💧 Textiles: resistance to water penetration — hydrostatic pressure test, pressure increase 10 or 60 cm H2O/min, area 100 cm², water at 20 °C or 27 °C, result at penetration in the third place; PN-EN ISO 811
In short
Hydrostatic pressure method for determining the resistance of textile fabrics to penetration by water, applicable to all fabrics intended to be water resistant — with or without a water-resistant or water-repellent finish. The test is performed according to PN-EN ISO 811:2018-07 (English version; implements EN ISO 811:2018 and ISO 811:2018 [IDT]); STATUS (as of 19.11.2026): PKN card: PN-EN ISO 811:2018-07 “Płaskie wyroby włókiennicze -- Wyznaczanie wodoszczelności -- Metoda ciśnienia hydrostatycznego” — English version (published 04-07-2018, 16 pages), KT 26 Textile Products, implements EN ISO 811:2018 and ISO 811:2018 [IDT], replaces PN-EN 20811:1997 (Polish version); the card gives no withdrawal date; the PKN search returns no Polish version. The procedure comprises 4 steps; it is used for: Fabrics intended to be water resistant — with or without a water-resistant or water-repellent finish (clause 1), Assessment of the behaviour of textile articles subjected to water pressure for short or moderate periods (clause 4), Quality control and barrier properties of protective clothing — with a statistical plan, e.g. according to ISO 2859-1 (9.4).
At a glance
- Standard: PN-EN ISO 811:2018-07 (English version; implements EN ISO 811:2018 and ISO 811:2018 [IDT])
- Category: Materials and NDT
- Procedure steps: 4
- STATUS (as of 19.11.2026): PKN card: PN-EN ISO 811:2018-07 “Płaskie wyroby włókiennicze -- Wyznaczanie wodoszczelności -- Metoda ciśnienia hydrostatycznego” — English version (published 04-07-2018, 16 pages), KT 26 Textile Products, implements EN ISO 811:2018 and ISO 811:2018 [IDT], replaces PN-EN 20811:1997 (Polish version); the card gives no withdrawal date; the PKN search returns no Polish version.
- Test area (6.1): 10 000 mm² (100 cm²)
- Rate of pressure increase (6.2): 10 cm H2O/min ± 0,5 cm H2O/min or 60 cm H2O/min ± 3 cm H2O/min
Overview
WHAT THE STANDARD COVERS. According to clause 1 of ISO 811:2018 the standard specifies a hydrostatic pressure method for determining the resistance of fabrics to penetration by water. The method is applicable to all types of fabrics intended to be water resistant, whether or not they have been given a water-resistant or water-repellent finish.
ACCORDING TO THE TEXT OF ISO 811:2018 (publisher's sample: contents, foreword, clauses 1–9.4). The standard was prepared by ISO/TC 38/SC 2 (cleansing, finishing and water resistance tests). The second edition replaces ISO 811:1981; changes: the first element of the title changed from “Textile fabrics” to “Textiles”, the scope clarifies that the method is intended for water-resistant fabrics, and major editorial changes were made. References: ISO 139 (standard atmospheres) and ISO 3696 (water for analytical laboratory use).
PRINCIPLE (clause 4). The hydrostatic head supported by a fabric is a measure of the opposition to the passage of water. The specimen is subjected, under standard conditions, to a steadily increasing water pressure on one side until penetration occurs in three places; the pressure at penetration in the third place is noted. The pressure may be applied from below or from above the specimen — the choice is stated in the report. The result is immediately relevant to the behaviour of articles subjected to water pressure for short or moderate periods.
