📏 Surface texture by the profile method — complete specification operator and default settings: setting classes Sc1–Sc5, L-filter (λc 0,08–8 mm), evaluation length, S-filter (λs), sampling distance, tip radius, “max” acceptance rule; Ra, Rz, Rq, Rp, Rv, Rzx, Rt, Pt; PN-EN ISO 21920-3 (replaces ISO 4288)
In short
The complete specification operator for surface texture by the profile method: general settings (mechanical profile, direction, profile position, maximum tolerance acceptance rule, Gaussian filters) and default settings derived from the drawing specification — setting classes Sc1–Sc5 with tolerance limits for Ra, Rz, Rq, Rp, Rv, Rzx and Rt. The test is performed according to PN-EN ISO 21920-3:2022-06 (English version; implements EN ISO 21920-3:2022 and ISO 21920-3:2021 [IDT]); STATUS (read 17.11.2026): PN-EN ISO 21920-3:2022-06 (English version, published 21-06-2022); implements EN ISO 21920-3:2022 and ISO 21920-3:2021; replaces PN-EN ISO 4288:2011. The procedure comprises 4 steps; it is used for: Interpretation of roughness specifications from drawings (ISO 21920-1) and selection of settings for profile measurement (ISO 21920-3:2021, clause 4), Selection of λc, evaluation length, λs, sampling distance and tip radius for Ra, Rz, Rq, Rp, Rv, Rzx and Rt from the tolerance limit (tables 3 and 4), Replacement of the rules of ISO 4288:1996 (no distinction between periodic and non-periodic profiles, maximum rule as default).
At a glance
- Standard: PN-EN ISO 21920-3:2022-06 (English version; implements EN ISO 21920-3:2022 and ISO 21920-3:2021 [IDT])
- Category: Metrology
- Procedure steps: 4
- STATUS (read 17.11.2026): PN-EN ISO 21920-3:2022-06 (English version, published 21-06-2022); implements EN ISO 21920-3:2022 and ISO 21920-3:2021; replaces PN-EN ISO 4288:2011
- Replaces (foreword): ISO 4288:1996 with corrigendum Cor. 1:1998
- λc (Nic) Sc1–Sc5 (table 2): 0,08 / 0,25 / 0,8 / 2,5 / 8 mm
Overview
WHAT THE STANDARD COVERS. According to clause 1 of ISO 21920-3:2021 the standard specifies the complete specification operator for surface texture by profile methods. The introduction classifies it as a general GPS standard (ISO 14638) influencing chain link C of the chains of standards on profile surface texture; the fundamental GPS rules of ISO 8015 and the default decision rules of ISO 14253-1 apply, and the specification operators are specified according to ISO 17450-2.
ACCORDING TO THE TEXT OF ISO 21920-3:2021 (publisher's sample in English: table of contents, foreword, introduction, clauses 1–3 and clause 4 up to table 4; a second sample in French). The standard was prepared by ISO/TC 213 in collaboration with CEN/TC 290 (Vienna Agreement). The first edition cancels and replaces ISO 4288:1996 (technically revised) and incorporates the corrigendum ISO 4288:1996/Cor. 1:1998. Main changes according to the foreword: no distinction between periodic and non-periodic profiles; the basis for defaults is the drawing indication; the maximum tolerance acceptance rule is the default rule; for determining the profile position, surface defects are by default considered part of the specified surface. Normative references: ISO 21920-1 (indication), ISO 21920-2 (terms and parameters), ISO 16610-21 (linear profile filters — Gaussian filters) and ISO 16610-31 (robust filters — Gaussian regression). Definition (3.1): setting class Scn — identifier of default settings (Sc1 … Sc5) indicating the column of tables 2–6.
GENERAL SETTINGS (4.2–4.3, table 1). The complete specification operator comprises all operators required for an unambiguous specification; for profile surface texture it defines all setting elements. For R-parameters either the setting class or the L-filter nesting index shall be specified, for W-parameters either the setting class or the S-filter nesting index; for Ra, Rq, Rz, Rp, Rv, Rzx, Rt and Pt all default settings follow from the specified tolerance limit. General settings: mechanical profile; the direction yielding the maximum values of roughness height parameters (perpendicular to the dominant lay); profile position depending on the acceptance rule — with the maximum rule at the location where critical values can be expected (if it cannot be identified, traces are distributed equally), with the 16 % and median rules — uniformly over the whole surface; tolerance type — upper limit; S- and L-filters — Gaussian according to ISO 16610-21 (for Rk, Rpk, Rvk, Rpkx, Rvkx, Rmrk1, Rmrk2, Rak1, Rak2, Rpq, Rmq and Rvq — robust Gaussian filter, second order, according to ISO 16610-31); F-operator — association and removal of the form element by total least squares. Surface imperfections and defects are part of the specified surface — a change from ISO 4288. The standard describes specification operators; for verification, the verification operator is the physical implementation of the specification operator (ISO 8015:2011, 5.10.1). There are no defaults for electromagnetic profiles.
