📏 Charpy pendulum impact testing machines — direct verification (static: foundation, framework, pendulum, supports and anvils, indicating equipment) and indirect (dynamic) verification with reference test pieces according to ISO 148-3; 2 mm and 8 mm strikers; PN-EN ISO 148-2

Metrology PN-EN ISO 148-2

In short

Verification of pendulum impact testing machines for the Charpy test with a 2 mm or 8 mm striker, in terms of their constructional elements, overall performance and accuracy of results. The test is performed according to PN-EN ISO 148-2:2017-02 (English version; implements EN ISO 148-2:2016 and ISO 148-2:2016 [IDT]); STATUS (PKN card, 15.11.2026): PN-EN ISO 148-2:2017-02 (English version, published 07-02-2017); implements EN ISO 148-2:2016 and ISO 148-2:2016; replaces PN-EN ISO 148-2:2009. The procedure comprises 5 steps; it is used for: Industrial pendulum impact machines with a 2 mm or 8 mm striker, used e.g. in tests according to ISO 148-1 (ISO 148-2:2016, clause 1), Machines of various nominal energies and designs (clause 1), Reference machines — verified according to ISO 148-3, not this part (clause 1).

At a glance

  • Standard: PN-EN ISO 148-2:2017-02 (English version; implements EN ISO 148-2:2016 and ISO 148-2:2016 [IDT])
  • Category: Metrology
  • Procedure steps: 5
  • STATUS (PKN card, 15.11.2026): PN-EN ISO 148-2:2017-02 (English version, published 07-02-2017); implements EN ISO 148-2:2016 and ISO 148-2:2016; replaces PN-EN ISO 148-2:2009
  • Methods (clause 1): direct (static) and indirect (dynamic, reference test pieces according to ISO 148-3); compliance only after both
  • Energies (clause 3): K_T, K_P, K (KV₂, KV₈, KU₂, KU₈), K_calc, K_N, K_S, K_R

Overview

WHAT THE STANDARD COVERS. According to clause 1 of ISO 148-2:2016 the document covers the verification of pendulum impact testing machines in terms of their constructional elements, their overall performance and the accuracy of the results they produce; it applies to machines with a 2 mm or 8 mm striker used e.g. in tests according to ISO 148-1, of various capacities and designs. Machines for industrial, general and most research testing of metals are industrial machines; machines with more stringent requirements are reference machines, verified according to ISO 148-3. The standard describes two methods: the direct method, static in nature, i.e. measurement of the critical parts of the machine with instruments traceable to national or international standards, and the indirect method, dynamic in nature, i.e. verification of points on the absorbed energy scale with reference test pieces (requirements for them — ISO 148-3). A machine complies with the standard only when verified by both methods and meeting the requirements of clauses 6 and 7. The standard also shows the components of the total energy absorbed in breaking a test piece: the energy needed to break the test piece itself and the internal losses of the machine in the first half-swing (air resistance, friction of the axis bearings and of the pointer — determinable by the direct method, and shock of the foundation and vibration of the frame and pendulum — for which no suitable measuring methods exist). The PKN card of PN-EN ISO 148-2:2017-02 gives the same scope.

