintained extension after immersion in water Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 10590 | ||
| 485 | Sealants | Determination of adhesion and cohesion properties after immersion in water Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 10591 | ||
| 486 | Sealants | Determination of tensile properties Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 8339 | ||
| 487 | Sealants | Determination of tensile properties at maintained extension Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 8340 | ||
| 488 | Grouts for tiles | Determination of flexural and compressive strength Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 489 | Grouts for tiles | Determination of shrinkage Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 490 | Grouts for tiles | Determination of water absorption Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 491 | Adhesives | Determination of resistance to peeling Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 22631 | ||
| 492 | Adhesives | Determination of shear strength Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 17178, čl. 4.2, 4.4 | ||
| 493 | Adhesives | Determination of tensile strength Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 17178, čl. 4.3 | ||
| 494 | Thermal insulation materials and products | Determination of length and width Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 822:2013; ČSN EN ISO 29465 | ||
| 495 | Thermal insulation materials and products | Determination of thickness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 823:2013; ČSN EN ISO 29466 | ||
| 496 | Thermal insulation materials and products | Determination of squareness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 824 | ||
| 497 | Thermal insulation materials and products | Determination of flatness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 825:2013; ČSN EN ISO 29468 | ||
| 498 | Thermal insulation materials and products | Pressure test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 826:2013; ČSN EN ISO 29469 | ||
| 499 | Thermal insulation materials and products | Determination of tensile strength perpendicular to faces Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1607 | ||
| 500 | Thermal insulation materials and products | Determination of dimensional stability under specified temperature and humidity conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1604 | ||
| 501 | Thermal insulation materials and products | Determination of dimensional stability at constant laboratory conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1603 | ||
| 502 | Thermal insulation materials and products | Determination of water absorption by partial immersion Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 29767; ČSN EN 1609:2013 | ||
| 503 | Thermal insulation materials and products | Determination of long term water absorption by immersion Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 16535, metoda 1A, 2A | ||
| 504 | Thermal insulation materials and products | Determination of water vapour transmission rate Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12086 | ||
| 505 | Thermal insulation materials and products | Bend test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12089 | ||
| 506 | Thermal insulation materials and products | Determination of mass per unit volume Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1602:2013; ČSN EN ISO 29470 | ||
| 507 | Building materials and products | Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12667 | ||
| 508 | Building materials | Determination of steady- state thermal transmission properties Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 8990 | ||
| 509 | Thermal insulation materials and products | Determination of steady state thermal resistance and related quantities – Guarded hot plate apparatus method Regulated area: Thermal insulation materials and products, thermal tests |
ISO 8302; ČSN 72 7012-1; ČSN 72 7012-2; ČSN 72 7012-3 | ||
| 510 | Thermal insulation materials and products | Determination of behaviour under point load Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12430 | ||
| 511 | Thermal insulation materials and products | Determination of shear strength and shear modulus of elasticity Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12090 | ||
| 512 | Thermal insulation materials and products | Determination of pressure forming Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1606:2013; ČSN EN ISO 16534 | ||
| 513 | Thermal insulation materials and products | Determination of setting of blown insulation Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14064-1 ed. 2, příl. J | ||
| 514 | PUR foams | Determination of initial value of thermal conductivity Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14315-1, C.3 | ||
| 515 | PUR foams | Determination of thermal conductivity coefficient – accelerated ageing Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14315-1, C.4 | ||
| 516 | PUR foams | Determination of thermal conductivity coefficient – fixed increment procedure Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14315-1, C.5 | ||
| 517 | Thermal insulation materials and products | Determination of setting of blown insulation Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 15101-1+A1, čl. B.1 | ||
| 518 | Thermal insulation materials and building materials | Reaction to fire tests – Single-flame source test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 11925-2 | ||
| 519 | Thermal insulation materials and products | Reaction to fire tests – determination of the gross heat of combustion (calorific value) Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 1716 | ||
| 520 | Thermal insulation materials | Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12664 | ||
| 521 | Thermal insulation materials and products | Determination of linear dimensions of test specimens Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12085:2013; ČSN EN ISO 29768 | ||
| 522 | Thermal insulation materials | Determination of deformation under specified compressive load and temperature conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1605 | ||
| 523 | Thermal insulation materials | Determination of organic content by gravimetry Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 13820 | ||
| 524 | Adhesive and screed materials for ETICS | Determination of adhesion to the substrate Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.1, 2.2.3.3, 2.2.3.4, 2.2.3.20, 2.2.3.21; EAD 040287-00-0404, čl. 2.2.8; EAD 040287-01-0404, čl. 2.2.11; EAD 040083-00-0404, čl. 2.2.11, 2.2.20; EAD 040083-01-0404, čl. 2.2.10.1, 2.2.10.2, 2.2.10.3; EAD 040465-00-0404, čl. 2.2.3.1, 2.2.3.2, 2.2.3.3 | ||
| 525 | Mortars – ETICS | Determination of freeze resistance Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.2.3; EAD 040287-00-0404, čl. 2.2.5.2; EAD 040287-01-0404, čl. 2.2.6.2; EAD 040083-00-0404, čl. 2.2.7; EAD 040083-01-0404, čl. 2.2.7; EAD 040465-00-0404, čl. 2.2.2.3 | ||
| 526 | Mesh – ETICS | Determination of tensile strength under normal conditions and after artificial ageing Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.23, 2.2.3.24, 2.2.3.25; EAD 040287-00-0404, čl. L.9; EAD 040287-01-0404, čl. A.7.4; EAD 040083-00-0404, čl. 2.2.21.1, 2.2.21.2; EAD 040083-01-0404, čl. 2.2.21.1, 2.2.21.2; EAD 040465-00-0404, čl. 2.2.3.12, 2.2.3.13 | ||
| 527 | Insulant – ETICS | Tensile test perpendicular to the faces - in wet conditions Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.8; EAD 040287-00- 0404, čl. 2.2.9; EAD 040287-01-0404, čl. 2.2.12; EAD 040083-00-0404, čl. 2.2.14.2 | ||
| 528 | Base layer – ETICS | Determination of tensile properties Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.12; EAD 040083-00-0404, čl. 2.2.17; EAD 040083-01-0404, čl. 2.2.16 | ||
| 529 | ETICS | Determination of water absorption Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.2.1; EAD 040287-00-0404, čl. 2.2.3; EAD 040287-01-0404, čl. 2.2.4; EAD 090019-00-0404, čl. 2.2.4; EAD 040083-00-0404, čl. 2.2.5.1; EAD 040083-01-0404, čl. 2.2.5.1; EAD 040465-00-0404, čl. 2.2.2.1 | ||
| 530 | ETICS | Determination of hard body impact resistance Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.19; EAD 040083-00-0404, čl. 2.2.8; EAD 040083-01-0404, čl. 2.2.8 | ||
| 531 | ETICS | Determination of the pull- through resistance of anchors through insulation Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.6.1; EAD 040287-00-0404, čl. 2.2.12; EAD 040287-01-0404, čl. 2.2.15; EAD 040083-00-0404, čl. 2.2.13.1; EAD 040083-01-0404, čl. 2.2.12.1; EAD 040465-00-0404, čl. 2.2.3.5.1 | ||
| 532 | ETICS | Determination of the pull- through resistance of anchors through insulation (Static foam block test) Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.6.2; EAD 040287-00-0404, čl. 2.2.13; EAD 040287-01-0404, čl. 2.2.16; EAD 040083-00-0404, čl. 2.2.13.2; EAD 040083-01-0404, čl. 2.2.12.2; EAD 040465-00-0404, čl. 2.2.3.5.2 | ||
| 533 | Adhesive and screed materials, plasters and liquids – ETICS | Determination of mass per unit volume Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.1.1; EAD 040287-01-0404, čl. A.5.1; EAD 040083-00-0404, čl. A.6.1; EAD 040083-01-0404, čl. 3.4.1.1, 3.4.1.2 | ||
| 534 | Pastes and liquids – ETICS | Determination of dry matter by gravimetry Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.3; EAD 040287-01-0404, čl. A.5.5; EAD 040083-00-0404, čl. A.6.5; EAD 040083-01-0404, čl. A.6.1 | ||
| 535 | Adhesive and screed materials, plasters and liquids – ETICS | Determination of ash content by gravimetry Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.4.1; EAD 040287-01-0404, čl. A.5.6; EAD 040083-00-0404, čl. A.6.6; EAD 040083-01-0404, čl. A.6.2 | ||
| 536 | Fresh mortar – ETICS | Determination of water retention capability Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. A.6.7 | ||
| 537 | Fresh mortar – ETICS | Determination of mass per unit volume Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.1.2; EAD 040287-01-0404, čl. A.5.2; EAD 040083-00-0404, čl. A.6.2; EAD 040083-01-0404, čl. 3.4.1.1 | ||
| 538 | Base layer – ETICS | Determination of shrinkage of screed Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.6; EAD 040287-01-0404, čl. A.5.8.2; EAD 040083-00-0404, čl. A.6.8.2 | ||
| 539 | Base layer – ETICS | Determination of static modulus of elasticity, tensile strength and elongation at break Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.16; EAD 040287-00-0404, čl. L.5.2; EAD 040287-01-0404, čl. A.5.8; EAD 040083-00-0404, čl. A.6.8.3 | ||
| 540 | Reinforcement mesh – ETICS | Determination of mass per unit area Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.7; EAD 040287-01-0404, čl. A.7.2; EAD 040083-00-0404, čl. A.8.2; EAD 040083-01-0404, čl. 3.4.3.1 | ||
| 541 | Reinforcement mesh – ETICS | Determination of ash content by gravimetry Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.4.2; EAD 040287-01-0404, čl. A.7.1; EAD 040083-00-0404, čl. A.8.1; EAD 040083-01-0404, čl. A.6.2 | ||
| 542 | Reinforcement mesh – ETICS | Determination of mesh size and number of fibres Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.8; EAD 040287-01-0404, čl. A.7.3; EAD 040083-00-0404, čl. A.8.3; EAD 040083-01-0404, čl. 3.4.3.2 | ||
| 543 | Base layer, dry hardened mortar – ETICS | Determination of mass per unit volume Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.1.3; EAD 040287-01-0404, čl. A.5.3; EAD 040083-00-0404, čl. A.6.3; EAD 040083-01-0404, čl. 3.4.1.2 | ||
| 544 | Pastes, powders – ETICS | Determination of grain size Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.2; EAD 040287-01-0404, čl. A.5.4; EAD 040083-00-0404, čl. A.6.4; EAD 040083-01-0404, čl. 3.4.1.3 | ||
| 545 | Ventilated façades | Determination of bracket resistance to vertical load (dead weight) and horizontal load (wind suction) Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. L | ||
| 546 | ETICS | Determination of hygrothermal behaviour Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.2.2; EAD 040287-00-0404, čl. 2.2.5.1; EAD 040287-01-0404, čl. 2.2.6.1; EAD 040083-00-0404, čl. 2.2.6; EAD 040083-01-0404, čl. 2.2.6; EAD 040465-00-0404, čl. 2.2.2.2.2 | ||
| 547 | Foam adhesives for ETICS | Determination of density, non-stick time, cutting time, Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 3.4.2 | ||
| 548 | Foam adhesives for ETICS | Determination of adhesion, shear strength and shear modulus of elasticity Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.4, 2.2.3.17; EOTA TR 46, čl. 4.1, 4.3 | ||
| 549 | Foam adhesives for ETICS | Determination of behaviour after expansion Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.18; EOTA TR 46, čl. 4.2 | ||
| 550 | Ventilated façades | Determination of pull-out resistance of a fixing through a cladding element Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.1 | ||
| 551 | Ventilated façades | Determination of pull- through resistance of a fixing under shear load Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.2 | ||
| 552 | Ventilated façades | Determination of pull-out resistance of a fixing under tensile load Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.1 | ||
| 553 | Ventilated façades | Determination of pull-out resistance of a fixing under shear load Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.2 | ||
| 554 | Ventilated façades | Determination of pull-out resistance of a fixing through a cladding element under combined tensile and shear loads Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.3 | ||
| 555 | Ventilated façades | Determination of break resistance of a grooved cladding element Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. H.1 | ||
| 556 | Ventilated façades | Determination of resistance to vertical load Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. J.1 | ||
| 557 | Ventilated façades | Determination of pull- through resistance of a fixing through a profile Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. J.2 | ||
| 558 | Ventilated façades | Determination of pull- through resistance of a fixing through a metal clip Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. J.2 | ||
| 559 | Ventilated façades | Determination of metal clip break resistance Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. J.3 | ||
| 560 | Ventilated façades | Determination of suspended kit break resistance Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.4 | ||
| 561 | Ventilated façades | Determination of hard body impact resistance Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. G; EAD 040287-00-0404, čl. 2.2.7; EAD 040287-01-0404, čl. 2.2.10; EAD 090019-00-0404, čl. 2.2.7 | ||
| 562 | Ventilated façades | Determination of soft body impact resistance Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.6.4; EAD 090062-01-0404, příl. G; EAD 040287-00-0404, čl. 2.2.7; EAD 040287-01-0404, čl. 2.2.10; EAD 090019-00-0404, čl. 2.2.7 | ||
| 563 | Ventilated façades | Determination of resistance to hygrothermal action Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. M.1 | ||
| 564 | ETICS | Determination of pull- through resistance of fixings from profiles Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.13; EAD 090019-00-0404, příl. H; EAD 040083-00-0404, čl. 2.2.16; EAD 040083-01-0404, čl. 2.2.15 | ||
| 565 | ETICS on timber frame | Determination of moisture content and moisture gradient by gravimetry Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.2.4 | ||
| 566 | ETICS on timber frame | Determination of adhesion of adhesive and base plate Regulated area: Thermal insulation systems |
EAD 040089-00-0404, čl. 2.2.3.2 | ||
| 567 | ETICS | Determination of the pull- through resistance of anchors through insulation products Regulated area: Thermal insulation systems |
ČSN EN 16382 | ||
| 568 | ETICS | Determination of thermal- humidity behaviour Regulated area: Thermal insulation systems |
ČSN EN 16383 | ||
| 569 | ETICS | Determination of impact resistance Regulated area: Thermal insulation systems |
ČSN EN 134971+A1 | ||
| 570 | ETICS | Determination of the pull- off resistance by foam block test Regulated area: Thermal insulation systems |
ČSN EN 13495 | ||
| 571 | ETICS | Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material Regulated area: Thermal insulation systems |
ČSN EN 13494 | ||
| 572 | Bridges, bridge structures | Loading tests Regulated area: Loading tests of bridges, building structure and floors |
ČSN 73 6209 | ||
| 573 | Building structures and their parts | Static loading tests Regulated area: Loading tests of bridges, building structure and floors |
ČSN 73 2030, příl. A, B, C | ||
| 574 | Masonry | Determination of initial shear strength Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 1052-3 | ||
| 575 | Ancillary components for masonry, lintels | Determination of flexural resistance and shear resistance Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-9 ed. 2 | ||
| 576 | Ancillary components for masonry, lintels | Determination of dimensions and bow Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-11 | ||
| 577 | Masonry units | Determination of dimensions Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-16 | ||
| 578 | Masonry materials, burnt roofing | Determination of compression strength, flexural strength and load capacity Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2605 | ||
| 579 | Brick products | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2601 | ||
| 580 | Concrete roofing tiles | Determination of dimensional tolerances and mass Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.2, 5.5 | ||
| 581 | Concrete masonry units | Determination of percentage area of voids (by paper indentation) Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-2 | ||
| 582 | Burnt masonry elements for damp proof course units | Determination of water absorption by boiling in water Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-7 | ||
| 583 | Concrete masonry units and masonry units | Determination of water absorption due to capillary action and the initial rate of water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-11 | ||
| 584 | Masonry units | Determination of net volume and percentage of voids by hydrostatic weighing Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-3 | ||
| 585 | Masonry units | Determination of mass per unit volume Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-13 | ||
| 586 | Masonry units | Determination of moisture movement Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-14 | ||
| 587 | Precast concrete products | Determination of strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15435 | ||
| 588 | Brick products | Determination of mass, bulk density and water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2603 | ||
| 589 | Brick products | Determination of susceptibility to efflorescence Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2608 | ||
| 590 | Masonry units | Determination of flatness of faces Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-20 | ||
| 591 | Brick products | Determination of appearance and dimensions Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2602 | ||
| 592 | Brick products | Determination of presence of lime nodules Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2607 | ||
| 593 | Masonry units | Determination of compressive strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-1+A1 | ||
| 594 | Concrete roofing tiles | Determination of water permeability Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.7 | ||
| 595 | Concrete roofing tiles | Determination of mechanical resistance (transverse load bearing capacity) Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.6 | ||
| 596 | Concrete roofing tiles | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.8 | ||
| 597 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 598 | Hardened concrete | Hardened concrete sampling Regulated area: Sampling |
ČSN EN 12504-1, čl. 6 | ||
| 599 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1 | ||
| Testing Laboratory in Plzeň (0300) | |||||
| 600 | Fresh concrete | Slump test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-2 | ||
| 601 | Fresh concrete | Determination of degree of compactability Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-4 | ||
| 602 | Fresh concrete | Flow table test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-5 | ||
| 603 | Fresh concrete | Determination of air content by pressure method Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-7, čl. 6 | ||
| 604 | Concrete mixing water | Determination of suitability – initial assessment, humic substances Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 1008, čl. 6.1.1, 6.1.2 | ||
| 605 | Concrete mixing water | Determination of pH by potentiometry Regulated area: Concrete, admixtures and fibres for concrete |
ČSN ISO 10523 | ||
| 606 | Hardened concrete | Frost resistance test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1322 | ||
| 607 | Hardened concrete | Determination of resistance to water and chemical de- icing agents Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1326, metoda A, C | ||
| 608 | Hardened concrete | Testing of shapes and dimensions Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-1 | ||
| 609 | Hardened concrete | Determination of compressive strength of concrete, including the manufacture and treatment of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-2; ČSN EN 12390-3; ČSN EN 12504-1, mimo čl. 6 | ||
| 610 | Hardened concrete | Determination of compressive strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-3 | ||
| 611 | Hardened concrete | Determination of flexural strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-5 | ||
| 612 | Hardened concrete | Determination of the indirect tensile strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-6 | ||
| 613 | Hardened concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-7 | ||
| 614 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-8 | ||
| 615 | Hardened concrete | Determination of resistance to water and chemical de- icing agents Regulated area: Concrete, admixtures and fibres for concrete |
IP 0340T068 | ||
| 616 | Hardened concrete | Determination of compressive strength (samples of the structure) Regulated area: Concrete, admixtures and fibres for concrete |
IP 0600T013 (ČSN EN 12390-3) | ||
| 617 | Hardened concrete | Determination of compressive strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-1, mimo čl. 6 | ||
| 618 | Hardened concrete | Determination of rebound tester Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-2 | ||
| 619 | Hardened concrete | Test of compressive strength by hardness testing methods (Schmidt N. L.) Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1373 | ||
| 620 | Concrete and mortar additives | Determination of solids content by gravimetry Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-8 | ||
| 621 | Concrete and mortar additives | Determination of water- soluble chloride content by potentiometric titration Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-10 | ||
| 622 | Concrete and mortar additives | Determination of alkali content (Na+ , K+ and their sum) by FAAS method Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-12 | ||
| 623 | Autoclaved concrete | Determination of dry bulk density Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 678 | ||
| 624 | Aerated concrete | Determination of compression strength, flexural strength and concentric compressive strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 679 | ||
| 625 | Autoclaved aerated concrete | Determination of flexural strength during drying Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 1351, čl. 5 až 7 | ||
| 626 | Autoclaved aerated concrete | Determination of moisture content Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 1353, čl. 5 až 7 | ||
| 627 | Concrete products | Determination of dimensions Regulated area: Small concrete products |
ČSN EN 1338, příl. C; ČSN EN 1339, příl. C; ČSN EN 1340, příl. C | ||
| 628 | Concrete products | Determination of total water absorption Regulated area: Small concrete products |
ČSN EN 1338, příl. E; ČSN EN 1339, příl. E; ČSN EN 1340, příl. E | ||
| 629 | Concrete products | Determination of the indirect tensile strength Regulated area: Small concrete products |
ČSN EN 1338, příl. F; ČSN EN 3339, příl. F; ČSN EN 1340, příl. F | ||
| 630 | Concrete products | Determination of abrasiveness – Böhme Regulated area: Small concrete products |
ČSN EN 1338, příl. H; ČSN EN 1339, příl. H; ČSN EN 1340, příl. H; ČSN EN 13748-1, čl. 5.6.2; ČSN EN 13748-2, čl. 5.6.2 | ||
| 631 | Concrete products | Determination of resistance to freezing/thawing Regulated area: Small concrete products |
ČSN EN 1338, příl. D; ČSN EN 1339, příl. D; ČSN EN 1340, příl. D | ||
| 632 | Concrete products | Determination of dimensions Regulated area: Small concrete products |
ČSN EN 13748-1, čl. 5.2, 5.3, 5.4 | ||
| 633 | Concrete products | Determination of bending strength and fracture load Regulated area: Small concrete products |
ČSN EN 13748-1, čl. 5.5; ČSN EN 13748-2, čl. 5.5 | ||
| 634 | Concrete products | Determination of water absorption Regulated area: Small concrete products |
ČSN EN 13748-1, čl. 5.8 | ||
| 635 | Concrete products | Determination of dimensions Regulated area: Small concrete products |
ČSN EN 13748-2, čl. 5.2, 5.3, 5.4 | ||
| 636 | Building components | Determination of shapes, dimensions and appearance Regulated area: Concrete building components and structures |
ČSN 73 0212-5 | ||
| 637 | Concrete components | Determination of dimensions, shapes, top layer of reinforcement, crack width Regulated area: Concrete building components and structures |
ČSN EN 13369, příl. H; ČSN EN 13369:2013, příl. J | ||
| 638 | Concrete components | Determination of water absorption Regulated area: Concrete building components and structures |
ČSN EN 13369, příl. F; ČSN EN 13369:2013, příl. G | ||
| 639 | Lightweight and aerated concrete components | Determination of dimensions Regulated area: Concrete building components and structures |
ČSN EN 991 | ||
| 640 | Concrete pipes | Tests of strength and load bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 1916, příl. C | ||
| 641 | Concrete manholes | Tests of strength and load bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 1917, mimo příl. B | ||
| 642 | Lightweight and aerated concrete components (reinforced) | Test of corrosion protection of reinforcement Regulated area: Concrete building components and structures |
ČSN EN 990 | ||
| 643 | Building components | Determination of impact strength Regulated area: Concrete building components and structures |
ČSN 73 2035 | ||
| 644 | Building components | Determination of mass Regulated area: Concrete building components and structures |
ČSN 73 2045 | ||
| 645 | Concrete pipes | Determination of dimensional characteristics Regulated area: Concrete building components and structures |
ČSN EN 639 | ||
| 646 | Concrete pipes | Leakage tests Regulated area: Concrete building components and structures |
ČSN EN 1916, příl. E | ||
| 647 | Concrete manholes | Determination of watertightness Regulated area: Concrete building components and structures |
ČSN EN 1917, příl. C | ||
| 648 | Silicate materials | Determination of the loss of mass by drying by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0102 | ||
| 649 | Silicate materials | Determination of loss on ignition by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0103 | ||
| 650 | Silicate materials SiO2 > 98% | Determination of silicon dioxide by defumigation with hydrofluoric acid by gravimetric method Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0105-2 | ||
| 651 | Silicate materials SO3 0 to 10% | Determination of sulphate sulphur by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0117 | ||
| 652 | Silicate materials S 0 to 10% | Determination of total sulphur by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0118 | ||
| 653 | Aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-1 | ||
| 654 | Aggregates | Determination of various aggregate particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1180 | ||
| 655 | Aggregates | Determination of particle size distribution – sieving analysis Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-1 | ||
| 656 | Aggregates | Determination of particle shape - Shape index Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-4 | ||
| 657 | Coarse aggregates | Determination of percentage of crushed particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-5 | ||
| 658 | Aggregates | Determination of fine particle quality – sand equivalent test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-8+A1 | ||
| 659 | Aggregates | Test of grading of filler aggregates – air-jet sieving Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-10 | ||
| 660 | Coarse recycled aggregates | Classification of constituents Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-11 | ||
| 661 | Aggregates | Determination of resistance to fragmentation Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-2 | ||
| 662 | Aggregates | Determination of loose bulk density and voids Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-3 | ||
| 663 | Aggregates | Determination of the water content by drying in a ventilated oven Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-5 | ||
| 664 | Aggregates | Determination of particle density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-6 | ||
| 665 | Aggregates | Determination of particle density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-7 | ||
| 666 | Aggregates | Determination of resistance by magnesium sulphate Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-2 | ||
| 667 | Aggregates | Determination of thermal and weathering properties – boiling test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-3 | ||
