🇨🇿 QUALIFORM, a.s. PL
Construction
QUALIFORM, a.s. is a laboratory accredited by ČIA under number 1008 (Brno, Czech Republic). Its accreditation scope covers 293 test methods in the following areas: Construction. Test objects include: Hardened concrete, Aggregates, Fresh concrete, Soils.
At a glance
- Accreditation number: ČIA 1008
- Methods in scope: 293
- Types of test objects: 52
- City: Brno, Czech Republic
- Valid until: 05-06-2030
- Accreditation number
- 1008
- Accreditation body
- ČIA
- Address
- Mlaty 672/8, Bosonohy, 642 00 Brno
- City
- Brno, Czech Republic
- Division
- Laboratorium Badawcze
- Valid until
- 05-06-2030
What this laboratory tests (52)
- Hardened concrete — 38 methods
- Aggregates — 29 methods
- Fresh concrete — 23 methods
- Soils — 21 methods
- Soils and loose fill materials — 16 methods
- Asphalt mixture — 15 methods
- Concrete and reinforced concrete structures — 10 methods
- Concrete base layers of bridge decks with an epoxy coating or insulating layer — 8 methods
- Fresh mortar — 6 methods
- Geotextiles — 6 methods
- Hydraulically bound mixtures — 6 methods
- Masonry mortars — 5 methods
- Repair mortars — 5 methods
- Adhesives — 4 methods
- Anti-skid safety treatments (BPÚ) of road surfaces — 4 methods
- and 37 more
Laboratory sections (4)
- Brno site — 115 methods
- Olomouc site — 67 methods
- Hradec Králové site — 58 methods
- Prague site — 53 methods
Laboratory locations
- pracownia Brno — Mlaty 672/8, Bosonohy
- pracownia Hradec Králové — Piletická 71/20a
- pracownia Ołomuniec — Pavelkova 598/11
- pracownia Praga — Prosecká 412/74
Certificate information
- Certificate date
- 05.06.2025
Accreditation scope — test methods (293)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Brno site | |||||
| 1 | Hardened concrete | Determination of density Regulated area: Tests |
ČSN EN 12390-7, mimo čl. 6.5 | ||
| 2 | Hardened concrete | Determination of moisture content and water absorption Regulated area: Tests |
IZP č. 03/03 (ČSN 73 1316:1989, oddíly 2, 4) | ||
| 3 | Hardened concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 12390-3; ČSN EN 12504-1, mimo kap. 6, 7 | ||
| 4 | Hardened concrete | Determination of flexural strength Regulated area: Tests |
ČSN EN 12390-5 | ||
| 5 | Hardened concrete | Determination of tensile splitting strength Regulated area: Tests |
ČSN EN 12390-6 | ||
| 6 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN EN 12390-8 | ||
| 7 | Hardened concrete | Determination of frost resistance Regulated area: Tests |
ČSN 73 1322 | ||
| 8 | Cement concrete | Determination of surface resistance to water and chemical de-icing agents (CHRL) Regulated area: Tests |
ČSN 73 1326, kap. A, čl. 13 až 23, kap. C, čl. 30 až 44 | ||
| 9 | Cement concrete pavement | Determination of layer thickness on a core Regulated area: Tests |
ČSN EN 13863-3 | ||
| 10 | Hardened concrete | Determination of rebound hardness with Schmidt hammers Regulated area: Tests |
ČSN 73 1373; ČSN EN 12504-2 | ||
| 11 | Hardened concrete | Determination of void content Regulated area: Tests |
ČSN 73 6124-2, příl. A | ||
| 12 | Hardened concrete | Determination of static modulus of elasticity Regulated area: Tests |
ČSN ISO 1920-10 | ||
| 13 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2 | ||
| 14 | Fresh concrete | Flow table test Regulated area: Tests |
ČSN EN 12350-5 | ||
| 15 | Fresh concrete | Determination of air content – pressure gauge method Regulated area: Tests |
ČSN EN 12350-7, mimo kap. 5 | ||
| 16 | Fresh concrete | Determination of density Regulated area: Tests |
ČSN EN 12350-6 | ||
| 17 | Fresh concrete | Determination of degree of compactability Regulated area: Tests |
ČSN EN 12350-4 | ||
| 18 | Fresh concrete | Slump-flow test Regulated area: Tests |
ČSN EN 12350-8 | ||
| 19 | Renders and claddings | Adhesion test of surface finishes of building structures Regulated area: Tests |
ČSN 73 2577 | ||
| 20 | Concretes, anchoring and insulating layers | Determination of layer adhesion and tensile strength Regulated area: Tests |
ČSN 73 6242, příl. B | ||
| 21 | Mortars | Determination of bond strength by pull-off Regulated area: Tests |
ČSN EN 1542, kap. 7 | ||
| 22 | Paints and varnishes | Determination of adhesion by pull-off Regulated area: Tests |
ČSN EN ISO 4624 | ||
| 23 | Anti-skid safety treatments (BPÚ) of road surfaces | Determination of tensile adhesion Regulated area: Tests |
TP 213, příl. A | ||
| 24 | Precast concrete building units | Dimensional accuracy check Regulated area: Tests |
ČSN 73 0212-5 | ||
| 25 | Concrete base layers of bridge decks with an epoxy coating or insulating layer | Layer impermeability test Regulated area: Tests |
ČSN 73 6242, příl. D | ||
| 26 | Concrete base layers of bridge decks with an epoxy coating or insulating layer | Layer impermeability test by electrical voltage – spark test Regulated area: Tests |
ČSN 73 6242, příl. E | ||
| 27 | Concrete paving blocks | Determination of dimensions Regulated area: Tests |
ČSN EN 1338, příl. C | ||
| 28 | Concrete paving blocks | Determination of resistance to chemical de-icing agents (CHRL) Regulated area: Tests |
ČSN EN 1338, příl. D | ||
| 29 | Concrete paving blocks | Determination of total water absorption Regulated area: Tests |
ČSN EN 1338, příl. E | ||
