🇨🇿 Institut pro testování a certifikaci, a.s. PL
ConstructionMaterials & polymers
Institut pro testování a certifikaci, a.s. is a laboratory accredited by ČIA under number 1007.1 (Zlín, Czech Republic). Its accreditation scope covers 414 test methods in the following areas: Construction, Materials & polymers. Test objects include: Products and systems for repair of concrete structures, Surfaces for sports areas, Thermal insulating products, Doors and windows.
At a glance
- Accreditation number: ČIA 1007.1
- Methods in scope: 414
- Types of test objects: 140
- City: Zlín, Czech Republic
- Valid until: 17-06-2029
- Accreditation number
- 1007.1
- Accreditation body
- ČIA
- Address
- K Cihelně 304, Louky, 763 02 Zlín
- City
- Zlín, Czech Republic
- Division
- Laboratorium Badań Budowlanych Zlín
- Valid until
- 17-06-2029
What this laboratory tests (140)
- Products and systems for repair of concrete structures — 19 methods
- Surfaces for sports areas — 17 methods
- Thermal insulating products — 14 methods
- Doors and windows — 13 methods
- Bitumen — 11 methods
- Bitumen sheets — 11 methods
- Paints and varnishes — 11 methods
- Plastic and rubber sheets — 11 methods
- Noise barriers — 9 methods
- Structural timber and glued laminated timber — 9 methods
- Masonry units — 8 methods
- Bitumen, plastic and rubber sheets — 7 methods
- Hardened concrete — 7 methods
- Sealants — 7 methods
- Concrete paving flags — 6 methods
- and 125 more
Laboratory sections (2)
- Building testing laboratory (třída Tomáše Bati 5264) — 388 methods
- Building testing laboratory (K Cihelně 304) — 26 methods
Laboratory locations
- Laboratorium badań budowlanych (K Cihelně 304) — K Cihelně 304, Louky
- Laboratorium badań budowlanych (třída Tomáše Bati 5264) — třída Tomáše Bati 5264
Certificate information
- Certificate date
- 31.07.2026
Accreditation scope — test methods (414)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Building testing laboratory (třída Tomáše Bati 5264) | |||||
| 1 | Building materials, building products, building structures | Determination of thermal resistance, thermal transmittance factor, thermal conductivity coefficient by means of guarded hot plate Regulated area: 1 Thermal engineering tests |
ISO 8302 | ||
| 2 | Dry and wet products with medium and low thermal resistance | Determination of thermal resistance, thermal transmittance factor, thermal conductivity coefficient by means of guarded hot plate Regulated area: 1 Thermal engineering tests |
ČSN EN 12664; ČSN EN 1946-2 | ||
| 3 | Products with high and medium thermal resistance | Determination of thermal resistance, thermal transmittance factor, thermal conductivity coefficient by means of guarded hot plate Regulated area: 1 Thermal engineering tests |
ČSN EN 12667; ČSN EN 1946-2 | ||
| 4 | Products with a large thickness of high and medium thermal resistance | Determination of thermal resistance, thermal transmittance factor, thermal conductivity coefficient by means of guarded hot plate Regulated area: 1 Thermal engineering tests |
ČSN EN 12939 | ||
| 5 | Glass in construction | Determination of thermal transmittance - Calculation method - Testing method Regulated area: 1 Thermal engineering tests |
ČSN EN 673; ISO 10291; ČSN EN 674 | ||
| 6 | Building products and insulating glass | Determination of thermal resistance, thermal conductivity and thermal transmittance using a mobile plate device in a vertical position Regulated area: 1 Thermal engineering tests |
SZ-23-01 (ISO 8302; ČSN EN 674; ČSN EN 12664; ČSN EN 12667) | ||
| 7 | Building structures, doors and windows | Measurement of surface temperatures in the place of thermal bridges Regulated area: 1 Thermal engineering tests |
ČSN 73 0546 | ||
| 8 | Insulating glass | Reference method for measuring dew point temperature Regulated area: 1 Thermal engineering tests |
ČSN EN 1279-6, příloha K | ||
| 9 | Insulating glass | Determination of dimensions Regulated area: 1 Thermal engineering tests |
ČSN EN 1279-1, čl. 6.3 | ||
| 10 | Insulating glass | Determination of moisture penetration index by long-term test method Regulated area: 1 Thermal engineering tests |
ČSN EN 1279-2 | ||
| 11 | Insulating glass | Determination of gas concentration with a gas analyzer Regulated area: 1 Thermal engineering tests |
SZ-23-02 (návod k analyzátoru HELOX 4 KVSN - F) | ||
| 12 | Insulating glass | Climatic tests (temperature, humidity) Regulated area: 1 Thermal engineering tests |
ČSN EN 1279-3, čl. 6.1, 6.2.1; ČSN EN 1279-2, čl. 6.3 | ||
| 13 | Insulating glass | Determination of moisture penetration index and gas concentration Regulated area: 1 Thermal engineering tests |
ČSN EN 1279-6, čl. B.4; SZ-23-02 (návod k analyzátoru HELOX 4 KVSN – F) | ||
| 14 | Windows, doors and shutters | Determination of thermal transmittance by box method Regulated area: 1 Thermal engineering tests |
ČSN EN ISO 12567-1 | ||
| 15 | Frames of windows, doors and shutters | Determination of thermal transmittance by box method Regulated area: 1 Thermal engineering tests |
ČSN EN 12412-2 | ||
| 16 | Roller shutter boxes | Determination of thermal transmittance by box method Regulated area: 1 Thermal engineering tests |
ČSN EN 12412-4 | ||
| 17 | Building products, building structures, doors and windows | Determination of thermal resistance and thermal transmittance by box method Regulated area: 1 Thermal engineering tests |
ČSN EN ISO 8990 | ||
| 18 | Roof windows, roof lights and other projecting windows | Determination of thermal transmittance by box method Regulated area: 1 Thermal engineering tests |
ČSN EN ISO 12567-2 | ||
| 19 | Building products, building structures, doors and windows | Determination of thermal resistance and thermal transmittance by box method Regulated area: 1 Thermal engineering tests |
ČSN EN 1946-4 | ||
| 20 | Doors and windows | Determination of distances and geometrical properties Regulated area: 3 Tests of doors and windows |
ČSN EN 951; ČSN EN 952 | ||
| 21 | Doors and windows | Determination of resistance to vertical load Regulated area: 3 Tests of doors and windows |
ČSN EN 947; ČSN EN 14608 | ||
| 22 | Doors and windows | Determination of the resistance to static torsion Regulated area: 3 Tests of doors and windows |
ČSN EN 948; ČSN EN 14609 | ||
| 23 | Doors and windows | Determination of resistance to impact load Regulated area: 3 Tests of doors and windows |
ČSN EN 949; ČSN EN 950; ČSN EN 13049; ČSN EN 1873+A1, čl. 6.5.2; ČSN EN 14963, čl. 6.4.2.1, 6.4.2.2 | ||
| 24 | Building structures | Determination of resistance to impact load Regulated area: 3 Tests of doors and windows |
ČSN 73 2035; ČSN EN 14019 | ||
| 25 | Doors and windows | Repeated opening and closing test Regulated area: 3 Tests of doors and windows |
ČSN EN 1191; DIN 18055:1981, čl. 3.4.3 | ||
| 26 | Doors and windows | Determination of resistance to wind load Regulated area: 3 Tests of doors and windows |
ČSN EN 12211; ČSN EN 1873+A1, čl. 6.5.1; ČSN EN 14963, čl. 6.4.1 | ||
| 27 | Building structures, Building parts | Determination of resistance to wind load Regulated area: 3 Tests of doors and windows |
ČSN EN 12179 | ||
| 28 | Doors and windows | Determination of resistance to wind load Regulated area: 3 Tests of doors and windows |
ČSN EN 12444 | ||
| 29 | Building structures, Building parts | Determination of resistance to wind load Regulated area: 3 Tests of doors and windows |
ČSN EN 1932 ed.2 | ||
| 30 | Doors and windows | Air permeability test Regulated area: 3 Tests of doors and windows |
ČSN EN 1026; ČSN EN 1873+A1, čl. 6.7; ČSN EN 12427 | ||
| 31 | Building structures, parts and elements | Air permeability test Regulated area: 3 Tests of doors and windows |
ČSN EN 12153; ČSN EN 12114 | ||
| 32 | Doors and windows | Water tightness test Regulated area: 3 Tests of doors and windows |
ČSN EN 1027; ČSN EN 12155; ČSN EN 1873+A1, čl. 6.4; ČSN EN 14963, čl. 6.3; ČSN EN 12489 | ||
| 33 | Building structures | Water tightness test Regulated area: 3 Tests of doors and windows |
ČSN EN 12865; ČSN EN 13051 | ||
| 34 | Doors and windows | Force test Regulated area: 3 Tests of doors and windows |
ČSN EN 12046-2; ČSN EN 12453+A1; ČSN EN 12046-1; ČSN EN 16005+A1 | ||
| 35 | Gates | Testing of mechanical properties of gates Regulated area: 3 Tests of doors and windows |
ČSN EN 12605:2001, čl. 5.1, 5.2; ČSN EN 12604+A1 | ||
| 36 | Noise barriers | Determination of the resistance of noise barrier elements to wind load and snow removal operations Regulated area: 4 Statics tests |
ČSN EN 1794-1:2004, příloha A, E; ČSN EN 1794-1, příloha A, E | ||
| 37 | Noise barriers | Test of stone impact resistance of noise barrier elements Regulated area: 4 Statics tests |
ČSN EN 1794-1:2004, příloha C; ČSN EN 1794-1, příloha C | ||
| 38 | Noise barriers | Determination of dead weight of elements Regulated area: 4 Statics tests |
ČSN EN 1794-1:2004, příloha B, čl. B.2.1, B.2.3; ČSN EN 1794-1, příloha B, čl. B.2.1, B.2.3 | ||
| 39 | Noise barriers | Determination of the effects of dead weight Regulated area: 4 Statics tests |
SZ-23-03 (ČSN EN 1794-1:2004, příloha B, čl. B.3.1, B.3.2; ČSN EN 1794-1, příloha B, čl. B.3.1, B.3.2) | ||
| 40 | Guard rails | Determination of mechanical resistance and stability – resistance to horizontal loads Regulated area: 4 Statics tests |