| 668 | Aggregates | Determination of water- soluble chloride salts by Volhard method Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 7 | ||
| 669 | Aggregates | Determination of total sulphur content by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 11.1 | ||
| 670 | Aggregates | Determination of acid- soluble sulphate by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 12 | ||
| 671 | Aggregates | Determination of light particulate pollutants by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 14.2 | ||
| 672 | Aggregates | Determination of potential content of humus particles by colorimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 15.1 | ||
| 673 | Aggregates | Determination of durability by accelerated test with sodium sulphate Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1176, čl. 7 až 16 | ||
| 674 | Aggregates | Determination of resistance to fragmentation Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13450, příl. C | ||
| 675 | Aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13450, příl. F | ||
| 676 | Aggregates | Determination of resistance to magnesium sulphate Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13450, příl. G | ||
| 677 | Aggregates | Determination of resistance to fragmentation Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
OTP ČD 58979/04-013 | ||
| 678 | Lightweight aggregates | Determination of compression resistance Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13055, příl. C | ||
| 679 | Soils and backfills | Determination of relative density of non-cohesive soils Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1018 | ||
| 680 | Soils and backfills | Determination of the sum of organic substances by titration Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1021 | ||
| 681 | Stone | Determination of compressive strength Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1926 | ||
| 682 | Stone | Determination of real density and apparent density and of total and open porosity Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1936 | ||
| 683 | Soils and backfills | Determination of grain size Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN ISO 17892-4 | ||
| 684 | Soils and backfills | Determination of moisture content by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN ISO 17892-1 | ||
| 685 | Lightweight aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-7 | ||
| 686 | Metallic products | Tensile test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 6892-1; ČSN EN ISO 15630-1, čl. 5; ČSN EN ISO 15630-2, čl. 5 | ||
| 687 | Metallic products | Bend test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 7438; ČSN EN ISO 15630-1, čl. 6; ČSN EN ISO 15630-2, čl. 6 | ||
| 688 | Metallic products | Test of steel weldability – shear strength Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 15630-2, čl. 7 | ||
| 689 | Ceramic raw materials | Determination of pH by potentiometry Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN 72 1070 | ||
| 690 | Ceramic raw materials | Determination of moisture content by gravimetry Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN 72 1080 | ||
| 691 | Ceramic raw materials | Determination of whiteness photometrically Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN 72 1089 | ||
| 692 | Ceramic raw materials | Determination of abrasiveness by gravimetry Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN 72 1090 | ||
| 693 | Ceramic raw materials | Determination of thermal expansion Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN 72 6031 | ||
| 694 | Refractory materials and products | Determination of adhesiveness, length changes, amount of forming water Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN 72 6100 | ||
| 695 | Refractory materials and products | Determination of porosity and bulk density Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-1 | ||
| 696 | Refractory materials and products | Determination of density Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-2 | ||
| 697 | Refractory materials and products | Testing of carbon-containing refractories Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-3, mimo čl. 7.3.1 | ||
| 698 | Refractory materials and products | Determination of permeability to gases Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-4 | ||
| 699 | Refractory materials and products | Determination of compressive strength Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-5 | ||
| 700 | Refractory materials and products | Determination of bending strength Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-6 | ||
| 701 | Refractory materials and products | Determination of modulus of rupture at elevated temperatures Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-7 | ||
| 702 | Refractory materials and products | Determination of creep in compression Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-9 | ||
| 703 | Refractory materials and products | Determination of permanent change in dimensions on heating Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-10 | ||
| 704 | Refractory materials and products | Determination of resistance to temperature changes Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-11, čl. 4.1 | ||
| 705 | Refractory materials and products | Determination of refractoriness Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-12 | ||
| 706 | Refractory materials and products | Determination of thermal conductivity – hot-wire (parallel) method Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-15 | ||
| 707 | Refractory materials and products | Determination of resistance to sulphuric acid Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-16 | ||
| 708 | Refractory materials and products | Determination of bulk density of granular materials Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-18 | ||
| 709 | Refractory materials and products | Determination of thermal expansion Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 993-19 | ||
| 710 | Refractory materials and products | Determination of: - thickness - bulk density - reversible deformations - permanent length changes in heat and classification temperature - tensile strength - water and org. compound content Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 1094-1 | ||
| 711 | Refractory materials and products | Determination of porosity and bulk density Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 1094-4 | ||
| 712 | Refractory materials and products | Determination of permanent change in dimensions on heating Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 1094-6 | ||
| 713 | Flue liners operating under dry conditions | Determination of: - dimensions - compressive strength (load) - corrosion resistance - water absorption - bulk density Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 1457-1, mimo čl. 16.8, 16.12 | ||
| 714 | Flue liners operating under wet conditions | Determination of: - dimensions - compressive strength (load) - corrosion resistance - water absorption - bulk density - water vapour diffusion Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN 1457-2, mimo čl. 16.8, 16.12 | ||
| 715 | Refractory materials and products | Determination of refractoriness under load Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 1893 | ||
| 716 | Refractory materials and unshaped products | Determination of classification temperature Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 1927-1 | ||
| 717 | Refractory materials and unshaped products | Determination of: - particle size distribution - humidity - workability index Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 1927-3 | ||
| 718 | Refractory materials and unshaped products | Determination of consistency, workable life Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 1927-4 | ||
| 719 | Refractory materials and unshaped products | Determination of: - bulk density - density and porosity - flexural strength - compressive strength - permanent length changes - load capacity in heat - creep in pressure Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 1927-6 | ||
| 720 | Refractory materials and unshaped products | Determination of: - dimensions - visual defects - humidity - annealing losses - speed of ultrasound propagation Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 1927-7, mimo čl. 7.2.1; 7.2.2 | ||
| 721 | Refractory materials and unshaped products | Determination of: - resistance to sudden changes in temperature - thermal conductivity - resistance to sulphuric acid - weight loss by carbonization - residual carbon content - carbon yield - abrasion Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 1927-8 | ||
| 722 | Refractory materials and products | Determination of thermal conductivity – by hot-wire method – cross array Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 8894-1 | ||
| 723 | Refractory materials and products | Determination of compressive strength Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 8895 | ||
| 724 | Refractory magnesium and dolomite materials and products | Determination of MnO, CaO, Cr2O3, Na2O, K2O by FAAS method Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 10058-3, kap. 4 | ||
| 725 | Refractory materials and products | Measurement of dimensions Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN ISO 12678-1 | ||
| 726 | Refractory materials and products | Measurement of dimensions and external defects Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN ISO 12678-2 | ||
| 727 | Refractory materials and products | Determination of melt corrosion Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN P CEN/TS 15418, postup A | ||
| 728 | Refractory materials and products | Determination of resistance to abrasion Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 16282 | ||
| 729 | Refractory chromium materials and products | Determination of MnO, CaO, Cr2O3, Na2O, K2O by FAAS method Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 20565-3, kap. 4 | ||
| 730 | Refractory materials and products containing silicon carbide | Determination of C, SiC by gravimetry Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 21068-2, kap. 4, 5, 6, 7 | ||
| 731 | Refractory materials and products containing silicon carbide | Determination of SiO2, Al2O3, TiO2, Fe2O3, CaO, MgO, Na2O, K2O, Cr2O3, ZrO2by FAAS method Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 21068-3, čl. 7.3, 8.5 | ||
| 732 | Refractory materials and products containing zirconium dioxide | Determination of CaO, MgO, Na2O, K2O, Cr2O3 by FAAS method Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 21079-3, kap. 4 | ||
| 733 | Refractory aluminosilicate materials and products | Determination of phosphorus oxide photometrically Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 21587-2, kap. 14 | ||
| 734 | Refractory aluminosilicate materials and products | Determination of SiO2, Al2O3, TiO2, Fe2O3, CaO, MgO, Na2O, K2O, ZrO2, Cr2O3, MnO by FAAS method Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
ČSN EN ISO 21587-3, kap. 14 až 19, příl. NA | ||
| 735 | Refractory materials and products | Determination of refractoriness under load Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
DIN 51064 | ||
| 736 | Refractory materials and products | Determination of resistance to temperature changes Regulated area: Chimneys, chimney sheaths and flues, refractory materials and products, ceramic raw materials |
DIN 51068-1 | ||
| 737 | Mortars | Frost resistance test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 2452 | ||
| 738 | Fresh mortar | Determination of consistence by flow table Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-3 | ||
| 739 | Fresh mortar | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-6 | ||
| 740 | Hardened mortars | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-10 | ||
| 741 | Screed materials | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.2 | ||
| 742 | Hardened mortars | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 8 | ||
| 743 | Screed materials | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.1 | ||
| 744 | Cement mortars and adhesives | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.3 | ||
| 745 | Hardened mortars | Determination of capillary water absorption coefficient Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-18 | ||
| 746 | Mortars and dispersion adhesives | Measurement of bond strength by shear test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.4 | ||
| 747 | Mortars and adhesives based on reactive resins | Measurement of bond strength by shear test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.5 | ||
| 748 | Screed materials | Determination of abrasion resistance (Böhme) Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-3 | ||
| 749 | Drainage channels for vehicular and pedestrian areas | Load test Regulated area: Draining elements |
ČSN EN 1433, čl. 9.1 | ||
| 750 | Drainage channels for vehicular and pedestrian areas | Determination of dimensions and shape Regulated area: Draining elements |
ČSN EN 1433, čl. 9.3 | ||
| 751 | Gully tops and manhole tops | Determination of dimensions, shapes Regulated area: Draining elements |
ČSN EN 124-1, čl. 8.4 | ||
| 752 | Gully tops and manhole tops | Determination of load- bearing capacity Regulated area: Draining elements |
ČSN EN 124-1, příl. B | ||
| 753 | Gully tops and manhole tops | Determination of permanent set Regulated area: Draining elements |
ČSN EN 124-1, příl. A | ||
| 754 | Gully tops and manhole tops | Determination of tilt height Regulated area: Draining elements |
ČSN EN 124-1, příl. D | ||
| 755 | Gully tops and manhole tops | Determination of vertical pull-out force and vertical movement of fixings Regulated area: Draining elements |
ČSN EN 124-1, příl. E | ||
| 756 | Gully tops and manhole tops | Determination of deflection under load Regulated area: Draining elements |
ČSN EN 124-3, příl. A; ČSN EN 124-5, příl. A | ||
| 757 | Cement, masonry cement | Determination of fineness of grinding, specific surface and density Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-6 | ||
| 758 | Cement, masonry cement | Determination of the loss on ignition by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.4.1 | ||
| 759 | Cement, masonry cement | Determination of the content of sulphate by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.4.2 | ||
| 760 | Cement, masonry cement | Determination of chlorides by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.16 | ||
| 761 | Ash, cinder, slag and other silicate materials | Determination of efficiency index Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 450-1, čl. 3.5, 5.3.2 | ||
| 762 | Building ceramics | Determination of dimensions Regulated area: Construction and sanitary ceramics |
ČSN 72 4710, čl. 5.1 | ||
| 763 | Building ceramics | Determination of squareness and angles Regulated area: Construction and sanitary ceramics |
ČSN 72 4710, čl. 5.2 | ||
| 764 | Building ceramics | Determination of straightness and curvature Regulated area: Construction and sanitary ceramics |
ČSN 72 4710, čl. 5.3 | ||
| 765 | Building ceramics | Determination of surface quality Regulated area: Construction and sanitary ceramics |
ČSN 72 4710, čl. 5.4 | ||
| 766 | Building ceramics | Determination of impact strength Regulated area: Construction and sanitary ceramics |
ČSN 72 4710, čl. 5.7 | ||
| 767 | Building ceramics | Determination of resistance to temperature changes Regulated area: Construction and sanitary ceramics |
ČSN 72 4710, čl. 5.9 | ||
| 768 | Sanitary ceramics | Determination of dimensions, shapes and appearance Regulated area: Construction and sanitary ceramics |
ČSN 72 4841, čl. 3, 5 | ||
| 769 | Sanitary ceramics | Determination of density criteria – absorption power, bulk density, porosity Regulated area: Construction and sanitary ceramics |
ČSN 72 4841, čl. 6 | ||
| 770 | Sanitary ceramics | Determination of glaze chemical resistance Regulated area: Construction and sanitary ceramics |
ČSN 72 4841, čl. 7 | ||
| 771 | Sanitary ceramics | Determination of thermal resistance Regulated area: Construction and sanitary ceramics |
ČSN 72 4841, čl. 8 | ||
| 772 | Sanitary ceramics | Determination of strength and strength characteristics Regulated area: Construction and sanitary ceramics |
ČSN 72 4841, čl. 9 | ||
| 773 | Sanitary ceramics | Determination of functional properties – flushing, odour trap function, water flow through the overflow channel Regulated area: Construction and sanitary ceramics |
ČSN 72 4841, čl. 10 | ||
| 774 | Building ceramics | Determination of density criteria – absorption power, bulk density, porosity Regulated area: Construction and sanitary ceramics |
ČSN 72 5010 | ||
| 775 | Floor coverings | Determination of slipperiness Regulated area: Construction and sanitary ceramics |
ČSN 72 5191; ČSN EN 1338, příl. I; ČSN EN 1339, příl. I; ČSN EN 1340, příl. I; ČSN EN 13748-1, čl. 5.7; ČSN EN 13748-2, čl. 5.7; ČSN EN 13893; ČSN EN 14231; DIN 51097; DIN 51130 | ||
| 776 | Building ceramics | Determination of geometrical parameters, surface quality, absorption power, compressive and bending strength, shard resistance to acids Regulated area: Construction and sanitary ceramics |
ČSN 72 5250 | ||
| 777 | Floor coverings | Determination of slip/skid resistance Regulated area: Construction and sanitary ceramics |
ČSN EN 13036-4 | ||
| 778 | Sanitary ceramics | Determination of functional characteristics – depth of water seal Regulated area: Construction and sanitary ceramics |
ČSN EN 13407+A1, čl. 6.6.1.2 | ||
| 779 | Sanitary ceramics | Determination of functional characteristics – sawdust test Regulated area: Construction and sanitary ceramics |
ČSN EN 13407+A1, čl. 6.6.1.3.1 | ||
| 780 | Sanitary ceramics | Determination of functional characteristics – test by flushing of 3 plastic balls Regulated area: Construction and sanitary ceramics |
ČSN EN 13407+A1, čl. 6.6.1.3.2 | ||
| 781 | Sanitary ceramics | Determination of functional characteristics – oversplashing test Regulated area: Construction and sanitary ceramics |
ČSN EN 13407+A1, čl. 6.6.1.3.3 | ||
| 782 | Sanitary ceramics | Determination of functional characteristics – discharge test Regulated area: Construction and sanitary ceramics |
ČSN EN 13407+A1, čl. 6.6.1.3.4 | ||
| 783 | Sanitary ceramics | Determination of water absorption Regulated area: Construction and sanitary ceramics |
ČSN EN 13407+A1, čl. 6.6.2 | ||
| 784 | Sanitary ceramics | Determination of static load resistance Regulated area: Construction and sanitary ceramics |
ČSN EN 13407+A1, čl. 6.6.3 | ||
| 785 | Floor coverings | Determination of slipperiness Regulated area: Construction and sanitary ceramics |
ČSN EN 1344, čl. 4.2.5 | ||
| 786 | Floor coverings | Slip resistance test Regulated area: Construction and sanitary ceramics |
ČSN EN 13451-1+A1 | ||
| 787 | Road marking, traffic signs | Determination of slip/skid resistance Regulated area: Construction and sanitary ceramics |
ČSN EN 1436, příl. D | ||
| 788 | Sanitary ceramics | Determination of dimensions, shapes and appearance Regulated area: Construction and sanitary ceramics |
ČSN EN 14428+A1, čl. 5.1, 5.2 | ||
| 789 | Sanitary ceramics | Determination of shatter resistance Regulated area: Construction and sanitary ceramics |
ČSN EN 14428+A1, čl. 5.1, 5.2, 5.3 | ||
| 790 | Sanitary ceramics | Determination of cleanability Regulated area: Construction and sanitary ceramics |
ČSN EN 14428+A1, čl. 5.3; ČSN EN 14528+A1, čl. 5.3; ČSN EN 14688+A1, čl. 5.5, 5.8 | ||
| 791 | Sanitary ceramics | Determination of resistance to chemicals Regulated area: Construction and sanitary ceramics |
ČSN EN 14428+A1, čl. 5.3 | ||
| 792 | Sanitary ceramics | Determination of resistance to wet and dry cycling Regulated area: Construction and sanitary ceramics |
ČSN EN 14428+A1, čl. 5.4 | ||
| 793 | Sanitary ceramics | Determination of surface quality Regulated area: Construction and sanitary ceramics |
ČSN EN 14527, čl. 4.2.1 | ||
| 794 | Sanitary ceramics | Determination of functional characteristics Regulated area: Construction and sanitary ceramics |
ČSN EN 14527, čl. 5.1 | ||
| 795 | Sanitary ceramics | Determination of resistance to chemicals Regulated area: Construction and sanitary ceramics |
ČSN EN 14527, čl. 5.2 | ||
| 796 | Sanitary ceramics | Determination of dimensions Regulated area: Construction and sanitary ceramics |
ČSN EN 14528+A1, čl. 4.1 | ||
| 797 | Sanitary ceramics | Loading tests – static loading Regulated area: Construction and sanitary ceramics |
ČSN EN 14528+A1, čl. 5.2 | ||
| 798 | Sanitary ceramics | Determination of flow rate of overflow Regulated area: Construction and sanitary ceramics |
ČSN EN 14528+A1, čl. 5.4 | ||
| 799 | Agglomerated stone | Determination of linear thermal expansion coefficient Regulated area: Construction and sanitary ceramics |
ČSN EN 14617-11 | ||
| 800 | Agglomerated stone | Determination of dimensional stability and deformations Regulated area: Construction and sanitary ceramics |
ČSN EN 14617-12 | ||
| 801 | Agglomerated stone | Determination of resistance to impact Regulated area: Construction and sanitary ceramics |
ČSN EN 14617-9 | ||
| 802 | Sanitary ceramics | Determination of static load resistance Regulated area: Construction and sanitary ceramics |
ČSN EN 14688+A1, čl. 4.1 | ||
| 803 | Sanitary ceramics | Determination of water draining Regulated area: Construction and sanitary ceramics |
ČSN EN 14688+A1, čl. 4.2, 4.7, 5.3, 5.9 | ||
| 804 | Sanitary ceramics | Determination of resistance to scratching Regulated area: Construction and sanitary ceramics |
ČSN EN 14688+A1, čl. 5.6 | ||
| 805 | Sanitary ceramics | Determination of abrasion resistance Regulated area: Construction and sanitary ceramics |
ČSN EN 14688+A1, čl. 5.7 | ||
| 806 | Sanitary ceramics | Determination of functional properties: height of water seal, flushing tests, water absorption, load test, tests of tank flushers (flushing volume, tightness against water leakage, reliability of drain valve, overflow capacity, dimensions) Regulated area: Construction and sanitary ceramics |
ČSN EN 997, čl. 5.7 | ||
| 807 | Sanitary ceramics | Determination of density criteria – absorption power, bulk density, porosity Regulated area: Construction and sanitary ceramics |
ČSN EN 997, čl. 5.7.3 | ||
| 808 | Sanitary ceramics | Determination of strength and strength characteristics Regulated area: Construction and sanitary ceramics |
ČSN EN 997, čl. 5.7.4 | ||
| 809 | Building ceramics | Determination of moisture expansion Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-10 | ||
| 810 | Building ceramics | Determination of crazing resistance for glazed tiles Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-11 | ||
| 811 | Building ceramics | Determination of frost resistance Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-12 | ||
| 812 | Building ceramics | Determination of chemical resistance at room temperature visually Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-13 | ||
| 813 | Building ceramics | Determination of resistance to stains visually Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-14 | ||
| 814 | Building ceramics | Determination of length, width, thickness, straightness of face edges, squareness of edges, flatness of face surfaces and surface quality (defects and intentional effects) Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-2 | ||
| 815 | Building ceramics | Determination of density criteria – absorption power, apparent porosity, apparent density, bulk density Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-3 | ||
| 816 | Building ceramics | Determination of bending strength and fracture load Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-4 | ||
| 817 | Building ceramics | Determination of impact strength Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-5 | ||
| 818 | Building ceramics | Determination wear resistance – abrasiveness Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-6 | ||
| 819 | Building ceramics | Determination surface wear resistance Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-7 | ||
| 820 | Building ceramics | Determination of linear thermal expansion coefficient Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-8 | ||
| 821 | Building ceramics | Determination of resistance to sudden temperature changes Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-9 | ||
| 822 | Floor coverings | Determination of slip resistance of pedestrian surfaces Regulated area: Construction and sanitary ceramics |
ČSN EN 16165 | ||
| 823 | Sanitary ceramics | Determination of lead extractability by FAAS method Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-15 | ||
| 824 | Sanitary ceramics | Determination of cadmium extractability by FAAS method Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-15 | ||
| 825 | Gully tops and manhole tops | Determination of slipperiness Regulated area: Construction and sanitary ceramics |
ČSN EN 124-1, příl. C | ||
| 826 | Grouts for tiles | Determination of resistance to abrasion Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 827 | Thermal insulating products | Determination of maximum service temperature Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 18097 | ||
| 828 | Railings | Determination of impact resistance Regulated area: Loading tests of bridges, building structure and floors |
ČSN 74 3305, příl. B | ||
| 829 | Masonry | Determination of compressive strength Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 1052-1 | ||
| 830 | Ancillary components for masonry, lintels | Determination of flexural resistance and shear resistance Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-9 ed. 2 | ||
| 831 | Ancillary components for masonry, lintels | Determination of dimensions and bow Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-11 | ||
| 832 | Masonry units | Determination of dimensions Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-16 | ||
| 833 | Masonry units | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-18 | ||
| 834 | Concrete masonry units | Determination of percentage area of voids (by paper indentation) Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-2 | ||
| 835 | Calcium silicate masonry units | Determination of net volume and percentage of voids and material by filling the voids with sand Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-9 | ||
| 836 | Calcium silicate masonry units, aerated concrete units | Determination of moisture content by gravimetry Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-10 | ||
| 837 | Concrete masonry units and burnt masonry units | Determination of water absorption due to capillary action and the initial rate of water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-11 | ||
| 838 | Masonry units | Determination of mass per unit volume Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-13 | ||
| 839 | Clay pavers | Determination of transversal fracture load Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 1344, příl. D | ||
| 840 | Clay pavers | Determination of grindability Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 1344, příl. E | ||
| 841 | Clay pavers | Determination of geometrical characteristics Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 1344, příl. B | ||
| 842 | Masonry units | Determination of moisture movement Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-14 | ||
| 843 | Masonry units | Determination of flatness of faces Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-20 | ||
| 844 | Autoclaved aerated concrete | Determination of drying shrinkage Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 680 | ||
| 845 | Concrete masonry units | Determination of flexural strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-6 | ||
| 846 | Masonry units | Determination of the content of active soluble salts Na+ , K+ , Mg2+ by FAAS method Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-5 ed. 2 | ||
| 847 | Masonry units | Determination of compressive strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-1+A1 | ||
| 848 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 849 | Hardened concrete | Hardened concrete sampling Regulated area: Sampling |
ČSN EN 12504-1, čl. 6 | ||
| 850 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1 | ||
| Testing Laboratory in Teplice (0400) | |||||
| 851 | Working environment | Measurement of noise Regulated area: Acoustics |
ČSN EN ISO 9612; Věstník MZ ČR, 2013, částka 4, část 4 | ||
| 852 | Non-working environment | Measurement of noise Regulated area: Acoustics |
ČSN ISO 1996-1; ČSN ISO 1996-2; Věstník MZ ČR, 2023, částka 14, část 3 | ||
| 853 | Building structures | Determination of airborne sound insulation Regulated area: Acoustics |
ČSN EN ISO 16283-3; ČSN EN ISO 10140-2; ČSN EN ISO 10140-4; ČSN EN ISO 16283-1; ČSN EN 1793-2 | ||
| 854 | Building structures with floors | Determination of impact sound insulation Regulated area: Acoustics |
ČSN EN ISO 16283-2; ČSN EN ISO 10140-3 | ||
| 855 | Acoustical structures and products | Determination of sound absorption Regulated area: Acoustics |
ČSN EN ISO 354; ČSN EN 1793-1 | ||
| 856 | Materials for acoustics | Determination of airflow resistance Regulated area: Acoustics |
ČSN EN ISO 9053-1 | ||
| 857 | Rooms and halls | Determination of reverberation time Regulated area: Acoustics |
ČSN EN ISO 3382-2 | ||
| 858 | Rooms and halls | Measurement of sound pressure level Regulated area: Acoustics |
ČSN EN ISO 16032 | ||
| 859 | Materials used under floating floors | Determination of dynamic stiffness Regulated area: Acoustics |
ČSN ISO 9052-1 | ||
| 860 | Road traffic noise reducing devices | Determination of in situ values of sound reflection under direct sound field conditions Regulated area: Acoustics |
ČSN EN 1793-5 | ||
| 861 | Road traffic noise reducing devices | Determination of in situ values of airborne sound insulation under direct sound field conditions Regulated area: Acoustics |