ACCORDING TO THE TEXT OF ISO 148-2:2016 (publisher's sample in English: contents, foreword, introduction, clauses 1–5 and clause 6 up to 6.3.8). The standard was prepared by ISO/TC 164 (Mechanical testing of metals), subcommittee SC 4; the third edition replaced the second (ISO 148-2:2008) after technical revision. The ISO 148 series has three parts: test method (part 1), verification of testing machines (part 2) and preparation and characterization of Charpy V-notch test pieces for indirect verification (part 3). The introduction explains the origin of the indirect method: two machines verified directly and meeting all dimensional requirements sometimes gave significantly different results for test pieces of the same material, so purchasers began to require verification of machines with reference test pieces. Terms (clause 3): total absorbed energy K_T (not corrected for losses), initial potential energy K_P (determined in direct verification), absorbed energy K (KV₂, KV₈, KU₂, KU₈ — V or U notch and striker radius), calculated energy K_calc, nominal energy K_N (assigned by the manufacturer), indicated energy K_S and reference absorbed energy K_R (certified value of the reference test pieces); the test piece dimensions were renamed — width W (formerly “height”), thickness B (formerly “width”) and length L. The machine consists (clause 5) of the foundation and installation, framework, pendulum with hammer, anvils and supports, and the absorbed energy indicating equipment (scale with friction pointer or electronic readout). Direct verification (clause 6) requires uncertainty estimates of the measurements; the uncertainty of dial gauges, micrometers, callipers and other commercial instruments is estimated once by the producer, and that of a method — in its validation. Foundation (6.2): documentation from the installation shall confirm that the mass of the foundation is not less than 40 times that of the pendulum; the bolts are checked for the torque specified by the manufacturer and the absence of external vibration transmitted through the foundation at the time of impact (e.g. a container of water on the frame — no ripples on the surface). Framework (6.3): free position of the pendulum, location of the pendulum relative to the supports, transverse and radial play of the bearings, clearance between hammer and framework; machines manufactured after 1998 have a reference plane; axis of rotation parallel to the reference plane within 2/1 000 (certified by the manufacturer), reference plane horizontal within 2/1 000, and without a reference plane the axis of rotation horizontal within 4/1 000; freely hanging pendulum — striking edge within 2,5 mm of the position of contact with the test piece (e.g. a gauge bar about 55 mm long with a 7,5 mm × 12,5 mm cross-section); plane of swing at 90,0° ± 0,1° to the axis of rotation (u < 0,05°); the striker contacts the test piece over its full thickness (e.g. a 55 mm × 10 mm × 10 mm test piece wrapped in paper and a striker wrapped in carbon paper); centre of the striker and centre of the gap between the anvils coincident within 0,5 mm (u < 0,1 mm); axial play of the pendulum bearings not greater than 0,25 mm (u < 0,05 mm) under a transverse force of about 4 % of the effective weight of the pendulum F_g, applied at the centre of strike. According to the table of contents the standard further covers the pendulum (6.4), anvils and supports (6.5), indicating equipment (6.6), indirect verification with reference test pieces — energy levels, requirements for test pieces, limited direct verification, bias and repeatability (clause 7) — frequency of verification (clause 8), report (clause 9) and uncertainty (clause 10, annexes A and B), and annex C describes verification of the machine geometry with a jig; the sample does not include the values of these parts — we do not give them here.

STATUS (PKN card, read 15.11.2026). PN-EN ISO 148-2:2017-02 — English version, Polish title “Metale -- Próba udarności sposobem Charpy'ego -- Część 2: Sprawdzanie młotów wahadłowych”, published 07-02-2017, 52 pages, KT 123 for Testing of Properties of Metals, implements EN ISO 148-2:2016 and ISO 148-2:2016 [IDT], replaces PN-EN ISO 148-2:2009 (English and German versions); the card gives no withdrawal date. iTeh catalogue (15.11.2026): ISO 148-2:2016 — published 12.10.2016, stage “International Standard to be revised” (90.92).

IN ACCREDITATION SCOPES (scope database of the service, read 15.11.2026, after loading the scopes of this batch). PN-EN ISO 148-2 appears at 4 Polish calibration laboratories (5 records) — always in the 2017-02 edition and alongside ASTM E23 (2025 or 2024 edition), at three also with PN-EN ISO 13802:2015-07 — and at 4 Czech laboratories.

Method principle

The pendulum impact machine is verified by two methods and complies with the standard only after both. Directly (statically) — by checking the foundation (mass ≥ 40 × mass of the pendulum, bolt torque, no vibration), the framework and position of the pendulum (levelness 2/1 000, striking edge within 2,5 mm of the test piece, plane of swing 90,0° ± 0,1°, centre of the striker within 0,5 mm of the centre of the gap, axial play ≤ 0,25 mm), the pendulum, supports, anvils and indicating equipment. Indirectly (dynamically) — by breaking reference test pieces prepared according to ISO 148-3 and comparing the indicated energy with the reference energy K_R.

Applications

Key parameters

ParameterValue
STATUS (PKN card, 15.11.2026)PN-EN ISO 148-2:2017-02 (English version, published 07-02-2017); implements EN ISO 148-2:2016 and ISO 148-2:2016; replaces PN-EN ISO 148-2:2009
Methods (clause 1)direct (static) and indirect (dynamic, reference test pieces according to ISO 148-3); compliance only after both
Energies (clause 3)K_T, K_P, K (KV₂, KV₈, KU₂, KU₈), K_calc, K_N, K_S, K_R
Foundation (6.2)mass ≥ 40 × mass of the pendulum; bolts torqued to the manufacturer's value; no external vibration
Levelness (6.3.2–6.3.3)axis of rotation ∥ reference plane 2/1 000; reference plane horizontal 2/1 000; without a plane — axis 4/1 000
Position of the pendulum (6.3.4–6.3.7)striking edge ≤ 2,5 mm from contact with the test piece; plane of swing 90,0° ± 0,1° (u < 0,05°); centre of the striker within 0,5 mm of the centre of the gap (u < 0,1 mm)
Axial play of the bearings (6.3.8)≤ 0,25 mm (u < 0,05 mm) under a force of about 4 % of F_g at the centre of strike
Coverage in accreditation scopes (read 15.11.2026)4 Polish calibration laboratories (5 records); 4 Czech