ČSN 74 3305, příloha B; SZ-23-04 (ČSN 73 2030) | ||
| 41 | Wooden structures | Load tests Regulated area: 4 Statics tests |
ČSN EN 380 | ||
| 42 | Bitumen | Determination of the softening point – Ring and Ball method Regulated area: 5 Bitumen testing |
ČSN EN 1427 | ||
| 43 | Bitumen | Determination of ductility Regulated area: 5 Bitumen testing |
ČSN 65 7061 | ||
| 44 | Bitumen | Determination of needle penetration Regulated area: 5 Bitumen testing |
ČSN EN 1426 | ||
| 45 | Bitumen | Determination of the Fraass breaking point Regulated area: 5 Bitumen testing |
ČSN EN 12593 | ||
| 46 | Bitumen | Determination of solubility Regulated area: 5 Bitumen testing |
ČSN EN 12592 | ||
| 47 | Bitumen | Determination of ash content Regulated area: 5 Bitumen testing |
ČSN EN ISO 6245 | ||
| 48 | Bitumen | Determination of density Regulated area: 5 Bitumen testing |
ČSN EN ISO 3838 | ||
| 49 | Bitumen | Determination of efflux time Regulated area: 5 Bitumen testing |
ČSN EN 12846-1; ČSN EN 12846-2 | ||
| 50 | Bitumen | Determination of adhesion of bituminous products to aggregates Regulated area: 5 Bitumen testing |
ČSN EN 13614 | ||
| 51 | Bitumen | Determination of the elastic recovery, elastic restoration Regulated area: 5 Bitumen testing |
ČSN EN 13398 | ||
| 52 | Bitumen | Determination of storage stability of modified bitumen Regulated area: 5 Bitumen testing |
ČSN EN 13399 | ||
| 53 | Joint sealants | Determination of cone penetration Regulated area: 5 Bitumen testing |
ČSN EN 13880-2 | ||
| 54 | Joint sealants | Determination of flow resistance Regulated area: 5 Bitumen testing |
ČSN EN 13880-5 | ||
| 55 | Joint sealants | Determination of heat resistance Regulated area: 5 Bitumen testing |
ČSN EN 13880-4 | ||
| 56 | Joint sealants | Determination of penetration and recovery (resilience) Regulated area: 5 Bitumen testing |
ČSN EN 13880-3 | ||
| 57 | Bitumen emulsions | Determination of breaking behaviour by mineral filler method Regulated area: 5 Bitumen testing |
ČSN EN 13075-1 | ||
| 58 | Bitumen emulsions | Determination of residue on sieving and storage stability Regulated area: 5 Bitumen testing |
ČSN EN 1429 | ||
| 59 | Bitumen emulsions | Determination of water content by azeotropic distillation method Regulated area: 5 Bitumen testing |
ČSN EN 1428 | ||
| 60 | Bitumen emulsions | Determination of cohesion by pendulum Regulated area: 5 Bitumen testing |
ČSN EN 13588 | ||
| 61 | Hot applied joint sealants | Determination of adhesion and cohesion following continuous extension and compression Regulated area: 5 Bitumen testing |
ČSN EN 13880-10 | ||
| 62 | Hot applied joint sealants | Determination of adhesion and cohesion following discontinuous extension Regulated area: 5 Bitumen testing |
ČSN EN 13880-13 | ||
| 63 | Waterproofing materials | Determination of water-vapour transmission properties - Cup method Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN 77 0332 | ||
| 64 | Waterproofing materials | Determination of waterproof sheets chemical resistance against certain solutions– NaCl, Ca(OH)2, H2CO3 Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN ISO 175 | ||
| 65 | Underlays | Waterproofing determination Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 13111 | ||
| 66 | Flexible sheets for waterproofing | Static crack bridging Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN 73 6242, příloha C | ||
| 67 | Flexible sheets for waterproofing | Determination of crack bridging ability Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 14224 | ||
| 68 | Flexible sheets for waterproofing | Determination of adhesion by shear test Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 13653 | ||
| 69 | Flexible sheets for waterproofing | Determination of adhesion to substrates Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 13596 | ||
| 70 | Flexible sheets for waterproofing | Determination of shear test cohesion after heat conditioning Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 14691 | ||
| 71 | Flexible sheets for waterproofing | Determination of water absorption Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 14223 | ||
| 72 | Plastic and rubber sheets | Determination of resistance to liquid chemicals Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1847 | ||
| 73 | Plastic and rubber sheets | Determination of stress-strain properties Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12311-2 | ||
| 74 | Plastic and rubber sheets | Determination of dimensional changes Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1107-2 | ||
| 75 | Plastic and rubber sheets | Determination of the area mass Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1849-2, čl. 6 | ||
| 76 | Plastic and rubber sheets | Determination of visible defects Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1850-2 | ||
| 77 | Plastic and rubber sheets | Determination of dimensions Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1848-2 | ||
| 78 | Plastic and rubber sheets | Determination of thickness Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1849-2, čl. 5 | ||
| 79 | Plastic and rubber sheets | Determination of resistance to tearing Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12310-2 | ||
| 80 | Plastic and rubber sheets | Determination of flexibility at low temperatures Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 495-5 | ||
| 81 | Plastic and rubber sheets | Determination of shear strength Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12317-2 | ||
| 82 | Plastic and rubber sheets | Determination of peel resistance Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12316-2 | ||
| 83 | Bitumen, plastic and rubber sheets | Method of artificial ageing by long term exposure to elevated temperature Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1296 | ||
| 84 | Bitumen, plastic and rubber sheets | Determination of resistance to impact Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12691 | ||
| 85 | Bitumen, plastic and rubber sheets | Artificial aging by long term exposure to the combination of UV radiation, elevated temperature and water Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1297 | ||
| 86 | Bitumen, plastic and rubber sheets | Waterproofing determination Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1928 | ||
| 87 | Bitumen, plastic and rubber sheets | Determination of water vapour transmission properties Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1931 | ||
| 88 | Bitumen, plastic and rubber sheets | Determination of watertightness after stretching at low temperature Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 13897 | ||
| 89 | Bitumen, plastic and rubber sheets | Determination of resistance to static loading Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12730 | ||
| 90 | Bitumen, plastic and rubber sheets, bitumen shingles | Determination of flow resistance at elevated temperature Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1110 | ||
| 91 | Bitumen sheets | Determination of the behaviour during application of mastic asphalt Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 14693 | ||
| 92 | Bitumen sheets | Determination of visible defects Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1850-1 | ||
| 93 | Bitumen sheets | Determination of stress-strain properties Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12311-1 | ||
| 94 | Bitumen sheets | Determination of resistance to tearing Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12310-1 | ||
| 95 | Bitumen sheets | Determination of flexibility at low temperatures Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1109 | ||
| 96 | Bitumen sheets | Determination of shear resistance of joints Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12317-1 | ||
| 97 | Bitumen sheets | Determination of peel resistance of joints Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12316-1 | ||
| 98 | Bitumen sheets | Determination of dimensions Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1848-1 | ||
| 99 | Bitumen sheets | Determination of thickness Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1849-1, čl. 4 | ||
| 100 | Bitumen sheets | Determination of dimensional changes Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1107-1 | ||
| 101 | Bitumen sheets | Determination of the area mass Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1849-1, čl. 5 | ||
| 102 | Bitumen shingles | Determination of geometric and mechanical properties Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 544 ed.2 | ||
| 103 | Bitumen shingles | Determination of the area mass Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 544 ed.2, čl. 6.2 | ||
| 104 | Bitumen shingles | Determination of geometric properties Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 544 ed.2, čl. 6.3 | ||
| 105 | Bitumen shingles | Determination of water absorption Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 544 ed.2, čl. 6.4.3 | ||
| 106 | Bitumen shingles | Determination of blistering resistance Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 544 ed.2, čl. 6.4.5 | ||