ČSN EN 1793-6 | ||
| 862 | Noise reducing devices | Determination of insertion loss Regulated area: Acoustics |
ČSN ISO 10847 | ||
| 863 | Micro offices | Measurement of speech level reduction Regulated area: Acoustics |
ISO 23351-1 | ||
| 864 | Road traffic noise reducing devices | Determination of in situ values of sound diffraction Regulated area: Acoustics |
ČSN EN 1793-4 | ||
| 865 | Fresh concrete | Slump test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-2 | ||
| 866 | Fresh concrete | Flow table test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-5 | ||
| 867 | Fresh concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-6 | ||
| 868 | Fresh concrete | Determination of air content by pressure method Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-7, čl. 6 | ||
| 869 | Hardened concrete | Determination of tensile strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1318 | ||
| 870 | Hardened concrete | Determination of resistance to water and chemical de- icing agents Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1326, metoda A, C | ||
| 871 | Hardened concrete | Determination of shapes and dimensions Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-1 | ||
| 872 | Hardened concrete | Determination of compressive strength, including the manufacture and treatment of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-2; ČSN EN 12390-3; ČSN EN 12504-1, mimo čl. 6 | ||
| 873 | Hardened concrete | Determination of compressive strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-3 | ||
| 874 | Hardened concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-7 | ||
| 875 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-8 | ||
| 876 | Hardened concrete | Determination of moisture content, absorption power and capillarity Regulated area: Concrete, admixtures and fibres for concrete |
IP 0400T013 (ČSN 73 1316:2003) | ||
| 877 | Hardened concrete | Determination of watertightness Regulated area: Concrete, admixtures and fibres for concrete |
IP 0400T014 (ČSN 73 1321:2003) | ||
| 878 | Hardened concrete | Determination of compressive strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-1, mimo čl. 6 | ||
| 879 | Hardened concrete | Determination of rebound tester Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-2 | ||
| 880 | Hardened concrete | Determination of compressive strength by hardness testing methods (Schmidt N. L.) Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1373; ČSN 73 2011 | ||
| 881 | Bridges, surface layers | Determination of adhesion, tensile strength and impermeability Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 6242, příl. B | ||
| 882 | Hardened concrete | Determination of static modulus of elasticity in compression Regulated area: Concrete, admixtures and fibres for concrete |
ČSN ISO 1920-10 | ||
| 883 | Building components | Determination of shapes, dimensions and appearance Regulated area: Concrete building components and structures |
ČSN 73 0212-5 | ||
| 884 | Concrete manholes | Tests of strength and load bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 1917, mimo příl. C, D | ||
| 885 | Building materials | Measurement and evaluation of the content of natural radionuclides 226 Ra, 40 K, 228 Th by gamma-ray spectrometry. Determination of mass activity index by calculation from measured values Regulated area: Physical factors |
Doporučení SÚJB DR-RO-5.2 (Rev. 0.0) | ||
| 886 | Silicate materials | Determination of the loss of mass by drying by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0102 | ||
| 887 | Silicate materials | Determination of loss on ignition by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0103 | ||
| 888 | Silicate materials | Determination of silicon dioxide by defumigation with hydrofluoric acid by gravimetric method Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0105-2 | ||
| 889 | Silicate materials | Determination of sulphate sulphur by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0117 | ||
| 890 | Silicate materials | Determination of total sulphur by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0118 | ||
| 891 | Aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-1 | ||
| 892 | Aggregates | Determination of various aggregate particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1180 | ||
| 893 | Aggregates | Determination of particle size distribution – sieving analysis Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-1 | ||
| 894 | Aggregates | Determination of particle shape - Shape index Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-4 | ||
| 895 | Coarse aggregates | Determination of percentage of crushed particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-5 | ||
| 896 | Aggregates | Determination of fine particle quality – methylene blue test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-9 | ||
| 897 | Aggregates | Determination of resistance to fragmentation Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-2, čl. 1 až 5 | ||
| 898 | Aggregates | Determination of loose bulk density and voids Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-3 | ||
| 899 | Aggregates | Determination of the water content by drying in a ventilated oven Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-5 | ||
| 900 | Aggregates | Determination of particle density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-6, příl. A, B | ||
| 901 | Aggregates | Determination of the particle density of filler - Pycnometer method Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-7 | ||
| 902 | Aggregates | Determination of thermal and weathering properties – boiling test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-3 | ||
| 903 | Aggregates | Determination of water- soluble chloride salts by Volhard method and Mohr method Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 7, 9 | ||
| 904 | Aggregates | Determination of water- soluble sulphate by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 10 | ||
| 905 | Aggregates | Determination of total sulphur content by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 11 | ||
| 906 | Aggregates | Determination of acid- soluble sulphate by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 12 | ||
| 907 | Aggregates | Determination of potential content of humus particles by colorimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 15.1 | ||
| 908 | Aggregates | Determination of water solubility by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 16 | ||
| 909 | Aggregates | Determination of the loss on ignition by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 17 | ||
| 910 | Aggregates | Test for filler aggregate – delta ring and ball test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13179-1 | ||
| 911 | Soils and backfills | Determination of compactability – Proctor compaction Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13286-2, metoda A, B | ||
| 912 | Hydraulically bound mixtures of soils and backfills | Determination of compressive strength Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13286-41 | ||
| 913 | Soils and backfills | Determination of the California Bearing Ratio and linear swelling Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13286-47 | ||
| 914 | Hydraulically bound mixtures of soils and backfills | Determination of compressive strength Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13286-53 | ||
| 915 | Soils and backfills | Determination of apparent density of solid particles by pycnometry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN ISO 17892-3 | ||
| 916 | Soils and backfills | Determination of grain size Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN ISO 17892-4 | ||
| 917 | Soils and backfills | Determination of moisture content by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN ISO 17892-1 | ||
| 918 | Aggregates | Determination of fine particle quality – sand equivalent test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-8+A1 | ||
| 919 | Coarse recycled aggregates | Classification of constituents Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-11 | ||
| 920 | Masonry mortars | Determination of freeze resistance Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 2452 | ||
| 921 | Fresh mortar | Determination of consistence by flow table Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-3 | ||
| 922 | Fresh mortar | Determination of consistence by plunger penetration Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-4 | ||
| 923 | Fresh mortar | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-6 | ||
| 924 | Fresh mortar | Determination of air content Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-7 | ||
| 925 | Dry hardened mortars | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-10 | ||
| 926 | Dry hardened mortars | Determination of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 9 | ||
| 927 | Dry hardened mortars | Determination of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 8 | ||
| 928 | Dry hardened mortars | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-12 | ||
| 929 | Cement mortars and adhesives | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.3 | ||
| 930 | Mortars | Determination of water- soluble chloride by titration Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-17 | ||
| 931 | Hardened mortars | Determination of capillary water absorption coefficient Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-18 | ||
| 932 | Mortars and adhesives | Determination of slip Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.2 | ||
| 933 | Mortars and adhesives | Determination of open time Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.1 | ||
| 934 | Injection mortars | Determination of bleeding, volume changes, fluidity and compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 445, čl. 4.3.1 | ||
| 935 | Renovation materials | Determination of carbonation depth Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 14630 | ||
| 936 | Bitumen | Determination of softening point by ring method Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 1427 | ||
| 937 | Cement | Determination of normal consistency and setting time Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 1 až 6 | ||
| 938 | Cement | Determination of volume stability Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 7 | ||
| 939 | Cement | Determination of strength Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-1 | ||
| 940 | Cement | Determination of fineness of grinding, specific surface and density Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 2113, čl. 10 až 16; ČSN EN 196-6 | ||
| 941 | Cement | Determination of the loss on ignition by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.4.1 | ||
| 942 | Cement | Determination of the content of sulphate by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.4.2 | ||
| 943 | Cement | Determination of insoluble residue by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.4.3, 4.4.4 | ||
| 944 | Cement | Determination of sulphide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.4.5 | ||
| 945 | Cement | Determination of silicon dioxide by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.2, 4.5.3, 4.5.5, 4.5.6 | ||
| 946 | Cement | Determination of iron oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.10 | ||
| 947 | Cement | Determination of aluminium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.11 | ||
| 948 | Cement | Determination of calcium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.14 | ||
| 949 | Cement | Determination of magnesium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.15 | ||
| 950 | Cement | Determination of the alkali content by photometry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.19 | ||
| 951 | Cement | Determination of chlorides by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.16 | ||
| 952 | Cement | Determination of water soluble chromium (Cr6+ ) by spectrophotometry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-10 | ||
| 953 | Cement | Determination of consistency, penetration, water retention and air content by standard mortar test Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 413-2 | ||
| 954 | Cement | Determination of hydratation heat – dissolving heat Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-8 | ||
| 955 | Cement | Determination of pozzolanicity Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-5 | ||
| 956 | Ash, slag, cinder and other silicate materials | Determination of bulk density (loose, bulk) Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 2071, čl. 11.1, 11.2 | ||
| 957 | Ash, slag, cinder and other silicate materials | Determination of volume stability Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 450-1, čl. 5.3.3 | ||
| 958 | Ash, slag, cinder and other silicate materials | Determination of efficiency index Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 450-1, čl. 3.5, 5.3.2 | ||
| 959 | Ash, slag, cinder and other silicate materials | Determination of fineness by wet sieving Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 451-2 | ||
| 960 | Ash, slag, cinder and other silicate materials | Determination of silicon dioxide by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0105-1 | ||
| 961 | Ash, slag, cinder and other silicate materials | Determination of silicon dioxide by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0106 | ||
| 962 | Ash, slag, cinder and other silicate materials | Determination of acid- indecomposable share by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0107 | ||
| 963 | Ash, slag, cinder and other silicate materials | Determination of free calcium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 451-1 | ||
| 964 | Ash, slag, cinder and other silicate materials | Determination of humidity of slag by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 15167-1, příl. A | ||
| 965 | Ash, slag, cinder and other silicate materials | Determination of calcium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0113-1 | ||
| 966 | Ash, slag, cinder and other silicate materials | Determination of calcium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0113-2 | ||
| 967 | Ash, slag, cinder and other silicate materials | Determination of calcium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0113-3 | ||
| 968 | Ash, slag, cinder and other silicate materials | Determination of magnesium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0114-1 | ||
| 969 | Ash, slag, cinder and other silicate materials | Determination of magnesium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0114-2 | ||
| 970 | Ash, slag, cinder and other silicate materials | Determination of magnesium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0114-3 | ||
| 971 | Lime | Determination of grain size Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.1, 7.2 | ||
| 972 | Lime | Determination of reactivity Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.6 | ||
| 973 | Lime | Determination of volume stability Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.4 | ||
| 974 | Lime | Determination of consistency, penetration, water retention, air content by standard mortar test Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.8 až 7.10 | ||
| 975 | Ash, slag, cinder and other silicate materials | Determination of the effect of fly ash on setting of cement Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 2071, čl. 11.9; ČSN 72 2080, čl. 11.10 | ||
| 976 | Gypsum binders | Determination of compressive and bending strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN 72 2301, čl. 7, 8 | ||
| 977 | Gypsum binders | Determination of initial and final setting times Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN 72 2301, čl. 6 | ||
| 978 | Gypsum binders | Determination of fineness of grinding Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN 72 2301, čl. 5 | ||
| 979 | Rock gypsum and anhydride | Determination of humidity, bound water and SO3 by gravimetry Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN 72 1206, čl. 21 až 33 | ||
| 980 | Grouts for tiles | Determination of flexural and compressive strength Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 981 | Grouts for tiles | Determination of shrinkage Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 982 | Grouts for tiles | Determination of water absorption Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 983 | Road traffic noise reducing devices | Load resistance test Regulated area: Road equipment, road signs, lighting poles |
ČSN EN 1794-1:2004, příl. A, B, C, E | ||
| 984 | Road traffic noise reducing devices | Impact test – danger of falling debris Regulated area: Road equipment, road signs, lighting poles |
ČSN EN 1794-2:2004, příl. B | ||
| 985 | Road traffic noise reducing devices | Determination of gloss value Regulated area: Road equipment, road signs, lighting poles |
ČSN EN 1794-2, příl. E; ČSN EN ISO 2813 | ||
| 986 | Bridges | Loading tests Regulated area: Loading tests of bridges, building structure and floors |
ČSN 73 6209 | ||
| 987 | Building structures and their parts | Static loading tests Regulated area: Loading tests of bridges, building structure and floors |
ČSN 73 2030, příl. A, B, C | ||
| 988 | Ancillary components for masonry, lintels | Determination of flexural resistance and shear resistance Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-9 ed. 2 | ||
| 989 | Ancillary components for masonry, lintels | Determination of dimensions and bow Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-11 | ||
| 990 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 991 | Hardened concrete | Hardened concrete sampling Regulated area: Sampling |
ČSN EN 12504-1, čl. 6 | ||
| 992 | Cement and ash | Sampling of cement and fly ash Regulated area: Sampling |
ČSN EN 196-7 | ||
| 993 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1 | ||
| Testing Laboratory in Předměřice n. L. (0500) | |||||
| 994 | Fresh concrete | Slump test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-2 | ||
| 995 | Fresh concrete | Flow table test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-5 | ||
| 996 | Fresh concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-6 | ||
| 997 | Fresh concrete | Determination of air content by pressure method Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-7, čl. 6 | ||
| 998 | Hardened concrete | Determination of resistance to water and chemical de- icing agents Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1326, metoda A, C | ||
| 999 | Hardened concrete | Determination of compressive strength, including the manufacture and treatment of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-2; ČSN EN 12390-3; ČSN EN 12504-1, mimo čl. 6 | ||
| 1000 | Hardened concrete | Determination of the indirect tensile strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-6 | ||
| 1001 | Hardened concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-7 | ||
| 1002 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-8 | ||
| 1003 | Hardened concrete | Test of compressive strength by hardness testing methods (Schmidt N. L.) Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1373 | ||
| 1004 | Concrete products | Determination of dimensions Regulated area: Small concrete products |
ČSN EN 1339, příl. C; ČSN EN 1340, příl. C | ||
| 1005 | Concrete products | Determination of bending strength and fracture load Regulated area: Small concrete products |
ČSN EN 1339, příl. F | ||
| 1006 | Concrete products | Determination of bending strength Regulated area: Small concrete products |
ČSN EN 1340, příl. F | ||
| 1007 | Concrete components | Determination of dimensions, shapes, top layer of reinforcement, crack width Regulated area: Concrete building components and structures |
ČSN EN 13369, příl. H; ČSN EN 13369:2013, příl. J | ||
| 1008 | Concrete pipes | Tests of strength and load bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 1916, příl. C | ||
| 1009 | Concrete manholes | Tests of strength and load bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 1917, příl. A | ||
| 1010 | Concrete pipes | Water absorption tests Regulated area: Concrete building components and structures |
ČSN EN 1916, příl. F | ||
| 1011 | Concrete manholes | Determination of total water absorption Regulated area: Concrete building components and structures |
ČSN EN 1917, příl. D | ||
| 1012 | Sheets for waterproofing | Determination of length, width and straightness Regulated area: Materials, products and waterproofing systems |
ČSN EN 1848-1 | ||
| 1013 | Sheets for waterproofing | Determination of thickness Regulated area: Materials, products and waterproofing systems |
ČSN EN 1849-1, čl. 4 | ||
| 1014 | Sheets for waterproofing | Determination of mass per unit area Regulated area: Materials, products and waterproofing systems |
ČSN EN 1849-1, čl. 5 | ||
| 1015 | Sheets for waterproofing | Determination of visible defects Regulated area: Materials, products and waterproofing systems |
ČSN EN 1850-1 | ||
| 1016 | Sheets for waterproofing | Determination of flow resistance Regulated area: Materials, products and waterproofing systems |
ČSN EN 1110 | ||
| 1017 | Sheets for waterproofing | Determination of tensile properties Regulated area: Materials, products and waterproofing systems |
ČSN EN 12311-1 | ||
| 1018 | Sheets for waterproofing | Determination of tensile adhesion strength Regulated area: Materials, products and waterproofing systems |
ČSN EN 13596 | ||
| 1019 | Sheets for waterproofing (for waterproofing of concrete bridge decks) | Determination of water absorption Regulated area: Materials, products and waterproofing systems |
ČSN EN 14223 | ||
| 1020 | Sheets for waterproofing | Determination of flexibility at low temperature Regulated area: Materials, products and waterproofing systems |
ČSN EN 1109 | ||
| 1021 | Sheets for waterproofing | Determination of watertightness Regulated area: Materials, products and waterproofing systems |
ČSN EN 1928 | ||
| 1022 | Metallic products | Tensile test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 6892-1 | ||
| 1023 | Mortars | Frost resistance test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 2452 | ||
| 1024 | Hardened mortars | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 9 | ||
| 1025 | Screed materials | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.2 | ||
| 1026 | Hardened mortars | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 8 | ||
| 1027 | Screed materials | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.1 | ||
| 1028 | Hardened mortars | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-12 | ||
| 1029 | Cement mortars and adhesives | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.3; ČSN EN 1348:2008 | ||
| 1030 | Hardened mortars | Determination of capillary water absorption coefficient Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-18 | ||
| 1031 | Products and systems for the protection and repair of concrete structures | Determination of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12190 | ||
| 1032 | Drainage channels for vehicular and pedestrian areas | Load test Regulated area: Draining elements |
ČSN EN 1433, čl. 9.1 | ||
| 1033 | Gully tops and manhole tops | Determination of dimensions, shapes Regulated area: Draining elements |
ČSN EN 124-1, čl. 8.4 | ||
| 1034 | Gully tops and manhole tops | Determination of load- bearing capacity Regulated area: Draining elements |
ČSN EN 124-1, příl. B | ||
| 1035 | Gully tops and manhole tops | Determination of permanent set Regulated area: Draining elements |
ČSN EN 124-1, příl. A | ||
| 1036 | Surface finish | Determination of adhesion Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2577 | ||
| 1037 | Surface finish | Determination of freeze resistance Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2579 | ||
| 1038 | Surface finish | Determination of water vapour transmission properties Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2580 | ||
| 1039 | Grouts for tiles | Determination of flexural and compressive strength Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 1040 | Thermal insulation materials and products | Determination of length and width Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 822:2013; ČSN EN ISO 29465 | ||
| 1041 | Thermal insulation materials and products | Determination of thickness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 823:2013; ČSN EN ISO 29466 | ||
| 1042 | Thermal insulation materials and products | Determination of squareness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 824 | ||
| 1043 | Thermal insulation materials and products | Determination of flatness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 825:2013; ČSN EN ISO 29468 | ||
| 1044 | Thermal insulation materials and products | Pressure test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 826:2013; ČSN EN ISO 29469 | ||
| 1045 | Thermal insulation materials and products | Determination of tensile strength perpendicular to faces Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1607 | ||
| 1046 | Thermal insulation materials and products | Determination of dimensional stability under specified temperature and humidity conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1604 | ||
| 1047 | Thermal insulation materials and products | Determination of dimensional stability at constant laboratory conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1603 | ||
| 1048 | Thermal insulation materials and products | Determination of water absorption by partial immersion Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 29767; ČSN EN 1609:2013 | ||
| 1049 | Thermal insulation materials and products | Determination of long term water absorption by immersion Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 16535, metoda 1A, 2A; ČSN EN 12087:2013 | ||
| 1050 | Thermal insulation materials and products | Determination of water vapour transmission rate Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12086 | ||
| 1051 | Thermal insulation materials and products | Bend test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12089, metoda B | ||
| 1052 | Thermal insulation materials and products | Determination of mass per unit volume Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1602:2013; ČSN EN ISO 29470 | ||
| 1053 | Thermal insulation materials and products | Determination of moisture content by drying at elevated temperature Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 12570 | ||
| 1054 | Building materials and products | Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12667 | ||
| 1055 | Thermal insulation materials and products | Determination of behaviour under point load Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12430 | ||
| 1056 | Thermal insulation materials – double skin faced panels | Determination of tensile strength perpendicular to the plane of the panel Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. A1 | ||
| 1057 | Thermal-insulation materials – Self-supporting sandwich panels | Determination of compressive strength Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. A2 | ||
| 1058 | Thermal-insulation materials – Self-supporting sandwich panels | Determination of shear strength Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. A3, A4 | ||
| 1059 | Thermal-insulation materials – Self-supporting sandwich panels | Determination of flexural strength Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. A5, A7 | ||
| 1060 | Thermal-insulation materials – Self-supporting sandwich panels | Determination of durability Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 14509 ed. 2, příl. B | ||
| 1061 | Mesh – ETICS | Determination of tensile strength and elongation under normal conditions and after artificial ageing Regulated area: Thermal insulation systems |
ČSN EN 13496; EAD 040016-01-0404, čl. 2.2.7 | ||
| 1062 | Building structures and their parts | Static loading tests Regulated area: Loading tests of bridges, building structure and floors |
ČSN 73 2030, příl. A, B, C | ||
| 1063 | Ancillary components for masonry, lintels | Determination of flexural resistance and shear resistance Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-9 ed. 2 | ||
| 1064 | Masonry units | Determination of dimensions Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-16 | ||
| 1065 | Masonry materials, burnt roofing | Determination of flexural strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2605, čl. 24 až 28 | ||
| 1066 | Brick products | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2601, příl. A | ||
| 1067 | Concrete roofing tiles | Testing of dimensional tolerances and mass Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.2 až 5.5 | ||
| 1068 | Masonry units | Determination of cold water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-21 | ||
| 1069 | Masonry units | Determination of mass per unit volume Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-13 | ||
| 1070 | Masonry units | Determination of compressive strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-1+A1 | ||
| 1071 | Concrete roofing tiles | Determination of water permeability Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.7 | ||
| 1072 | Concrete roofing tiles | Determination of mechanical resistance (transverse load bearing capacity) Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.6 | ||
| 1073 | Concrete roofing tiles | Frost resistance test Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.8 | ||
| 1074 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 1075 | Hardened concrete | Hardened concrete sampling Regulated area: Sampling |
ČSN EN 12504-1, čl. 6 | ||
| Testing Laboratory in Brno (0600) | |||||
| 1076 | Fresh concrete | Slump test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-2 | ||
| 1077 | Fresh concrete | Determination of degree of compactability Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-4 | ||