DEFAULT SETTINGS (4.4, tables 2–4). With several parameters in one symbol, the parameter in the first line determines the settings; for a nesting index Nis not listed in the tables, the maximum sampling distance dx = Nis/5. Setting classes Sc1–Sc5 (table 2): λc (Nic) 0,08 / 0,25 / 0,8 / 2,5 / 8 mm; evaluation length le 0,4 / 1,25 / 4 / 12,5 / 40 mm (for P-parameters — the length of the specified feature); λs (Nis) 2,5 / 2,5 / 2,5 / 8 / 25 µm; maximum sampling distance dx 0,5 / 0,5 / 0,5 / 1,5 / 5 µm; maximum nominal tip radius 2 / 2 / 2 / 5 / 10 µm; for section length parameters the section length lsc equals λc and there are 5 sections. For Ra, Rq, Rz, Rp, Rv, Rzx, Rt the class is selected from the upper tolerance limit U (table 3): e.g. for Ra — Sc1 at U ≤ 0,02 µm, Sc2 at 0,02 < U ≤ 0,1, Sc3 at 0,1 < U ≤ 2, Sc4 at 2 < U ≤ 10, Sc5 at U > 10 µm; for Rz — limits 0,16 / 0,8 / 16 / 80 µm; for Rt — 0,26 / 1,3 / 26 / 130 µm. With a bilateral tolerance the class is selected from the tolerance centre C = (U + L)/2 (table 4; for Ra — 0,016 / 0,08 / 1,6 / 8 µm). Further clauses according to the table of contents: settings for the lower tolerance limit and for Pt (4.4.5–4.4.6), default attributes and units of parameters from ISO 21920-2 (clauses 5–6), Annexes A–F (flowchart for determining operators, examples, changes from ISO 4288, settings in the absence of a specification, GPS matrix model) — the sample does not contain their text.
STATUS (read 17.11.2026). PKN card: PN-EN ISO 21920-3:2022-06 — English version, title “Specyfikacje geometrii wyrobów (GPS) -- Struktura geometryczna powierzchni: Profil -- Część 3: Operatory specyfikacji”, published 21-06-2022, 42 pages, KT 207 for Subtractive and Additive Machining and Surface Layer Characteristics, implements EN ISO 21920-3:2022 and ISO 21920-3:2021 [IDT], replaces PN-EN ISO 4288:2011; the card gives no withdrawal date. iTeh catalogue: ISO 21920-3:2021 — published 20-12-2021, stage 90.92 (International Standard to be revised).
Method principle
The roughness specification on the drawing (parameter, tolerance limit, possibly setting class Scn or filter index) unambiguously determines how to measure: the tolerance value indicates the class Sc1–Sc5, and the class gives the cut-off λc, the evaluation length, the λs filter, the sampling distance and the tip radius. Everything else (mechanical profile, direction perpendicular to the lay, maximum acceptance rule, Gaussian filters) follows from the general settings.
Applications
- Interpretation of roughness specifications from drawings (ISO 21920-1) and selection of settings for profile measurement (ISO 21920-3:2021, clause 4)
- Selection of λc, evaluation length, λs, sampling distance and tip radius for Ra, Rz, Rq, Rp, Rv, Rzx and Rt from the tolerance limit (tables 3 and 4)
- Replacement of the rules of ISO 4288:1996 (no distinction between periodic and non-periodic profiles, maximum rule as default)
- Calibration and checking of stylus instruments for roughness measurement at settings corresponding to classes Sc1–Sc5
Key parameters
| Parameter | Value |
|---|---|
| STATUS (read 17.11.2026) | PN-EN ISO 21920-3:2022-06 (English version, published 21-06-2022); implements EN ISO 21920-3:2022 and ISO 21920-3:2021; replaces PN-EN ISO 4288:2011 |
| Replaces (foreword) | ISO 4288:1996 with corrigendum Cor. 1:1998 |
| λc (Nic) Sc1–Sc5 (table 2) | 0,08 / 0,25 / 0,8 / 2,5 / 8 mm |
| Evaluation length le (table 2) | 0,4 / 1,25 / 4 / 12,5 / 40 mm |
| λs (Nis) (table 2) | 2,5 / 2,5 / 2,5 / 8 / 25 µm |
| Max. sampling distance dx (table 2) | 0,5 / 0,5 / 0,5 / 1,5 / 5 µm |
| Max. nominal tip radius (table 2) | 2 / 2 / 2 / 5 / 10 µm |
| Ra — limit U for Sc1…Sc5 (table 3) | ≤ 0,02; 0,02–0,1; 0,1–2; 2–10; > 10 µm |
| Rz — limit U for Sc1…Sc5 (table 3) | ≤ 0,16; 0,16–0,8; 0,8–16; 16–80; > 80 µm |
| Acceptance rule and filters (table 1) | maximum rule; Gaussian filters ISO 16610-21 (for Rk and related — robust Gaussian filter ISO 16610-31) |
Standard
- Standard number
- PN-EN ISO 21920-3:2022-06 (English version; implements EN ISO 21920-3:2022 and ISO 21920-3:2021 [IDT])
- Title (PL)
- Specyfikacje geometrii wyrobów (GPS) — Struktura geometryczna powierzchni: Profil — Część 3: Operatory specyfikacji
- Title (EN)
- Geometrical product specifications (GPS) — Surface texture: Profile — Part 3: Specification operators
Step-by-step procedure
-
Reading the specification
Parameter, type and value of the tolerance limit, acceptance rule and possibly setting class Scn or filter index from the drawing indication (ISO 21920-1); with several parameters — the parameter in the first line (4.4.1).