| 107 | Corrugated bitumen sheets | Determination of geometric, mechanical and physical properties Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 534+A1 | ||
| 108 | Thermal insulating products | Determination of stress-strain properties Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1607; ČSN EN 13496 | ||
| 109 | Thermal insulating products | Compression strength Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 826:2013; ČSN EN ISO 29469 | ||
| 110 | Thermal insulating products | Determination of compression set Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1605 | ||
| 111 | Thermal insulating products | Determination of geometric dimensions Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 822:2013; ČSN EN ISO 29465; ČSN EN 824; ČSN EN 12085:2013; ČSN EN 12431:2013; ČSN EN ISO 29770; ČSN EN 13467:2019; ČSN EN 13165+A2, čl. 5.3.3; ČSN EN 825:2013; ČSN EN ISO 29468; ČSN EN ISO 29768; ČSN EN ISO 12628 | ||
| 112 | Thermal insulating products | Determination of thickness Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 823; ČSN EN ISO 29466 | ||
| 113 | Thermal insulating products | Determination of dimensional changes Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1604; ČSN EN 1603 | ||
| 114 | Thermal insulating products | Determination of water content Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12429 | ||
| 115 | Thermal insulating products | Determination of indentation hardness Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12430 | ||
| 116 | Thermal insulating products | Determination of bending strength Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12089 | ||
| 117 | Thermal insulating products | Determination of shear strength Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12090 | ||
| 118 | Thermal insulating products | Determination of water absorption Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN ISO 16535; ČSN EN ISO 29767 | ||
| 119 | Thermal insulating products | Determination of resistance to freezing and thawing Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12091:2013; ČSN EN ISO 16546 | ||
| 120 | Thermal insulating products | Determination of water vapour transmission properties Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 12086 | ||
| 121 | Thermal insulating products | Determination of volume weight Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 1602:2013; ČSN EN ISO 29470 | ||
| 122 | Thermal insulating products - pipe insulation | Determination of water vapour transmission properties Regulated area: 6 Flexible sheets for waterproofing and thermal insulating products |
ČSN EN 13469:2013; ČSN EN ISO 12629 | ||
| 123 | Textiles | Determination of flexibility at low temperatures Regulated area: 7 Textiles and geotextiles |
ČSN EN 1876-1 | ||
| 124 | Textiles | Determination of thickness Regulated area: 7 Textiles and geotextiles |
ČSN EN ISO 2286-3; ČSN EN ISO 9073-2; ČSN EN ISO 5084 | ||
| 125 | Textiles | Determination of the area mass Regulated area: 7 Textiles and geotextiles |
ČSN EN ISO 9073-1 | ||
| 126 | Geosynthetics, geotextiles | Static puncture test (CBR test) Regulated area: 7 Textiles and geotextiles |
ČSN EN ISO 12236 | ||
| 127 | Geosynthetics, geotextiles | Dynamic perforation test (cone drop test) Regulated area: 7 Textiles and geotextiles |
ČSN EN ISO 13433 | ||
| 128 | Geosynthetics, geotextiles | Wide-width tensile test Regulated area: 7 Textiles and geotextiles |
ČSN EN ISO 10319 | ||
| 129 | Geosynthetics, geotextiles | Determination of thickness Regulated area: 7 Textiles and geotextiles |
ČSN EN ISO 9863-1 | ||
| 130 | Geosynthetics, geotextiles | Determination of the area mass Regulated area: 7 Textiles and geotextiles |
ČSN EN ISO 9864 | ||
| 131 | Flexible cellular polymeric materials | Determination of stress-strain properties Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 1798 | ||
| 132 | Flexible cellular polymeric materials | Determination of compression set Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 1856 | ||
| 133 | Flexible cellular polymeric materials | Resistance against compression Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 3386-2; ČSN EN ISO 3386-1 | ||
| 134 | Plastics | Determination of water absorption Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 62 | ||
| 135 | Plastics | Determination of stress-strain properties Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 527-1; ČSN EN ISO 527-2; ČSN EN ISO 527-3 | ||
| 136 | Plastics | Determination of compression properties Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 604 | ||
| 137 | Plastics | Determination of thickness Regulated area: 8 Plastics and plastic products |
ČSN 64 0181 | ||
| 138 | Plastics | Artificial aging by long term exposure to the combination of UV radiation, elevated temperature and water Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 4892-3 | ||
| 139 | Rigid plastics | Determination of stress-strain properties Regulated area: 8 Plastics and plastic products |
ISO 1926 | ||
| 140 | Rigid cellular plastics | Determination of compression properties Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 844 | ||
| 141 | Plastic products | Determination of flexural properties Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 178 | ||
| 142 | Cellular plastics and rubbers | Determination of dimensions Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 1923 | ||
| 143 | Cellular plastics and rubbers | Determination of volume weight Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 845 | ||
| 144 | Polymer adhesives | Determination of bond strength Regulated area: 8 Plastics and plastic products |
ČSN EN 12188, čl. 8 | ||
| 145 | PVC-U boards | Determination of thickness Regulated area: 8 Plastics and plastic products |
ČSN 64 3211, čl. 18 | ||
| 146 | PVC-U boards | Measurement of dimensions Regulated area: 8 Plastics and plastic products |
ČSN 64 3211, čl. 19 | ||
| 147 | PVC-U boards | Determination of dimensional changes Regulated area: 8 Plastics and plastic products |
ČSN 64 3211, čl. 25 | ||
| 148 | PVC-U boards | Determination of delamination Regulated area: 8 Plastics and plastic products |
ČSN 64 3211, čl. 29 | ||
| 149 | PVC profiles | Determination of the strength of welded corners and T-joints Regulated area: 8 Plastics and plastic products |
ČSN EN 514 | ||
| 150 | PVC profiles | Determination of the appearance after heat exposure Regulated area: 8 Plastics and plastic products |
ČSN EN 478 | ||
| 151 | PVC profiles | Determination of heat reversion Regulated area: 8 Plastics and plastic products |
ČSN EN 479 | ||
| 152 | PVC-U profiles (for the production of windows and doors) | Determination of appearance Regulated area: 8 Plastics and plastic products |
ČSN EN 12608-1+A1, čl. 6.1 | ||
| 153 | PVC-U profiles (for the production of windows and doors) | Measurement of dimensions Regulated area: 8 Plastics and plastic products |
ČSN EN 12608-1+A1, čl. 6.2 | ||
| 154 | PVC-U profiles (for the production of windows and doors) | Determination of length weight Regulated area: 8 Plastics and plastic products |
ČSN EN 12608-1+A1, čl. 6.3 | ||
| 155 | Cellular materials | Determination of stress-strain properties Regulated area: 8 Plastics and plastic products |
ČSN 64 5432 | ||
| 156 | Cellular materials | Determination of indentation hardness Regulated area: 8 Plastics and plastic products |
ČSN EN ISO 2439 | ||
| 157 | Cellular materials | Determination of bending strength Regulated area: 8 Plastics and plastic products |
ČSN 64 5444 | ||
| 158 | Cellular materials | Determination of dimensional stability Regulated area: 8 Plastics and plastic products |
ČSN 64 5405 | ||
| 159 | Sealants | Determination of stress-strain properties Regulated area: 9 Sealants |
ČSN EN ISO 8339; ČSN EN ISO 10591; ČSN EN ISO 8340; ČSN EN ISO 10590; ČSN EN ISO 11431 | ||
| 160 | Sealants | Resistance against compression Regulated area: 9 Sealants |
ČSN EN ISO 11432 | ||
| 161 | Sealants | Determination of tensile lap-shear strength of bonded assemblies Regulated area: 9 Sealants |
ČSN EN 1465 | ||
| 162 | Sealants | Determination of adhesion and cohesion at constant temperature and at a temperature cycling Regulated area: 9 Sealants |
ČSN EN ISO 9046; ČSN EN ISO 9047 | ||
| 163 | Sealants | Determination of volume and weight changes Regulated area: 9 Sealants |
ČSN EN ISO 10563 | ||
| 164 | Sealants | Determination of flow properties Regulated area: 9 Sealants |
ČSN EN ISO 7390 | ||
| 165 | Sealants | Determination of the elastic recovery Regulated area: 9 Sealants |
ČSN EN ISO 7389 | ||
| 166 | Polymer-modified bitumen sealants | Determination of crack bridging ability Regulated area: 9 Sealants |
ČSN EN 15812 | ||
| 167 | Polymer-modified bitumen sealants | Waterproofing determination Regulated area: 9 Sealants |
ČSN EN 15820 | ||
| 168 | Adhesives | Determination of peeling resistance Regulated area: 10 Adhesives |
ČSN EN ISO 8510-2 | ||
| 169 | Adhesives | Peeling test of the specimen made of flexible and solid adherents at 90° angle Regulated area: 10 Adhesives |
ČSN EN 28510-1 | ||
| 170 | Adhesives | Peeling test for assemblies made from flexible adherents Regulated area: 10 Adhesives |
ČSN EN ISO 11339 | ||