| 1078 | Fresh concrete | Flow table test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-5 | ||
| 1079 | Fresh concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-6 | ||
| 1080 | Fresh concrete | Determination of air content by pressure method Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-7, čl. 6 | ||
| 1081 | Concrete mixing water | Determination of suitability – initial assessment, humic substances Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 1008, čl. 6.1.1, 6.1.2 | ||
| 1082 | Hardened concrete | Determination of tensile strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1318 | ||
| 1083 | Hardened concrete | Determination of volume changes Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1320 | ||
| 1084 | Hardened concrete | Frost resistance test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1322 | ||
| 1085 | Hardened concrete | Determination of resistance to water and chemical de- icing agents Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1326, metoda A, C | ||
| 1086 | Hardened concrete | Determination of modulus of elasticity Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 6174 | ||
| 1087 | Hardened concrete | Testing of shapes and dimensions Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-1 | ||
| 1088 | Hardened concrete | Determination of compressive strength, including the manufacture and treatment of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-2; ČSN EN 12390-3; ČSN EN 12504-1, mimo čl. 6 | ||
| 1089 | Hardened concrete | Determination of compressive strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-3 | ||
| 1090 | Hardened concrete | Determination of flexural strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-5 | ||
| 1091 | Hardened concrete | Determination of the indirect tensile strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-6 | ||
| 1092 | Hardened concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-7 | ||
| 1093 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-8 | ||
| 1094 | Hardened concrete | Determination of static modulus of elasticity in compression Regulated area: Concrete, admixtures and fibres for concrete |
ČSN ISO 1920-10 | ||
| 1095 | Hardened concrete – samples of the structure | Determination of compressive strength Regulated area: Concrete, admixtures and fibres for concrete |
IP 0600T013 (ČSN EN 12390-3) | ||
| 1096 | Hardened concrete | Determination of compressive strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-1, mimo čl. 6 | ||
| 1097 | Hardened concrete | Determination of rebound tester Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12504-2 | ||
| 1098 | Hardened concrete | Determination of hardness by Schmidt rebound tester Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1370 | ||
| 1099 | Hardened concrete | Determination of compressive strength by hardness testing methods (Schmidt N. L.) Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1373; ČSN 73 2011 | ||
| 1100 | Concrete and mortar additives | Determination of solids content by gravimetry Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-8 | ||
| 1101 | Concrete and mortar additives | Determination of water- soluble chloride content by potentiometric titration Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-10 | ||
| 1102 | Concrete and mortar additives | Determination of seam strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 934-5, příl. C | ||
| 1103 | Bridges – surface layers | Determination of adhesion, tensile strength and impermeability Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 6242, příl. B | ||
| 1104 | Bridges – surface layers | Determination of impermeability by measuring electrical resistance Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 6242, příl. D | ||
| 1105 | Concrete products | Determination of dimensions Regulated area: Small concrete products |
ČSN EN 1338, příl. C; ČSN EN 1339, příl. C; ČSN EN 1340, příl. C; ČSN EN 13748-1, čl. 5.2, 5.3, 5.4; ČSN EN 13748-2, čl. 5.2, 5.3, 5.4 | ||
| 1106 | Concrete products | Determination of total water absorption Regulated area: Small concrete products |
ČSN EN 1338, příl. E; ČSN EN 1339, příl. E; ČSN EN 1340, příl. E | ||
| 1107 | Concrete products | Determination of the indirect tensile strength Regulated area: Small concrete products |
ČSN EN 1338, příl. F | ||
| 1108 | Concrete products | Determination of bending strength and fracture load Regulated area: Small concrete products |
ČSN EN 1339, příl. F | ||
| 1109 | Concrete products | Determination of bending strength Regulated area: Small concrete products |
ČSN EN 1340, příl. F | ||
| 1110 | Concrete products | Determination of abrasiveness – Böhme Regulated area: Small concrete products |
ČSN EN 1338, příl. H; ČSN EN 1339, příl. H; ČSN EN 1340, příl. H; ČSN EN 13748-1, čl. 5.6.2; ČSN EN 13748-2, čl. 5.6.2 | ||
| 1111 | Concrete products | Determination of resistance to freezing/thawing Regulated area: Small concrete products |
ČSN EN 1338, příl. D | ||
| 1112 | Concrete products | Determination of resistance to freezing/thawing Regulated area: Small concrete products |
ČSN EN 1339, příl. D | ||
| 1113 | Concrete products | Determination of resistance to freezing/thawing Regulated area: Small concrete products |
ČSN EN 1340, příl. D | ||
| 1114 | Concrete products | Determination of cracks, peeling, structure, colours visually Regulated area: Small concrete products |
ČSN EN 1339, příl. J | ||
| 1115 | Concrete products | Determination of cracks, peeling, structure, colours visually Regulated area: Small concrete products |
ČSN EN 1338, příl. J | ||
| 1116 | Concrete products | Determination of cracks, peeling, structure, colours visually Regulated area: Small concrete products |
ČSN EN 1340, příl. J | ||
| 1117 | Concrete products | Determination of bending strength and fracture load Regulated area: Small concrete products |
ČSN EN 13748-1, čl. 5.5 | ||
| 1118 | Concrete products | Determination of water absorption Regulated area: Small concrete products |
ČSN EN 13748-1, čl. 5.8 | ||
| 1119 | Concrete products | Determination of bending strength and fracture load Regulated area: Small concrete products |
ČSN EN 13748-2, čl. 5.5 | ||
| 1120 | Concrete products | Determination of resistance to frost (chemical de-icing agents – C.D.A.) Regulated area: Small concrete products |
ČSN EN 13748-2, čl. 5.9 | ||
| 1121 | Concrete products | Determination of slipperiness Regulated area: Small concrete products |
ČSN EN 1338, příl. I; ČSN EN 1339, příl. I; ČSN EN 1340, příl. I; ČSN EN 13748-1; ČSN EN 13748-2 | ||
| 1122 | Building components | Determination of shapes, dimensions and appearance Regulated area: Concrete building components and structures |
ČSN 73 0212-5 | ||
| 1123 | Concrete components | Determination of dimensions, shapes, top layer of reinforcement, crack width Regulated area: Concrete building components and structures |
ČSN EN 13369, příl. H; ČSN EN 13369:2013, příl. J | ||
| 1124 | Fence elements | Determination of dimensions, shapes, top layer of reinforcement, crack width Regulated area: Concrete building components and structures |
ČSN EN 12839 ed. 2 | ||
| 1125 | Concrete girders for ceiling structures | Determination of dimensions, shapes, top layer of reinforcement, crack width Regulated area: Concrete building components and structures |
ČSN EN 15037-1 | ||
| 1126 | Concrete girders for ceiling structures | Static loading test Regulated area: Concrete building components and structures |
ČSN EN 15037-1 | ||
| 1127 | Hollow core slabs | Determination of shear load capacity Regulated area: Concrete building components and structures |
ČSN EN 1168+A3, příl. J | ||
| 1128 | Concrete sleepers | Static loading test Regulated area: Concrete building components and structures |
ČSN EN 13230-2 | ||
| 1129 | Building components | Determination of mass Regulated area: Concrete building components and structures |
ČSN 73 2045 | ||
| 1130 | Concrete sleepers | Static loading test Regulated area: Concrete building components and structures |
ČSN EN 13230-4+A1 | ||
| 1131 | Concrete components | Determination of water absorption Regulated area: Concrete building components and structures |
ČSN EN 13369, příl. F | ||
| 1132 | Fibre-cement flat sheets | Determination of mass per unit volume Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.1 | ||
| 1133 | Fibre-cement flat sheets | Determination of flexural strength Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.2 | ||
| 1134 | Fibre-cement flat sheets | Determination of water leaktightness Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.3 | ||
| 1135 | Fibre-cement flat sheets | Determination of water vapour permeability Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.4 | ||
| 1136 | Fibre-cement flat sheets | Determination of bend change – hot water test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.5 | ||
| 1137 | Fibre-cement flat sheets | Determination of bend change – absorption-drying test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.6 | ||
| 1138 | Fibre-cement flat sheets | Test of changes of dimensions due to humidity Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.7 | ||
| 1139 | Fibre-cement flat sheets | Test of behaviour under climate conditions – freeze- thaw tests Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.4.1 | ||
| 1140 | Fibre-cement flat sheets | Test of behaviour under climate conditions – heat- rain tests Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.4.2 | ||
| 1141 | Glass-fibre reinforced concrete | Test of flexural strength Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1170, čl. 5 | ||
| 1142 | Glass-fibre reinforced concrete | Determination of mass per unit volume Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1170, čl. 6 | ||
| 1143 | Glass-fibre reinforced concrete | Cyclic weathering test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1170, příl. C | ||
| 1144 | Geotextiles and geogrids | Wide-width tensile test Regulated area: Glass grids, geotextiles and geotextile-related products |
ČSN EN ISO 10319 | ||
| 1145 | Glass grids, geotextiles and geotextile-related products | Determination of tensile strength and elongation Regulated area: Glass grids, geotextiles and geotextile-related products |
ČSN EN 13496 EAD 040016-01-0404, čl. 2.2.7 | ||
| 1146 | Glass fibre mesh | Determination of the ratio of organic material Regulated area: Glass grids, geotextiles and geotextile-related products |
EAD 040016-01-0404, čl. 2.2.2 | ||
| 1147 | Glass fibre mesh | Detection of mesh size Regulated area: Glass grids, geotextiles and geotextile-related products |
EAD 040016-01-0404, čl. 2.2.5 | ||
| 1148 | Glass fibre mesh | Determination of mass per unit area Regulated area: Glass grids, geotextiles and geotextile-related products |
EAD 040016-01-0404, čl. 2.2.8 | ||
| 1149 | Sheets for waterproofing | Determination of tensile properties Regulated area: Materials, products and waterproofing systems |
ČSN EN 12311-2 | ||
| 1150 | Liquid-applied water impermeable products used under ceramic tiling | Determination of watertightness Regulated area: Materials, products and waterproofing systems |
ČSN EN 14891 ed. 2 | ||
| 1151 | Silicate materials | Determination of the loss of mass by drying by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0102 | ||
| 1152 | Silicate materials | Determination of loss on ignition by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0103 | ||
| 1153 | Silicate materials | Determination of silicon dioxide by defumigation with hydrofluoric acid by gravimetric method Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0105-2 | ||
| 1154 | Silicate materials | Determination of sulphate sulphur by gravimetry Regulated area: Chemical analyses of silicate and building products |
ČSN 72 0117 | ||
| 1155 | Aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-1 | ||
| 1156 | Aggregates | Determination of particle size distribution – sieving analysis Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-1 | ||
| 1157 | Aggregates | Determination of particle shape - Shape index Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-4 | ||
| 1158 | Aggregates | Determination of fine particle quality – sand equivalent test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-8+A1 | ||
| 1159 | Aggregates | Determination of fine particle quality – methylene blue test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-9 | ||
| 1160 | Aggregates | Test of grading of filler aggregates – air-jet sieving Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-10 | ||
| 1161 | Coarse recycled aggregates | Classification of constituents Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-11 | ||
| 1162 | Aggregates | Determination of resistance to fragmentation Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-2 | ||
| 1163 | Aggregates | Determination of loose bulk density and voids Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-3 | ||
| 1164 | Aggregates | Determination of the water content by drying in a ventilated oven Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-5 | ||
| 1165 | Aggregates | Determination of particle density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-6 | ||
| 1166 | Aggregates | Determination of particle density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-7 | ||
| 1167 | Aggregates | Determination of resistance by magnesium sulphate Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-2 | ||
| 1168 | Aggregates | Determination of potential content of humus particles by colorimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 8 | ||
| 1169 | Aggregates | Determination of water soluble chloride salts by Mohr method Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 9 | ||
| 1170 | Aggregates | Determination of water- soluble sulphate by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 10.1 | ||
| 1171 | Aggregates | Determination of total sulphur content by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 11.1 | ||
| 1172 | Aggregates | Determination of acid- soluble sulphate by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 12 | ||
| 1173 | Aggregates | Determination of potential content of humus particles by colorimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 15.1 | ||
| 1174 | Aggregates | Determination of alkali reaction, determination of shrinkage Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1179 | ||
| 1175 | Aggregates | Determination of alkali reaction, determination of shrinkage Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ASTM C 1260-14:2014 | ||
| 1176 | Stone | Determination of abrasion resistance by Böhme method Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14157, kap. 4 | ||
| 1177 | Stone | Determination of flexural strength Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 12326-2, kap. 10 | ||
| 1178 | Stone | Determination of water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 12326-2, kap. 11 | ||
| 1179 | Stone | Determination of resistance to sulphur dioxide Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 12326-2, kap. 14 | ||
| 1180 | Stone | Determination of temperature change resistance Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 12326-2, kap. 15 | ||
| 1181 | Stone | Determination of flexural strength under concentrated load Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 12372 | ||
| 1182 | Stone | Determination of water absorption coefficient by capillarity Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1925 | ||
| 1183 | Stone | Determination of compressive strength Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1926 | ||
| 1184 | Stone | Determination of real density and apparent density and of total and open porosity Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1936 | ||
| 1185 | Stone | Determination of water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13755 | ||
| 1186 | Stone | Determination of freeze resistance Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 12326-2, kap. 12; ČSN EN 12371, zkouška A | ||
| 1187 | Aggregates | Determination of polished stone Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-8 | ||
| 1188 | Metallic products | Tensile test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 6892-1; ČSN EN ISO 15630-2, čl. 5 | ||
| 1189 | Metallic products | Test of steel weldability – shear strength Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 15630-2, čl. 7 | ||
| 1190 | Metallic products | Determination of surface protection thickness Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 2178 | ||
| 1191 | Metallic products | Determination of coating mass by gravimetry Regulated area: Metallic materials and parts in construction |
ČSN EN 10244-1, čl. 5.2.1; ČSN EN 10244-2, čl. 5.2.2 | ||
| 1192 | Metallic products | Salt spray test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 9227, čl. 5.2.2 | ||
| 1193 | Metallic mesh | Determination of longitudinal tensile strength Regulated area: Metallic materials and parts in construction |
ČSN EN 10223-3, čl. 9.3 | ||
| 1194 | Mortars | Frost resistance test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 2452 | ||
| 1195 | Fresh mortar | Determination of consistence by flow table Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-3 | ||
| 1196 | Fresh mortar | Determination of consistence by plunger penetration Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-4 | ||
| 1197 | Fresh mortar | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-6 | ||
| 1198 | Fresh mortar | Test of air content Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-7 | ||
| 1199 | Hardened mortars | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 9 | ||
| 1200 | Screed materials | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.2 | ||
| 1201 | Hardened mortars | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 8 | ||
| 1202 | Screed materials | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.1 | ||
| 1203 | Hardened mortars | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-12 | ||
| 1204 | Cement mortars and adhesives | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.3 | ||
| 1205 | Rendering and plastering mortars | Determination of water vapour permeability Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-19 | ||
| 1206 | Mortars and one-coat rendering mortars | Determination of adhesion to substrate Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-21 | ||
| 1207 | Mortars and adhesives | Determination of open time Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.1 | ||
| 1208 | Screed materials | Determination of abrasion resistance (Böhme) Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-3 | ||
| 1209 | Injection mortars | Determination of bleeding, volume changes, fluidity and compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 445, čl. 4.3.1, 4.3.2 | ||
| 1210 | Mortars | Determination of volume stability Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 2453:1968 | ||
| 1211 | Mortars | Determination of water vapour transmission rate Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 2454:1968 | ||
| 1212 | Products and systems for the protection and repair of concrete structures | Determination of shrinkage and expansion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12617-4, čl. 6, 7 | ||
| 1213 | Products and systems for the protection and repair of concrete structures | Determination of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12190 | ||
| 1214 | Products and systems for the protection and repair of concrete structures | Determination of resistance to capillary absorption Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13057 | ||
| 1215 | Products and systems for the protection and repair of concrete structures | Measurement of bond strength by pull-off Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1542 | ||
| 1216 | Products and systems for the protection and repair of concrete structures | Determination of modulus of elasticity in compression Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13412 | ||
| 1217 | Products and systems for the protection and repair of concrete structures | Determination of thermal compatibility – Thermal cycling without de-icing salt impact Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13687-3 | ||
| 1218 | Tanks | Determination of watertightness Regulated area: Tanks, reservoirs, septic tanks, water treatment plants |
ČSN 75 0905 | ||
| 1219 | Gullies for buildings | Load test Regulated area: Draining elements |
ČSN EN 1253-2, čl. 5.3 | ||
| 1220 | Gully tops and manhole tops | Determination of dimensions and shape Regulated area: Draining elements |
ČSN EN 124-1, čl. 8.4 | ||
| 1221 | Drainage channels for vehicular and pedestrian areas | Load test Regulated area: Draining elements |
ČSN EN 1433 čl. 9.1 | ||
| 1222 | Drainage channels for vehicular and pedestrian areas | Determination of dimensions and shape Regulated area: Draining elements |
ČSN EN 1433, čl. 9.3 | ||
| 1223 | Drainage channels for vehicular and pedestrian areas | Determination of resistance to frost and chemical de- icing agents Regulated area: Draining elements |
ČSN EN 1433, příl. C | ||
| 1224 | Gully tops and manhole tops | Determination of permanent set Regulated area: Draining elements |
ČSN EN 124-1, příl. A | ||
| 1225 | Gully tops and manhole tops | Determination of load- bearing capacity Regulated area: Draining elements |
ČSN EN 124-1, příl. B | ||
| 1226 | Gully tops and manhole tops | Determination of slipperiness Regulated area: Draining elements |
ČSN EN 124-1, příl. C | ||
| 1227 | Gully tops and manhole tops | Determination of tilt height Regulated area: Draining elements |
ČSN EN 124-1, příl. D | ||
| 1228 | Gully tops and manhole tops | Determination of removal vertical force and vertical displacement Regulated area: Draining elements |
ČSN EN 124-1, příl. E | ||
| 1229 | Gully tops and manhole tops | Determination of load bearing capacity after fatigue test load Regulated area: Draining elements |
ČSN EN 124-5, čl. 6.3 | ||
| 1230 | Gully tops and manhole tops | Determination of load bearing capacity after water absorption Regulated area: Draining elements |
ČSN EN 124-5, čl. 4.3.3 | ||
| 1231 | Gully tops and manhole tops | Determination of load bearing capacity after immersion in vehicle fuel Regulated area: Draining elements |
ČSN EN 124-5, čl. 4.3.4 | ||
| 1232 | Gully tops and manhole tops | Determination of deflection under load Regulated area: Draining elements |
ČSN EN 124-3, příl. A; ČSN EN 124-5, příl. A; ČSN EN 124-6, příl. B | ||
| 1233 | Plastics, composites | Determination of tensile properties Regulated area: Plastics and composites |
ČSN EN ISO 527-1; ČSN EN ISO 527-3 | ||
| 1234 | Fibre-reinforced polymer bars | Determination of the tensile strength, modulus of elasticity, elongation Regulated area: Plastics and composites |
ISO 10406-1, kap. 6; EAD 260023-00-0301, čl. 2.2.2 | ||
| 1235 | Fibre-reinforced polymer bars | Determination of the nominal cross-sectional area of a sample Regulated area: Plastics and composites |
ISO 10406-1, kap. 5; EAD 260023-00-0301, čl. 2.2.1 | ||
| 1236 | Fibre-reinforced polymer bars | Determination of the bond strength with concrete Regulated area: Plastics and composites |
ISO 10406-1, kap. 7; EAD 260023-00-0301, čl. 2.2.4 | ||
| 1237 | Fibre-reinforced polymer bars | Determination of tensile fatigue Regulated area: Plastics and composites |
ISO 10406-1, kap. 10; EAD 260023-00-0301, čl. 2.2.7 | ||
| 1238 | Fibre-reinforced polymer bars | Determination of shear strength Regulated area: Plastics and composites |
ISO 10406-1, kap. 13; EAD 260023-00-0301, čl. 2.2.5 | ||
| 1239 | Fibre-reinforced polymer bars | Determination of alkali resistance Regulated area: Plastics and composites |
ISO 10406-1, kap. 11; EAD 260023-00-0301, čl. 2.2.16 | ||
| 1240 | Fibre-reinforced polymer bars | Determination of interlaminar shear strength Regulated area: Plastics and composites |
EAD 260023-00-0301, čl. 2.2.6, příl. B | ||
| 1241 | Fibre-reinforced polymer bars | Determination of compressive strength Regulated area: Plastics and composites |
EAD 260023-00-0301, čl. 2.2.3 | ||
| 1242 | Fibre-reinforced polymer bars | Determination of the content of glass fibres Regulated area: Plastics and composites |
ČSN EN ISO 1172 | ||
| 1243 | Fibre-reinforced polymer bars | Determination of tensile properties Regulated area: Plastics and composites |
ČSN EN ISO 527-4 | ||
| 1244 | Cement | Determination of normal consistency and setting time Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 1 až 6 | ||
| 1245 | Cement | Determination of volume stability Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 7 | ||
| 1246 | Cement | Determination of strength Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-1 | ||
| 1247 | Cement | Determination of density by pycnometry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 2113, čl. 10 až 16 | ||
| 1248 | Cement | Determination of fineness by sieving method Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-6, čl. 3.1 až 3.5 | ||
| 1249 | Cement | Determination of fineness by permeable method Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-6, čl. 4.1 až 4.10 | ||
| 1250 | Cement | Determination of the loss on ignition by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.4.1 | ||
| 1251 | Cement | Determination of the residue insoluble in hydrochloric acid and sodium carbonate, potassium hydroxide by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.4.3, 4.4.4 | ||
| 1252 | Cement | Determination of silicon dioxide by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.5, 4.5.3 | ||
| 1253 | Cement | Determination of calcium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.14 | ||
| 1254 | Cement | Determination of magnesium oxide by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.15 | ||
| 1255 | Cement | Determination of chlorides by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.5.16 | ||
| 1256 | Cement | Determination of sulphur content in the form of SO3 by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-2, čl. 4.4.2 | ||
| 1257 | Ash, cinder, slag and other silicate materials | Determination of silicon dioxide by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0105-1 | ||
| 1258 | Ash, cinder, slag and other silicate materials | Determination of silicon dioxide by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0106 | ||
| 1259 | Ash, cinder, slag and other silicate materials | Determination of acid- indecomposable share by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0107 | ||
| 1260 | Ash, cinder, slag and other silicate materials | Determination of R2O3 by gravimetric method Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 0108:1974 | ||
| 1261 | Lime | Determination of grain size Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.1, 7.2 | ||
| 1262 | Lime | Determination of reactivity Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.6 | ||
| 1263 | Lime | Determination of volume stability Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.4 | ||
| 1264 | Lime | Determination of consistency, penetration, water retention and air content by standard mortar test Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.8 až 7.10 | ||
| 1265 | Lime | Determination of the loss on ignition by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 6,8 | ||
| 1266 | Lime | Determination of SiO2, CaO, MgO by titration Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 6.3 | ||
| 1267 | Lime | Determination of sulphur content in the form of SO3 by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 6.4 | ||
| 1268 | Lime | Determination of efficiency Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.7 | ||
| 1269 | Lime | Determination of free water and loss by drying by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 6.5 | ||
| 1270 | Lime | Determination of bulk density Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 459-2, čl. 7.3 | ||
| 1271 | Limestone, dolomite | Determination of fineness of grinding Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 1213 | ||
| 1272 | Gypsum binders and gypsum plasters for interior plastering | Determination of flexural strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.5.4 | ||
| 1273 | Gypsum binders and gypsum plasters for interior plastering | Determination of compressive strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.5.5 | ||
| 1274 | Gypsum binders and gypsum plasters for interior plastering | Determination of consistence and workable life Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.3.3 | ||
| 1275 | Screeds based on calcium sulfate | Determination of workable life Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13454-2, čl. 5.6 | ||
| 1276 | Screeds based on calcium sulfate | Determination of compressive strength and flexural strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13454-2, čl. 5.4 | ||
| 1277 | Floor coverings, pedestrian surfaces | Determination of slipperiness Regulated area: Construction and sanitary ceramics |
ČSN P CEN/TS 16165, příl. C; ČSN EN 13036-4; ČSN EN 14231 | ||
| 1278 | Surface finish | Determination of adhesion Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2577 | ||
| 1279 | Surface finish | Determination of watertightness Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2578 | ||
| 1280 | Surface finish | Determination of freeze resistance Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2579 | ||
| 1281 | Surface finish | Determination of resistance to rapid temperature changes Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN 73 2581 | ||
| 1282 | Surface finish | Determination of water vapour transmission rate Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 7783 | ||
| 1283 | Surface finish | Determination of water permeability Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 1062-3 | ||