| 30 | Concrete paving blocks | Measurement of tensile splitting strength Regulated area: Tests |
ČSN EN 1338, příl. F | ||
| 31 | Concrete kerb units | Determination of dimensions Regulated area: Tests |
ČSN EN 1340, příl. C | ||
| 32 | Concrete kerb units | Determination of resistance to chemical de-icing agents (CHRL) Regulated area: Tests |
ČSN EN 1340, příl. D | ||
| 33 | Concrete kerb units | Determination of total water absorption Regulated area: Tests |
ČSN EN 1340, příl. E | ||
| 34 | Concrete kerb units | Measurement of bending strength Regulated area: Tests |
ČSN EN 1340, příl. F | ||
| 35 | Concrete and reinforced concrete structures | Pile integrity measurement – PIT method Regulated area: Tests |
IZP č. 01/11 (Manuál k zařízení Pile echo tester) | ||
| 36 | Concrete and reinforced concrete structures | Strength measurement Regulated area: Tests |
ČSN 73 2011; ČSN EN 13791 | ||
| 37 | Hardened concrete | Determination of air void characteristics Regulated area: Tests |
ČSN EN 480-11 | ||
| 38 | Cement | Determination of consistency and setting time Regulated area: Tests |
ČSN EN 196-3, kap. 1 až 6; ČSN EN 13409 | ||
| 39 | Cement | Determination of soundness Regulated area: Tests |
ČSN EN 196-3 kap. 7 | ||
| 40 | Cement, fly ash and mortar | Determination of strength Regulated area: Tests |
ČSN EN 196-1 | ||
| 41 | Clay masonry products | Assessment of appearance and dimensions Regulated area: Tests |
ČSN 72 2602, oddíl II, část A, B; ČSN EN 772-16 | ||
| 42 | Clay masonry products | Determination of mass, density and water absorption Regulated area: Tests |
ČSN 72 2603, kap. II. A, B, C; ČSN EN 772-13 | ||
| 43 | Clay masonry products | Determination of compressive strength Regulated area: Tests |
ČSN 72 2605, kap. V. A; ČSN EN 772-1+A1 | ||
| 44 | Paving flags | Determination of dimensions Regulated area: Tests |
ČSN EN 1339, příl. C | ||
| 45 | Paving flags | Determination of resistance to chemical de-icing agents (CHRL) Regulated area: Tests |
ČSN EN 1339, příl. D | ||
| 46 | Paving flags | Determination of water absorption Regulated area: Tests |
ČSN EN 1339, příl. E | ||
| 47 | Paving flags | Measurement of bending strength Regulated area: Tests |
ČSN EN 1339, příl. F | ||
| 48 | Working environment | Noise measurement Regulated area: Tests |
ČSN ISO 1999; ČSN EN ISO 9612; Věstník MZ ČR, Ročník 2013, Částka 4 | ||
| 49 | Non-working environment | Noise measurement Regulated area: Tests |
ČSN ISO 1996-1; ČSN ISO 1996-2; Věstník MZ ČR, Ročník 2023, Částka 14, část 3 | ||
| 50 | Working and non-working environment | Measurement of electric lighting Regulated area: Tests |
ČSN 36 0011-1; ČSN 36 0011-3 | ||
| 51 | Aggregates | Determination of particle density and water absorption – pyknometer method Regulated area: Tests |
ČSN EN 1097-6, kap. 8, 9, příl. A, kap. A.4, příl. C | ||
| 52 | Aggregates | Determination of particle density and water absorption – wire basket method Regulated area: Tests |
IZP č. 01/15 (ČSN EN 1097-6:2014); ČSN EN 1097-6, kap. 7, příl. B | ||
| 53 | Aggregates | Determination of the percentage of crushed particles Regulated area: Tests |
ČSN EN 933-5 | ||
| 54 | Aggregates | Determination of loose bulk density Regulated area: Tests |
ČSN EN 1097-3 | ||
| 55 | Aggregates | Determination of particle shape – shape index Regulated area: Tests |
ČSN EN 933-4 | ||
| 56 | Aggregates | Determination of water content by drying in a ventilated oven Regulated area: Tests |
ČSN EN 1097-5 | ||
| 57 | Aggregates | Determination of particle size distribution – sieving method Regulated area: Tests |
ČSN EN 933-1 | ||
| 58 | Masonry mortars | Determination of flexural strength Regulated area: Tests |
ČSN EN 1015-11 | ||
| 59 | Repair mortars | Determination of flexural strength Regulated area: Tests |
ČSN EN 12190 | ||
| 60 | Grouts for tiles | Determination of flexural strength Regulated area: Tests |
ČSN EN 13888-2, čl. 9.1 | ||
| 61 | Screed materials | Determination of flexural strength Regulated area: Tests |
ČSN EN 13892-2 | ||
| 62 | Masonry mortars | Determination of compressive strength Regulated area: Tests |
ČSN EN 1015-11 | ||
| 63 | Repair mortars | Determination of compressive strength Regulated area: Tests |
ČSN EN 12190 | ||
| 64 | Grouts for tiles | Determination of compressive strength Regulated area: Tests |
ČSN EN 13888-2, čl. 9.1 | ||
| 65 | Screed materials | Determination of compressive strength Regulated area: Tests |
ČSN EN 13892-2 | ||
| 66 | Hardened mortar | Determination of adhesive strength Regulated area: Tests |
ČSN EN 1015-12 | ||
| 67 | Masonry mortar | Determination of frost resistance Regulated area: Tests |
ČSN 72 2452 | ||
| 68 | Dry mortar | Determination of particle size distribution Regulated area: Tests |
ČSN EN 1015-1 | ||
| 69 | Fresh mortar | Determination of consistence by plunger penetration Regulated area: Tests |
ČSN EN 1015-4 | ||
| 70 | Fresh mortar | Determination of consistence by flow table Regulated area: Tests |
ČSN EN 1015-3 | ||
| 71 | Fresh mortar | Determination of bulk density Regulated area: Tests |
ČSN EN 1015-6 | ||
| 72 | Fresh mortar | Determination of air content Regulated area: Tests |
ČSN EN 1015-7 | ||
| 73 | Fresh mortar | Determination of workable life and correction time Regulated area: Tests |
ČSN EN 1015-9 | ||