| 171 | Adhesives for load-bearing timber structures | Determination of bending strength/shear Regulated area: 10 Adhesives |
ČSN EN 302-1 | ||
| 172 | Wood adhesives | Determination of stress-strain properties Regulated area: 10 Adhesives |
ČSN EN 205 | ||
| 173 | Adhesives for floor coverings or wall coverings | Determination of shear strength Regulated area: 10 Adhesives |
ČSN EN ISO 22632 | ||
| 174 | Hard elastic and elastic adhesives | Determination of shear strength Regulated area: 10 Adhesives |
ČSN EN ISO 17178, čl. 4.4 | ||
| 175 | Adhesives for ceramic tiles | Determination of transverse deformation Regulated area: 10 Adhesives |
ČSN EN 12004-2, čl. 8.6 | ||
| 176 | Adhesives for ceramic tiles | Determination of open time Regulated area: 10 Adhesives |
ČSN EN 12004-2, čl. 8.1 | ||
| 177 | Adhesives for ceramic tiles | Determination of slip Regulated area: 10 Adhesives |
ČSN EN 12004-2, čl. 8.2 | ||
| 178 | Adhesives for ceramic tiles | Determination of adhesion by tensile test Regulated area: 10 Adhesives |
ČSN EN 12004-2, čl. 8.3 | ||
| 179 | Adhesives for ceramic tiles | Determination of adhesion by shear test Regulated area: 10 Adhesives |
ČSN EN 12004-2, čl. 8.4; ČSN EN 12004-2, čl. 8.5 | ||
| 180 | Adhesives for floor coverings or wall coverings | Determination of dimensional changes Regulated area: 10 Adhesives |
ČSN EN ISO 22635 | ||
| 181 | Adhesives for floor coverings or wall coverings | Determination of dimensional changes Regulated area: 10 Adhesives |
ČSN EN ISO 22633 | ||
| 182 | Adhesives for floor coverings or wall coverings | Peel test Regulated area: 10 Adhesives |
ČSN EN ISO 22631 | ||
| 183 | Adhesives for bonding parquet to subfloor | Determination of shear strength Regulated area: 10 Adhesives |
ČSN EN ISO 17178, čl. 4.2 | ||
| 184 | Adhesives for bonding parquet to subfloor | Determination of the tensile strength Regulated area: 10 Adhesives |
ČSN EN ISO 17178, čl. 4.3 | ||
| 185 | Adhesives - floor smoothing and/or levelling compounds | Determination of consistence, flow characteristics Regulated area: 10 Adhesives |
ČSN EN 12706 | ||
| 186 | Paints and varnishes | Determination of impact resistance Regulated area: 11 Paints and surface treatments |
ČSN EN ISO 6272-1 | ||
| 187 | Paints and varnishes | Determination of adhesion to substrates Regulated area: 11 Paints and surface treatments |
ČSN EN ISO 4624 | ||
| 188 | Paints and varnishes | Determination of coating thickness Regulated area: 11 Paints and surface treatments |
ČSN EN ISO 2808, čl. 4.2.4, 4.3, 5.3, 5.5.6, 5.5.7, 5.8.4, 5.4.4 | ||
| 189 | Paints and varnishes | Cross-cut test Regulated area: 11 Paints and surface treatments |
ČSN EN ISO 2409 | ||
| 190 | Paints and varnishes | Determination of resistance to liquid chemicals Regulated area: 11 Paints and surface treatments |
ČSN EN ISO 2812-1; ČSN EN ISO 2812-2 | ||
| 191 | Paints and varnishes | Determination of resistance to humidity Regulated area: 11 Paints and surface treatments |
ČSN EN ISO 6270-1 | ||
| 192 | Paints and varnishes | Determination of water absorption coefficient by partial immersion Regulated area: 11 Paints and surface treatments |
ČSN EN ISO 15148 | ||
| 193 | Paints and varnishes | Determination of flow time by use of flow cups Regulated area: 11 Paints and surface treatments |
ČSN EN ISO 2431 | ||
| 194 | Paints and varnishes | Building structures – Resistance of finish to sudden temperature changes Regulated area: 11 Paints and surface treatments |
ČSN 73 2581 | ||
| 195 | Paints and varnishes | Determination of water-vapour transmission properties - Cup method Regulated area: 11 Paints and surface treatments |
ČSN EN ISO 7783 | ||
| 196 | Paints and varnishes | Determination of liquid water permeability Regulated area: 11 Paints and surface treatments |
ČSN EN 1062-3 | ||
| 197 | Wood coatings | Assessment of the liquid water permeability Regulated area: 11 Paints and surface treatments |
ČSN EN 927-5 | ||
| 198 | Waterproof coatings | Waterproofing determination Regulated area: 11 Paints and surface treatments |
ČSN EN 14891 ed. 2, příloha A.7 | ||
| 199 | Surface treatments of building structures | Determination of adhesion to substrates Regulated area: 11 Paints and surface treatments |
ČSN 73 2577 | ||
| 200 | Surface treatments of building structures | Determination of adhesion to the substrate after freezing and thawing Regulated area: 11 Paints and surface treatments |
ČSN 73 2579 | ||
| 201 | Surface treatments of building structures | Waterproofing determination Regulated area: 11 Paints and surface treatments |
ČSN 73 2578 | ||
| 202 | Products for repair of concrete structures | Determination of slant shear strength Regulated area: 11 Paints and surface treatments |
ČSN EN 12615 | ||
| 203 | Products and systems for repair of concrete structures | Determination of adhesion to substrates Regulated area: 11 Paints and surface treatments |
ČSN EN 1542 | ||
| 204 | Products and systems for repair of concrete structures | Determination of adhesion to substrates Regulated area: 11 Paints and surface treatments |
ČSN EN 12636 | ||
| 205 | Products and systems for repair of concrete structures | Determination of adhesion of concrete to concrete Regulated area: 11 Paints and surface treatments |
ČSN EN 12636, čl. 5 | ||
| 206 | Products and systems for repair of concrete structures | Determination of modulus of elasticity in compression Regulated area: 11 Paints and surface treatments |
ČSN EN 13412 | ||
| 207 | Products and systems for repair of concrete structures | Determination of volumetric change after drying cycles and submersion in the water Regulated area: 11 Paints and surface treatments |
ČSN EN 14498 | ||
| 208 | Products and systems for repair of concrete structures | Determination of resistance to capillary absorption Regulated area: 11 Paints and surface treatments |
ČSN EN 13057 | ||
| 209 | Products and systems for repair of concrete structures | Determination of resistance to liquid chemicals Regulated area: 11 Paints and surface treatments |
ČSN EN 13529 | ||
| 210 | Products and systems for repair of concrete structures | Determination of setting time Regulated area: 11 Paints and surface treatments |
ČSN EN 13294 | ||
| 211 | Products and systems for repair of concrete structures | Determination of compatibility with wet concrete Regulated area: 11 Paints and surface treatments |
ČSN EN 13578 | ||
| 212 | Products and systems for repair of concrete structures | Determination of contraction and expansion Regulated area: 11 Paints and surface treatments |
ČSN EN 12617-4 | ||
| 213 | Products and systems for repair of concrete structures | Determination of thermal expansion coefficient Regulated area: 11 Paints and surface treatments |
ČSN EN 1770 | ||
| 214 | Products and systems for repair of concrete structures | Determination of resistance to thermal cycling with CHRL solution immersion Regulated area: 11 Paints and surface treatments |
ČSN EN 13687-1 | ||
| 215 | Products and systems for repair of concrete structures | Determination of bonding cement suitability for surface concrete application Regulated area: 11 Paints and surface treatments |
ČSN EN 1799 | ||
| 216 | Products and systems for repair of concrete structures | Determination of resistance to temperature cycling without immersion in CHRL solution Regulated area: 11 Paints and surface treatments |
ČSN EN 13687-3 | ||
| 217 | Products and systems for repair of concrete structures | Determination of resistance to temperature cycling in dry state Regulated area: 11 Paints and surface treatments |
ČSN EN 13687-4 | ||
| 218 | Products and systems for repair of concrete structures | Determination of resistance to temperature shock Regulated area: 11 Paints and surface treatments |
ČSN EN 13687-5 | ||
| 219 | Products and systems for repair of concrete structures | Thunder-shower cycling Regulated area: 11 Paints and surface treatments |
ČSN EN 13687-2 | ||
| 220 | Products and systems for repair of concrete structures | Determination of linear contraction Regulated area: 11 Paints and surface treatments |
ČSN EN 12617-1 | ||
| 221 | Products and systems for repair of concrete structures | Determination of volumetric contraction of products based on polymers Regulated area: 11 Paints and surface treatments |
ČSN EN 12617-2 | ||
| 222 | Coating materials and coating systems | Determination of crack bridging ability Regulated area: 11 Paints and surface treatments |
ČSN EN 1062-7, metoda B | ||
| 223 | Floor screeds based on calcium sulphate | Determination of dimensional changes Regulated area: 11 Paints and surface treatments |
ČSN EN 13872 | ||
| 224 | Binders for floor screeds based on calcium sulphate | Compression strength Regulated area: 11 Paints and surface treatments |
ČSN EN 13454-2, čl. 4.4 | ||
| 225 | Binders for floor screeds based on calcium sulphate | Determination of normal consistence Regulated area: 11 Paints and surface treatments |
ČSN EN 13454-2, čl. 5.3 | ||
| 226 | Binders for floor screeds based on calcium sulphate | Determination of bending strength Regulated area: 11 Paints and surface treatments |
ČSN EN 13454-2, čl. 5.4 | ||
| 227 | Binders for floor screeds based on calcium sulphate | Determination of dimensional changes Regulated area: 11 Paints and surface treatments |