| 1284 | Surface finish | Determination of thickness Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 2808, čl. 5.5.6, 5.5.7 | ||
| 1285 | Grouts for tiles | Determination of flexural and compressive strength Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 1286 | Grouts for tiles | Determination of shrinkage Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 1287 | Grouts for tiles | Determination of water absorption Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN 13888-2 | ||
| 1288 | Surface finish | Determination of thickness Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 2360 | ||
| 1289 | Thermal insulation materials and products | Determination of tensile strength perpendicular to faces Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1607 | ||
| 1290 | Thermal insulation materials and products | Determination of water vapour transmission rate Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12086 | ||
| 1291 | Thermal insulation materials and products | Reaction to fire tests – determination of the gross heat of combustion (calorific value) Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 1716 | ||
| 1292 | Building materials and products | Reaction to fire tests – Single-flame source test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 11925-2 | ||
| 1293 | Thermal insulation materials and products | Determination of mass per unit volume Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1602:2013; ČSN EN ISO 29470 | ||
| 1294 | Thermal insulation materials and products | Determination of length and width Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 822:2013; ČSN EN ISO 29465 | ||
| 1295 | Thermal insulation materials and products | Determination of thickness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 823:2013; ČSN EN ISO 29466 | ||
| 1296 | Thermal insulation materials and products | Determination of linear dimensions of test specimens Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12085:2013; ČSN EN ISO 29768 | ||
| 1297 | Construction foams | Determination of mass per unit volume Regulated area: Thermal insulation materials and products, thermal tests |
EAD 040083-00-0404, příloha F, čl. 3.1; ČSN EN 17333-1, čl. 4.3 | ||
| 1298 | Construction foams | Detection of open time Regulated area: Thermal insulation materials and products, thermal tests |
EAD 040083-00-0404, příloha F, čl. 3.2; ČSN EN 17333-1, čl. 4.2 | ||
| 1299 | Construction foams | Determination of hardening time Regulated area: Thermal insulation materials and products, thermal tests |
EAD 040083-00-0404, příl. F, čl. 3.3; ČSN EN 17333-1, čl. 4.1 | ||
| 1300 | Construction foams | Determination of foam adhesion to substrate and insulator Regulated area: Thermal insulation materials and products, thermal tests |
EAD 040083-00-0404, příl. F, čl. 4.1, 4.2.1, 4.2.2, 4.2.3.1, 4.2.3.2 | ||
| 1301 | Adhesive and screed materials for ETICS | Determination of adhesion to the substrate Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. 2.2.8; EAD 040083-00-0404, čl. 2.2.11, 2.2.20 | ||
| 1302 | Mortars | Determination of freeze resistance Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. 2.2.5.2; EAD 040083-00-0404, čl. 2.2.7 | ||
| 1303 | ETICS | Determination of water absorption Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. 2.2.3; EAD 040083-00-0404, čl. 2.2.5.1 | ||
| 1304 | ETICS | Determination of the pull- through resistance of anchors through insulation Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. 2.2.12; EAD 040083-00-0404, čl. 2.2.13.1; ČSN EN 16382 | ||
| 1305 | Adhesive and screed materials, plasters and liquids – ETICS | Determination of mass per unit volume Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.1.1; EAD 040083-00-0404, čl. A.6.1 | ||
| 1306 | Plasters and liquids – ETICS | Determination of dry matter by gravimetry Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.3; EAD 040083-00-0404, čl. A.6.5 | ||
| 1307 | Pastes and liquids – ETICS | Determination of ash content by gravimetry Regulated area: Thermal insulation systems |
EAD 040287-00-0404, čl. L.4.1; EAD 040083-00-0404, čl. A.6.6 | ||
| 1308 | ETICS | Determination of resistance to impact Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. 2.2.8; ČSN EN 13497+A1 | ||
| 1309 | Surface treatment - outer layers | Determination of water vapour diffusion Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. 2.2.9.1 | ||
| 1310 | Mesh – ETICS | Determination of tensile strength under normal conditions and after artificial ageing Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. 2.2.21.1, 2.2.21.2 | ||
| 1311 | Mesh – ETICS | Determination of ash content by gravimetry Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. A.8.1 | ||
| 1312 | Reinforcement mesh – ETICS | Determination of mass per unit area Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. A.8.2 | ||
| 1313 | Mesh – ETICS | Determination of mesh size and number of fibres Regulated area: Thermal insulation systems |
EAD 040083-00-0404, čl. A.8.3 | ||
| 1314 | Ventilated façades | Determination of resistance to horizontal point loads Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. F | ||
| 1315 | Ventilated façades | Determination of hard and soft body impact resistance Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. G | ||
| 1316 | Ventilated façades | Determination of break resistance of a grooved cladding element Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. H.1 | ||
| 1317 | Ventilated façades | Creep test (determination of behaviour under long term load) Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. H.2 | ||
| 1318 | Ventilated façades | Determination of pull- through resistance of a fixing through a cladding element Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.1 | ||
| 1319 | Ventilated façades | Determination of pull- through resistance of a fixing under shear load Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.2 | ||
| 1320 | Ventilated façades | Determination of pull-out resistance of a fixing through a cladding element under combined tensile and shear loads Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.3 | ||
| 1321 | Ventilated façades | Determination of suspended kit break resistance Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. I.4 | ||
| 1322 | Ventilated façades | Determination of resistance to vertical load Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. J.1 | ||
| 1323 | Ventilated façades | Determination of pull- through resistance of a fixing through a profile Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. J.2 | ||
| 1324 | Ventilated façades | Determination of metal clip break resistance Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. J.3 | ||
| 1325 | Ventilated façades | Determination of resistance to freeze-thaw cycles Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. K.1; EAD 090062-01-0404, příl. M.3; EAD 090019-01-0404, čl. 2.2.7.2 | ||
| 1326 | Ventilated façades | Determination of shear load resistance of a fixing in lower supporting structure Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. K.2 | ||
| 1327 | Ventilated façades | Determination of bracket resistance to vertical load (dead weight) and horizontal load (wind suction) Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. L | ||
| 1328 | Ventilated façades, ETICS | Determination of hygrothermal behaviour Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. M.1; EAD 040083-00-0404, čl. 2.2.6 | ||
| 1329 | Ventilated façades | Determination of resistance to pulsating load cycles Regulated area: Thermal insulation systems |
EAD 090062-01-0404, příl. M.2 | ||
| 1330 | Ventilated façades | Determination of adhesion of core at high temperature Regulated area: Thermal insulation systems |
EAD 090019-01-0404, čl. 2.2.2 | ||
| 1331 | Ventilated façades | Determination of water absorption Regulated area: Thermal insulation systems |
EAD 090019-01-0404, čl. 2.2.3 | ||
| 1332 | Ventilated façades | Determination of impact resistance Regulated area: Thermal insulation systems |
EAD 090019-01-0404, čl. 2.2.5 | ||
| 1333 | Ventilated façades | Determination of seam strength Regulated area: Thermal insulation systems |
EAD 090019-01-0404, čl. 2.2.6.1, příl. E | ||
| 1334 | Ventilated façades | Determination of hygrothermal behaviour Regulated area: Thermal insulation systems |
EAD 090019-01-0404, čl. 2.2.7.1 | ||
| 1335 | Ventilated façades | Determination of resistance to vertical load Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.4, příl. A | ||
| 1336 | Ventilated façades | Determination of resistance to vertical load of fasteners for cladding Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.5.1 | ||
| 1337 | Ventilated façades | Determination of resistance to horizontal load of fasteners for cladding Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.5.2 | ||
| 1338 | Ventilated façades | Determination of resistance to pulsating load of fasteners for cladding Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.5.3 | ||
| 1339 | Ventilated façades | Determination of brackets resistance to horizontal pulsating load Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.6.3 | ||
| 1340 | Ventilated façades | Determination of brackets resistance to permanent vertical load Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.6.4 | ||
| 1341 | Ventilated façades | Determination of brackets resistance to freeze-thaw cycles Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.6.5 | ||
| 1342 | Ventilated façades | Determination of brackets resistance to immersion in water Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.6.6 | ||
| 1343 | Ventilated façades | Determination of brackets resistance to aging under temperature and high humidity Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.6.7 | ||
| 1344 | Ventilated façades | Determination of brackets resistance to soft body impact Regulated area: Thermal insulation systems |
EAD 090034-01-0404, čl. 2.2.6.8 | ||
| 1345 | Composite façade panels | Determination of tensile properties Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.2 | ||
| 1346 | Composite façade panels | Determination of tensile strength perpendicular to faces Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.3 a příloha A | ||
| 1347 | Composite façade panels | Determination of flexural strength Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.4 | ||
| 1348 | Composite façade panels | Determination of shear properties Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.5, příl. B | ||
| 1349 | Composite façade panels | Determination of thickness Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.6 | ||
| 1350 | Composite façade panels | Determination of torque peel strength Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.8 | ||
| 1351 | Composite façade panels | Determination of hard body impact resistance Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.9, příl. C | ||
| 1352 | Composite façade panels | Determination of hygrothermal behaviour Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.12.1 | ||
| 1353 | Composite façade panels | Determination of resistance to immersion in boiling water Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.12.2 | ||
| 1354 | Composite façade panels | Determination of resistance to immersion in water Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.12.3 | ||
| 1355 | Composite façade panels | Determination of resistance to freeze-thaw cycles Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.12.4 | ||
| 1356 | Composite façade panels | Determination of resistance to long term exposure to heat Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.12.5 | ||
| 1357 | Composite façade panels | Creep test (determination of behaviour under long term load) Regulated area: Thermal insulation systems |
EAD 210046-00-1201, čl. 2.2.12.6, příl. D | ||
| 1358 | Ventilated façades | Determination of impact resistance Regulated area: Thermal insulation systems |
ETAG 017, čl. 5.4.5.1, 5.4.5.2, 5.4.5.3 | ||
| 1359 | ETICS | Determination of thermal- humidity behaviour Regulated area: Thermal insulation systems |
ČSN EN 16383 | ||
| 1360 | ETICS | Determination of the pull- off resistance by foam block test Regulated area: Thermal insulation systems |
ČSN EN 13495 | ||
| 1361 | ETICS | Pressure test Regulated area: Thermal insulation systems |
ČSN EN ISO 29469 | ||
| 1362 | Bridges | Loading tests Regulated area: Loading tests of bridges, building structure and floors |
ČSN 73 6209 | ||
| 1363 | Railings | Determination of impact resistance Regulated area: Loading tests of bridges, building structure and floors |
ČSN 74 3305, příl. B | ||
| 1364 | Building structures and their parts | Static loading tests Regulated area: Loading tests of bridges, building structure and floors |
ČSN 73 2030, příl. A, B, C | ||
| 1365 | Internal partition kits | Determination of resistance to soft body impact load Regulated area: Masonry, hardware, partition walls, ceilings, floors |
EAD 210005-00-0505, čl. 2.2.6.1 | ||
| 1366 | Internal partition kits | Determination of resistance to hard body impact load Regulated area: Masonry, hardware, partition walls, ceilings, floors |
EAD 210005-00-0505, čl. 2.2.6.2 | ||
| 1367 | Masonry | Determination of compressive strength Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 1052-1 | ||
| 1368 | Masonry | Determination of flexural strength Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 1052-2 | ||
| 1369 | Masonry | Determination of initial shear strength Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 1052-3 | ||
| 1370 | Ancillary components for masonry | Determination of tensile and compressive load capacity and load displacement characteristics of wall ties Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-5 | ||
| 1371 | Ancillary components for masonry | Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-6 | ||
| 1372 | Ancillary components for masonry, lintels | Determination of flexural resistance and shear resistance Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-9 ed. 2 | ||
| 1373 | Ancillary components for masonry, lintels | Determination of dimensions and bow Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-11 | ||
| 1374 | Metal profiles of suspended ceilings | Bend test Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 13964 ed. 2, čl. 5.2 | ||
| 1375 | Metal hinges and connecting parts of suspended ceilings | Static test, functionality test Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 13964 ed. 2, čl. 5.3 | ||
| 1376 | Ventilated facades, partition kits, railings | Determination of impact resistance Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ISO 7892 | ||
| 1377 | Ventilated facades, partition kits, railings | Determination of small hard body impact resistance Regulated area: Masonry, hardware, partition walls, ceilings, floors |
EOTA TR 001, čl. 3 | ||
| 1378 | Clay roofing tiles | Determination of water permeability Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 539-1, čl. 6 | ||
| 1379 | Masonry units | Determination of dimensions Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-16 | ||
| 1380 | Masonry materials and clay roofing tiles | Determination of compressive strength and flexural strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2605, čl. 21 až 28 | ||
| 1381 | Masonry materials and clay roofing tiles | Determination of load- bearing capacity Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 538 | ||
| 1382 | Brick products, ceiling materials | Determination of fracture load Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2642, čl. 13 | ||
| 1383 | Brick products | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2601, příl. A | ||
| 1384 | Clay roofing tiles | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 539-2 | ||
| 1385 | Masonry units | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-18 | ||
| 1386 | Concrete roofing tiles | Testing of dimensional tolerances and mass Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.2 až 5.5 | ||
| 1387 | Concrete masonry units | Determination of percentage area of voids (by paper indentation) Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-2 | ||
| 1388 | Calcium silicate masonry units | Determination of net volume and percentage of voids and material by filling the voids with sand Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-9 | ||
| 1389 | Clay roofing tiles | Determination of geometrical characteristics Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 1024 | ||
| 1390 | Calcium silicate and autoclaved aerated concrete units | Determination of moisture content Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-10 | ||
| 1391 | Burnt masonry elements for damp proof course units | Determination of water absorption by boiling in water Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-7 | ||
| 1392 | Concrete masonry units and burnt masonry units | Determination of water absorption due to capillary action and the initial rate of water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-11 | ||
| 1393 | Masonry units | Determination of cold water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-21 | ||
| 1394 | Masonry units | Determination of net volume and percentage of voids by hydrostatic weighing Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-3 | ||
| 1395 | Masonry units | Determination of mass per unit volume Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-13 | ||
| 1396 | Clay pavers | Determination of transversal fracture load Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 1344, příl. D | ||
| 1397 | Clay pavers | Determination of geometrical characteristics Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 1344, příl. B | ||
| 1398 | Masonry units | Determination of moisture movement Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-14 | ||
| 1399 | Brick products | Determination of mass, bulk density and water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2603 | ||
| 1400 | Brick products | Determination of susceptibility to efflorescence Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2608 | ||
| 1401 | Masonry units | Determination of flatness of faces Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-20 | ||
| 1402 | Masonry units, concrete masonry units | Bending strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-6 | ||
| 1403 | Brick products | Determination of appearance and dimensions Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2602 | ||
| 1404 | Beam-and-block floor systems | Measurement of surface dimensions and characteristics Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-2+A1, čl. 5.1; ČSN EN 15037-3+A1, čl. 5.1 | ||
| 1405 | Beam-and-block floor systems | Determination of resistance to concentric load Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-3+A1, čl. 5.2.1 | ||
| 1406 | Beam-and-block floor systems | Determination of bending strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-2+A1, čl. 5.2.2; ČSN EN 15037-3+A1, čl. 5.2.2 | ||
| 1407 | Beam-and-block floor systems | Determination of compressive strength in longitudinal direction Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-2+A1, čl. 5.2.3 | ||
| 1408 | Beam-and-block floor systems | Determination of compressive strength in longitudinal direction Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-3+A1, čl. 5.2.3 | ||
| 1409 | Beam-and-block floor systems | Determination of the indirect strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-2+A1, čl. 5.2.4; ČSN EN 15037-3+A1, čl. 5.2.4 | ||
| 1410 | Brick products | Determination of presence of lime nodules Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2607 | ||
| 1411 | Masonry units | Determination of compressive strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-1+A1 | ||
| 1412 | Concrete roofing tiles | Determination of water permeability Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.7 | ||
| 1413 | Concrete roofing tiles | Determination of mechanical resistance (transverse load bearing capacity) Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.6 | ||
| 1414 | Concrete roofing tiles | Frost resistance test Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 491, čl. 5.8 | ||
| 1415 | Masonry units | Determination of moisture expansion Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-19 | ||
| 1416 | Brick products | Determination of susceptibility to efflorescence Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2642, čl. 10 | ||
| 1417 | Brick products | Determination of the presence of lime nodules Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2642, čl. 9 | ||
| 1418 | Brick products | Determination of moisture expansion Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2642, čl. 8 | ||
| 1419 | Beam-and-block floor systems | Determination of resistance to concentric load Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 15037-2+A1, čl. 5.2.1 | ||
| 1420 | Brick products | Determination of mass Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2642, čl. 6 | ||
| 1421 | Brick products | Determination of water absorption at boiling Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2642, čl. 7 | ||
| 1422 | Masonry units | Determination of water absorption and initial water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 771-1+A1, příl. C | ||
| 1423 | Fresh concrete | Fresh concrete sampling Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 1424 | Hardened concrete | Hardened concrete sampling Regulated area: Sampling |
ČSN EN 12504-1, čl. 6 | ||
| 1425 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1 | ||
| Testing Laboratory in Ostrava (0700) | |||||
| 1426 | Fresh concrete | Slump test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-2 | ||
| 1427 | Fresh concrete | VeBe test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-3 | ||
| 1428 | Fresh concrete | Determination of mass per unit volume Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-6 | ||
| 1429 | Fresh concrete | Determination of air content by pressure method Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12350-7, čl. 6 | ||
| 1430 | Concrete mixing water | Determination of suitability – initial assessment, humic substances Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 1008, čl. 6.1.1, 6.1.2 | ||
| 1431 | Hardened concrete | Frost resistance test Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1322 | ||
| 1432 | Hardened concrete | Determination of the shape and dimensions of specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-1 | ||
| 1433 | Hardened concrete | Determination of compressive strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-3 | ||
| 1434 | Hardened concrete | Determination of flexural strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-5 | ||
| 1435 | Hardened concrete | Determination of the indirect tensile strength of test specimens Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-6 | ||
| 1436 | Hardened concrete | Determination of density of hardened concrete Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-7 | ||
| 1437 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 12390-8 | ||
| 1438 | Hardened concrete | Determination of hardness by Schmidt rebound tester Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1370 | ||
| 1439 | Hardened concrete | Determination of compressive strength by hardness testing methods (Schmidt N. L.) Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 1373; ČSN 73 2011 | ||
| 1440 | Concrete and mortar additives | Determination of capillary absorption Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 480-5 | ||
| 1441 | Fresh and hardened concrete with metal and polymer fibres | Determination of fibre content Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 14721+A1 | ||
| 1442 | Metallic and polymer fibre- reinforced concrete | Determination of general suitability of fibres for use in concrete Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 14845-1 | ||
| 1443 | Metallic and polymer fibre- reinforced concrete | Determination of the effect of fibres on the residual flexural strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 14845-2 | ||
| 1444 | Metallic and polymer fibre- reinforced concrete | Determination of the effect of fibres on concrete Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 1766 ed. 2, čl. 4, 5, 6, 8 | ||
| 1445 | Metallic fibre-reinforced concrete | Determination of flexural tensile strength – limit of proportionality, residual strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 14651+A1 | ||
| 1446 | Autoclaved concrete | Determination of dry bulk density Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 678 | ||
| 1447 | Aerated concrete | Determination of compression strength, flexural strength and concentric compressive strength Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 679 | ||
| 1448 | Autoclaved aerated concrete | Determination of flexural strength during drying Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 1351, čl. 5 až 7 | ||
| 1449 | Autoclaved aerated concrete | Determination of moisture content by gravimetry Regulated area: Concrete, admixtures and fibres for concrete |
ČSN EN 1353, čl. 5 až 7 | ||
| 1450 | Bridges – surface layers | Determination of adhesion, tensile strength and impermeability Regulated area: Concrete, admixtures and fibres for concrete |
ČSN 73 6242, příl. B | ||
| 1451 | Concrete products | Determination of resistance to freezing/thawing Regulated area: Small concrete products |
ČSN EN 1338, příl. D; ČSN EN 1339, příl. D; ČSN EN 1340, příl. D | ||
| 1452 | Concrete products | Determination of abrasiveness – Böhme Regulated area: Small concrete products |
ČSN EN 1340, příl. H; ČSN EN 13748-1, čl. 5.6.2; ČSN EN 13748-2, čl. 5.6.2 | ||
| 1453 | Concrete products | Determination of dimensions Regulated area: Small concrete products |
ČSN EN 13748-1, čl. 5.2, 5.3, 5.4 | ||
| 1454 | Concrete products | Determination of bending strength and fracture load Regulated area: Small concrete products |
ČSN EN 13748-1, čl. 5.5 | ||
| 1455 | Concrete products | Determination of water absorption Regulated area: Small concrete products |
ČSN EN 13748-1, čl. 5.8 | ||
| 1456 | Concrete products | Determination of dimensions Regulated area: Small concrete products |
ČSN EN 13748-2, čl. 5.2, 5.3, 5.4 | ||
| 1457 | Concrete products | Determination of bending strength and fracture load Regulated area: Small concrete products |
ČSN EN 13748-2, čl. 5.5 | ||
| 1458 | Concrete products | Determination of resistance to frost (chemical de-icing agents – C.D.A.) Regulated area: Small concrete products |
ČSN EN 13748-2, čl. 5.9 | ||
| 1459 | Building components | Determination of shapes, dimensions and appearance Regulated area: Concrete building components and structures |
ČSN 73 0212-5 | ||
| 1460 | Concrete components | Determination of dimensions and surface characteristics, weight and top layer of reinforcement Regulated area: Concrete building components and structures |
ČSN EN 13369, příl. H; ČSN EN 13369:2013, čl. 5.2, 5.3, příl. J | ||
| 1461 | Concrete components | Determination of water absorption Regulated area: Concrete building components and structures |
ČSN EN 13369, příl. F; ČSN EN 13369:2013, čl. 5.1.2, příl. G | ||
| 1462 | Fence elements | Determination of dimensions, shapes, top layer of reinforcement, crack width Regulated area: Concrete building components and structures |
ČSN EN 12839 ed. 2 | ||
| 1463 | Concrete girders for ceiling structures | Determination of dimensions, shapes, top layer of reinforcement, crack width Regulated area: Concrete building components and structures |
ČSN EN 15037-1, čl. 5.2 | ||
| 1464 | Concrete girders for ceiling structures | Static loading test Regulated area: Concrete building components and structures |
ČSN EN 15037-1, čl. 5.4 | ||
| 1465 | Lightweight and aerated concrete components | Determination of dimensions Regulated area: Concrete building components and structures |
ČSN EN 991 | ||
| 1466 | Concrete pipes | Tests of strength and load bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 1916, příl. C, D | ||
| 1467 | Concrete manholes | Tests of strength and load bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 1917, příl. A, B, C, D, E | ||
| 1468 | Concrete pipes | Determination of total water absorption Regulated area: Concrete building components and structures |
ČSN EN 1916, příl. F | ||
| 1469 | Concrete manholes | Determination of total water absorption Regulated area: Concrete building components and structures |
ČSN EN 1917, příl. D | ||
| 1470 | Concrete pipes | Determination of watertightness Regulated area: Concrete building components and structures |
ČSN EN 1916, příl. E | ||
| 1471 | Hollow core slabs | Determination of shear load capacity Regulated area: Concrete building components and structures |
ČSN EN 1168+A3, čl. 6.4, 8, příl. J | ||
| 1472 | Hollow core slabs | Determination of dimensional characteristics Regulated area: Concrete building components and structures |
ČSN EN 1168+A3, čl. 5.3 | ||
| 1473 | Fence elements | Determination of load capacity and the total bearing capacity Regulated area: Concrete building components and structures |
ČSN EN 12839 ed. 2, příl. B | ||
| 1474 | Building components | Determination of mass Regulated area: Concrete building components and structures |
ČSN 73 2045 | ||
| 1475 | Concrete pipes | Determination of dimensional characteristics Regulated area: Concrete building components and structures |
ČSN EN 639 | ||
| 1476 | Precast concrete products | Determination of dimensional characteristics Regulated area: Concrete building components and structures |
ČSN EN 13693+A1, čl. 5.2 | ||
| 1477 | Precast concrete elements – Ribbed floor elements | Determination of dimensional characteristics Regulated area: Concrete building components and structures |
ČSN EN 13224, čl. 5.3 | ||