| 74 | Fresh mortar | Determination of setting time Regulated area: Tests |
ČSN EN 13294 | ||
| 75 | Grout | Determination of fluidity Regulated area: Tests |
ČSN EN 445, čl. 4.3 | ||
| 76 | Grout | Bleeding test Regulated area: Tests |
IZP č. 2/10 (ČSN EN 445:1998, čl. 3.3 až 3.4.2.3, čl. 3.5 až 3.5.1.4) | ||
| 77 | Grout | Volume change test Regulated area: Tests |
IZP č. 2/10 (ČSN EN 445:1998, čl. 3.3 až 3.4.2.3, čl. 3.5 až 3.5.1.4) | ||
| 78 | Adhesives | Determination of shear adhesion strength Regulated area: Tests |
ČSN EN 12004-2, čl. 8.4 | ||
| 79 | Adhesives | Determination of tensile adhesion strength Regulated area: Tests |
ČSN EN 12004-2, čl. 8.3 | ||
| 80 | Adhesives | Determination of open time Regulated area: Tests |
ČSN EN 12004-2, čl. 8.1 | ||
| 81 | Adhesives | Determination of slip Regulated area: Tests |
ČSN EN 12004-2, čl. 8.2 | ||
| 82 | Floor screed compounds | Determination of volume changes Regulated area: Tests |
ČSN EN 13872 | ||
| 83 | Grouts | Determination of shrinkage Regulated area: Tests |
ČSN EN 13888-2, čl. 9.3 | ||
| 84 | Coatings on structures | Measurement of thickness Regulated area: Tests |
ČSN EN ISO 2808, čl. 5.4.5, 5.5.5, 5.5.7 | ||
| 85 | Finished pavement layers | Determination of degree of compaction by the radiometric method Regulated area: Tests |
ČSN 72 1006, příl. F; ČSN 73 6160, čl. 7.2, metoda b | ||
| 86 | Surface of road pavements | Determination of macrotexture Regulated area: Tests |
ČSN EN 13036-1 | ||
| 87 | Surface of pavement courses and road base layers | Measurement of longitudinal and transverse unevenness with a straightedge and planograph Regulated area: Tests |
ČSN 73 6175, kap. 8, 9 | ||
| 88 | Joints of cement concrete pavements | Determination of the position of dowels and tie bars Regulated area: Tests |
IZP č. 01/18 (ČSN 73 6123-1; TP 233; Manuál k zařízení Inspekční georadarový systém) | ||
| 89 | Fly ash | Determination of activity index Regulated area: Tests |
ČSN 72 2071, čl. 11.8; ČSN EN 196-1; ČSN EN 450-1; ČSN 73 6124-1, příl. B | ||
| 90 | Fly ash | Determination of soundness Regulated area: Tests |
ČSN EN 450-1; ČSN EN 196-3 | ||
| 91 | Fly ash | Determination of setting time Regulated area: Tests |
ČSN 72 2071, čl. 11.9; ČSN EN 196-3; ČSN EN 450-1; | ||
| 92 | Admixtures | Determination of setting time Regulated area: Tests |
ČSN EN 480-2 | ||
| 93 | Admixtures | Determination of capillary absorption Regulated area: Tests |
ČSN EN 480-5 | ||
| 94 | Admixtures | Determination of bleeding of concrete Regulated area: Tests |
ČSN EN 480-4 | ||
| 95 | Bound pavement layers | Determination of thickness Regulated area: Tests |
IZP č. 02/18 (ASTM D 4748-10; TP 233; Manuál k zařízení Inspekční georadarový systém) | ||
| 96 | Hydraulically bound mixtures | Determination of resistance to frost and water Regulated area: Tests |
ČSN 73 6124-1, příl. A | ||
| 97 | Hydraulically bound mixtures | Determination of compressive strength Regulated area: Tests |
ČSN EN 13286-41 | ||
| 98 | Building structures | Determination of airborne sound insulation Regulated area: Tests |
ČSN EN ISO 717-1; ČSN EN ISO 16283-1; ČSN EN ISO 16283-3 | ||
| 99 | Building structures | Determination of impact sound insulation Regulated area: Tests |
ČSN EN ISO 717-2; ČSN EN ISO 16283-2 | ||
| 100 | Building structures | Measurement of reverberation time Regulated area: Tests |
ČSN EN ISO 3382-2 | ||
| 101 | Building materials and products | Determination of moisture content by drying at elevated temperature Regulated area: Tests |
ČSN EN ISO 12570 | ||
| 102 | Soils | Determination of the bearing ratio (CBR, IBI) Regulated area: Tests |
ČSN EN 13286-47 | ||
| 103 | Soils | Determination of particle density – pycnometer method Regulated area: Tests |
ČSN EN ISO 17892-3, mimo čl. 5.2 | ||
| 104 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, mimo čl. 5.4 | ||
| 105 | Soils | Determination of consistency limits Regulated area: Tests |
ČSN EN ISO 17892-12, mimo čl. 4.3, 5.4, 6.3 | ||
| 106 | Soils | Determination of water content Regulated area: Tests |
ČSN EN ISO 17892-1 | ||
| 107 | Soils and loose fill materials | Determination of compactability – Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3, 7.6 | ||
| 108 | Soils and loose fill materials | Static plate load test Regulated area: Tests |
ČSN 72 1006, příl. A, B, D; ČSN 73 6190 | ||
| 109 | Soils and loose fill materials | Dynamic load test with a light dynamic plate Regulated area: Tests |
ČSN 73 6192, čl. 3.1.3, 4.4, 5.3, 5.4, 6.2, 6.3 | ||
| 110 | Soils and loose fill materials | Determination of bulk density Regulated area: Tests |
ČSN 72 1010, kap. I, II, III, čl. A, D-1 | ||
| 111 | Non-cohesive soils, aggregates | Determination of relative density Regulated area: Tests |
ČSN 72 1018 | ||
| 112 | Asphalt mixture | Sampling of asphalt mixture Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1 až 4.4, 4.6, 4.7 | ||
| 113 | Hardened concrete | Sampling of hardened concrete (cores from the structure) Regulated area: Sampling |
ČSN EN 12504-1, kap. 6, 7 | ||
| 114 | Fresh concrete | Sampling of fresh concrete Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 115 | Aggregates | Sampling of aggregates and reduction of samples Regulated area: Sampling |
ČSN EN 932-1, mimo čl. 8.2, 8.3; ČSN EN 932-2 | ||