REAGENT AND APPARATUS (clauses 5, 6). Grade 3 water according to ISO 3696, in contact with the specimen at 20 °C ± 2 °C or 27 °C ± 2 °C (choice in the report; the higher temperature gives lower hydrostatic head values). Fabric clamp: fabric horizontal, not bulging, area of 10 000 mm² (100 cm²) under increasing pressure from below or above, no leakage or slipping in the clamp, penetration at the clamped edge minimised (rubber facings recommended, sealing wax can help). Pressure increase: 10 cm H2O/min ± 0,5 cm H2O/min or 60 cm H2O/min ± 3 cm H2O/min (9,8 ± 0,5 or 58,8 ± 2,9 mbar H2O/min); results at different rates may differ, the higher rate is more applicable to fabrics with high water resistance. Manometer (non-electronic apparatus): up to 1 m H2O for fabrics similar to gabardines, up to 2 m H2O for closer constructions; with several testing heads — means for disconnecting them separately.
CONDITIONING AND SPECIMENS (clauses 7, 8). Conditioning and testing according to ISO 139, if agreed — at ambient temperature; vapours of volatile organic liquids (e.g. diethyl ether) in the laboratory can affect the results. At least five specimens from different places of the fabric so that they do not contain the same yarns; the fabric may be tested without cutting; areas with deep creases are not tested; the fabric is not ironed or sharply folded.
PROCEDURE (clause 9). Freshly distilled water for each specimen (cleaning the water surface in the head: refilling, overflowing and sweeping with a glass slide coated with paraffin wax, or overflowing only). The specimen is clamped with its face towards the water, without forcing water through before the start, and immediately subjected to increasing pressure with continuous observation. The pressure (cm or mbar of water) at which water appears in the third place is recorded; if agreed, the first drop can be reported. Recording accuracy (Table 1): below 1 m H2O — 0,5 cm H2O; from 1 m to 2 m — 1 cm H2O; above 2 m — 2 cm H2O. Very fine droplets that do not grow are not taken into account; subsequent drops at the same place count as one; tests with penetration at the clamp edge are rejected and further specimens are tested until reproducible results are obtained. For quality control or barrier claims for protective clothing a statistical sampling plan is recommended (e.g. ISO 2859-1). Clauses 10–11 (calculations, report) are outside the sample.
STATUS (as of 19.11.2026). PKN card: PN-EN ISO 811:2018-07 “Płaskie wyroby włókiennicze -- Wyznaczanie wodoszczelności -- Metoda ciśnienia hydrostatycznego” — English version (published 04-07-2018, 16 pages), KT 26 Textile Products, implements EN ISO 811:2018 and ISO 811:2018 [IDT], replaces PN-EN 20811:1997 (Polish version); the card gives no withdrawal date; the PKN search returns no Polish version.
Method principle
A fabric specimen with an area of 100 cm² is subjected to a steadily increasing water pressure (10 or 60 cm H2O/min) from below or above and observed until water penetrates in three places; the result is the hydrostatic head at penetration in the third place.
Applications
- Fabrics intended to be water resistant — with or without a water-resistant or water-repellent finish (clause 1)
- Assessment of the behaviour of textile articles subjected to water pressure for short or moderate periods (clause 4)
- Quality control and barrier properties of protective clothing — with a statistical plan, e.g. according to ISO 2859-1 (9.4)
Key parameters
| Parameter | Value |
|---|---|
| STATUS (as of 19.11.2026) | PKN card: PN-EN ISO 811:2018-07 “Płaskie wyroby włókiennicze -- Wyznaczanie wodoszczelności -- Metoda ciśnienia hydrostatycznego” — English version (published 04-07-2018, 16 pages), KT 26 Textile Products, implements EN ISO 811:2018 and ISO 811:2018 [IDT], replaces PN-EN 20811:1997 (Polish version); the card gives no withdrawal date; the PKN search returns no Polish version. |
| Test area (6.1) | 10 000 mm² (100 cm²) |
| Rate of pressure increase (6.2) | 10 cm H2O/min ± 0,5 cm H2O/min or 60 cm H2O/min ± 3 cm H2O/min |
| Water (5.1) | grade 3 according to ISO 3696; 20 °C ± 2 °C or 27 °C ± 2 °C |
| Specimens (clause 8) | at least 5, from different places of the fabric, not containing the same yarns; no deep creases |
| Result (9.3) | pressure at penetration in the third place (if agreed — first drop) |
| Recording accuracy (Table 1) | < 1 m H2O: 0,5 cm H2O; 1 m to 2 m: 1 cm H2O; > 2 m H2O: 2 cm H2O |
Standard
- Standard number
- PN-EN ISO 811:2018-07 (English version; implements EN ISO 811:2018 and ISO 811:2018 [IDT])
- Title (PL)
- Płaskie wyroby włókiennicze — Wyznaczanie wodoszczelności — Metoda ciśnienia hydrostatycznego
- Title (EN)
- Textiles — Determination of resistance to water penetration — Hydrostatic pressure test
Step-by-step procedure
-
Conditioning and specimens
Conditioning according to ISO 139; at least five specimens from different places of the fabric, without sharp folding or ironing (clauses 7, 8).