| 1478 | Concrete pipes | Hydrostatic pressure test Regulated area: Concrete building components and structures |
ČSN EN 640, čl. 4.2.1 | ||
| 1479 | Precast concrete products | Determination of resistance to freezing/thawing Regulated area: Concrete building components and structures |
ČSN EN 13198, příl. A, B | ||
| 1480 | Concrete pipes | Tightness test of joints Regulated area: Concrete building components and structures |
ČSN EN 1916, příl. A | ||
| 1481 | Concrete manholes | Determination of watertightness Regulated area: Concrete building components and structures |
ČSN EN 1917, příl. C | ||
| 1482 | Precast concrete products | Detection of reinforcement position Regulated area: Concrete building components and structures |
ČSN EN 13198, čl. 5.6 | ||
| 1483 | Building components | Determination of impact strength Regulated area: Concrete building components and structures |
ČSN 73 2035 | ||
| 1484 | Precast concrete products | Loading tests Regulated area: Concrete building components and structures |
ČSN EN 13693+A1, příl. E | ||
| 1485 | Timber structures | Static loading tests Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN 73 2030, příl. D; ČSN EN 380 | ||
| 1486 | Timber structures, plasterboards | Determination of strength and stiffness Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 594 | ||
| 1487 | Timber structures | Determination of bearing capacity and deformation behaviour Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 595 | ||
| 1488 | Timber structures | Determination of impact resistance Regulated area: Timber, timber components, timber based and fibre-cement products |
EOTA TR 001 | ||
| 1489 | Timber structures | Determination of bending and shear stiffnesses and capacities, determination of compression Regulated area: Timber, timber components, timber based and fibre-cement products |
EAD 130367-00-0304, mimo čl. A2.5 | ||
| 1490 | Structural and glued timber | Determination of local and global bending modulus of elasticity, tensile and bending strength, and calculation of their characteristic values from measured values Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 408+A1, čl. 8, 9, 10, 13, 19; ČSN EN 384+A2 | ||
| 1491 | Timber structures | Soft body impact test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 596 | ||
| 1492 | Wood-based floorings | Determination of strength limit Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 14342, čl. 4.5 | ||
| 1493 | Structural laminated veneer lumber | Determination of the bonding quality Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 14374, příl. B | ||
| 1494 | Wood-based panels | Determination of bending, compressive and tensile properties Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 789, čl. 7, 8, 9, příl. D | ||
| 1495 | Wood-based panels | Determination of characteristic 5-percentile values and characteristic mean values Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1058 | ||
| 1496 | Coniferous sawn timber for structural elements | Visual determination of grading characteristics Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN 73 2824-1, čl. 5 | ||
| 1497 | Glued timber | Determination of dimensional characteristics Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 14080, čl. 5.11 | ||
| 1498 | Glued timber | Determination of shear strength – shear test of glued joints Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 14080, příl. D | ||
| 1499 | Glued timber | Test of lamellas with or without finger joints Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 14080, příl. E, G | ||
| 1500 | Glued timber | Determination of bond strength for large finger joints Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 14080, čl. 4.3 | ||
| 1501 | Fibre-cement slates and fittings | Tests of dimensions Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 492+A2, čl. 7.2 | ||
| 1502 | Fibre-cement slates and fittings | Determination of bulk density, bending, water impermeability, bending changes - hot water test and absorption-drying test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 492+A2, čl. 7.3 | ||
| 1503 | Fibre-cement slates and fittings | Determination of frost resistance, heat-rain test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 492+A2, čl. 7.4 | ||
| 1504 | Fibre-cement profiled sheets and fittings | Determination of dimensions Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 494+A1, čl. 7.2 | ||
| 1505 | Fibre-cement profiled sheets and fittings | Determination of density, bending changes – hot water test and absorption-drying test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 494+A1, čl. 7.3 | ||
| 1506 | Fibre-cement profiled sheets and fittings | Determination of frost resistance, heat-rain test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 494+A1, čl. 7.4 | ||
| 1507 | Fibre-cement flat sheets | Determination of mass per unit volume Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.1 | ||
| 1508 | Fibre-cement flat sheets | Determination of flexural strength and modulus of elasticity Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.2 | ||
| 1509 | Fibre-cement flat sheets | Determination of water leaktightness Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.3 | ||
| 1510 | Fibre-cement flat sheets | Determination of water vapour permeability Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.4 | ||
| 1511 | Fibre-cement flat sheets | Determination of bend change – hot water test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.5 | ||
| 1512 | Fibre-cement flat sheets | Determination of bend change – absorption-drying test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.6 | ||
| 1513 | Fibre-cement flat sheets | Test of changes of dimensions due to humidity Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.3.7 | ||
| 1514 | Fibre-cement flat sheets | Determination of frost resistance, heat-rain test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 12467+A2, čl. 7.4 | ||
| 1515 | Glass-fibre reinforced concrete | Test of flexural strength Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1170, čl. 5 | ||
| 1516 | Glass-fibre reinforced concrete | Determination of mass per unit volume Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1170, čl. 6 | ||
| 1517 | Glass-fibre reinforced concrete | Cyclic weathering test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1170, příl. C | ||
| 1518 | Wood-based panels | Determination of dimensions Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 324-1; ČSN EN 324-2 | ||
| 1519 | Wood-based panels | Determination of dimensions, including the production of specimens Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 325 | ||
| 1520 | Wood-based panels | Determination of mass per unit volume Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 323 | ||
| 1521 | Structural timber | Determination of moisture content by electrical resistance method, and calculation of their characteristic values from measured values Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 13183-2; ČSN EN 384+A2 | ||
| 1522 | Wood-based panels, composites | Determination of modulus of elasticity in bending and bending strength Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 310 | ||
| 1523 | Wood-based panels, composites | Determination of thickness swelling Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 317 | ||
| 1524 | Wood-based panels, composites | Determination of tensile strength perpendicular to the plane of the board Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 319 | ||
| 1525 | Wood-based panels, composites | Determination of resistance to humidity Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 321 | ||
| 1526 | Wood-based panels, composites | Determination of moisture content by gravimetry Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 322 | ||
| 1527 | Wood-based panels | Frost resistance test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1328 | ||
| 1528 | Structural and glued timber | Determination of dimensions and compressive strength parallel to the fibres Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 408+A1, čl. 5, 15 | ||
| 1529 | Fixtures for timber structures | Determination of dimensions Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 14592+A1, čl. 5 | ||
| 1530 | Fixtures for timber structures | Determination of withdrawal capacity Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1382 | ||
| 1531 | Fixtures for timber structures | Head pull through test Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 1383 | ||
| 1532 | Fixtures for timber structures | Determination of yield moment Regulated area: Timber, timber components, timber based and fibre-cement products |
ČSN EN 409 | ||
| 1533 | Hygroscopic, non- hygroscopic building materials, sheathed products | Determination of water vapour transmission properties Regulated area: Materials, products and waterproofing systems |
ČSN EN ISO 12572 | ||
| 1534 | Aggregates | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-1 | ||
| 1535 | Aggregates | Determination of various aggregate particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1180 | ||
| 1536 | Coarse aggregates | Determination of percentage of crushed particles Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-5 | ||
| 1537 | Coarse recycled aggregates | Classification of constituents Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-11 | ||
| 1538 | Aggregates | Determination of particle size distribution – sieving analysis Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-1 | ||
| 1539 | Aggregates | Determination of particle shape - Shape index Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-4 | ||
| 1540 | Aggregates | Determination of fine particle quality – sand equivalent test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 933-8+A1 | ||
| 1541 | Aggregates | Determination of resistance to fragmentation Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-2, čl. 1 až 5; ČSN EN 13450, příl. C | ||
| 1542 | Aggregates | Determination of loose bulk density and voids Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-3, příl. D | ||
| 1543 | Aggregates | Determination of the water content by drying in a ventilated oven Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-5 | ||
| 1544 | Aggregates | Determination of particle density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-6, příl. B | ||
| 1545 | Aggregates | Determination of the particle density of filler by pycnometry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1097-7 | ||
| 1546 | Aggregates | Determination of resistance by magnesium sulphate Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1367-2 | ||
| 1547 | Aggregates | Determination of potential content of humus particles by colorimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 15.1 | ||
| 1548 | Blast-furnace slag | Determination of the silicate decay by colorimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 19.1 | ||
| 1549 | Blast-furnace slag | Determination of the iron decay by colorimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 1744-1+A1, čl. 19.2 | ||
| 1550 | Aggregates | Determination of resistance to freezing by freeze test Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN 72 1176, čl. 17 až 26 | ||
| 1551 | Armourstone | Determination of compressive strength Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13383-1, čl. 5.3; ČSN EN 1926, čl. 1 až 10 | ||
| 1552 | Armourstone | Determination of density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13383-2, čl. 8.1 až 8.7.2; ČSN EN 13383-1, čl. 5.2, 7.3 | ||
| 1553 | Armourstone | Determination of resistance to freezing/thawing Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 13383-2, čl. 9.1 až 9.7.2; ČSN EN 13383-1, čl. 7.4 | ||
| 1554 | Agglomerated stone | Determination of density and water absorption Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-1 | ||
| 1555 | Agglomerated stone | Determination of flexural strength Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-2, čl. 1 až 9 | ||
| 1556 | Agglomerated stone | Determination of freeze resistance Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-5, čl. 1 až 9 | ||
| 1557 | Agglomerated stone | Determination of resistance to ageing by thermal shock Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-6, čl. 1 až 9 | ||
| 1558 | Agglomerated stone | Determination of dimensions and rectangularity Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN 14617-16, čl. 1 až 3 | ||
| 1559 | Soils and backfills | Determination of moisture content by gravimetry Regulated area: Stone, aggregates, inactive concrete admixtures, soils |
ČSN EN ISO 17892-1 | ||
| 1560 | Metallic products | Tensile test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 6892-1; ČSN EN 12797, kap. 5; ČSN EN ISO 15630-1, čl. 5; ČSN EN ISO 15630-2, čl. 5; ČSN EN ISO 15630-3, čl. 5 | ||
| 1561 | Metallic products | Bend test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 15630-1, kap. 6; ČSN EN ISO 15630-2, kap. 6; ČSN EN ISO 15630-3, kap. 6; ČSN EN ISO 7438 | ||
| 1562 | Metallic products | Test of steel weldability – shear strength Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 15630-2, čl.7 | ||
| 1563 | Metallic products | Test of steel weldability Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 9015-1; ČSN EN 10080, příl. B3 | ||
| 1564 | Metallic products | Determination of shape and dimensional accuracy Regulated area: Metallic materials and parts in construction |
ČSN EN 10080, příl. B2; ČSN 42 0008; ČSN EN ISO 15630-1, kap. 10, 11, 12; ČSN EN ISO 15630-3, kap. 14, 15, 16 | ||
| 1565 | Metallic products | Fatigue test at room temperature Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 15630-1, kap. 8; ČSN EN ISO 15630-2, kap. 8; ČSN EN ISO 15630-3, kap. 10; ČSN 42 0363 | ||
| 1566 | Metallic products | Rebend test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 15630-1, kap. 7; ČSN EN ISO 15630-3, kap. 7 | ||
| 1567 | Metallic products | Reverse bend test Regulated area: Metallic materials and parts in construction |
ČSN ISO 7801 | ||
| 1568 | Metallic products | Vickers hardness test Regulated area: Metallic materials and parts in construction |
ČSN EN ISO 6507-1 | ||
| 1569 | Metallic products | Determination of surface protection thickness Regulated area: Metallic materials and parts in construction |
ČSN ISO 2361; ČSN EN ISO 10111; ČSN EN ISO 3882, kap. 4.2, 5.1.1; ČSN EN ISO 2178 | ||
| 1570 | Metal building elements | Test of shape and dimensional accuracy Regulated area: Metallic materials and parts in construction |
ČSN EN 506, příl. A; ČSN EN 508-1, příl. D; ČSN EN 508-2, příl. A; ČSN EN 508-3+A1, příl. B | ||
| 1571 | Flat building elements | Load bearing capacity test Regulated area: Metallic materials and parts in construction |
ČSN 74 6930, čl. 5; ČSN EN 14782 | ||
| 1572 | Metal elements and building components | Load bearing capacity test Regulated area: Metallic materials and parts in construction |
ČSN EN 12767, čl. 4.3; ČSN EN 1993-1-3, příl. A; ČSN EN 40-3-2, čl. 6.7; ČSN EN 845-3+A1, čl. 5.4, 5.5, 5.6 | ||
| 1573 | Screws for sheeting | Shear resistance of the connection Regulated area: Metallic materials and parts in construction |
EAD 330046-01-0602 čl. 2.2.1.1 | ||
| 1574 | Screws for sheeting | Tension resistance of the connection (pull-through and pull-out test) Regulated area: Metallic materials and parts in construction |
EAD 330046-01-0602 čl. 2.2.2.1, 2.2.2.3 | ||
| 1575 | Mortars | Frost resistance test Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 2452 | ||
| 1576 | Hardened mortars | Determination of mass per unit volume Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-10 | ||
| 1577 | Hardened mortars | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 9 | ||
| 1578 | Screed materials | Test of compressive strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.2 | ||
| 1579 | Hardened mortars | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-11, čl. 8 | ||
| 1580 | Screed materials | Test of flexural strength Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-2, čl. 6.1 | ||
| 1581 | Hardened mortars | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-12 | ||
| 1582 | Mortars | Determination of capillary water absorption coefficient Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-18 | ||
| 1583 | Mortars and adhesives | Determination of slip Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.2 | ||
| 1584 | Mortars and adhesives | Determination of open time Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.1 | ||
| 1585 | Mortars | Determination of water vapour diffusion coefficient Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 72 7030, čl. 17 až 24, tab. 1 | ||
| 1586 | Rendering and plastering mortars | Determination of water vapour permeability Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 1015-19, čl. 6.1, 6.2 | ||
| 1587 | Mortars | Determination of water vapour transmission properties Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN 73 2580, čl. 14 až 19 | ||
| 1588 | Screed materials | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 13892-8 | ||
| 1589 | Cement mortars and adhesives | Determination of adhesion Regulated area: Mortars, mortar mixtures, renovation materials, screeds |
ČSN EN 12004-2, čl. 8.3 | ||
| 1590 | Drainage channels for vehicular and pedestrian areas | Load test Regulated area: Draining elements |
ČSN EN 1433, čl. 9.1, 9.2.1, 6.3.3 | ||
| 1591 | Drainage channels for vehicular and pedestrian areas | Determination of dimensions and shape Regulated area: Draining elements |
ČSN EN 1433, čl. 8, 9.3 | ||
| 1592 | Gully tops and manhole tops | Determination of physico- mechanical characteristics Regulated area: Draining elements |
ČSN EN 1433 | ||
| 1593 | Cement | Determination of normal consistency and setting time Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 1 až 6 | ||
| 1594 | Cement | Determination of volume stability Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 7 | ||
| 1595 | Cement | Determination of strength Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-1 | ||
| 1596 | Cement | Determination of fineness by sieving method Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-6, čl. 3.1 až 3.5 | ||
| 1597 | Cement, slag | Determination of particle density Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 2113, čl. 2 až 9; ČSN EN 196-6, čl. 4.5.3 | ||
| 1598 | Cement | Determination of consistency, penetration, water retention, air content by standard mortar testing Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 413-2 | ||
| 1599 | Ash, cinder, slag and other silicate materials | Determination of bulk density (loose, bulk) Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 2071, čl. 11.1, 11.2 | ||
| 1600 | Ash, cinder, slag and other silicate materials | Determination of particle density Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 72 2113, čl. 2 až 9; ČSN EN 196-6, čl. 4.5.3; ČSN EN 450-1, čl. 5.3.4 | ||
| 1601 | Ash, cinder, slag and other silicate materials | Determination of volume stability Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 7; ČSN EN 450-1, čl. 5.3.3 | ||
| 1602 | Ash, cinder, slag and other silicate materials | Determination of efficiency index Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-1; ČSN EN 450-1, čl. 3.5, 5.3.2 | ||
| 1603 | Ash, cinder, slag and other silicate materials | Determination of moisture content by gravimetry Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 15167-1, příl. A | ||
| 1604 | Ash, cinder, slag and other silicate materials | Determination of glass phase content microscopically Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN P CEN/TR 196-4, čl. 7.2.2 až 7.2.2.3.1, 7.2.2.3.2 a) | ||
| 1605 | Ash, cinder, slag and other silicate materials | Determination of efficiency index Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-1; ČSN EN 15167-1, čl. 3.1, 5.3.2.1, 5.3.2.3 | ||
| 1606 | Ash, cinder, slag and other silicate materials | Determination of initial setting time Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-3, čl. 4.1 až 6.3; ČSN EN 15167-1, čl. 5.3.2.2 | ||
| 1607 | Ash, cinder, slag and other silicate materials | Determination of consistence Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN 73 6124-1, příl. B | ||
| 1608 | Cement, slag | Determination of fineness by permeable method Regulated area: Construction cements, fly ash, slags, stabilization of soils, bitumens |
ČSN EN 196-6, čl. 4 | ||
| 1609 | Gypsum binders and gypsum plasters for interior plastering | Determination of flexural strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.5.4 | ||
| 1610 | Gypsum binders and gypsum plasters for interior plastering | Determination of compressive strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.5.5 | ||
| 1611 | Gypsum binders and gypsum plasters for interior plastering | Determination of adhesion Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN EN 13279-2, čl. 4.6 | ||
| 1612 | Gypsum binders | Determination of compressive and bending strength Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN 72 2301, čl. 4, 7, 8 | ||
| 1613 | Gypsum binders | Determination of initial and final setting times Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN 72 2301, čl. 4, 6 | ||
| 1614 | Gypsum binders | Determination of fineness of grinding Regulated area: Gypsum and gypsum products, rock gypsum, anhydride, MgO based panels |
ČSN 72 2301, čl. 4, 5 | ||
| 1615 | Building ceramics | Determination of geometrical parameters and surface quality Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-2, čl. 2, 3, 7 | ||
| 1616 | Building ceramics | Determination of density criteria – absorption power, bulk density, porosity Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-3, čl. 4, 5 | ||
| 1617 | Building ceramics | Determination of bending strength Regulated area: Construction and sanitary ceramics |
ČSN EN ISO 10545-4, čl. 6, 7 | ||
| 1618 | Surface finish | Determination of resistance of paint coatings and varnishes to separation from substrates – cross-cut test Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 2409 | ||
| 1619 | Surface finish | Determination of thickness Regulated area: Cements, adhesives, jointing materials, paints and coatings, surface finishes |
ČSN EN ISO 2808; ČSN EN ISO 1461; ČSN EN ISO 2360; ČSN EN ISO 2178 | ||
| 1620 | Thermal insulation materials and products | Determination of tensile strength parallel to faces Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1608 | ||
| 1621 | Thermal insulation materials and products | Determination of length and width Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 822:2013; ČSN EN ISO 29465 | ||
| 1622 | Thermal insulation materials and products | Determination of thickness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 823:2013; ČSN EN ISO 29466 | ||
| 1623 | Thermal insulation materials and products | Determination of squareness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 824 | ||
| 1624 | Thermal insulation materials and products | Determination of flatness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 825:2013; ČSN EN ISO 29468 | ||
| 1625 | Thermal insulation materials and products | Pressure test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 826:2013; ČSN EN ISO 29469 | ||
| 1626 | Thermal insulation materials and products | Determination of tensile strength perpendicular to faces Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1607 | ||
| 1627 | Thermal insulation materials and products | Determination of dimensional stability under specified temperature and humidity conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1604 | ||
| 1628 | Thermal insulation materials and products | Determination of dimensional stability at constant laboratory conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1603 | ||
| 1629 | Thermal insulation materials and products | Determination of water absorption by partial immersion Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 29767; ČSN EN 1609:2013 | ||
| 1630 | Thermal insulation materials and products | Determination of long term water absorption by immersion Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 16535 | ||
| 1631 | Thermal insulation materials and products | Determination of water vapour transmission rate Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12086 | ||
| 1632 | Thermal insulation materials and products | Bend test Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12089 | ||
| 1633 | Thermal insulation materials and products | Determination of mass per unit volume Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1602:2013; ČSN EN ISO 29470 | ||
| 1634 | Building materials and products | Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12667 | ||
| 1635 | Thermal insulation materials and products | Determination of steady- state thermal resistance by means of guarded hot plate Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12664; ČSN EN 12939; ČSN 72 7012-2; ČSN 72 7012-3; ČSN 72 7014; ČSN 72 7306; ČSN EN 13162+A1, čl. 5.3.2; ČSN EN 13163+A2, čl. 5.3.2; ČSN EN 13164+A1, čl. 5.3.2; ČSN EN 13165+A2, čl. 5.3.2; ČSN EN 13166+A2, čl. 5.3.2; ČSN EN 13167+A1, čl. 5.3.2; ČSN EN 13168+A1, čl. 5.3.2; ČSN EN 13169+A1, čl. 5.3.2; ČSN EN 13170+A1, čl. 5.3.2; ČSN EN 13171+A1, čl. 5.3.2; ČSN EN 1946-2, čl. 5.3.2 | ||
| 1636 | Thermal insulation materials and products | Determination of behaviour under point load Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12430 | ||
| 1637 | Thermal insulation materials and products | Determination of shear strength and shear modulus of elasticity Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12090 | ||
| 1638 | Thermal insulation materials and products | Determination of linear dimensions of test specimens Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12085:2013; ČSN EN ISO 29768 | ||
| 1639 | Thermal insulation materials and products | Determination of dimensions, squareness and flatness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 13162+A1, čl. 5.3; ČSN EN 13163+A2, čl. 5.3; ČSN EN 13164+A1, čl. 5.3; ČSN EN 13165+A2, čl. 5.3; ČSN EN 13166+A2, čl. 5.3; ČSN EN 13167+A1, čl. 5.3; ČSN EN 13168+A1, čl. 5.3; ČSN EN 13169+A1, čl. 5.3; ČSN EN 13170+A1, čl. 5.3; ČSN EN 13171+A1, čl. 5.3; ČSN 72 7302 | ||
| 1640 | Thermal insulation materials and products | Determination of dimensions, squareness and flatness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 13467:2019; ČSN EN ISO 12628 | ||
| 1641 | Thermal insulation materials and products | Determination of water absorption Regulated area: Thermal insulation materials and products, thermal tests |
ČSN 64 5421 | ||
| 1642 | Thermal insulation materials and products | Determination of mass per unit volume, strength, compressibility, humidity and absorption power Regulated area: Thermal insulation materials and products, thermal tests |
ČSN 72 7302 | ||
| 1643 | Thermal insulation materials and products | Determination of pressure forming Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1606:2013; ČSN EN ISO 16534 | ||
| 1644 | Thermal insulation materials and products | Determination of deformation under specified compressive load and temperature conditions Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 1605 | ||
| 1645 | Thermal insulation materials and products | Determination of long term water absorption by diffusion Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN ISO 16536 | ||
| 1646 | Thermal insulation materials and products for floating floors | Determination of thickness Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 12431:2013; ČSN EN ISO 29770 | ||
| 1647 | Thermal insulation materials and products | Determination of mass per unit volume, strength, compressibility, humidity and absorption power Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 13162+A1, čl. 5.3; ČSN EN 13163+A2, čl. 5.3; ČSN EN 13164+A1, čl. 5.3; ČSN EN 13165+A2, čl. 5.3; ČSN EN 13166+A2, čl. 5.3; ČSN EN 13167+A1, čl. 5.3; ČSN EN 13168+A1, čl. 5.3; ČSN EN 13169+A1, čl. 5.3; ČSN EN 13170+A1, čl. 5.3; ČSN EN 13171+A1, čl. 5.3; ČSN EN 13470:2002; ČSN EN ISO 18098; ČSN EN ISO 845; ČSN EN 14303, čl. 5.3 | ||
| 1648 | Thermal insulation materials and products | Determination of thermal conductivity coefficient Regulated area: Thermal insulation materials and products, thermal tests |
ČSN 72 7302 | ||
| 1649 | Building materials and products | Determination of thermal resistance – conductivity of materials and products in steady state Regulated area: Thermal insulation materials and products, thermal tests |
ČSN 72 7302 | ||
| 1650 | Wood wool panels | Determination of load resistance Regulated area: Thermal insulation materials and products, thermal tests |
ČSN EN 13168+A1, příl. D.2, D.3 | ||
| 1651 | Building structures and their parts | Static loading tests Regulated area: Loading tests of bridges, building structure and floors |
ČSN 73 2030, příl. A, B, C | ||
| 1652 | Lintels | Determination of mass Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 845-2, čl. 5.2.2, 5.3 | ||
| 1653 | Ancillary components for masonry, lintels | Determination of flexural resistance and shear resistance Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN EN 846-9 ed. 2 | ||
| 1654 | Aerated concrete components | Loading tests Regulated area: Masonry, hardware, partition walls, ceilings, floors |
ČSN 73 2054; ČSN 73 2034 | ||
| 1655 | Masonry materials and clay roofing tiles | Determination of compressive strength and flexural strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2605, čl. 21 až 28 | ||
| 1656 | Brick products | Determination of freeze resistance Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2601 | ||
| 1657 | Masonry units | Determination of compressive strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-1+A1, čl. 7 až 10 | ||
| 1658 | Concrete masonry units | Determination of percentage area of voids (by paper indentation) Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-2, čl. 7 až 8 | ||