| Hradec Králové site | |||||
| 116 | Asphalt mixture | Temperature measurement Regulated area: Tests |
ČSN EN 12697-13 | ||
| 117 | Hardened concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 12390-3; ČSN EN 12504-1, mimo kap. 6, 7 | ||
| 118 | Hardened concrete | Determination of density Regulated area: Tests |
ČSN EN 12390-7, mimo čl. 6.5 | ||
| 119 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN EN 12390-8 | ||
| 120 | Cement concrete | Determination of surface resistance to water and chemical de-icing agents (CHRL) Regulated area: Tests |
ČSN 73 1326, kap. A, čl. 13 až 23 | ||
| 121 | Hardened concrete | Determination of rebound hardness with Schmidt hammers Regulated area: Tests |
ČSN 73 1373; ČSN EN 12 504-2 | ||
| 122 | Hardened concrete | Determination of static modulus of elasticity Regulated area: Tests |
ČSN ISO 1920-10 | ||
| 123 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2 | ||
| 124 | Fresh concrete | Slump-flow test Regulated area: Tests |
ČSN EN 12350-8 | ||
| 125 | Fresh concrete | Determination of air content – pressure gauge method Regulated area: Tests |
ČSN EN 12350-7, mimo kap. 5 | ||
| 126 | Fresh concrete | Determination of density Regulated area: Tests |
ČSN EN 12350-6 | ||
| 127 | Renders and claddings | Adhesion test of surface finishes of building structures Regulated area: Tests |
ČSN 73 2577 | ||
| 128 | Concretes, anchoring and insulating layers | Determination of layer adhesion and tensile strength Regulated area: Tests |
ČSN 73 6242, příl. B | ||
| 129 | Mortars | Determination of bond strength by pull-off Regulated area: Tests |
ČSN EN 1542, kap. 7 | ||
| 130 | Paints and varnishes | Determination of adhesion by pull-off Regulated area: Tests |
ČSN EN ISO 4624 | ||
| 131 | Anti-skid safety treatments (BPÚ) of road surfaces | Determination of tensile adhesion Regulated area: Tests |
TP 213, příl. A | ||
| 132 | Concrete base layers of bridge decks with an epoxy coating or insulating layer | Layer impermeability test Regulated area: Tests |
ČSN 73 6242, příl. D | ||
| 133 | Concrete base layers of bridge decks with an epoxy coating or insulating layer | Layer impermeability test by electrical voltage – spark test Regulated area: Tests |
ČSN 73 6242, příl. E | ||
| 134 | Concrete and reinforced concrete structures | Pile integrity measurement – PIT method Regulated area: Tests |
IZP č. 01/11 (Manuál k zařízení Pile echo tester) | ||
| 135 | Concrete and reinforced concrete structures | Pile integrity measurement – CHA method Regulated area: Tests |
IZP č. 01/16 (Manuál k zařízení CHA) | ||
| 136 | Geotextiles | Determination of water permeability characteristics normal to the plane, without load Regulated area: Tests |
ČSN EN ISO 11058 | ||
| 137 | Geotextiles | Static puncture test Regulated area: Tests |
ČSN EN ISO 12236 | ||
| 138 | Geotextiles | Dynamic perforation test Regulated area: Tests |
ČSN EN ISO 13433 | ||
| 139 | Geotextiles | Determination of thickness Regulated area: Tests |
ČSN EN ISO 9863-1 | ||
| 140 | Geotextiles | Determination of tensile strength and elongation Regulated area: Tests |
ČSN EN ISO 10319 | ||
| 141 | Geotextiles and geotextile-related products | Determination of the characteristic opening size Regulated area: Tests |
ČSN EN ISO 12956 | ||
| 142 | Geotextiles and geotextile-related products | Determination of mass per unit area Regulated area: Tests |
ČSN EN ISO 9864 | ||
| 143 | Aggregates | Determination of particle density and water absorption – pyknometer method Regulated area: Tests |
ČSN EN 1097-6, kap. 8, 9, příl. A, kap. A.4, příl. C | ||
| 144 | Aggregates | Determination of particle density and water absorption – wire basket method Regulated area: Tests |
ČSN EN 1097-6, kap. 7, příl. B; IZP č. 01/15 (ČSN EN 1097-6:2014) | ||
| 145 | Aggregates | Determination of water content by drying in a ventilated oven Regulated area: Tests |
ČSN EN 1097-5 | ||
| 146 | Aggregates | Determination of particle shape – shape index Regulated area: Tests |
ČSN EN 933-4 | ||
| 147 | Aggregates | Determination of particle size distribution – sieving method Regulated area: Tests |
ČSN EN 933-1 | ||
| 148 | Aggregates | Sand equivalent test Regulated area: Tests |
ČSN EN 933-8+A1 | ||
| 149 | Finished pavement layers | Determination of degree of compaction by the radiometric method Regulated area: Tests |
ČSN 72 1006, příl. F; ČSN 73 6160, čl. 7.2, metoda b | ||
| 150 | Surface of road pavements | Determination of macrotexture Regulated area: Tests |
ČSN EN 13036-1 | ||
| 151 | Surface of pavement courses and road base layers | Measurement of longitudinal and transverse unevenness with a straightedge and planograph Regulated area: Tests |
ČSN 73 6175, kap. 8, 9 | ||
| 152 | Building materials and products | Determination of moisture content by drying at elevated temperature Regulated area: Tests |
ČSN EN ISO 12570 | ||
| 153 | Soils | Determination of the bearing ratio (CBR, IBI) Regulated area: Tests |
ČSN EN 13286-47 | ||
| 154 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, mimo čl. 5.4 | ||
| 155 | Soils | Determination of particle density – pycnometer method Regulated area: Tests |
ČSN EN ISO 17892-3, mimo čl. 5.2 | ||
| 156 | Soils | Determination of consistency limits Regulated area: Tests |
ČSN EN ISO 17892-12, mimo čl. 4.3, 5.4, 6.3 | ||