Standard

Standard number
PN-EN ISO 148-2:2017-02 (English version; implements EN ISO 148-2:2016 and ISO 148-2:2016 [IDT])
Title (PL)
Metale — Próba udarności sposobem Charpy'ego — Część 2: Sprawdzanie młotów wahadłowych
Title (EN)
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines

Step-by-step procedure

  1. Foundation and installation

    Documentation of the foundation mass (≥ 40 × mass of the pendulum), bolt torque, no vibration transmitted through the foundation (6.2).

  2. Framework

    Reference plane and axis of rotation (2/1 000, without a plane 4/1 000), free position of the pendulum, bearing play, clearance between hammer and framework (6.3.1–6.3.3).

  3. Pendulum relative to the test piece and anvils

    Striking edge within 2,5 mm of contact, plane of swing 90,0° ± 0,1°, contact over the full thickness, centre of the striker within 0,5 mm of the centre of the gap, axial play ≤ 0,25 mm (6.3.4–6.3.8).

  4. Further direct verification

    Pendulum, anvils and supports, and indicating equipment — according to 6.4–6.6 of the standard.

  5. Indirect verification

    Breaking of reference test pieces according to ISO 148-3 at the specified energy levels; bias and repeatability — according to clause 7 of the standard.

Required equipment and apparatus

EquipmentExampleIndicative price
Gauge for the pendulum position (6.3.4)Bar about 55 mm long with a 7,5 mm × 12,5 mm cross-section—
55 mm × 10 mm × 10 mm test piece with paper and carbon paper (6.3.6)Check of striker contact over the full thickness of the test piece—
Commercial measuring instruments (6.1)Dial gauges, micrometers, callipers — uncertainty estimated once by the producer—
Reference test pieces (clause 7)Prepared and characterized according to ISO 148-3, with certified energy K_R—

Frequently asked questions

Which standard describes this test?

The test is performed according to PN-EN ISO 148-2:2017-02 (English version; implements EN ISO 148-2:2016 and ISO 148-2:2016 [IDT]) — “Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines”.

How does this method work?

The pendulum impact machine is verified by two methods and complies with the standard only after both. Directly (statically) — by checking the foundation (mass ≥ 40 × mass of the pendulum, bolt torque, no vibration), the framework and position of the pendulum (levelness 2/1 000, striking edge within 2,5 mm of the test piece, plane of swing 90,0° ± 0,1°, centre of the striker within 0,5 mm of the centre of the gap, axial play ≤ 0,25 mm), the pendulum, supports, anvils and indicating equipment.

What is the measuring range and accuracy?

STATUS (PKN card, 15.11.2026): PN-EN ISO 148-2:2017-02 (English version, published 07-02-2017); implements EN ISO 148-2:2016 and ISO 148-2:2016; replaces PN-EN ISO 148-2:2009; Methods (clause 1): direct (static) and indirect (dynamic, reference test pieces according to ISO 148-3); compliance only after both; Energies (clause 3): K_T, K_P, K (KV₂, KV₈, KU₂, KU₈), K_calc, K_N, K_S, K_R; Foundation (6.2): mass ≥ 40 × mass of the pendulum; bolts torqued to the manufacturer's value; no external vibration.

How long does the test take?

The procedure comprises 5 steps. The standard does not give a duration for every stage — the laboratory's own procedure decides.

What equipment is required?

Gauge for the pendulum position (6.3.4), 55 mm × 10 mm × 10 mm test piece with paper and carbon paper (6.3.6), Commercial measuring instruments (6.1), Reference test pieces (clause 7).

Where is this test used?

Industrial pendulum impact machines with a 2 mm or 8 mm striker, used e.g. in tests according to ISO 148-1 (ISO 148-2:2016, clause 1); Machines of various nominal energies and designs (clause 1); Reference machines — verified according to ISO 148-3, not this part (clause 1); In accreditation scopes: 4 Polish calibration laboratories and 4 Czech.

Which laboratory can perform this test?

The test is performed by laboratories accredited to ISO/IEC 17025. On LabCoda you can find them by the standard number PN-EN ISO 148-2.

🔍 Find a laboratory performing this test