| 1659 | Concrete masonry units | Determination of flexural strength Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-6, čl. 6 až 7 | ||
| 1660 | Burnt masonry elements for damp proof course units | Determination of water absorption by boiling in water Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-7, čl. 5 až 9 | ||
| 1661 | Calcium silicate masonry units, aerated concrete units | Determination of moisture content by gravimetry Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-10, čl. 6 a 7 | ||
| 1662 | Concrete masonry units and burnt masonry units | Determination of water absorption due to capillary action and the initial rate of water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-11 | ||
| 1663 | Masonry units | Determination of mass per unit volume Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-13 | ||
| 1664 | Masonry units | Determination of moisture movement Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-14 | ||
| 1665 | Masonry units | Determination of dimensions Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-16, čl. 6 až 8 | ||
| 1666 | Masonry units | Determination of flatness of faces Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 772-20, čl. 5 | ||
| 1667 | Aerated concrete | Determination of shrinkage Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 680 | ||
| 1668 | Brick products | Determination of appearance and dimensions Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN 72 2602 | ||
| 1669 | Masonry units | Determination of water absorption Regulated area: Masonry units, permanent formwork, ceiling elements, burnt and concrete roofing |
ČSN EN 771-1+A1, příl. C | ||
| 1670 | Aggregates | Aggregate sampling Regulated area: Sampling |
ČSN EN 932-1 | ||
| 1671 | Cement, fly ash and ground granulated blast furnace slag | Sampling of cement, fly ash and slag Regulated area: Sampling |
ČSN EN 196-7, čl. 1 až 10 | ||
| ZÚLP Testing laboratory (1000) | |||||
| 1672 | Toys | Small parts cylinder test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.2; ASTM F 963, čl. 4.6.1 | ||
| 1673 | Toys | Torsion test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.3; ASTM F 963, čl. 8.8 | ||
| 1674 | Toys | Tensile test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.4; ASTM F 963, čl. 8.9 | ||
| 1675 | Toys | Drop test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.5 | ||
| 1676 | Toys | Tip over test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.6 | ||
| 1677 | Toys | Impact test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.7 | ||
| 1678 | Toys | Pressure test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.8; ASTM F 963 čl. 8.10 | ||
| 1679 | Toys | Steeping test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.9 | ||
| 1680 | Toys | Test of accessibility of a part or component Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.10 | ||
| 1681 | Toys | Test of edge sharpness Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.11; ASTM F 963, čl. 4.7.1 | ||
| 1682 | Toys | Test of point sharpness Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.12; ASTM F 963, čl. 4.9.1 | ||
| 1683 | Toys | Test of flexibility of metallic wire Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.13; ASTM F 963, čl. 8.12 | ||
| 1684 | Toys | Test of expansion of materials Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.14 | ||
| 1685 | Liquid-filled toys | Leakage test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.15 | ||
| 1686 | Toys for small children | Check of size and geometric shape Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.16; ASTM F 963, čl. 4.22, 4.23, 4.24 | ||
| 1687 | Toys | Test of durability of mouth- actuated toys Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.17 | ||
| 1688 | Toys | Test of folding or sliding mechanisms and openings Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.18; ASTM F 963, čl. 4.18 | ||
| 1689 | Toys | Test of cords cross-sectional dimension Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.20 | ||
| 1690 | Toys | Static strength test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.21 | ||
| 1691 | Toys | Dynamic strength test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.22 | ||
| 1692 | Toys | Stability test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.23 | ||
| 1693 | Toys | Test of the kinetic energy of projectiles Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.24 | ||
| 1694 | Toys | Measurement of the thickness of plastic sheets Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.25 | ||
| 1695 | Toys | Test of brake performance Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.26 | ||
| 1696 | Children's scooters | Test of the strength of toy scooter steering tubes Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.27 | ||
| 1697 | Toys | Determination of maximum design speed of electrically- driven ride-on toys Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.29 | ||
| 1698 | Toys | Temperature rise test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.30 | ||
| 1699 | Toys | Test of lowering of toy chest lids Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.31 | ||
| 1700 | Toys | Small balls and suction cups test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.32 | ||
| 1701 | Toys | Test for play figures Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.33 | ||
| 1702 | Toys | Tension test for magnets Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.34 | ||
| 1703 | Toys | Determination of magnetic flux index Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.35; ASTM 963, čl. 8.25 | ||
| 1704 | Toys | Test of perimeter of cords and chains Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.36 | ||
| 1705 | Yo - yo balls | Measurement of cord length Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.37 | ||
| 1706 | Toys | Breakaway feature separation test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.38 | ||
| 1707 | Toys | Test of self-retracting cords Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.39 | ||
| 1708 | Toys | Test of length of cords, chains and electrical cables Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.40 | ||
| 1709 | Toys | Test of the safe distance of connected edges and hinges Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 4.10.3 | ||
| 1710 | Toys | Test of springs – measurement of the distance between coils Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 4.10.4 | ||
| 1711 | Toys | Test of the tangle potential of two cords or chains Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.41 | ||
| 1712 | Toys | Determination of projectile range Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.42 | ||
| 1713 | Toys | Determination of the dimension of leading parts Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.43 | ||
| 1714 | Toys | Measurement of the length of suction cup projectiles Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.44 | ||
| 1715 | Toys – containers and glassware | Test of limit dimensions Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-4 ed. 2, čl. 5.2.1.1 | ||
| 1716 | Toys – closures of chemical containers | Test of container closures Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-4 ed. 2, čl. 5.2.4 | ||
| 1717 | Toys – chemistry sets | Test tube holder stability test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-4 ed. 2, čl. 5.4 | ||
| 1718 | Activity toys | Stability test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-8, čl. 6.2 | ||
| 1719 | Activity toys | Static strength test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-8, čl. 6.3 | ||
| 1720 | Barriers and handrails of activity toys | Dynamic strength test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-8, čl. 6.4 | ||
| 1721 | Activity toys | Test for head and neck entrapment Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-8, čl. 6.5 | ||
| 1722 | Activity toys | Test for clothing and hair entrapment Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-8, čl. 6.6 | ||
| 1723 | Activity toys | Measurement of angle and inclination Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-8, čl. 6.7 | ||
| 1724 | Activity toys | Assessment of the diameter of ropes and other means of suspension Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-8, čl. 6.8 | ||
| 1725 | Activity toys – paddling pools | Static load resistance test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-8, čl. 6.10 | ||
| 1726 | Toys, products for children, wooden school supplies | Test of material resistance to sweat and saliva Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
Vyhláška č. 84/2001 Sb. | ||
| 1727 | Toys | Fall test for toys with wheels Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ASTM F 963, čl. 8.7.3 | ||
| 1728 | Toys | Impact test for toys that cover the face Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ASTM F 963, čl. 8.7.4 | ||
| 1729 | Toys | Tension and compression test of tires, wheels and axles Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ASTM F 963, čl. 8.11 | ||
| 1730 | Toys | Determination of the electric resistivity of cords Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-1+A1, čl. 8.19 | ||
| 1731 | Toys | Assessment of heating and abnormal operation Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 9 | ||
| 1732 | Toys | Test of electric strength Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 10 | ||
| 1733 | Toys | Test of humidity resistance Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 11 | ||
| 1734 | Toys | Test of mechanical strength Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 12 | ||
| 1735 | Toys | Assessment of structure Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 13.1, 13.3-13.5 | ||
| 1736 | Toys | Test of wire supply protection Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 14 | ||
| 1737 | Toys | Test of screws and connections Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 16 | ||
| 1738 | Toys | Assessment of creepage distances and clearances Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 17 | ||
| 1739 | Toys | Test of resistance to heat and fire – ball pressure test method Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 18; IEC 60695-10-2 | ||
| 1740 | Toys | Test of resistance to heat and fire – glowing/hot-wire based test methods Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 18; IEC 60695-2-11 | ||
| 1741 | Toys | Test of resistance to heat and fire – needle-flame test method Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN IEC 62115 ed. 2, čl. 18; IEC 60695-11-5 | ||
| 1742 | Toys | Test of flammability of textile materials Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 71-2, čl. 5 | ||
| 1743 | Playground equipment | Physical tests of structural integrity Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-1 ed. 2 +A1, příl. C | ||
| 1744 | Playground equipment | Test of the entrapment of body parts and clothing Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-1 ed. 2 +A1, příl. D | ||
| 1745 | Playground equipment – swings | Test of suspension by dynamic load Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-2 ed. 2, příl. C | ||
| 1746 | Playground equipment – slides | Assessment of slide surface Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-3 ed. 2, čl. 4.6 | ||
| 1747 | Playground equipment - cableways | Determination of the efficiency of stops Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-4 ed. 2, příl. A | ||
| 1748 | Playground equipment - cableways | Test of the maximum speed of travel Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-4 ed. 2, příl. B | ||
| 1749 | Playground equipment – merry-go-rounds | Test of the attachment strength of supporting structure components to the rotating shaft Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-5, příl. A | ||
| 1750 | Playground equipment – rocking equipment | Determination of stand slope Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-6 ed. 2, příl. B | ||
| 1751 | Playground equipment – rocking equipment | Determination of freedom from pinch and crush points Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-6 ed. 2, příl. C | ||
| 1752 | Playground equipment – rocking equipment | Determination of lateral stability Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 1176-6 ed. 2, příl. D | ||
| 1753 | Artificial climbing structures | Test of the structural integrity of protection point connections Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 12572-1, příl. C | ||
| 1754 | Artificial climbing structures | Impact test of surface elements Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 12572-1, příl. D; ČSN EN 12572-2, příl. C | ||
| 1755 | Artificial climbing structures | Panel insert resistance test Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
Metoda ZL č. 64 (ČSN EN 12572-1, příl. E; ČSN EN 12572-2, příl. D) | ||
| 1756 | Artificial climbing structures | Verification of the correct installation of elements Regulated area: Games, toys and school supplies, playgrounds, matches and lighters |
ČSN EN 12572-1, příl. F | ||
| 1757 | Detergents | Determination of performance – comparative test Regulated area: Household chemicals – cleaning and washing agents |
Metoda ZL č. 3 (ISO 4319:1977; DIN 53990) | ||
| 1758 | Cleaning agents | Determination of cleaning performance – tile test Regulated area: Household chemicals – cleaning and washing agents |
Metoda ZL č. 4, metoda A, B, C, D (Horáková, kolektiv) | ||
| 1759 | Cleaning agents | Washing performance test Regulated area: Household chemicals – cleaning and washing agents |
Metoda ZL č. 5 metoda A, B (ČSN EN 50242:1999, čl. 6.3, 6.4, 6.7.1) | ||
| 1760 | Building products, paints, PBU | Determination of volatile organic compound (VOC) emissions by GC-MS (test cell method) and sum of VOCs by calculation Regulated area: Analytical tests |
Metodika č. 100660 (ČSN EN ISO 16000-10; ČSN EN 16516+A1) | ||
| 1761 | PBU | Determination of chlorinated phosphorus- based flame retardants by GC-MS method Regulated area: Analytical tests |
Metodika č. 100601-01 (ČSN EN 71-16) | ||
| 1762 | PBU | Determination of primary aromatic amines by GC-MS method Regulated area: Analytical tests |
Metodika č. 100601-03 (ČSN EN 71-9+A1:2007; ČSN EN 71-10; ČSN EN 71-11, čl. 5.4) | ||
| 1763 | PBU | Determination of the migration of plastic monomers (bisphenol A) by HPLC-DAD method Regulated area: Analytical tests |
Metodika č. 100601-04 (ČSN EN 71-19) | ||
| 1764 | PBU | Determination of the migration of plastic monomers (formaldehyde) by spectrophotometry Regulated area: Analytical tests |
Metodika č. 100601-05 (ČSN EN 71-9+A1:2007; ČSN EN 71-10; ČSN EN 71-11, čl. 5.5.3) | ||
| 1765 | PBU | Determination of the migration of plastic monomers (styrene) by GC- MS method Regulated area: Analytical tests |
Metodika č. 100601-06 (metodika firmy SHIMADZU PO-CON 1464E) | ||
| 1766 | PBU | Determination of the migration of solvents (trichloroethylene, dichloromethane) by GC- MS method Regulated area: Analytical tests |
Metodika č. 100601-07 (ČSN EN 71-9+A1:2007; ČSN EN 71-10; ČSN EN 71-11, čl. 5.5.4) | ||
| 1767 | PBU | Determination of the migration of solvents (methanol, toluene, benzene, ethylbenzene, xylenes, cyclohexanone) by GC-MS method Regulated area: Analytical tests |
Metodika č. 100601-08 (ČSN EN 71-9+A1:2007; ČSN EN 71-10; ČSN EN 71-11, čl. 5.5.5) | ||
| 1768 | PBU | Determination of the migration of solvents by GC-MS method Regulated area: Analytical tests |
Metodika č. 100601-09 (ČSN EN 71-9+A1:2007; ČSN EN 71-10; ČSN EN 71-11, čl. 5.5.5.4) | ||
| 1769 | PBU | Determination of solvents (inhalation) by GC-MS method Regulated area: Analytical tests |
Metodika č. 100601-10 (ČSN EN 71-9+A1:2007; ČSN EN 71-10; ČSN EN 71-11, čl. 5.5.6) | ||
| 1770 | PBU | Determination of wood preservatives by GC-MS method Regulated area: Analytical tests |
Metodika č. 100601-11 (ČSN EN 71-9+A1:2007; ČSN EN 71-10; ČSN EN 71-11, čl. 5.6) | ||
| 1771 | PBU | Determination of the migration of softeners by GC-MS method Regulated area: Analytical tests |
Metodika č. 100601-13 (ČSN EN 71-9+A1:2007; ČSN EN 71-10; ČSN EN 71-11, čl. 5.8) | ||
| 1772 | PBU, paints, plastics, building products, textiles | Determination of phthalates by GC-MS and sum of phthalates by calculation Regulated area: Analytical tests |
Metodika č. 100602 (CPSC-CH-C1001-09.4; ČSN EN ISO 14389) | ||
| 1773 | PBU, plastics, building products, paper, cardboard, textiles, wood (aqueous leachates) | Determination of phenolic compounds by spectrophotometry Regulated area: Analytical tests |
Metodika č. 100604 (ČSN ISO 6439; ČSN EN 71-18) | ||
| 1774 | PBU, paints, paper, cardboard, textiles, plastics, building products | Determination of PCB by GC/ECD method and sum of PCB by calculation Regulated area: Analytical tests |
Metodika č. 100605-01A (ČSN EN ISO 15318) | ||
| 1775 | Waste, solid samples, oils | Determination of PCB by GC/ECD method and sum of PCB by calculation Regulated area: Analytical tests |
Metodika č. 100605-01B (ČSN EN 17322) | ||
| 1776 | PBU, paints, paper, cardboard, textiles, plastics, building products | Determination of PBB by GC-MS method and the sum of PBB by calculation Regulated area: Analytical tests |
Metodika č. 100605-02 (EPA-560/13-79-001) | ||
| 1777 | PBU, paints, paper, cardboard, textiles, plastics, building products | Determination of PBDE by GC-MS and sum of PBDE by calculation Regulated area: Analytical tests |
Metodika č. 100605-03 (Application Note 10047 firmy Thermo Scientific) | ||
| 1778 | Waste, solid samples, bituminous mixtures | Determination of dry matter by gravimetry and calculation of water content Regulated area: Analytical tests |
Metodika č. 100606 (ČSN ISO 11465) | ||
| 1779 | Textiles (aqueous leachate) | Determination of extractable formaldehyde by spectrophotometry Regulated area: Analytical tests |
Metodika č. 100607-01 (ČSN EN ISO 14184-1) | ||
| 1780 | Paper, cardboard, cardboard (aqueous leachate) | Determination of formaldehyde by spectrophotometry Regulated area: Analytical tests |
Metodika č. 100607-02 (ČSN EN 645; ČSN EN 1541) | ||
| 1781 | Furniture, wood-based panels, toys | Determination of free formaldehyde by the chamber method – by spectrophotometry Regulated area: Analytical tests |
Metodika č. 100607-03 (ČSN EN 717-1) | ||
| 1782 | Toys | Determination of formaldehyde by the bottle method – by spectrophotometry Regulated area: Analytical tests |
Metodika č. 100607-04 (ČSN EN 717-3) | ||
| 1783 | Wall coverings | Determination of releasable formaldehyde by the bottle method – by spectrophotometry Regulated area: Analytical tests |
Metodika č. 100607-05 (ČSN EN 12149) | ||
| 1784 | Toys, materials for the manufacture of toys, products for children up to three years of age, plastics, paints, writing utensils (leachates) | Determination of migration of elements by flame AAS Regulated area: Analytical tests |
Metodika č. 100608-01 (ČSN EN 71-3+A2; ČSN ISO 8288; ČSN EN ISO 5961; ČSN EN 1233; ČSN EN ISO 12020; ČSN 75 7385; TNV 75 7408) | ||
| 1785 | Toys, materials for the manufacture of toys, products for children up to three years of age, plastics, paints, writing utensils (leachates) | Determination of Hg migration with the AMA analyser Regulated area: Analytical tests |
Metodika č. 100608-02 (ČSN EN 71-3+A2; Návod firmy ALTEC) | ||
| 1786 | Toys, materials for the manufacture of toys, products for children up to three years of age, plastics, paints, writing utensils (leachates) | Determination of migration of elements by ETA-AAS method Regulated area: Analytical tests |
Metodika č. 100608-03 (ČSN EN 71-3+A2; ČSN EN ISO 15586) | ||
| 1787 | Enamels, glass, ceramics, porcelain (leachates in acetic acid) | Determination of metals (Cd, Pb) by flame AAS Regulated area: Analytical tests |
Metodika č. 100610 (ČSN EN 1388-1; ČSN EN 1388-2) | ||
| 1788 | Plastics, paper, cardboard, metal materials, packaging, toys, materials for toy manufacture, paints, coatings, building products, matches | Determination of elements by flame AAS method Regulated area: Analytical tests |
Metodika č. 100611-01A (ČSN ISO 8288; ČSN EN ISO 5961; ČSN EN 1233; ČSN EN ISO 12020; ČSN 75 7385; TNV 75 7408; ČSN EN 1783) | ||
| 1789 | Waste, solid samples | Determination of elements by flame AAS method Regulated area: Analytical tests |
Metodika č. 100611-01B (ČSN EN ISO 54321; ČSN EN 13657; ČSN ISO 8288; ČSN EN ISO 5961; ČSN EN 1233; ČSN EN ISO 12020; ČSN 75 7385; TNV 75 7408) | ||
| 1790 | Plastics, paper, cardboard, metal materials, packaging, toys, paints, coatings, building products, matches, waste, solid samples | Determination of Hg by AMA analyser Regulated area: Analytical tests |
Metodika č. 100611-02 (ČSN EN 1783; Návod firmy ALTEC) | ||
| 1791 | Products for children, toys | Determination of total Pb content by flame AAS method Regulated area: Analytical tests |
Metodika č. 100611-03 (CPSC-CH-E1001-08.3; CPSC-CH-E1002-08.3) | ||
| 1792 | PBU, coatings, paints, rubbers, silicones, elastomers, paper, cardboard, toys, costume jewellery, building products (aqueous leachates) | Determination of elements by flame AAS method Regulated area: Analytical tests |
Metodika č. 100612-01A (ČSN ISO 8288; ČSN EN ISO 5961; ČSN EN 1233; ČSN EN ISO 12020; ČSN 75 7385; TNV 75 7408; ČSN EN 1811+A1:2016; ČSN EN 12472+A1:2009) | ||
| 1793 | Water, aqueous leachates (waste, solid samples) | Determination of elements by flame AAS method Regulated area: Analytical tests |
Metodika č. 100612-01B (ČSN ISO 8288; ČSN EN ISO 5961; ČSN EN 1233; ČSN EN ISO 12020; ČSN 75 7385; TNV 75 7408) | ||
| 1794 | Water, aqueous leachates (PBU, coatings, paints, rubbers, silicones, elastomers, paper, cardboard, toys, costume jewellery, building products) | Determination of Hg by AMA analyser Regulated area: Analytical tests |
Metodika č. 100612-02 (ČSN 75 7440; Návod firmy ALTEC) | ||
| 1795 | PBU, coatings, paints, rubbers, silicones, elastomers, paper, cardboard, toys, costume jewellery, building products (aqueous leachates) | Determination of elements by ETA-AAS method Regulated area: Analytical tests |
Metodika č. 100612-03A (ČSN EN ISO 15586) | ||
| 1796 | Water, aqueous leachates (waste, solid samples) | Determination of elements by ETA-AAS method Regulated area: Analytical tests |
Metodika č. 100612-03B (ČSN EN ISO 15586) | ||
| 1797 | Water, aqueous leachates (waste, solid samples, paper, cardboard, light industry products, toys, building products) | Determination of pH by potentiometry Regulated area: Analytical tests |
Metodika č. 100614 (ČSN ISO 10523; ČSN EN ISO 787-9; ČSN EN ISO 3071; ČSN EN 12457-4) | ||
| 1798 | Rubber, silicones, elastomers, plastics | Determination of reducing substances by titration Regulated area: Analytical tests |
Metodika č. 100617-01 (ČSN 62 1156, čl. 9B) | ||
| 1799 | Rubber, silicones, elastomers, plastics | Determination of evaporation residue by gravimetry Regulated area: Analytical tests |
Metodika č. 100617-02 (ČSN 62 1156, čl. 12) | ||
| 1800 | Rubber, silicones, elastomers, plastics | Qualitative determination of chloride, ammonium, aromatic amines, sulphides, hyposulphites, barium and opalescence by colorimetry Regulated area: Analytical tests |
Metodika č. 100617-03 (ČSN 62 1156, čl. 13, 16 až 22) | ||
| 1801 | Plastics, coatings, toys, materials for toy manufacture | Determination of extractives by gravimetry Regulated area: Analytical tests |
Metodika č. 100626 (Nařízení Komise (EU) č. 10/2011, příloha III) | ||
| 1802 | Plastics, coatings, toys, materials for toy manufacture | Determination of primary aromatic amines by spectrophotometry Regulated area: Analytical tests |
Metodika č. 100630 (ČSN 62 1156, čl. 18) | ||
| 1803 | Waste, solid samples | Determination of PAH by GC-MS method and the sum of PAH by calculation Regulated area: Analytical tests |
Metodika č. 100635A (ČSN EN 17503) | ||
| 1804 | Plastics, rubbers, toys, materials for toy manufacture | Determination of PAH by GC-MS method and the sum of PAH by calculation Regulated area: Analytical tests |
Metodika č. 100635B (AfPS GS 2019:01 PAK; ČSN EN 17503) | ||
| 1805 | Toys, materials for toy manufacture, textiles, coatings | Determination of aromatic amines after splitting of azo dyes – by GC-MS method Regulated area: Analytical tests |
Metodika č. 100640 (ČSN EN 71-7+A3) | ||
| 1806 | Plastics, toys, materials for toy manufacture, wall coverings | Determination of vinyl chloride by GC-MS method Regulated area: Analytical tests |
Metodika č. 100663 (ČSN EN 12149) | ||
| 1807 | Plastics, elastomers, toys, materials for toy manufacture, building products, paints | Screening and identification of organic compounds (specific migration) - by GC-MS method Regulated area: Analytical tests |
Metodika č. 100664 (Nařízení Komise (EU) č. 10/2011, příloha I) | ||
| 1808 | Waters, extracts, chemicals, wastes, solid samples, building products, PBU | Determination of mobility inhibition in crustaceans (Daphnia magna) Regulated area: Analytical tests |
Metodika č. 100670 (ČSN EN ISO 6341) | ||
| 1809 | Waters, extracts, chemicals, wastes, solid samples, building products, PBU | Determination of algal growth inhibition test (Desmodesmus subspicatus) Regulated area: Analytical tests |
Metodika č. 100671 (ČSN EN ISO 8692) | ||
| 1810 | Waters, extracts, chemicals, wastes, solid samples, building products, PBU | White mustard (Sinapis alba ) root growth inhibition test Regulated area: Analytical tests |
Metodika č. 100672 (Metodický pokyn 8, Věstník MŽP ČR, roč. XVII, č. 4/2007) | ||
| 1811 | Solid samples, waste, building products | Determination of root growth inhibition in lettuce Lactuca sativa Regulated area: Analytical tests |
Metodika č. 100674 (ČSN EN ISO 11269-1; Příloha č. 5 k Vyhlášce č. 273/2021 Sb.) | ||
| 1812 | Lighters | Flame height measurement Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.2 | ||
| 1813 | Lighters | Spitting, sputtering and flaring tests Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.3 | ||
| 1814 | Lighters | Flame extinction test Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.4 | ||
| 1815 | Lighters | Fuel compatibility test Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.5 | ||
| 1816 | Lighters | Refilling test Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.6 | ||
| 1817 | Lighters | Test of volumetric fuel displacement Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.7 | ||
| 1818 | Lighters | Fall test Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.8 | ||
| 1819 | Lighters | Elevated-temperature test Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.9 | ||
| 1820 | Lighters | Internal pressure test Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.10 | ||
| 1821 | Lighters | Cyclic-burning-time test Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.11 | ||
| 1822 | Lighters | Continuous-burning-time test Regulated area: Light industry products |
ČSN EN ISO 9994, čl. 6.12 | ||
| 1823 | Child-resistant lighters | Test of child-resistant lighters Regulated area: Light industry products |
ČSN EN 13869, čl. 5 | ||
| 1824 | Matches | Striking performance test Regulated area: Light industry products |
ČSN EN 1783, příl. A | ||
| 1825 | Matches | Test of heat ignition (self- ignition) Regulated area: Light industry products |
ČSN EN 1783, příl. B | ||
| 1826 | Matches | Test of striking surface performance Regulated area: Light industry products |
ČSN EN 1783, příl. C | ||
| 1827 | Matches | Impact resistance test Regulated area: Light industry products |
ČSN EN 1783, příl. D | ||
Reference standards (849)
ASTM 963
ASTM C 1260-14:2014
ASTM F 963
ASTM F 963 čl. 8.10
AfPS GS 2019:01 PAK
Application Note 10047 firmy Thermo Scientific
CPSC-CH-C1001-09.4
CPSC-CH-E1001-08.3
CPSC-CH-E1002-08.3
DIN 51064
DIN 51068-1
DIN 51097
DIN 51130
DIN 53990
Doporučení SÚJB DR-RO-5.2
EAD 040016-01-0404
EAD 040083-00-0404
EAD 040083-01-0404
EAD 040089-00-0404
EAD 040287-00- 0404
EAD 040287-00-0404
EAD 040287-01-0404
EAD 040465-00-0404
EAD 090019-00-0404
EAD 090019-01-0404
EAD 090034-01-0404
EAD 090062-01-0404
EAD 130367-00-0304
EAD 210005-00-0505
EAD 210046-00-1201
EAD 260023-00-0301
EAD 330046-01-0602 čl. 2.2.1.1
EAD 330046-01-0602 čl. 2.2.2.1, 2.2.2.3
EGOLF EA 05
EN 12003:2008
EN 1324:2007
EN 1348:2007
EOTA TR 001
EOTA TR 004
EOTA TR 005
EOTA TR 006
EOTA TR 007
EOTA TR 010
EOTA TR 011
EOTA TR 012
EOTA TR 46
EPA-560/13-79-001
ETAG 017
EU
Horáková, kolektiv
IEC 60695-10-2
IEC 60695-11-5
IEC 60695-2-11
IP 0200T001
IP 0200T002
IP 0340T068
IP 0400T013
IP 0400T014
IP 0600T013
ISO 10406-1
ISO 23351-1
ISO 4319:1977
ISO 7892
ISO 8302
Manuál k zařízení Pile echo tester
Metoda ZL č. 3
Metoda ZL č. 4
Metoda ZL č. 5 metoda A, B
Metoda ZL č. 64
Metodický pokyn 8, Věstník MŽP ČR, roč. XVII, č. 4/2007
Metodika č. 100601-01
Metodika č. 100601-03
Metodika č. 100601-04
Metodika č. 100601-05
Metodika č. 100601-06
Metodika č. 100601-07
Metodika č. 100601-08
Metodika č. 100601-09
Metodika č. 100601-10
Metodika č. 100601-11
Metodika č. 100601-13
Metodika č. 100602
Metodika č. 100604
Metodika č. 100605-01A
Metodika č. 100605-01B
Metodika č. 100605-02
Metodika č. 100605-03
Metodika č. 100606
Metodika č. 100607-01
Metodika č. 100607-02
Metodika č. 100607-03
Metodika č. 100607-04
Metodika č. 100607-05
Metodika č. 100608-01
Metodika č. 100608-02
Metodika č. 100608-03
Metodika č. 100610
Metodika č. 100611-01A
Metodika č. 100611-01B
Metodika č. 100611-02
Metodika č. 100611-03
Metodika č. 100612-01A
Metodika č. 100612-01B
Metodika č. 100612-02
Metodika č. 100612-03A
Metodika č. 100612-03B
Metodika č. 100614
Metodika č. 100617-01
Metodika č. 100617-02
Metodika č. 100617-03
Metodika č. 100626
Metodika č. 100630
Metodika č. 100635A
Metodika č. 100635B
Metodika č. 100640
Metodika č. 100660
Metodika č. 100663
Metodika č. 100664
Metodika č. 100670
Metodika č. 100671
Metodika č. 100672
Metodika č. 100674
Nařízení Komise
Návod firmy ALTEC
OTP ČD 58979/04-013
Příloha č. 5 k Vyhlášce č. 273/2021 Sb.