| 157 | Soils | Determination of water content Regulated area: Tests |
ČSN EN ISO 17892-1 | ||
| 158 | Soils and loose fill materials | Determination of compactability – Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3, 7.6 | ||
| 159 | Soils and loose fill materials | Static plate load test Regulated area: Tests |
ČSN 72 1006, příl. A, B, D; ČSN 73 6190 | ||
| 160 | Soils and loose fill materials | Dynamic load test with a light dynamic plate Regulated area: Tests |
ČSN 73 6192, čl. 3.1.3, 4.4, 5.3, 5.4, 6.2, 6.3 | ||
| 161 | Soils and loose fill materials | Determination of bulk density Regulated area: Tests |
ČSN 72 1010, kap. I, II, III čl. A, D-1 | ||
| 162 | Non-cohesive soils, aggregates | Determination of relative density Regulated area: Tests |
ČSN 72 1018 | ||
| 163 | Concrete and reinforced concrete structures | Determination of concrete cover of steel reinforcement Regulated area: Tests |
IZP č. 01/21 (ČSN 73 2011, příl. A) | ||
| 164 | Masonry mortars | Determination of flexural strength Regulated area: Tests |
ČSN EN 1015-11 | ||
| 165 | Repair mortars | Determination of flexural strength Regulated area: Tests |
ČSN EN 12190 | ||
| 166 | Masonry mortars | Determination of compressive strength Regulated area: Tests |
ČSN EN 1015-11 | ||
| 167 | Repair mortars | Determination of compressive strength Regulated area: Tests |
ČSN EN 12190 | ||
| 168 | Hydraulically bound mixtures | Determination of compressive strength Regulated area: Tests |
ČSN EN 13286-41 | ||
| 169 | Asphalt mixture | Sampling of asphalt mixture Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1 až 4.4, 4.6, 4.7 | ||
| 170 | Hardened concrete | Sampling of hardened concrete (cores from the structure) Regulated area: Sampling |
ČSN EN 12504-1, kap. 6, 7 | ||
| 171 | Fresh concrete | Sampling of fresh concrete Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 172 | Aggregates | Sampling of aggregates and reduction of samples Regulated area: Sampling |
ČSN EN 932-1, mimo čl. 8.2, 8.3; ČSN EN 932-2 | ||
| 173 | Geotextiles | Sampling of geotextiles Regulated area: Sampling |
ČSN EN ISO 9862 | ||
| Olomouc site | |||||
| 174 | Asphalt mixture | Determination of thickness Regulated area: Tests |
ČSN EN 12697-36, čl. 6.1 | ||
| 175 | Asphalt mixture | Analysis of soluble binder content Regulated area: Tests |
ČSN EN 12697-1 | ||
| 176 | Asphalt mixture | Determination of particle size distribution Regulated area: Tests |
ČSN EN 12697-2 | ||
| 177 | Asphalt mixture | Determination of bulk density of bituminous specimens, including specimen preparation Regulated area: Tests |
ČSN EN 12697-6; ČSN EN 12697-30 | ||
| 178 | Asphalt mixture | Determination of maximum density Regulated area: Tests |
ČSN EN 12697-5 | ||
| 179 | Asphalt mixture | Determination of void characteristics Regulated area: Tests |
ČSN EN 12697-8 | ||
| 180 | Asphalt mixture | Temperature measurement Regulated area: Tests |
ČSN EN 12697-13 | ||
| 181 | Asphalt mixture | Determination of dimensions of bituminous specimens, including specimen preparation Regulated area: Tests |
ČSN EN 12697-29; ČSN EN 12697-30 | ||
| 182 | Asphalt mixture | Determination of interlayer bond strength Regulated area: Tests |
ČSN 73 6160, čl. 7.3 | ||
| 183 | Hardened concrete | Determination of density Regulated area: Tests |
ČSN EN 12390-7, mimo čl. 6.5 | ||
| 184 | Hardened concrete | Determination of moisture content and water absorption Regulated area: Tests |
IZP č. 03/03 (ČSN 73 1316:1989, oddíly 2, 4) | ||
| 185 | Hardened concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 12390-3; ČSN EN 12504-1, mimo kap. 6, 7 | ||
| 186 | Hardened concrete | Determination of flexural strength Regulated area: Tests |
ČSN EN 12390-5 | ||
| 187 | Hardened concrete | Determination of tensile splitting strength Regulated area: Tests |
ČSN EN 12390-6 | ||
| 188 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN EN 12390-8 | ||
| 189 | Hardened concrete | Determination of frost resistance Regulated area: Tests |
ČSN 73 1322 | ||
| 190 | Hardened concrete | Determination of static modulus of elasticity Regulated area: Tests |
ČSN ISO 1920-10 | ||
| 191 | Cement concrete | Determination of surface resistance to water and chemical de-icing agents (CHRL) Regulated area: Tests |
ČSN 73 1326, kap. A, čl. 13 až 23, kap. C, čl. 30 až 44 | ||
| 192 | Cement concrete pavement | Determination of layer thickness on a core Regulated area: Tests |
ČSN EN 13863-3 | ||
| 193 | Hardened concrete | Determination of rebound hardness with Schmidt hammers Regulated area: Tests |
ČSN 73 1373; ČSN EN 12504-2 | ||
| 194 | Hardened concrete | Determination of void content Regulated area: Tests |
ČSN 73 6124-2, příl. A | ||
| 195 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2 | ||
| 196 | Fresh concrete | Flow table test Regulated area: Tests |
ČSN EN 12350-5 | ||
| 197 | Fresh concrete | Determination of air content – pressure gauge method Regulated area: Tests |
ČSN EN 12350-7, mimo kap. 5 | ||
| 198 | Fresh concrete | Determination of density Regulated area: Tests |
ČSN EN 12350-6 | ||
| 199 | Renders and claddings | Adhesion test of surface finishes of building structures Regulated area: Tests |
ČSN 73 2577 | ||