ČSN EN 13454-2, čl. 5.5 | ||
| 228 | Mortars | Frost resistance test Regulated area: 12 Mortar, cement |
ČSN 72 2452 | ||
| 229 | Fresh mortar | Determination of volume weight Regulated area: 12 Mortar, cement |
ČSN EN 1015-6 | ||
| 230 | Fresh mortar | Determination of workable life Regulated area: 12 Mortar, cement |
ČSN EN 13454-2, čl. 5.6 | ||
| 231 | Hardened mortar | Determination of water vapour transmission properties Regulated area: 12 Mortar, cement |
ČSN EN 1015-19 | ||
| 232 | Hardened mortar | Determination of bending tensile strength Regulated area: 12 Mortar, cement |
ČSN EN 1015-11, čl. 8 | ||
| 233 | Hardened mortar | Compression strength Regulated area: 12 Mortar, cement |
ČSN EN 1015-11, čl. 9 | ||
| 234 | Hardened mortar | Determination of volume weight Regulated area: 12 Mortar, cement |
ČSN EN 1015-10 | ||
| 235 | Repair mortar | Compression strength Regulated area: 12 Mortar, cement |
ČSN EN 12190 | ||
| 236 | Repair mortar for soffit surfaces | Determination of workability Regulated area: 12 Mortar, cement |
ČSN EN 13395-4 | ||
| 237 | Mortar for masonry | Determination of adhesion to substrates Regulated area: 12 Mortar, cement |
ČSN EN 1015-12 | ||
| 238 | Mortar for masonry | Determination of air content Regulated area: 12 Mortar, cement |
ČSN EN 1015-7 | ||
| 239 | Admixtures for concrete, mortar and grout | Determination of setting time Regulated area: 12 Mortar, cement |
ČSN EN 480-2 | ||
| 240 | Admixtures for concrete, mortar and grout | Fresh concrete test - separation of water Regulated area: 12 Mortar, cement |
ČSN EN 480-4 | ||
| 241 | Admixtures for concrete, mortar and grout | Determination of capillary absorption Regulated area: 12 Mortar, cement |
ČSN EN 480-5 | ||
| 242 | Admixtures for concrete, mortar and grout | Determination of dry content Regulated area: 12 Mortar, cement |
ČSN EN 480-8 | ||
| 243 | Grout | Determination of viscosity Regulated area: 12 Mortar, cement |
ČSN EN 445 | ||
| 244 | Grout and mortar | Determination of consistence, flow characteristics Regulated area: 12 Mortar, cement |
ČSN EN 13395-2 | ||
| 245 | Cement | Determination of compressive and tensile strength after bending Regulated area: 12 Mortar, cement |
ČSN EN 196-1 | ||
| 246 | Cement | Determination of normal consistency and setting time of cement Regulated area: 12 Mortar, cement |
ČSN EN 196-3, čl. 5.6 | ||
| 247 | Cement | Volume stability of cement determination Regulated area: 12 Mortar, cement |
ČSN EN 196-3, čl. 7 | ||
| 248 | Cement | Determination of aqueous heat by dissolvent method Regulated area: 12 Mortar, cement |
ČSN EN 196-8 | ||
| 249 | Grouts for ceramic tiles | Determination of bending tensile strength and compressive strength Regulated area: 12 Mortar, cement |
ČSN EN 13888-2, čl. 9.1 | ||
| 250 | Grouts for ceramic tiles | Determination of dimensional changes Regulated area: 12 Mortar, cement |
ČSN EN 13888-2, čl. 9.3 | ||
| 251 | Grouts for ceramic tiles | Determination of water absorption Regulated area: 12 Mortar, cement |
ČSN EN 13888-2, čl. 9.2 | ||
| 252 | Grouts for ceramic tiles | Determination of resistance to liquid chemicals Regulated area: 12 Mortar, cement |
ČSN EN 13888-2, čl. 9.5 | ||
| 253 | Screed materials | Determination of wear resistance by Böhme method Regulated area: 12 Mortar, cement |
ČSN EN 13892-3 | ||
| 254 | Screed materials | Determination of bending tensile strength and compressive strength Regulated area: 12 Mortar, cement |
ČSN EN 13892-2 | ||
| 255 | Screed materials | Determination of adhesion by tensile test Regulated area: 12 Mortar, cement |
ČSN EN 13892-8 | ||
| 256 | Floor screeds | Determination of bond strength Regulated area: 12 Mortar, cement |
ČSN EN 13408 | ||
| 257 | Floor screeds | Determination of setting time Regulated area: 12 Mortar, cement |
ČSN EN 13409 | ||
| 258 | Floor coverings | Determination of peel resistance Regulated area: 13 Floor coverings |
ČSN EN ISO 24345 | ||
| 259 | Floor coverings | Determination of dimensional changes Regulated area: 13 Floor coverings |
ČSN EN 14565, příloha C | ||
| 260 | Resilient floor coverings | Determination of the area mass Regulated area: 13 Floor coverings |
ČSN EN ISO 23997 | ||
| 261 | Wood flooring | Determination of resistance to sliding Regulated area: 13 Floor coverings |
ČSN P CEN/TS 15676 | ||
| 262 | Resilient and textile floor coverings | Determination of dimensions Regulated area: 13 Floor coverings |
ČSN EN ISO 24341; ČSN EN ISO 24342 | ||
| 263 | Resilient and textile floor coverings | Determination of thickness Regulated area: 13 Floor coverings |
ČSN EN ISO 24346; ČSN EN ISO 24340 | ||
| 264 | Resilient floor coverings | Determination of dimensional changes Regulated area: 13 Floor coverings |
ČSN EN 669 | ||
| 265 | Resilient floor coverings | Determination of dimensional changes Regulated area: 13 Floor coverings |
ČSN EN ISO 23999 | ||
| 266 | Resilient floor coverings | Determination of density by gravimetry method Regulated area: 13 Floor coverings |
ČSN EN ISO 23996 | ||
| 267 | Resilient floor coverings | Determination of water content Regulated area: 13 Floor coverings |
ČSN EN 12105 | ||
| 268 | Resilient floor coverings | Determination of wear resistance by Frick-Taber method Regulated area: 13 Floor coverings |
ČSN EN 660-2 | ||
| 269 | Surfaces for sports areas | Determination of vertical ball rebound Regulated area: 14 Playground and sports areas |
ČSN EN 12235; FIFA 01 | ||
| 270 | Surfaces for sports areas | Determination of ball roll Regulated area: 14 Playground and sports areas |
ČSN EN 12234; FIFA 03 | ||
| 271 | Surfaces for sports areas | Determination of shock absorption Regulated area: 14 Playground and sports areas |
ČSN EN 14808; FIFA 04 | ||
| 272 | Surfaces for sports areas | Determination of vertical deformation Regulated area: 14 Playground and sports areas |
ČSN EN 14809; FIFA 05 | ||
| 273 | Surfaces for sports areas | Determination of rotational resistance Regulated area: 14 Playground and sports areas |
ČSN EN 15301-1; FIFA 06 | ||
| 274 | Surfaces for sports areas | Determination of resistance to compression Regulated area: 14 Playground and sports areas |
ČSN EN 1516 | ||
| 275 | Surfaces for sports areas | Determination of resistance to impact Regulated area: 14 Playground and sports areas |
ČSN EN 1517 | ||
| 276 | Surfaces for sports areas | Determination of resistance to rolling load Regulated area: 14 Playground and sports areas |
ČSN EN 1569 | ||
| 277 | Surfaces for sports areas | Artificial ageing test Regulated area: 14 Playground and sports areas |
ČSN EN 14836 | ||
| 278 | Surfaces for sports areas | Determination of thickness of surface Regulated area: 14 Playground and sports areas |
ČSN EN 1969 | ||
| 279 | Surfaces for sports areas | Determination of water permeability Regulated area: 14 Playground and sports areas |
ČSN EN 12616 | ||
| 280 | Surfaces for sports areas | Determination of tensile characteristic Regulated area: 14 Playground and sports areas |
ČSN EN 12230 | ||
| 281 | Surfaces for sports areas | Determination of joint strength Regulated area: 14 Playground and sports areas |
ČSN EN 12228 | ||
| 282 | Surfaces for sports areas | Determination of artificial ageing by procedure for accelerated ageing by exposure to hot air Regulated area: 14 Playground and sports areas |
ČSN EN 13817 | ||
| 283 | Surfaces for sports areas | Determination of dimensional changes Regulated area: 14 Playground and sports areas |
ČSN EN 13746 | ||
| 284 | Surfaces for sports areas | Determination of flatness Regulated area: 14 Playground and sports areas |
ČSN EN 13036-7 | ||
| 285 | Surfaces for sports areas | Determination of anti-slip surface properties – test by pendulum Regulated area: 14 Playground and sports areas |
ČSN EN 13036-4 | ||
| 286 | Playground equipment | Determination of geometric and physical properties Regulated area: 14 Playground and sports areas |
ČSN EN 1176-1 ed. 2:2018, čl. 4.2.3, 4.2.4, 4.2.7 až 4.2.9, 4.2.12, 4.2.13, příloha D; ČSN EN 1176-1 ed. 2+A1, čl. 4.2.3, 4.2.4, 4.2.7 až 4.2.9, 4.2.12, 4.2.13, příloha D; ČSN EN 1176-2 ed. 2, čl. 4.2 až 4.5, 4.7, 4.9, 4.10, 5, příloha C; ČSN EN 1176-3 ed. 2; ČSN EN 1176-4 ed. 2, čl. 4.4 až 4.8, 4.10 až 4.14, příloha A, příloha B; ČSN EN 1176-5, čl. 4.2 až 4.5, 5.1, 5.2, 5.3.1, 5.4 až 5.7; ČSN EN 1176-6 ed.2, čl. 4.2 až 4.11, 5.1 až 5.4, příloha B, C, D, E | ||
| 287 | Fresh concrete | Determination of volume weight Regulated area: 15 Concrete and concrete products |
ČSN EN 12350-6 | ||
| 288 | Fresh concrete | Determination of consistence – slump test Regulated area: 15 Concrete and concrete products |
ČSN EN 12350-2 | ||
| 289 | Fresh concrete | Determination of consistence – VEBE test Regulated area: 15 Concrete and concrete products |
ČSN EN 12350-3 | ||
| 290 | Fresh concrete | Determination of consistence - degree of compactability Regulated area: 15 Concrete and concrete products |
ČSN EN 12350-4 | ||
| 291 | Fresh concrete | Determination of consistence - flow table test Regulated area: 15 Concrete and concrete products |
ČSN EN 12350-5 | ||
| 292 | Fresh concrete | Determination of air content Regulated area: 15 Concrete and concrete products |