Rev. 0.0
TNV 75 7408
Vyhláška č. 84/2001 Sb.
Věstník MZ ČR, 2013
Věstník MZ ČR, 2023
WTA 2-9:03/2020
metodika firmy SHIMADZU PO-CON 1464E
ČSN 42 0008
ČSN 42 0363
ČSN 50 3602
ČSN 62 1156
ČSN 64 5421
ČSN 72 0102
ČSN 72 0103
ČSN 72 0105-1
ČSN 72 0105-2
ČSN 72 0106
ČSN 72 0107
ČSN 72 0108:1974
ČSN 72 0113-1
ČSN 72 0113-2
ČSN 72 0113-3
ČSN 72 0114-1
ČSN 72 0114-2
ČSN 72 0114-3
ČSN 72 0117
ČSN 72 0118
ČSN 72 1006
ČSN 72 1010
ČSN 72 1018
ČSN 72 1021
ČSN 72 1070
ČSN 72 1080
ČSN 72 1089
ČSN 72 1090
ČSN 72 1176
ČSN 72 1179
ČSN 72 1180
ČSN 72 1187
ČSN 72 1206
ČSN 72 1213
ČSN 72 2071
ČSN 72 2080
ČSN 72 2113
ČSN 72 2301
ČSN 72 2452
ČSN 72 2453:1968
ČSN 72 2454:1968
ČSN 72 2601
ČSN 72 2602
ČSN 72 2603
ČSN 72 2605
ČSN 72 2607
ČSN 72 2608
ČSN 72 2642
ČSN 72 4710
ČSN 72 4841
ČSN 72 5010
ČSN 72 5191
ČSN 72 5250
ČSN 72 6031
ČSN 72 6100
ČSN 72 7012-1
ČSN 72 7012-2
ČSN 72 7012-3
ČSN 72 7014
ČSN 72 7030
ČSN 72 7302
ČSN 72 7306
ČSN 73 0212-5
ČSN 73 1316:2003
ČSN 73 1318
ČSN 73 1320
ČSN 73 1321:2003
ČSN 73 1322
ČSN 73 1326
ČSN 73 1370
ČSN 73 1373
ČSN 73 2011
ČSN 73 2030
ČSN 73 2034
ČSN 73 2035
ČSN 73 2045
ČSN 73 2054
ČSN 73 2577
ČSN 73 2578
ČSN 73 2579
ČSN 73 2580
ČSN 73 2581
ČSN 73 2582
ČSN 73 2824-1
ČSN 73 6124-1
ČSN 73 6174
ČSN 73 6175
ČSN 73 6190
ČSN 73 6209
ČSN 73 6242
ČSN 73 6242, pří. E
ČSN 74 3305
ČSN 74 6930
ČSN 75 0905
ČSN 75 7385
ČSN 75 7440
ČSN EN 1008
ČSN EN 10080
ČSN EN 1015-1
ČSN EN 1015-10
ČSN EN 1015-11
ČSN EN 1015-12
ČSN EN 1015-17
ČSN EN 1015-18
ČSN EN 1015-19
ČSN EN 1015-2
ČSN EN 1015-21
ČSN EN 1015-3
ČSN EN 1015-4
ČSN EN 1015-6
ČSN EN 1015-7
ČSN EN 1015-9
ČSN EN 10223-3
ČSN EN 1024
ČSN EN 10244-1
ČSN EN 10244-2
ČSN EN 10245-1
ČSN EN 1026
ČSN EN 1027
ČSN EN 1052-1
ČSN EN 1052-2
ČSN EN 1052-3
ČSN EN 1058
ČSN EN 1062-3
ČSN EN 1062-6
ČSN EN 1075
ČSN EN 1094-1
ČSN EN 1094-4
ČSN EN 1094-6
ČSN EN 1097-1
ČSN EN 1097-2
ČSN EN 1097-3
ČSN EN 1097-5
ČSN EN 1097-6
ČSN EN 1097-7
ČSN EN 1097-8
ČSN EN 1107-1
ČSN EN 1107-2
ČSN EN 1109
ČSN EN 1110
ČSN EN 1128
ČSN EN 1168+A3
ČSN EN 1170
ČSN EN 1176-1 ed. 2 +A1
ČSN EN 1176-2 ed. 2
ČSN EN 1176-3 ed. 2
ČSN EN 1176-4 ed. 2
ČSN EN 1176-5
ČSN EN 1176-6 ed. 2
ČSN EN 12003:2009
ČSN EN 12004-2
ČSN EN 12085:2013
ČSN EN 12086
ČSN EN 12087:2013
ČSN EN 12089
ČSN EN 12090
ČSN EN 12149
ČSN EN 12190
ČSN EN 12211
ČSN EN 12310-1
ČSN EN 12311-1
ČSN EN 12311-2
ČSN EN 12316-1
ČSN EN 12316-2
ČSN EN 12317-2
ČSN EN 12326-2
ČSN EN 1233
ČSN EN 12350-1
ČSN EN 12350-2
ČSN EN 12350-3
ČSN EN 12350-4
ČSN EN 12350-5
ČSN EN 12350-6
ČSN EN 12350-7
ČSN EN 12371, zkouška A
ČSN EN 12372
ČSN EN 12390-1
ČSN EN 12390-2
ČSN EN 12390-3
ČSN EN 12390-5
ČSN EN 12390-6
ČSN EN 12390-7
ČSN EN 12390-8
ČSN EN 124-1
ČSN EN 124-3
ČSN EN 124-5
ČSN EN 124-6
ČSN EN 12412-2
ČSN EN 12427
ČSN EN 12428
ČSN EN 12430
ČSN EN 12431:2013
ČSN EN 12444
ČSN EN 12457-4
ČSN EN 12467+A2
ČSN EN 12472+A1:2009
ČSN EN 12489
ČSN EN 12504-1
ČSN EN 12504-2
ČSN EN 1253-2
ČSN EN 12566-1
ČSN EN 12572-1
ČSN EN 12572-2
ČSN EN 12617-1
ČSN EN 12617-4
ČSN EN 12664
ČSN EN 12667
ČSN EN 12767
ČSN EN 12797
ČSN EN 12839 ed. 2
ČSN EN 12939
ČSN EN 1296
ČSN EN 1297
ČSN EN 13036-1
ČSN EN 13036-4
ČSN EN 13049
ČSN EN 13055
ČSN EN 13057
ČSN EN 13162+A1
ČSN EN 13163+A2
ČSN EN 13164+A1
ČSN EN 13165+A2
ČSN EN 13166+A2
ČSN EN 13167+A1
ČSN EN 13168+A1
ČSN EN 13169+A1
ČSN EN 13170+A1
ČSN EN 13171+A1
ČSN EN 13179-1
ČSN EN 13183-2
ČSN EN 13198
ČSN EN 13224
ČSN EN 13230-2
ČSN EN 13230-4+A1
ČSN EN 1324:2008
ČSN EN 13279-2
ČSN EN 1328
ČSN EN 13286-2
ČSN EN 13286-41
ČSN EN 13286-47
ČSN EN 13286-53
ČSN EN 13294
ČSN EN 13295
ČSN EN 13369
ČSN EN 13369:2013
ČSN EN 1338
ČSN EN 13383-1
ČSN EN 13383-2
ČSN EN 1339
ČSN EN 1340
ČSN EN 13407+A1
ČSN EN 13412
ČSN EN 13416
ČSN EN 1344
ČSN EN 13450
ČSN EN 13451-1+A1
ČSN EN 13454-2
ČSN EN 13467:2019
ČSN EN 13470:2002
ČSN EN 1348:2008
ČSN EN 13494
ČSN EN 13495
ČSN EN 13496
ČSN EN 13496 EAD 040016-01-0404
ČSN EN 13497+A1
ČSN EN 134971+A1
ČSN EN 1351
ČSN EN 13529
ČSN EN 1353
ČSN EN 13596
ČSN EN 13657
ČSN EN 1367-1
ČSN EN 1367-2
ČSN EN 1367-3
ČSN EN 1367-4
ČSN EN 1367-7
ČSN EN 13687-1
ČSN EN 13687-3
ČSN EN 13693+A1
ČSN EN 13748-1
ČSN EN 13748-2
ČSN EN 13755
ČSN EN 1380
ČSN EN 1381
ČSN EN 1382
ČSN EN 13820
ČSN EN 1383
ČSN EN 13869
ČSN EN 13872
ČSN EN 1388-1
ČSN EN 1388-2
ČSN EN 13888-2
ČSN EN 13892-2
ČSN EN 13892-3
ČSN EN 13892-4
ČSN EN 13892-6
ČSN EN 13892-8
ČSN EN 13892-9
ČSN EN 13893
ČSN EN 13963 ed. 2
ČSN EN 13964 ed. 2
ČSN EN 14064-1 ed. 2
ČSN EN 14080
ČSN EN 14157
ČSN EN 14195 ed. 2
ČSN EN 14223
ČSN EN 14231
ČSN EN 1427
ČSN EN 14297
ČSN EN 14303
ČSN EN 14315-1, C.3
ČSN EN 14315-1, C.4
ČSN EN 14315-1, C.5
ČSN EN 1433
ČSN EN 1433 čl. 9.1
ČSN EN 14342
ČSN EN 1436
ČSN EN 14374
ČSN EN 14428+A1
ČSN EN 14509 ed. 2
ČSN EN 14527
ČSN EN 14528+A1
ČSN EN 1457-1
ČSN EN 1457-2
ČSN EN 14592+A1
ČSN EN 14608
ČSN EN 14609
ČSN EN 14617-1
ČSN EN 14617-11
ČSN EN 14617-12
ČSN EN 14617-16
ČSN EN 14617-2
ČSN EN 14617-5
ČSN EN 14617-6
ČSN EN 14617-9
ČSN EN 14630
ČSN EN 1465
ČSN EN 14651+A1
ČSN EN 14688+A1
ČSN EN 14721+A1
ČSN EN 14782
ČSN EN 14845-1
ČSN EN 14845-2
ČSN EN 14891 ed. 2
ČSN EN 15037-1
ČSN EN 15037-2+A1
ČSN EN 15037-3+A1
ČSN EN 15101-1+A1
ČSN EN 15167-1
ČSN EN 1541
ČSN EN 1542
ČSN EN 15435
ČSN EN 15632-4
ČSN EN 15737
ČSN EN 15820
ČSN EN 1602:2013
ČSN EN 1603
ČSN EN 1604
ČSN EN 1605
ČSN EN 1606:2013
ČSN EN 1607
ČSN EN 1608
ČSN EN 1609:2013
ČSN EN 16165
ČSN EN 16382
ČSN EN 16383
ČSN EN 16516+A1
ČSN EN 17322
ČSN EN 17333-1
ČSN EN 1744-1+A1
ČSN EN 17503
ČSN EN 1766 ed. 2
ČSN EN 1770
ČSN EN 1783
ČSN EN 1793-1
ČSN EN 1793-2
ČSN EN 1793-4
ČSN EN 1793-5
ČSN EN 1793-6
ČSN EN 1794-1
ČSN EN 1794-1:2004
ČSN EN 1794-2
ČSN EN 1794-2:2004
ČSN EN 1811+A1:2016
ČSN EN 1847
ČSN EN 1848-1
ČSN EN 1848-2
ČSN EN 1849-1
ČSN EN 1849-2
ČSN EN 1850-1
ČSN EN 1850-2
ČSN EN 1873+A1
ČSN EN 1873:2006
ČSN EN 1881
ČSN EN 1916
ČSN EN 1917
ČSN EN 1925
ČSN EN 1926
ČSN EN 1928
ČSN EN 1931
ČSN EN 1936
ČSN EN 1946-2
ČSN EN 196-1
ČSN EN 196-10
ČSN EN 196-2
ČSN EN 196-3
ČSN EN 196-5
ČSN EN 196-6
ČSN EN 196-7
ČSN EN 196-8
ČSN EN 1993-1-3
ČSN EN 253+A1
ČSN EN 26891
ČSN EN 310
ČSN EN 317
ČSN EN 319
ČSN EN 321
ČSN EN 322
ČSN EN 323
ČSN EN 324-1
ČSN EN 324-2
ČSN EN 325
ČSN EN 3339
ČSN EN 380
ČSN EN 384+A2
ČSN EN 40-3-2
ČSN EN 408+A1
ČSN EN 409
ČSN EN 413-2
ČSN EN 445
ČSN EN 450-1
ČSN EN 451-1
ČSN EN 451-2
ČSN EN 459-2
ČSN EN 477
ČSN EN 480-10
ČSN EN 480-11
ČSN EN 480-12
ČSN EN 480-2
ČSN EN 480-4
ČSN EN 480-5
ČSN EN 480-8
ČSN EN 491
ČSN EN 492+A2
ČSN EN 494+A1
ČSN EN 50242:1999
ČSN EN 506
ČSN EN 508-1
ČSN EN 508-2
ČSN EN 508-3+A1
ČSN EN 514
ČSN EN 520+A1
ČSN EN 538
ČSN EN 539-1
ČSN EN 539-2
ČSN EN 544 ed. 2
ČSN EN 594
ČSN EN 595
ČSN EN 596
ČSN EN 639
ČSN EN 640
ČSN EN 645
ČSN EN 678
ČSN EN 679
ČSN EN 680
ČSN EN 71-1+A1
ČSN EN 71-10
ČSN EN 71-11
ČSN EN 71-16
ČSN EN 71-18
ČSN EN 71-19
ČSN EN 71-2
ČSN EN 71-3+A2
ČSN EN 71-4 ed. 2
ČSN EN 71-7+A3
ČSN EN 71-8
ČSN EN 71-9+A1:2007
ČSN EN 717-1
ČSN EN 717-3
ČSN EN 771-1+A1
ČSN EN 772-1+A1
ČSN EN 772-10
ČSN EN 772-11
ČSN EN 772-13
ČSN EN 772-14
ČSN EN 772-16
ČSN EN 772-18
ČSN EN 772-19
ČSN EN 772-2
ČSN EN 772-20
ČSN EN 772-21
ČSN EN 772-3
ČSN EN 772-5 ed. 2
ČSN EN 772-6
ČSN EN 772-7
ČSN EN 772-9
ČSN EN 789
ČSN EN 822:2013
ČSN EN 823:2013
ČSN EN 824
ČSN EN 825:2013
ČSN EN 826:2013
ČSN EN 845-2
ČSN EN 845-3+A1
ČSN EN 846-11
ČSN EN 846-5
ČSN EN 846-6
ČSN EN 846-9 ed. 2
ČSN EN 927-6
ČSN EN 932-1
ČSN EN 933-1
ČSN EN 933-10
ČSN EN 933-11
ČSN EN 933-3
ČSN EN 933-4
ČSN EN 933-5
ČSN EN 933-8+A1
ČSN EN 933-9
ČSN EN 934-5
ČSN EN 947
ČSN EN 948
ČSN EN 949
ČSN EN 950
ČSN EN 990
ČSN EN 991
ČSN EN 993-1
ČSN EN 993-10
ČSN EN 993-11
ČSN EN 993-12
ČSN EN 993-15
ČSN EN 993-16
ČSN EN 993-18
ČSN EN 993-19
ČSN EN 993-2
ČSN EN 993-3
ČSN EN 993-4
ČSN EN 993-5
ČSN EN 993-6
ČSN EN 993-7
ČSN EN 993-9
ČSN EN 997
ČSN EN IEC 62115 ed. 2
ČSN EN ISO 10058-3
ČSN EN ISO 10077-1
ČSN EN ISO 10077-2
ČSN EN ISO 10111
ČSN EN ISO 10140-2
ČSN EN ISO 10140-3
ČSN EN ISO 10140-4
ČSN EN ISO 10211
ČSN EN ISO 10319
ČSN EN ISO 10545-10
ČSN EN ISO 10545-11
ČSN EN ISO 10545-12
ČSN EN ISO 10545-13
ČSN EN ISO 10545-14
ČSN EN ISO 10545-15
ČSN EN ISO 10545-2
ČSN EN ISO 10545-3
ČSN EN ISO 10545-4
ČSN EN ISO 10545-5
ČSN EN ISO 10545-6
ČSN EN ISO 10545-7
ČSN EN ISO 10545-8
ČSN EN ISO 10545-9
ČSN EN ISO 10563
ČSN EN ISO 10590
ČSN EN ISO 10591
ČSN EN ISO 10666
ČSN EN ISO 11269-1
ČSN EN ISO 11432
ČSN EN ISO 1172
ČSN EN ISO 1182
ČSN EN ISO 11925-2
ČSN EN ISO 12017
ČSN EN ISO 12020
ČSN EN ISO 12567-1
ČSN EN ISO 12567-2
ČSN EN ISO 12570
ČSN EN ISO 12572
ČSN EN ISO 12628
ČSN EN ISO 12944-9
ČSN EN ISO 14184-1
ČSN EN ISO 14389
ČSN EN ISO 1461
ČSN EN ISO 1463
ČSN EN ISO 15148
ČSN EN ISO 15318
ČSN EN ISO 15586
ČSN EN ISO 15630-1
ČSN EN ISO 15630-2
ČSN EN ISO 15630-3
ČSN EN ISO 16000-10
ČSN EN ISO 16032
ČSN EN ISO 16282
ČSN EN ISO 16283-1
ČSN EN ISO 16283-2
ČSN EN ISO 16283-3
ČSN EN ISO 16534
ČSN EN ISO 16535
ČSN EN ISO 16536
ČSN EN ISO 1716
ČSN EN ISO 17178
ČSN EN ISO 175
ČSN EN ISO 17660-1
ČSN EN ISO 17660-2
ČSN EN ISO 178
ČSN EN ISO 17892-1
ČSN EN ISO 17892-3
ČSN EN ISO 17892-4
ČSN EN ISO 18097
ČSN EN ISO 18098
ČSN EN ISO 18393-1
ČSN EN ISO 18393-1:2012
ČSN EN ISO 1893
ČSN EN ISO 1923
ČSN EN ISO 1927-1
ČSN EN ISO 1927-3
ČSN EN ISO 1927-4
ČSN EN ISO 1927-6
ČSN EN ISO 1927-7
ČSN EN ISO 1927-8
ČSN EN ISO 20565-3
ČSN EN ISO 21068-2
ČSN EN ISO 21068-3
ČSN EN ISO 21079-3
ČSN EN ISO 21587-2
ČSN EN ISO 21587-3
ČSN EN ISO 2178
ČSN EN ISO 22631
ČSN EN ISO 22632
ČSN EN ISO 22633
ČSN EN ISO 22635
ČSN EN ISO 2360
ČSN EN ISO 2409
ČSN EN ISO 2808
ČSN EN ISO 2812-1
ČSN EN ISO 2812-2
ČSN EN ISO 2812-4
ČSN EN ISO 2813
ČSN EN ISO 29465
ČSN EN ISO 29466
ČSN EN ISO 29468
ČSN EN ISO 29469
ČSN EN ISO 29470
ČSN EN ISO 29767
ČSN EN ISO 29768
ČSN EN ISO 29770
ČSN EN ISO 3071
ČSN EN ISO 3251
ČSN EN ISO 3382-2
ČSN EN ISO 3386-1
ČSN EN ISO 354
ČSN EN ISO 3882
ČSN EN ISO 4624
ČSN EN ISO 4628-2
ČSN EN ISO 4628-3
ČSN EN ISO 4628-4
ČSN EN ISO 4628-5
ČSN EN ISO 4628-8
ČSN EN ISO 4892-3
ČSN EN ISO 5173
ČSN EN ISO 527-1
ČSN EN ISO 527-2
ČSN EN ISO 527-3
ČSN EN ISO 527-4
ČSN EN ISO 54321
ČSN EN ISO 5470-1
ČSN EN ISO 5961
ČSN EN ISO 604
ČSN EN ISO 62
ČSN EN ISO 6270-1
ČSN EN ISO 6272-1
ČSN EN ISO 6341
ČSN EN ISO 6507-1
ČSN EN ISO 6892-1
ČSN EN ISO 6946
ČSN EN ISO 7389
ČSN EN ISO 7390
ČSN EN ISO 7438
ČSN EN ISO 7783
ČSN EN ISO 787-9
ČSN EN ISO 8339
ČSN EN ISO 8340
ČSN EN ISO 845
ČSN EN ISO 868
ČSN EN ISO 8692
ČSN EN ISO 8894-1
ČSN EN ISO 8895
ČSN EN ISO 8990
ČSN EN ISO 9015-1
ČSN EN ISO 9046
ČSN EN ISO 9053-1
ČSN EN ISO 9227
ČSN EN ISO 9612
ČSN EN ISO 9972
ČSN EN ISO 9994
ČSN EN14315-1
ČSN ISO 10523
ČSN ISO 10847
ČSN ISO 11465
ČSN ISO 12678-1
ČSN ISO 12678-2
ČSN ISO 1920-10
ČSN ISO 1996-1
ČSN ISO 1996-2
ČSN ISO 2361
ČSN ISO 6439
ČSN ISO 6784:1993
ČSN ISO 7801
ČSN ISO 8288
ČSN ISO 9052-1
ČSN P CEN/TR 196-4
ČSN P CEN/TS 15418, postup A
ČSN P CEN/TS 16165
č. 10/2011