-
Selection of the setting class
For Ra, Rq, Rz, Rp, Rv, Rzx and Rt — from the upper limit U (table 3) or from the centre of a bilateral tolerance C = (U + L)/2 (table 4); for other R-parameters — from the specified Nic or Scn (table 2).
-
Measurement settings
λc, evaluation length, λs, maximum sampling distance and tip radius from the column of the selected class; direction perpendicular to the dominant lay, profile position according to the acceptance rule (table 1).
-
Evaluation
Calculation of the parameter after removal of form by least squares and Gaussian filtering; assessment according to the acceptance rule (by default maximum) — surface defects are part of the specified surface (4.3).
Required equipment and apparatus
| Equipment | Example | Indicative price |
|---|---|---|
| Stylus profile measuring instrument | Mechanical profile (table 1); nominal tip radius not greater than 2, 5 or 10 µm depending on the setting class (table 2) | — |
| Profile filters | Gaussian filter according to ISO 16610-21 (λs, λc); robust Gaussian filter, second order, according to ISO 16610-31 for Rk and related parameters | — |
Frequently asked questions
Which standard describes this test?
The test is performed according to PN-EN ISO 21920-3:2022-06 (English version; implements EN ISO 21920-3:2022 and ISO 21920-3:2021 [IDT]) — “Geometrical product specifications (GPS) — Surface texture: Profile — Part 3: Specification operators”.
How does this method work?
The roughness specification on the drawing (parameter, tolerance limit, possibly setting class Scn or filter index) unambiguously determines how to measure: the tolerance value indicates the class Sc1–Sc5, and the class gives the cut-off λc, the evaluation length, the λs filter, the sampling distance and the tip radius. Everything else (mechanical profile, direction perpendicular to the lay, maximum acceptance rule, Gaussian filters) follows from the general settings.
What is the measuring range and accuracy?
STATUS (read 17.11.2026): PN-EN ISO 21920-3:2022-06 (English version, published 21-06-2022); implements EN ISO 21920-3:2022 and ISO 21920-3:2021; replaces PN-EN ISO 4288:2011; Replaces (foreword): ISO 4288:1996 with corrigendum Cor. 1:1998; λc (Nic) Sc1–Sc5 (table 2): 0,08 / 0,25 / 0,8 / 2,5 / 8 mm; Evaluation length le (table 2): 0,4 / 1,25 / 4 / 12,5 / 40 mm.
How long does the test take?
The procedure comprises 4 steps. The standard does not give a duration for every stage — the laboratory's own procedure decides.
What equipment is required?
Stylus profile measuring instrument, Profile filters.
Where is this test used?
Interpretation of roughness specifications from drawings (ISO 21920-1) and selection of settings for profile measurement (ISO 21920-3:2021, clause 4); Selection of λc, evaluation length, λs, sampling distance and tip radius for Ra, Rz, Rq, Rp, Rv, Rzx and Rt from the tolerance limit (tables 3 and 4); Replacement of the rules of ISO 4288:1996 (no distinction between periodic and non-periodic profiles, maximum rule as default); Calibration and checking of stylus instruments for roughness measurement at settings corresponding to classes Sc1–Sc5.
Which laboratory can perform this test?
The test is performed by laboratories accredited to ISO/IEC 17025. On LabCoda you can find them by the standard number PN-EN ISO 21920-3.