ČSN EN 12350-7 | ||
| 293 | Hardened concrete | Compression strength Regulated area: 15 Concrete and concrete products |
ČSN EN 12390-3 | ||
| 294 | Hardened concrete | Determination of bending strength Regulated area: 15 Concrete and concrete products |
ČSN EN 12390-5 | ||
| 295 | Hardened concrete | Determination of tensile strength of surface layers Regulated area: 15 Concrete and concrete products |
ČSN 73 1318, příloha 2 | ||
| 296 | Hardened concrete | Determination of dimensions Regulated area: 15 Concrete and concrete products |
ČSN EN 12390-1 | ||
| 297 | Hardened concrete | Determination of volume weight Regulated area: 15 Concrete and concrete products |
ČSN EN 12390-7 | ||
| 298 | Hardened concrete | Waterproofing determination Regulated area: 15 Concrete and concrete products |
ČSN EN 12390-8 | ||
| 299 | Hardened concrete | Determination of frost resistance Regulated area: 15 Concrete and concrete products |
ČSN 73 1322 | ||
| 300 | Concrete | Non-destructive testing Regulated area: 15 Concrete and concrete products |
ČSN 73 1373 | ||
| 301 | Concrete | Determination of grindability Regulated area: 15 Concrete and concrete products |
ČSN 73 1324 | ||
| 302 | Lintels | Determination of bending strength/shear Regulated area: 15 Concrete and concrete products |
ČSN EN 846-9 ed.2 | ||
| 303 | Concrete pipes and fittings | Determination of bending strength Regulated area: 15 Concrete and concrete products |
ČSN EN 1916 | ||
| 304 | Concrete paving blocks | Determination of grindability by the Böhme method Regulated area: 15 Concrete and concrete products |
ČSN EN 1338, příloha H | ||
| 305 | Concrete paving flags | Determination of grindability by the Böhme method Regulated area: 15 Concrete and concrete products |
ČSN EN 1339, příloha H | ||
| 306 | Concrete paving blocks | Compression strength Regulated area: 15 Concrete and concrete products |
ČSN EN 1338, příloha F | ||
| 307 | Concrete paving blocks | Determination of water absorption Regulated area: 15 Concrete and concrete products |
ČSN EN 1338, příloha E | ||
| 308 | Concrete paving blocks | Determination of dimensions Regulated area: 15 Concrete and concrete products |
ČSN EN 1338, příloha C | ||
| 309 | Concrete paving blocks | Determination of resistance to water and CHRL Regulated area: 15 Concrete and concrete products |
ČSN EN 1338, příloha D | ||
| 310 | Concrete paving flags | Determination of resistance to sliding Regulated area: 15 Concrete and concrete products |
ČSN EN 1339, příloha I | ||
| 311 | Concrete paving flags | Determination of water absorption Regulated area: 15 Concrete and concrete products |
ČSN EN 1339, příloha E | ||
| 312 | Concrete paving flags | Determination of dimensions Regulated area: 15 Concrete and concrete products |
ČSN EN 1339, příloha C | ||
| 313 | Concrete paving flags | Determination of resistance to water and CHRL Regulated area: 15 Concrete and concrete products |
ČSN EN 1339, příloha D | ||
| 314 | Concrete paving flags | Determination of bending tensile strength Regulated area: 15 Concrete and concrete products |
ČSN EN 1339, příloha F | ||
| 315 | Concrete sleepers | Determination of wear resistance by Frick-Taber method Regulated area: 15 Concrete and concrete products |
ČSN EN 13230-1, příloha A | ||
| 316 | Building components | Determination of dimensions Regulated area: 15 Concrete and concrete products |
ČSN 73 0212-5 | ||
| 317 | Concrete structures | Non-destructive testing of concrete Regulated area: 15 Concrete and concrete products |
ČSN EN 12504-2 | ||
| 318 | Concrete products | Determination of resistance to water and CHRL Regulated area: 15 Concrete and concrete products |
ČSN 73 1326 | ||
| 319 | Levelling layers, concrete, mortar, sealing and insulating layers | Determination of adhesion to substrates Regulated area: 15 Concrete and concrete products |
ČSN 73 6242, příloha B | ||
| 320 | Masonry units | Determination of bending tensile strength Regulated area: 16 Masonry units |
ČSN EN 772-6 | ||
| 321 | Masonry units | Compression strength Regulated area: 16 Masonry units |
ČSN EN 772-1+A1 | ||
| 322 | Masonry units | Determination of dimensions Regulated area: 16 Masonry units |
ČSN EN 772-16 | ||
| 323 | Masonry units | Determination of flatness of faces Regulated area: 16 Masonry units |
ČSN EN 772-20 | ||
| 324 | Masonry units | Determination of volume weight Regulated area: 16 Masonry units |
ČSN EN 772-13 | ||
| 325 | Masonry units | Determination of water absorption Regulated area: 16 Masonry units |
ČSN EN 772-7; ČSN EN 772-11 | ||
| 326 | Masonry units | Determination of water content Regulated area: 16 Masonry units |
ČSN EN 772-10 | ||
| 327 | Masonry units | Determination of frost resistance Regulated area: 16 Masonry units |
ČSN EN 772-18 | ||
| 328 | Brick products | Determination of dimensions Regulated area: 16 Masonry units |
ČSN 72 2602 | ||
| 329 | Brick products | Determination of frost resistance Regulated area: 16 Masonry units |
ČSN 72 2601, příloha A | ||
| 330 | Autoclaved aerated concrete | Determination of dimensional changes Regulated area: 16 Masonry units |
ČSN 73 1356 | ||
| 331 | Autoclaved aerated concrete | Determination of volume weight Regulated area: 16 Masonry units |
ČSN EN 992 | ||
| 332 | Autoclaved aerated concrete | Determination of water content Regulated area: 16 Masonry units |
ČSN 73 1357 | ||
| 333 | Aggregates | Determination of particle shape - Shape index Regulated area: 17 Stone, aggregates, soil |
ČSN EN 933-4 | ||
| 334 | Aggregates | Determination of loose bulk density and voids Regulated area: 17 Stone, aggregates, soil |
ČSN EN 1097-3 | ||
| 335 | Aggregates | Determination of percentage of crushed particles Regulated area: 17 Stone, aggregates, soil |
ČSN EN 933-5 | ||
| 336 | Aggregates | Determination of water content Regulated area: 17 Stone, aggregates, soil |
ČSN EN 1097-5 | ||
| 337 | Small aggregates | Determination of Taber wear index Regulated area: 17 Stone, aggregates, soil |
ČSN EN 13230-1, příloha A | ||
| 338 | Aggregates, rubber crumb, PVC, granulate, slag, cinder, ash | Determination of particle size distribution Regulated area: 17 Stone, aggregates, soil |
ČSN EN 933-1 | ||
| 339 | Aggregate for hydraulic structures | Determination of particle shape - Shape index Regulated area: 17 Stone, aggregates, soil |
ČSN EN 13383-2, čl. 7 | ||
| 340 | Terrazzo tiles | Determination of bending tensile strength Regulated area: 17 Stone, aggregates, soil |
ČSN EN 13748-2, čl. 5.5 | ||
| 341 | Terrazzo tiles | Determination of dimensions Regulated area: 17 Stone, aggregates, soil |
ČSN EN 13748-2, čl. 5.2 až 5.4 | ||
| 342 | Terrazzo tiles | Determination of resistance to water and CHRL Regulated area: 17 Stone, aggregates, soil |
ČSN EN 13748-2, čl. 5.9 | ||
| 343 | Soil, loose materials | Determination of compaction by static load plate Regulated area: 17 Stone, aggregates, soil |
ČSN 72 1006, příloha A, B, D | ||
| 344 | Soil, loose materials | Determination of volume weight Regulated area: 17 Stone, aggregates, soil |
ČSN 72 1010, metoda A | ||
| 345 | Soil, loose materials | Determination of water content Regulated area: 17 Stone, aggregates, soil |
ČSN EN ISO 17892-1 | ||
| 346 | Soil, loose materials | Laboratory evaluation of soil compaction ability using - Proctor standard test Regulated area: 17 Stone, aggregates, soil |
ČSN EN 13286-2, čl. 7.1, 7.4 | ||
| 347 | Soil, loose materials | Determination of compaction by a light dynamic plate Regulated area: 17 Stone, aggregates, soil |
ČSN 73 6192, čl. 5.4, zařízení skupiny C | ||
| 348 | Wood based panels | Determination of modulus of elasticity in bending and of bending strength Regulated area: 18 Wood and wood products |
ČSN EN 310; ČSN EN 789, čl. 7 | ||
| 349 | Wood based panels | Determination of dimensional changes Regulated area: 18 Wood and wood products |
ČSN EN 318 | ||
| 350 | Wood based panels | Determination of density by gravimetry method Regulated area: 18 Wood and wood products |
ČSN EN 323 | ||
| 351 | Wood based panels | Determination of moisture resistance under cyclic test conditions Regulated area: 18 Wood and wood products |
ČSN EN 321 | ||
| 352 | Wood based panels | Determination of water content Regulated area: 18 Wood and wood products |
ČSN EN 322; ČSN EN 13183-1 | ||
| 353 | Wood | Determination of water content Regulated area: 18 Wood and wood products |
ČSN 49 0103 | ||
| 354 | Wood, sawn timber | Determination of dimensions Regulated area: 18 Wood and wood products |
ČSN EN 324-1; ČSN EN 324-2; ČSN EN 1309-1; ČSN EN 1309-2 | ||
| 355 | Round and sawn timber | Measurement and classification according to dimensions and defects Regulated area: 18 Wood and wood products |
ČSN EN 1309-3 | ||
| 356 | Wooden sleepers | Measurement and classification according to dimensions and defects Regulated area: 18 Wood and wood products |
ČSN EN 13145+A1, čl. 5, tab. 1 a 2 | ||
| 357 | Particleboards and fibreboards | Determination of stress-strain properties Regulated area: 18 Wood and wood products |
ČSN EN 319 | ||
| 358 | Particleboards and fibreboards | Determination of swelling after immersion in water Regulated area: 18 Wood and wood products |