| 200 | Concretes, anchoring and insulating layers | Determination of layer adhesion and tensile strength Regulated area: Tests |
ČSN 73 6242, příl. B | ||
| 201 | Mortars | Determination of bond strength by pull-off Regulated area: Tests |
ČSN EN 1542, kap. 7 | ||
| 202 | Paints and varnishes | Determination of adhesion by pull-off Regulated area: Tests |
ČSN EN ISO 4624 | ||
| 203 | Anti-skid safety treatments (BPÚ) of road surfaces | Determination of tensile adhesion Regulated area: Tests |
TP 213, příl. A | ||
| 204 | Concrete base layers of bridge decks with an epoxy coating or insulating layer | Layer impermeability test Regulated area: Tests |
ČSN 73 6242, příl. D | ||
| 205 | Concrete base layers of bridge decks with an epoxy coating or insulating layer | Layer impermeability test by electrical voltage – spark test Regulated area: Tests |
ČSN 73 6242, příl. E | ||
| 206 | Concrete and reinforced concrete structures | Pile integrity measurement – PIT method Regulated area: Tests |
IZP č. 01/11 (Manuál k zařízení Pile echo tester) | ||
| 207 | Concrete and reinforced concrete structures | Pile integrity measurement – CHA method Regulated area: Tests |
IZP č. 01/16 (Manuál k zařízení CHA) | ||
| 208 | Concrete and reinforced concrete structures | Determination of strength Regulated area: Tests |
ČSN EN 13791; ČSN 73 2011 | ||
| 209 | Aggregates | Determination of particle density and water absorption – pyknometer method Regulated area: Tests |
ČSN EN 1097-6, kap. 8, 9, příl. A, kap. A.4, příl. C | ||
| 210 | Aggregates | Determination of particle density and water absorption – wire basket method Regulated area: Tests |
ČSN EN 1097-6, kap. 7, příl. B | ||
| 211 | Aggregates | Determination of loose bulk density Regulated area: Tests |
ČSN EN 1097-3 | ||
| 212 | Aggregates | Determination of particle shape – shape index Regulated area: Tests |
ČSN EN 933-4 | ||
| 213 | Aggregates | Determination of water content by drying in a ventilated oven Regulated area: Tests |
ČSN EN 1097-5 | ||
| 214 | Aggregates | Determination of particle size distribution – sieving method Regulated area: Tests |
ČSN EN 933-1 | ||
| 215 | Aggregates | Sand equivalent test Regulated area: Tests |
ČSN EN 933-8+A1 | ||
| 216 | Masonry mortars | Determination of flexural and compressive strength Regulated area: Tests |
ČSN EN 1015-11 | ||
| 217 | Repair mortars | Determination of flexural and compressive strength Regulated area: Tests |
ČSN EN 12190 | ||
| 218 | Grouts for tiles | Determination of flexural and compressive strength Regulated area: Tests |
ČSN EN 13888-2, čl. 9.1 | ||
| 219 | Screed materials | Determination of flexural and compressive strength Regulated area: Tests |
ČSN EN 13892-2 | ||
| 220 | Finished pavement layers | Determination of degree of compaction by the radiometric method Regulated area: Tests |
ČSN 72 1006, příl. F; ČSN 73 6160, čl. 7.2, metoda b | ||
| 221 | Surface of pavement courses and road base layers | Measurement of longitudinal and transverse unevenness with a straightedge and planograph Regulated area: Tests |
ČSN 73 6175, kap. 8, 9 | ||
| 222 | Surface of road pavements | Determination of macrotexture Regulated area: Tests |
ČSN EN 13036-1 | ||
| 223 | Hydraulically bound mixtures | Determination of resistance to frost and water Regulated area: Tests |
ČSN 73 6124-1, příl. A | ||
| 224 | Hydraulically bound mixtures | Determination of compressive strength Regulated area: Tests |
ČSN EN 13286-41 | ||
| 225 | Building materials and products | Determination of moisture content by drying at elevated temperature Regulated area: Tests |
ČSN EN ISO 12570 | ||
| 226 | Soils | Determination of the bearing ratio (CBR, IBI) Regulated area: Tests |
ČSN EN 13286-47 | ||
| 227 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, mimo čl. 5.4 | ||
| 228 | Soils | Determination of particle density – pycnometer method Regulated area: Tests |
ČSN EN ISO 17892-3, mimo čl. 5.2 | ||
| 229 | Soils | Determination of consistency limits Regulated area: Tests |
ČSN EN ISO 17892-12, mimo čl. 4.3, 5.4, 6.3 | ||
| 230 | Soils | Determination of water content Regulated area: Tests |
ČSN EN ISO 17892-1 | ||
| 231 | Soils | Determination of the liquid limit by the Casagrande method Regulated area: Tests |
ČSN EN ISO 17892-12, čl. 4.3 | ||
| 232 | Soils and loose fill materials | Determination of compactability – Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3, 7.6 | ||
| 233 | Soils and loose fill materials | Static plate load test Regulated area: Tests |
ČSN 72 1006, příl. A, B, D; ČSN 73 6190 | ||
| 234 | Soils and loose fill materials | Dynamic load test with a light dynamic plate Regulated area: Tests |
ČSN 73 6192, čl. 3.1.3, 4.4, 5.3, 5.4, 6.2, 6.3 | ||
| 235 | Soils and loose fill materials | Determination of bulk density Regulated area: Tests |
ČSN 72 1010, kap. I, II, III, čl. A, D-1 | ||
| 236 | Non-cohesive soils, aggregates | Determination of relative density Regulated area: Tests |
ČSN 72 1018 | ||
| 237 | Asphalt mixture | Sampling of asphalt mixture Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1 až 4.4, 4.6, 4.7 | ||
| 238 | Hardened concrete | Sampling of hardened concrete (cores from the structure) Regulated area: Sampling |
ČSN EN 12504-1, kap. 6, 7 | ||