-
Water preparation
Freshly distilled water for each specimen; cleaning of the water surface in the head (9.1).
-
Clamping and loading
Clamping face towards the water without forcing water through before the test; immediate steady pressure increase and continuous observation (9.2).
-
Reading
Recording of the pressure at water appearance in the third place with the accuracy of Table 1; rejection of tests with penetration at the clamp edge (9.3, 9.4).
Required equipment and apparatus
| Equipment | Example | Indicative price |
|---|---|---|
| Fabric clamp (6.1) | Horizontal clamping without bulging, leakage or slipping; rubber facings, optionally sealing wax | — |
| Mechanism for increasing and measuring the water pressure (6.2) | Increase of 10 or 60 cm H2O/min | — |
| Manometer (6.3) | For non-electronic apparatus: up to 1 m H2O or up to 2 m H2O | — |
Reagents, media and consumables
| Reagent | CAS | Details |
|---|---|---|
| Grade 3 water according to ISO 3696 (5.1) | — | Freshly distilled for each specimen; 20 °C ± 2 °C or 27 °C ± 2 °C |
Frequently asked questions
Which standard describes this test?
The test is performed according to PN-EN ISO 811:2018-07 (English version; implements EN ISO 811:2018 and ISO 811:2018 [IDT]) — “Textiles — Determination of resistance to water penetration — Hydrostatic pressure test”.
How does this method work?
A fabric specimen with an area of 100 cm² is subjected to a steadily increasing water pressure (10 or 60 cm H2O/min) from below or above and observed until water penetrates in three places; the result is the hydrostatic head at penetration in the third place.
What is the measuring range and accuracy?
STATUS (as of 19.11.2026): PKN card: PN-EN ISO 811:2018-07 “Płaskie wyroby włókiennicze -- Wyznaczanie wodoszczelności -- Metoda ciśnienia hydrostatycznego” — English version (published 04-07-2018, 16 pages), KT 26 Textile Products, implements EN ISO 811:2018 and ISO 811:2018 [IDT], replaces PN-EN 20811:1997 (Polish version); the card gives no withdrawal date; the PKN search returns no Polish version.; Test area (6.1): 10 000 mm² (100 cm²); Rate of pressure increase (6.2): 10 cm H2O/min ± 0,5 cm H2O/min or 60 cm H2O/min ± 3 cm H2O/min; Water (5.1): grade 3 according to ISO 3696; 20 °C ± 2 °C or 27 °C ± 2 °C.
How long does the test take?
The procedure comprises 4 steps. The standard does not give a duration for every stage — the laboratory's own procedure decides.
What equipment is required?
Fabric clamp (6.1), Mechanism for increasing and measuring the water pressure (6.2), Manometer (6.3).
Where is this test used?
Fabrics intended to be water resistant — with or without a water-resistant or water-repellent finish (clause 1); Assessment of the behaviour of textile articles subjected to water pressure for short or moderate periods (clause 4); Quality control and barrier properties of protective clothing — with a statistical plan, e.g. according to ISO 2859-1 (9.4).
Which laboratory can perform this test?
The test is performed by laboratories accredited to ISO/IEC 17025. On LabCoda you can find them by the standard number PN-EN ISO 811.