ČSN EN 317 | ||
| 359 | Glued laminated timber and solid timber | Shear test of glued joints Regulated area: 18 Wood and wood products |
ČSN EN 14080, příloha D | ||
| 360 | Glued laminated timber and solid timber | Bending tests Regulated area: 18 Wood and wood products |
ČSN EN 14080, příloha F | ||
| 361 | Wood for building structures | Visual classification Regulated area: 18 Wood and wood products |
ČSN 73 2824-1 | ||
| 362 | Structural timber and glued laminated timber | Determination of dimensions Regulated area: 18 Wood and wood products |
ČSN EN 408+A1, čl. 5 | ||
| 363 | Structural timber and glued laminated timber | Determination of density Regulated area: 18 Wood and wood products |
ČSN EN 408+A1, čl. 7 | ||
| 364 | Structural timber and glued laminated timber | Determination of the local modulus of elasticity in bending Regulated area: 18 Wood and wood products |
ČSN EN 408+A1, čl. 9 | ||
| 365 | Structural timber and glued laminated timber | Determination of global modulus of elasticity in bending Regulated area: 18 Wood and wood products |
ČSN EN 408+A1, čl. 10 | ||
| 366 | Structural timber and glued laminated timber | Determination of modulus of elasticity in shear Regulated area: 18 Wood and wood products |
ČSN EN 408+A1, čl. 11.2 | ||
| 367 | Structural timber and glued laminated timber | Determination of bending strength Regulated area: 18 Wood and wood products |
ČSN EN 408+A1, čl. 19 | ||
| 368 | Structural timber and glued laminated timber | Determination of the tensile strength Regulated area: 18 Wood and wood products |
ČSN EN 408+A1, čl. 13,16 | ||
| 369 | Structural timber and glued laminated timber | Compression strength Regulated area: 18 Wood and wood products |
ČSN EN 408+A1, čl. 15,16 | ||
| 370 | Structural timber and glued laminated timber | Determination of shear strength Regulated area: 18 Wood and wood products |
ČSN EN 408+A1, čl. 18 | ||
| 371 | Laminated wood | Quality testing of bonding Regulated area: 18 Wood and wood products |
ČSN EN 14374, příloha B | ||
| 372 | Plywood | Quality testing of bonding Regulated area: 18 Wood and wood products |
ČSN EN 314-1 | ||
| 373 | Plywood, laths | Determination of shear strength Regulated area: 18 Wood and wood products |
ČSN EN 314-1 | ||
| 374 | Small wastewater treatment systems | Static loading test Regulated area: 19 Other construction products |
ČSN EN 12566-3, příloha C1, C2, C3, C4, C5 | ||
| 375 | Small wastewater treatment systems | Waterproofing determination Regulated area: 19 Other construction products |
ČSN EN 12566-1 ed.2, příloha A; ČSN EN 12566-3, čl. 6.4, příloha A | ||
| 376 | Gully tops and manhole tops for vehicular and pedestrian areas | Determination of permanent deformation Regulated area: 19 Other construction products |
ČSN EN 124-1, čl. 8.2 | ||
| 377 | Gully tops and manhole tops for vehicular and pedestrian areas | Test of load bearing capacity Regulated area: 19 Other construction products |
ČSN EN 124-1, čl. 8.3 | ||
| 378 | Gully tops and manhole tops for vehicular and pedestrian areas | Measurement of design parameters Regulated area: 19 Other construction products |
ČSN EN 124-1, čl. 8.4, 8.5 | ||
| 379 | Gully tops and manhole tops for vehicular and pedestrian areas | Determination of deformation under force Regulated area: 19 Other construction products |
ČSN EN 124-3, čl. 6.2 | ||
| 380 | Road surfaces | Determination of road surface macrotexture depth Regulated area: 19 Other construction products |
ČSN EN 13036-1 | ||
| 381 | Fired roofing tiles | Determination of frost resistance Regulated area: 19 Other construction products |
ČSN EN 539-2 | ||
| 382 | Building products | Determination of combustion heat by calorimetric method Regulated area: 19 Other construction products |
ČSN EN ISO 1716, mimo čl. 7.10 | ||
| 383 | Building materials and products | Determination of water-vapour transmission properties - Cup method Regulated area: 19 Other construction products |
ČSN EN ISO 12572 | ||
| 384 | Building materials and products | Determination of water content Regulated area: 19 Other construction products |
ČSN EN ISO 12570 | ||
| 385 | Porous inorganic materials treated or untreated with hydrophobizing preparations | Determination of water absorption Regulated area: 19 Other construction products |
ČSN EN 15801; ČSN EN 16581, čl. 10.1, 10.2 | ||
| 386 | Porous inorganic materials treated or untreated with hydrophobizing preparations | Waterproofing determination Regulated area: 19 Other construction products |
ČSN EN 16302; ČSN EN 16581, čl. 10.7, 10.8 | ||
| 387 | Porous inorganic materials treated or untreated with hydrophobizing preparations | Determination of water vapour diffusion coefficient Regulated area: 19 Other construction products |
ČSN EN 15803; ČSN EN 16581, čl. 10.3, 10.4 | ||
| 388 | Textiles, floor coverings, paints, varnishes, surfaces for sports areas, rubber granules, wood products | Determination of abrasion resistance Regulated area: 19 Other construction products |
ČSN EN ISO 5470-1 | ||
| Building testing laboratory (K Cihelně 304) | |||||
| 389 | Building structures, doors and windows | Measurement of airborne sound insulation Regulated area: 2 Acoustics tests |
ČSN EN ISO 10140-1; ČSN EN ISO 10140-2; ČSN EN ISO 10140-4; ČSN EN ISO 717-1; ASTM E413; ASTM E1332; ČSN EN ISO 16283-1 | ||
| 390 | Perimeter building structures and their parts | Measurement of airborne sound insulation Regulated area: 2 Acoustics tests |
ČSN EN ISO 16283-3; ČSN EN ISO 717-1 | ||
| 391 | Anti-noise panels and walls | Measurement of airborne sound insulation Regulated area: 2 Acoustics tests |
ČSN EN 1793-2; ČSN EN 16272-2; ČSN EN 16272-3-1, čl. 6 | ||
| 392 | Anti-noise cabins | Determination of sound insulation performance Regulated area: 2 Acoustics tests |
ČSN EN ISO 11957, mimo čl. 6 | ||
| 393 | Anti-noise enclosures | Determination of sound insulation performance Regulated area: 2 Acoustics tests |
ČSN EN ISO 11546-1, mimo čl. 7.3; ČSN EN ISO 11546-2 | ||
| 394 | Floor structures | Measurement of impact sound insulation Regulated area: 2 Acoustics tests |
ČSN EN ISO 10140-1; ČSN EN ISO 10140-3; ČSN EN ISO 10140-4; ČSN EN ISO 16283-2; ČSN EN ISO 717-2 | ||
| 395 | Floors, floor coverings | Measurement of improvement of impact sound insulation of floors Regulated area: 2 Acoustics tests |
ČSN EN ISO 10140-1, příloha H; ČSN EN ISO 10140-3; ČSN EN ISO 10140-4; ČSN EN ISO 717-2 | ||
| 396 | Enclosed spaces and rooms | Measurement of reverberation time Regulated area: 2 Acoustics tests |
ČSN EN ISO 3382-2 | ||
| 397 | Sound absorbing materials and structures | Measurement of sound absorption Regulated area: 2 Acoustics tests |
ČSN EN ISO 354; ČSN EN ISO 11654 | ||
| 398 | Anti-noise panels and walls | Measurement of sound absorption Regulated area: 2 Acoustics tests |
ČSN EN 1793-1; ČSN EN 16272-1; ČSN EN 16272-3-1, čl. 5 | ||
| 399 | Insulating materials and pads | Determination of dynamic stiffness Regulated area: 2 Acoustics tests |
ČSN ISO 9052-1 | ||
| 400 | Doors and windows | Determination of resistance to wind load Regulated area: 3 Tests of doors and windows |
ČSN EN 12211; ČSN EN 1873+A1, čl. 6.5.1; ČSN EN 14963, čl. 6.4.1 | ||
| 401 | Doors and windows | Determination of resistance to wind load Regulated area: 3 Tests of doors and windows |
ČSN EN 12444 | ||
| 402 | Building structures, Building parts | Determination of resistance to wind load Regulated area: 3 Tests of doors and windows |
ČSN EN 1932 ed.2 | ||
| 403 | Doors and windows | Water tightness test Regulated area: 3 Tests of doors and windows |
ČSN EN 1873+A1, čl. 6.4; ČSN EN 14963, čl. 6.3 | ||
| 404 | Noise barriers | Determination of the resistance of noise barrier elements to wind load and snow removal operations Regulated area: 4 Statics tests |
ČSN EN 1794-1:2004, příloha A, E; ČSN EN 1794-1, příloha A, E | ||
| 405 | Noise barriers | Test of stone impact resistance of noise barrier elements Regulated area: 4 Statics tests |
ČSN EN 1794-1:2004, příloha C; ČSN EN 1794-1, příloha C | ||
| 406 | Noise barriers | Test of safety of noise barriers – risk of falling debris Regulated area: 4 Statics tests |
ČSN EN 1794-2:2004, příloha B; ČSN EN 1794-2, příloha B | ||
| 407 | Noise barriers | Determination of dead weight of elements Regulated area: 4 Statics tests |
ČSN EN 1794-1:2004, příloha B, čl. B.2.1, B.2.3; ČSN EN 1794-1, příloha B, čl. B.2.1, B.2.3 | ||
| 408 | Noise barriers | Determination of the effects of dead weight Regulated area: 4 Statics tests |
SZ-23-03 (ČSN EN 1794-1:2004, příloha B, čl. B.3.1, B.3.2; ČSN EN 1794-1, příloha B, čl. B.3.1, B.3.2) | ||
| 409 | Guard rails | Determination of mechanical resistance and stability – resistance to horizontal loads Regulated area: 4 Statics tests |
ČSN 74 3305, příloha B; SZ-23-04 (ČSN 73 2030) | ||
| 410 | Raised access floors | Vertical load resistance test Regulated area: 4 Statics tests |
ČSN EN 12825, čl. 5 | ||
| 411 | Hollow floors | Vertical load resistance test Regulated area: 4 Statics tests |
ČSN EN 13213, čl. 5 | ||
| 412 | Floating floors | Vertical load resistance test Regulated area: 4 Statics tests |
ČSN CEN/TS 13810-2, čl. 7, 8, 9.1 | ||
| 413 | Building structures | Load tests Regulated area: 4 Statics tests |