| 239 | Fresh concrete | Sampling of fresh concrete Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 240 | Aggregates | Sampling of aggregates and reduction of samples Regulated area: Sampling |
ČSN EN 932-1, mimo čl. 8.2, 8.3; ČSN EN 932-2 | ||
| Prague site | |||||
| 241 | Asphalt mixture | Temperature measurement Regulated area: Tests |
ČSN EN 12697-13 | ||
| 242 | Hardened concrete | Determination of density Regulated area: Tests |
ČSN EN 12390-7, mimo čl. 6.5 | ||
| 243 | Hardened concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 12390-3; ČSN EN 12504-1, mimo kap. 6, 7 | ||
| 244 | Hardened concrete | Determination of flexural strength Regulated area: Tests |
ČSN EN 12390-5 | ||
| 245 | Hardened concrete | Determination of tensile splitting strength Regulated area: Tests |
ČSN EN 12390-6 | ||
| 246 | Hardened concrete | Determination of depth of penetration of water under pressure Regulated area: Tests |
ČSN EN 12390-8 | ||
| 247 | Cement concrete | Determination of surface resistance to water and chemical de-icing agents (CHRL) Regulated area: Tests |
ČSN 73 1326, kap. A, čl. 13 až 23, kap. C, čl. 30 až 44 | ||
| 248 | Hardened concrete | Determination of static modulus of elasticity Regulated area: Tests |
ČSN ISO 1920-10 | ||
| 249 | Cement concrete pavement | Determination of layer thickness on a core Regulated area: Tests |
ČSN EN 13863-3 | ||
| 250 | Hardened concrete | Determination of rebound hardness with Schmidt hammers Regulated area: Tests |
ČSN 73 1373; ČSN EN 12 504-2 | ||
| 251 | Fresh concrete | Slump test Regulated area: Tests |
ČSN EN 12350-2 | ||
| 252 | Fresh concrete | Flow table test Regulated area: Tests |
ČSN EN 12350-5 | ||
| 253 | Fresh concrete | Determination of air content – pressure gauge method Regulated area: Tests |
ČSN EN 12350-7, mimo kap. 5 | ||
| 254 | Fresh concrete | Determination of density Regulated area: Tests |
ČSN EN 12350-6 | ||
| 255 | Fresh concrete | Slump-flow test Regulated area: Tests |
ČSN EN 12350-8 | ||
| 256 | Renders and claddings | Adhesion test of surface finishes of building structures Regulated area: Tests |
ČSN 73 2577 | ||
| 257 | Concretes, anchoring and insulating layers | Determination of layer adhesion and tensile strength Regulated area: Tests |
ČSN 73 6242, příl. B | ||
| 258 | Mortars | Determination of bond strength by pull-off Regulated area: Tests |
ČSN EN 1542, kap. 7 | ||
| 259 | Paints and varnishes | Determination of adhesion by pull-off Regulated area: Tests |
ČSN EN ISO 4624 | ||
| 260 | Anti-skid safety treatments (BPÚ) of road surfaces | Determination of tensile adhesion Regulated area: Tests |
TP 213, příl. A | ||
| 261 | Concrete base layers of bridge decks with an epoxy coating or insulating layer | Layer impermeability test Regulated area: Tests |
ČSN 73 6242, příl. D | ||
| 262 | Concrete base layers of bridge decks with an epoxy coating or insulating layer | Layer impermeability test by electrical voltage – spark test Regulated area: Tests |
ČSN 73 6242, příl. E | ||
| 263 | Concrete and reinforced concrete structures | Pile integrity measurement – PIT method Regulated area: Tests |
IZP č. 01/11 (Manuál k zařízení Pile echo tester) | ||
| 264 | Concrete and reinforced concrete structures | Pile integrity measurement – CHA method Regulated area: Tests |
IZP č. 01/16 (Manuál k zařízení CHA) | ||
| 265 | Hardened concrete | Determination of void content Regulated area: Tests |
ČSN 73 6124-2, příl. A | ||
| 266 | Sprayed concrete | Determination of compressive strength Regulated area: Tests |
ČSN EN 14488-2 | ||
| 267 | Aggregates | Determination of particle density and water absorption – pyknometer method Regulated area: Tests |
ČSN EN 1097-6, kap. 8, 9, příl. A, kap. A.4, příl. C | ||
| 268 | Aggregates | Determination of particle size distribution – sieving method Regulated area: Tests |
ČSN EN 933-1 | ||
| 269 | Aggregates | Determination of particle shape – shape index Regulated area: Tests |
ČSN EN 933-4 | ||
| 270 | Aggregates | Determination of loose bulk density Regulated area: Tests |
ČSN EN 1097-3 | ||
| 271 | Aggregates | Determination of water content by drying in a ventilated oven Regulated area: Tests |
ČSN EN 1097-5 | ||
| 272 | Coatings on structures | Measurement of thickness Regulated area: Tests |
ČSN EN ISO 2808, čl. 5.4.5, 5.5.5, 5.5.7 | ||
| 273 | Finished pavement layers | Determination of degree of compaction by the radiometric method Regulated area: Tests |
ČSN 72 1006, příl. F; ČSN 73 6160, čl. 7.2, metoda b | ||
| 274 | Surface of pavement courses and road base layers | Measurement of longitudinal and transverse unevenness with a straightedge and planograph Regulated area: Tests |
ČSN 73 6175, kap. 8, 9 | ||
| 275 | Surface of road pavements | Determination of macrotexture Regulated area: Tests |
ČSN EN 13036-1 | ||
| 276 | Joints of cement concrete pavements | Determination of the position of dowels and tie bars Regulated area: Tests |
IZP č. 01/18 (ČSN 73 6123-1; TP 233; Manuál k zařízení Inspekční georadarový systém) | ||
| 277 | Bound pavement layers | Determination of thickness Regulated area: Tests |
IZP č. 02/18 (ASTM D 4748-10; TP 233; Manuál k zařízení Inspekční georadarový systém) | ||
| 278 | Hydraulically bound mixtures | Determination of compressive strength Regulated area: Tests |
ČSN EN 13286-41 | ||