ČSN 73 2030 | ||
| 414 | Wooden structures | Load tests Regulated area: 4 Statics tests |
ČSN EN 380 | ||
Reference standards (507)
ASTM E1332
ASTM E413
DIN 18055:1981, čl. 3.4.3
FIFA 01
FIFA 03
FIFA 04
FIFA 05
FIFA 06
ISO 10291
ISO 1926
ISO 8302
SZ-23-01
SZ-23-02
SZ-23-03
SZ-23-04
návod k analyzátoru HELOX 4 KVSN - F
návod k analyzátoru HELOX 4 KVSN – F
ČSN 49 0103
ČSN 64 0181
ČSN 64 3211, čl. 18
ČSN 64 3211, čl. 19
ČSN 64 3211, čl. 25
ČSN 64 3211, čl. 29
ČSN 64 5405
ČSN 64 5432
ČSN 64 5444
ČSN 65 7061
ČSN 72 1006, příloha A, B, D
ČSN 72 1010, metoda A
ČSN 72 2452
ČSN 72 2601, příloha A
ČSN 72 2602
ČSN 73 0212-5
ČSN 73 0546
ČSN 73 1318, příloha 2
ČSN 73 1322
ČSN 73 1324
ČSN 73 1326
ČSN 73 1356
ČSN 73 1357
ČSN 73 1373
ČSN 73 2030
ČSN 73 2035
ČSN 73 2577
ČSN 73 2578
ČSN 73 2579
ČSN 73 2581
ČSN 73 2824-1
ČSN 73 6192, čl. 5.4, zařízení skupiny C
ČSN 73 6242, příloha B
ČSN 73 6242, příloha C
ČSN 74 3305, příloha B
ČSN 77 0332
ČSN CEN/TS 13810-2, čl. 7, 8, 9.1
ČSN EN 1015-10
ČSN EN 1015-11, čl. 8
ČSN EN 1015-11, čl. 9
ČSN EN 1015-12
ČSN EN 1015-19
ČSN EN 1015-6
ČSN EN 1015-7
ČSN EN 1026
ČSN EN 1027
ČSN EN 1062-3
ČSN EN 1062-7, metoda B
ČSN EN 1097-3
ČSN EN 1097-5
ČSN EN 1107-1
ČSN EN 1107-2
ČSN EN 1109
ČSN EN 1110
ČSN EN 1176-1 ed. 2+A1, čl. 4.2.3, 4.2.4, 4.2.7 až 4.2.9, 4.2.12, 4.2.13, příloha D
ČSN EN 1176-1 ed. 2:2018, čl. 4.2.3, 4.2.4, 4.2.7 až 4.2.9, 4.2.12, 4.2.13, příloha D
ČSN EN 1176-2 ed. 2, čl. 4.2 až 4.5, 4.7, 4.9, 4.10, 5, příloha C
ČSN EN 1176-3 ed. 2
ČSN EN 1176-4 ed. 2, čl. 4.4 až 4.8, 4.10 až 4.14, příloha A, příloha B
ČSN EN 1176-5, čl. 4.2 až 4.5, 5.1, 5.2, 5.3.1, 5.4 až 5.7
ČSN EN 1176-6 ed.2, čl. 4.2 až 4.11, 5.1 až 5.4, příloha B, C, D, E
ČSN EN 1191
ČSN EN 12004-2, čl. 8.1
ČSN EN 12004-2, čl. 8.2
ČSN EN 12004-2, čl. 8.3
ČSN EN 12004-2, čl. 8.4
ČSN EN 12004-2, čl. 8.5
ČSN EN 12004-2, čl. 8.6
ČSN EN 12046-1
ČSN EN 12046-2
ČSN EN 12085:2013
ČSN EN 12086
ČSN EN 12089
ČSN EN 12090
ČSN EN 12091:2013
ČSN EN 12105
ČSN EN 12114
ČSN EN 12153
ČSN EN 12155
ČSN EN 12179
ČSN EN 12188, čl. 8
ČSN EN 12190
ČSN EN 12211
ČSN EN 12228
ČSN EN 12230
ČSN EN 12234
ČSN EN 12235
ČSN EN 12310-1
ČSN EN 12310-2
ČSN EN 12311-1
ČSN EN 12311-2
ČSN EN 12316-1
ČSN EN 12316-2
ČSN EN 12317-1
ČSN EN 12317-2
ČSN EN 12350-2
ČSN EN 12350-3
ČSN EN 12350-4
ČSN EN 12350-5
ČSN EN 12350-6
ČSN EN 12350-7
ČSN EN 12390-1
ČSN EN 12390-3
ČSN EN 12390-5
ČSN EN 12390-7
ČSN EN 12390-8
ČSN EN 124-1, čl. 8.2
ČSN EN 124-1, čl. 8.3
ČSN EN 124-1, čl. 8.4, 8.5
ČSN EN 124-3, čl. 6.2
ČSN EN 12412-2
ČSN EN 12412-4
ČSN EN 12427
ČSN EN 12429
ČSN EN 12430
ČSN EN 12431:2013
ČSN EN 12444
ČSN EN 12453+A1
ČSN EN 12489
ČSN EN 12504-2
ČSN EN 12566-1 ed.2, příloha A
ČSN EN 12566-3, příloha C1, C2, C3, C4, C5
ČSN EN 12566-3, čl. 6.4, příloha A
ČSN EN 12592
ČSN EN 12593
ČSN EN 12604+A1
ČSN EN 12605:2001, čl. 5.1, 5.2
ČSN EN 12608-1+A1, čl. 6.1
ČSN EN 12608-1+A1, čl. 6.2
ČSN EN 12608-1+A1, čl. 6.3
ČSN EN 12615
ČSN EN 12616
ČSN EN 12617-1
ČSN EN 12617-2
ČSN EN 12617-4
ČSN EN 12636
ČSN EN 12636, čl. 5
ČSN EN 12664
ČSN EN 12667
ČSN EN 12691
ČSN EN 12706
ČSN EN 12730
ČSN EN 1279-1, čl. 6.3
ČSN EN 1279-2
ČSN EN 1279-2, čl. 6.3
ČSN EN 1279-3, čl. 6.1, 6.2.1
ČSN EN 1279-6, příloha K
ČSN EN 1279-6, čl. B.4
ČSN EN 12825, čl. 5
ČSN EN 12846-1
ČSN EN 12846-2
ČSN EN 12865
ČSN EN 12939
ČSN EN 1296
ČSN EN 1297
ČSN EN 13036-1
ČSN EN 13036-4
ČSN EN 13036-7
ČSN EN 13049
ČSN EN 13051
ČSN EN 13057
ČSN EN 13075-1
ČSN EN 1309-1
ČSN EN 1309-2
ČSN EN 1309-3
ČSN EN 13111
ČSN EN 13145+A1, čl. 5, tab. 1 a 2
ČSN EN 13165+A2, čl. 5.3.3
ČSN EN 13183-1
ČSN EN 13213, čl. 5
ČSN EN 13230-1, příloha A
ČSN EN 13286-2, čl. 7.1, 7.4
ČSN EN 13294
ČSN EN 1338, příloha C
ČSN EN 1338, příloha D
ČSN EN 1338, příloha E
ČSN EN 1338, příloha F
ČSN EN 1338, příloha H
ČSN EN 13383-2, čl. 7
ČSN EN 1339, příloha C
ČSN EN 1339, příloha D
ČSN EN 1339, příloha E
ČSN EN 1339, příloha F
ČSN EN 1339, příloha H
ČSN EN 1339, příloha I
ČSN EN 13395-2
ČSN EN 13395-4
ČSN EN 13398
ČSN EN 13399
ČSN EN 13408
ČSN EN 13409
ČSN EN 13412
ČSN EN 13454-2, čl. 4.4
ČSN EN 13454-2, čl. 5.3
ČSN EN 13454-2, čl. 5.4
ČSN EN 13454-2, čl. 5.5
ČSN EN 13454-2, čl. 5.6
ČSN EN 13467:2019
ČSN EN 13469:2013
ČSN EN 13496
ČSN EN 13529
ČSN EN 13578
ČSN EN 13588
ČSN EN 13596
ČSN EN 13614
ČSN EN 13653
ČSN EN 13687-1
ČSN EN 13687-2
ČSN EN 13687-3
ČSN EN 13687-4
ČSN EN 13687-5
ČSN EN 13746
ČSN EN 13748-2, čl. 5.2 až 5.4
ČSN EN 13748-2, čl. 5.5
ČSN EN 13748-2, čl. 5.9
ČSN EN 13817
ČSN EN 13872
ČSN EN 13880-10
ČSN EN 13880-13
ČSN EN 13880-2
ČSN EN 13880-3
ČSN EN 13880-4
ČSN EN 13880-5
ČSN EN 13888-2, čl. 9.1
ČSN EN 13888-2, čl. 9.2
ČSN EN 13888-2, čl. 9.3
ČSN EN 13888-2, čl. 9.5
ČSN EN 13892-2
ČSN EN 13892-3
ČSN EN 13892-8
ČSN EN 13897
ČSN EN 14019
ČSN EN 14080, příloha D
ČSN EN 14080, příloha F
ČSN EN 14223
ČSN EN 14224
ČSN EN 1426
ČSN EN 1427
ČSN EN 1428
ČSN EN 1429
ČSN EN 14374, příloha B
ČSN EN 14498
ČSN EN 14565, příloha C
ČSN EN 14608
ČSN EN 14609
ČSN EN 1465
ČSN EN 14691
ČSN EN 14693
ČSN EN 14808
ČSN EN 14809
ČSN EN 14836
ČSN EN 14891 ed. 2, příloha A.7
ČSN EN 14963, čl. 6.3
ČSN EN 14963, čl. 6.4.1
ČSN EN 14963, čl. 6.4.2.1, 6.4.2.2
ČSN EN 1516
ČSN EN 1517
ČSN EN 15301-1
ČSN EN 1542
ČSN EN 1569
ČSN EN 15801
ČSN EN 15803
ČSN EN 15812
ČSN EN 15820
ČSN EN 16005+A1
ČSN EN 1602:2013
ČSN EN 1603
ČSN EN 1604
ČSN EN 1605
ČSN EN 1607
ČSN EN 16272-1
ČSN EN 16272-2
ČSN EN 16272-3-1, čl. 5
ČSN EN 16272-3-1, čl. 6
ČSN EN 16302
ČSN EN 16581, čl. 10.1, 10.2
ČSN EN 16581, čl. 10.3, 10.4
ČSN EN 16581, čl. 10.7, 10.8
ČSN EN 1770
ČSN EN 1793-1
ČSN EN 1793-2
ČSN EN 1794-1, příloha A, E
ČSN EN 1794-1, příloha B, čl. B.2.1, B.2.3
ČSN EN 1794-1, příloha B, čl. B.3.1, B.3.2
ČSN EN 1794-1, příloha C
ČSN EN 1794-1:2004, příloha A, E
ČSN EN 1794-1:2004, příloha B, čl. B.2.1, B.2.3
ČSN EN 1794-1:2004, příloha B, čl. B.3.1, B.3.2
ČSN EN 1794-1:2004, příloha C
ČSN EN 1794-2, příloha B
ČSN EN 1794-2:2004, příloha B
ČSN EN 1799
ČSN EN 1847
ČSN EN 1848-1
ČSN EN 1848-2
ČSN EN 1849-1, čl. 4
ČSN EN 1849-1, čl. 5
ČSN EN 1849-2, čl. 5
ČSN EN 1849-2, čl. 6
ČSN EN 1850-1
ČSN EN 1850-2
ČSN EN 1873+A1, čl. 6.4
ČSN EN 1873+A1, čl. 6.5.1
ČSN EN 1873+A1, čl. 6.5.2
ČSN EN 1873+A1, čl. 6.7
ČSN EN 1876-1
ČSN EN 1916
ČSN EN 1928
ČSN EN 1931
ČSN EN 1932 ed.2
ČSN EN 1946-2
ČSN EN 1946-4
ČSN EN 196-1
ČSN EN 196-3, čl. 5.6
ČSN EN 196-3, čl. 7
ČSN EN 196-8
ČSN EN 1969
ČSN EN 205
ČSN EN 28510-1
ČSN EN 302-1
ČSN EN 310
ČSN EN 314-1
ČSN EN 317
ČSN EN 318
ČSN EN 319
ČSN EN 321
ČSN EN 322
ČSN EN 323
ČSN EN 324-1
ČSN EN 324-2
ČSN EN 380
ČSN EN 408+A1, čl. 10
ČSN EN 408+A1, čl. 11.2
ČSN EN 408+A1, čl. 13,16
ČSN EN 408+A1, čl. 15,16
ČSN EN 408+A1, čl. 18
ČSN EN 408+A1, čl. 19
ČSN EN 408+A1, čl. 5
ČSN EN 408+A1, čl. 7
ČSN EN 408+A1, čl. 9
ČSN EN 445
ČSN EN 478
ČSN EN 479
ČSN EN 480-2
ČSN EN 480-4
ČSN EN 480-5
ČSN EN 480-8
ČSN EN 495-5
ČSN EN 514
ČSN EN 534+A1
ČSN EN 539-2
ČSN EN 544 ed.2
ČSN EN 544 ed.2, čl. 6.2
ČSN EN 544 ed.2, čl. 6.3
ČSN EN 544 ed.2, čl. 6.4.3
ČSN EN 544 ed.2, čl. 6.4.5
ČSN EN 660-2
ČSN EN 669
ČSN EN 673
ČSN EN 674
ČSN EN 772-1+A1
ČSN EN 772-10
ČSN EN 772-11
ČSN EN 772-13
ČSN EN 772-16
ČSN EN 772-18
ČSN EN 772-20
ČSN EN 772-6
ČSN EN 772-7
ČSN EN 789, čl. 7
ČSN EN 822:2013
ČSN EN 823
ČSN EN 824
ČSN EN 825:2013
ČSN EN 826:2013
ČSN EN 846-9 ed.2
ČSN EN 927-5
ČSN EN 933-1
ČSN EN 933-4
ČSN EN 933-5
ČSN EN 947
ČSN EN 948
ČSN EN 949
ČSN EN 950
ČSN EN 951
ČSN EN 952
ČSN EN 992
ČSN EN ISO 10140-1
ČSN EN ISO 10140-1, příloha H
ČSN EN ISO 10140-2
ČSN EN ISO 10140-3
ČSN EN ISO 10140-4
ČSN EN ISO 10319
ČSN EN ISO 10563
ČSN EN ISO 10590
ČSN EN ISO 10591
ČSN EN ISO 11339
ČSN EN ISO 11431
ČSN EN ISO 11432
ČSN EN ISO 11546-1, mimo čl. 7.3
ČSN EN ISO 11546-2
ČSN EN ISO 11654
ČSN EN ISO 11957, mimo čl. 6
ČSN EN ISO 12236
ČSN EN ISO 12567-1
ČSN EN ISO 12567-2
ČSN EN ISO 12570
ČSN EN ISO 12572
ČSN EN ISO 12628
ČSN EN ISO 12629
ČSN EN ISO 13433
ČSN EN ISO 15148
ČSN EN ISO 16283-1
ČSN EN ISO 16283-2
ČSN EN ISO 16283-3
ČSN EN ISO 16535
ČSN EN ISO 16546
ČSN EN ISO 1716, mimo čl. 7.10
ČSN EN ISO 17178, čl. 4.2
ČSN EN ISO 17178, čl. 4.3
ČSN EN ISO 17178, čl. 4.4
ČSN EN ISO 175
ČSN EN ISO 178
ČSN EN ISO 17892-1
ČSN EN ISO 1798
ČSN EN ISO 1856
ČSN EN ISO 1923
ČSN EN ISO 22631
ČSN EN ISO 22632
ČSN EN ISO 22633
ČSN EN ISO 22635
ČSN EN ISO 2286-3
ČSN EN ISO 23996
ČSN EN ISO 23997
ČSN EN ISO 23999
ČSN EN ISO 2409
ČSN EN ISO 2431
ČSN EN ISO 24340
ČSN EN ISO 24341
ČSN EN ISO 24342
ČSN EN ISO 24345
ČSN EN ISO 24346
ČSN EN ISO 2439
ČSN EN ISO 2808, čl. 4.2.4, 4.3, 5.3, 5.5.6, 5.5.7, 5.8.4, 5.4.4
ČSN EN ISO 2812-1
ČSN EN ISO 2812-2
ČSN EN ISO 29465
ČSN EN ISO 29466
ČSN EN ISO 29468
ČSN EN ISO 29469
ČSN EN ISO 29470
ČSN EN ISO 29767
ČSN EN ISO 29768
ČSN EN ISO 29770
ČSN EN ISO 3382-2
ČSN EN ISO 3386-1
ČSN EN ISO 3386-2
ČSN EN ISO 354
ČSN EN ISO 3838
ČSN EN ISO 4624
ČSN EN ISO 4892-3
ČSN EN ISO 5084
ČSN EN ISO 527-1
ČSN EN ISO 527-2
ČSN EN ISO 527-3
ČSN EN ISO 5470-1
ČSN EN ISO 604
ČSN EN ISO 62
ČSN EN ISO 6245
ČSN EN ISO 6270-1
ČSN EN ISO 6272-1
ČSN EN ISO 717-1
ČSN EN ISO 717-2
ČSN EN ISO 7389
ČSN EN ISO 7390
ČSN EN ISO 7783
ČSN EN ISO 8339
ČSN EN ISO 8340
ČSN EN ISO 844
ČSN EN ISO 845
ČSN EN ISO 8510-2
ČSN EN ISO 8990
ČSN EN ISO 9046
ČSN EN ISO 9047
ČSN EN ISO 9073-1
ČSN EN ISO 9073-2
ČSN EN ISO 9863-1
ČSN EN ISO 9864
ČSN ISO 9052-1
ČSN P CEN/TS 15676