| 279 | Building materials and products | Determination of moisture content by drying at elevated temperature Regulated area: Tests |
ČSN EN ISO 12570 | ||
| 280 | Soils | Determination of the bearing ratio (CBR, IBI) Regulated area: Tests |
ČSN EN 13286-47 | ||
| 281 | Soils | Determination of particle density – pycnometer method Regulated area: Tests |
ČSN EN ISO 17892-3, mimo čl. 5.2 | ||
| 282 | Soils | Determination of particle size distribution Regulated area: Tests |
ČSN EN ISO 17892-4, mimo čl. 5.4 | ||
| 283 | Soils | Determination of consistency limits Regulated area: Tests |
ČSN EN ISO 17892-12, mimo čl. 4.3, 5.4, 6.3 | ||
| 284 | Soils | Determination of water content Regulated area: Tests |
ČSN EN ISO 17892-1 | ||
| 285 | Soils and loose fill materials | Determination of compactability – Proctor test Regulated area: Tests |
ČSN EN 13286-2, mimo čl. 7.3, 7.6 | ||
| 286 | Soils and loose fill materials | Static plate load test Regulated area: Tests |
ČSN 72 1006, příl. A, B, D; ČSN 73 6190 | ||
| 287 | Soils and loose fill materials | Dynamic load test with a light dynamic plate Regulated area: Tests |
ČSN 73 6192, čl. 3.1.3, 4.4, 5.3, 5.4, 6.2, 6.3 | ||
| 288 | Soils and loose fill materials | Determination of bulk density Regulated area: Tests |
ČSN 72 1010, kap. I, II, III, čl. A, D-1 | ||
| 289 | Non-cohesive soils, aggregates | Determination of relative density Regulated area: Tests |
ČSN 72 1018 | ||
| 290 | Asphalt mixture | Sampling of asphalt mixture Regulated area: Sampling |
ČSN EN 12697-27, čl. 4.1 až 4.4, 4.6, 4.7 | ||
| 291 | Hardened concrete | Sampling of hardened concrete (cores from the structure) Regulated area: Sampling |
ČSN EN 12504-1, kap. 6, 7 | ||
| 292 | Fresh concrete | Sampling of fresh concrete Regulated area: Sampling |
ČSN EN 12350-1 | ||
| 293 | Aggregates | Sampling of aggregates and reduction of samples Regulated area: Sampling |
ČSN EN 932-1, mimo čl. 8.2, 8.3; ČSN EN 932-2 | ||
Reference standards (167)
ASTM D 4748-10
IZP č. 01/11
IZP č. 01/15
IZP č. 01/16
IZP č. 01/18
IZP č. 01/21
IZP č. 02/18
IZP č. 03/03
IZP č. 2/10
Manuál k zařízení CHA
Manuál k zařízení Inspekční georadarový systém
Manuál k zařízení Pile echo tester
TP 213, příl. A
TP 233
Věstník MZ ČR, Ročník 2013, Částka 4
Věstník MZ ČR, Ročník 2023, Částka 14, část 3
ČSN 36 0011-1
ČSN 36 0011-3
ČSN 72 1006, příl. A, B, D
ČSN 72 1006, příl. F
ČSN 72 1010, kap. I, II, III čl. A, D-1
ČSN 72 1010, kap. I, II, III, čl. A, D-1
ČSN 72 1018
ČSN 72 2071, čl. 11.8
ČSN 72 2071, čl. 11.9
ČSN 72 2452
ČSN 72 2602, oddíl II, část A, B
ČSN 72 2603, kap. II. A, B, C
ČSN 72 2605, kap. V. A
ČSN 73 0212-5
ČSN 73 1316:1989, oddíly 2, 4
ČSN 73 1322
ČSN 73 1326, kap. A, čl. 13 až 23
ČSN 73 1326, kap. A, čl. 13 až 23, kap. C, čl. 30 až 44
ČSN 73 1373
ČSN 73 2011
ČSN 73 2011, příl. A
ČSN 73 2577
ČSN 73 6123-1
ČSN 73 6124-1, příl. A
ČSN 73 6124-1, příl. B
ČSN 73 6124-2, příl. A
ČSN 73 6160, čl. 7.2, metoda b
ČSN 73 6160, čl. 7.3
ČSN 73 6175, kap. 8, 9
ČSN 73 6190
ČSN 73 6192, čl. 3.1.3, 4.4, 5.3, 5.4, 6.2, 6.3
ČSN 73 6242, příl. B
ČSN 73 6242, příl. D
ČSN 73 6242, příl. E
ČSN EN 1015-1
ČSN EN 1015-11
ČSN EN 1015-12
ČSN EN 1015-3
ČSN EN 1015-4
ČSN EN 1015-6
ČSN EN 1015-7
ČSN EN 1015-9
ČSN EN 1097-3
ČSN EN 1097-5
ČSN EN 1097-6, kap. 7, příl. B
ČSN EN 1097-6, kap. 8, 9, příl. A, kap. A.4, příl. C
ČSN EN 1097-6:2014
ČSN EN 12 504-2
ČSN EN 12004-2, čl. 8.1
ČSN EN 12004-2, čl. 8.2
ČSN EN 12004-2, čl. 8.3
ČSN EN 12004-2, čl. 8.4
ČSN EN 12190
ČSN EN 12350-1
ČSN EN 12350-2
ČSN EN 12350-4
ČSN EN 12350-5
ČSN EN 12350-6
ČSN EN 12350-7, mimo kap. 5
ČSN EN 12350-8
ČSN EN 12390-3
ČSN EN 12390-5
ČSN EN 12390-6
ČSN EN 12390-7, mimo čl. 6.5
ČSN EN 12390-8
ČSN EN 12504-1, kap. 6, 7
ČSN EN 12504-1, mimo kap. 6, 7
ČSN EN 12504-2
ČSN EN 12697-1
ČSN EN 12697-13
ČSN EN 12697-2
ČSN EN 12697-27, čl. 4.1 až 4.4, 4.6, 4.7
ČSN EN 12697-29
ČSN EN 12697-30
ČSN EN 12697-36, čl. 6.1
ČSN EN 12697-5
ČSN EN 12697-6
ČSN EN 12697-8
ČSN EN 13036-1
ČSN EN 13286-2, mimo čl. 7.3, 7.6
ČSN EN 13286-41
ČSN EN 13286-47
ČSN EN 13294
ČSN EN 1338, příl. C
ČSN EN 1338, příl. D
ČSN EN 1338, příl. E
ČSN EN 1338, příl. F
ČSN EN 1339, příl. C
ČSN EN 1339, příl. D
ČSN EN 1339, příl. E
ČSN EN 1339, příl. F
ČSN EN 1340, příl. C
ČSN EN 1340, příl. D
ČSN EN 1340, příl. E
ČSN EN 1340, příl. F
ČSN EN 13409
ČSN EN 13791
ČSN EN 13863-3
ČSN EN 13872
ČSN EN 13888-2, čl. 9.1
ČSN EN 13888-2, čl. 9.3
ČSN EN 13892-2
ČSN EN 14488-2
ČSN EN 1542, kap. 7
ČSN EN 196-1
ČSN EN 196-3
ČSN EN 196-3 kap. 7
ČSN EN 196-3, kap. 1 až 6
ČSN EN 445, čl. 4.3
ČSN EN 445:1998, čl. 3.3 až 3.4.2.3, čl. 3.5 až 3.5.1.4
ČSN EN 450-1
ČSN EN 480-11
ČSN EN 480-2
ČSN EN 480-4
ČSN EN 480-5
ČSN EN 772-1+A1
ČSN EN 772-13
ČSN EN 772-16
ČSN EN 932-1, mimo čl. 8.2, 8.3
ČSN EN 932-2
ČSN EN 933-1
ČSN EN 933-4
ČSN EN 933-5
ČSN EN 933-8+A1
ČSN EN ISO 10319
ČSN EN ISO 11058
ČSN EN ISO 12236
ČSN EN ISO 12570
ČSN EN ISO 12956
ČSN EN ISO 13433
ČSN EN ISO 16283-1
ČSN EN ISO 16283-2
ČSN EN ISO 16283-3
ČSN EN ISO 17892-1
ČSN EN ISO 17892-12, mimo čl. 4.3, 5.4, 6.3
ČSN EN ISO 17892-12, čl. 4.3
ČSN EN ISO 17892-3, mimo čl. 5.2
ČSN EN ISO 17892-4, mimo čl. 5.4
ČSN EN ISO 2808, čl. 5.4.5, 5.5.5, 5.5.7
ČSN EN ISO 3382-2
ČSN EN ISO 4624
ČSN EN ISO 717-1
ČSN EN ISO 717-2
ČSN EN ISO 9612
ČSN EN ISO 9862
ČSN EN ISO 9863-1
ČSN EN ISO 9864
ČSN ISO 1920-10
ČSN ISO 1996-1
ČSN ISO 1996-2
ČSN ISO 1999