🧸 Safety of toys — flammability: flammable materials prohibited in all toys, toys to be worn on the head (beards, moustaches, wigs, masks, hoods), toy disguise costumes, toys intended to be entered and soft-filled toys, tests with a small source of ignition; PN-EN 71-2

Materials and polymers PN-EN 71-2

In short

Categories of flammable materials prohibited in all toys and requirements concerning the flammability of certain toys subjected to a small source of ignition. The test is performed according to PN-EN 71-2+A1:2025-11 (English version; implements EN 71-2:2020+A1:2025 [IDT]); STATUS (as of 20.11.2026): PKN cards: PN-EN 71-2+A1:2025-11 “Bezpieczeństwo zabawek -- Część 2: Palność” — English version (published 21-11-2025, 42 pages), KT 237 Articles for Infants and Young Children and Safety of Toys, implements EN 71-2:2020+A1:2025 [IDT], replaces PN-EN 71-2:2021-05 (English and Polish versions); the card gives no withdrawal date. PN-EN 71-2:2021-05 (Polish version, published 21-03-2025, 38 pages, implements EN 71-2:2020) — withdrawal date 21-11-2025, replaced by PN-EN 71-2+A1:2025-11 (English version). For the test result, the edition with A1 changes among other things the testing of masks (5.3), the range of allowable water hardness (5.4.1.1 c) and Figure 1 for the preparation of costume specimens (5.4.1.2.1) — according to the table of changes in the European foreword. At the publisher, EN 71-2:2020+A1:2025 has the status “Published” (iTeh catalogue card, published 11-06-2025). The procedure comprises 4 steps; it is used for: Toys to be worn on the head: beards, moustaches, wigs made from pile or flowing elements, masks, hoods, headdresses (clause 1, 4.2), Toy disguise costumes and toys intended to be worn by a child in play (clause 1, 4.3), Toys made of textiles, polymer sheets and films intended to be entered by a child (clause 1, 4.4).

At a glance

  • Standard: PN-EN 71-2+A1:2025-11 (English version; implements EN 71-2:2020+A1:2025 [IDT])
  • Category: Materials and polymers
  • Procedure steps: 4
  • STATUS (as of 20.11.2026): PKN cards: PN-EN 71-2+A1:2025-11 “Bezpieczeństwo zabawek -- Część 2: Palność” — English version (published 21-11-2025, 42 pages), KT 237 Articles for Infants and Young Children and Safety of Toys, implements EN 71-2:2020+A1:2025 [IDT], replaces PN-EN 71-2:2021-05 (English and Polish versions); the card gives no withdrawal date. PN-EN 71-2:2021-05 (Polish version, published 21-03-2025, 38 pages, implements EN 71-2:2020) — withdrawal date 21-11-2025, replaced by PN-EN 71-2+A1:2025-11 (English version). For the test result, the edition with A1 changes among other things the testing of masks (5.3), the range of allowable water hardness (5.4.1.1 c) and Figure 1 for the preparation of costume specimens (5.4.1.2.1) — according to the table of changes in the European foreword. At the publisher, EN 71-2:2020+A1:2025 has the status “Published” (iTeh catalogue card, published 11-06-2025).
  • Extremely flammable liquid (3.4): flash point < 23 °C, initial boiling point ≤ 35 °C
  • Highly flammable liquid (3.11): flash point < 23 °C, initial boiling point > 35 °C

Overview

WHAT THE STANDARD COVERS. According to clause 1 of EN 71-2:2020+A1:2025 the document specifies the categories of flammable materials prohibited in all toys and requirements concerning the flammability of certain toys when subjected to a small source of ignition. The test methods of clause 5 determine the flammability of toys under the particular test conditions specified; their results are not an overall indication of the fire hazard of toys or materials with other sources of ignition. In addition to general requirements for all toys, the standard gives specific requirements and test methods for: toys to be worn on the head (beards, moustaches, wigs etc. made from pile or flowing elements, masks, hoods, headdresses — excluding paper and paperboard hats without embellishments or attachments), toy disguise costumes and toys intended to be worn by a child in play, toys intended to be entered by a child constructed from textiles and/or polymer sheets and films, and soft-filled toys. Additional requirements for electric toys are in EN IEC 62115.

ACCORDING TO THE TEXT OF EN 71-2:2020+A1:2025 (English version in the SIST EN 71-2:2021+A1:2025 edition; publisher's sample: European foreword, introduction, clauses 1–3). The document was prepared by CEN/TC 52 “Safety of toys”; CEN approved EN 71-2 on 28 September 2020 and amendment A1 on 7 April 2025. The consolidated edition supersedes EN 71-2:2020; national standards were to implement it by December 2025 at the latest, and conflicting national standards are to be withdrawn by June 2026 at the latest. Changes introduced by A1: definitions of cosmetic kit, gustative game and olfactory board game (3.3, 3.10, 3.15) to clarify 4.1; clarification on highly flammable and flammable liquids in chemical toys and alignment with EN 71-5:2015 and EN 71-13:2021+A1:2022 (4.1); how to test masks so that openings do not affect the test flame (5.3); corrected references to A.7 and A.8 (5.3, 5.4); wider range of allowable water hardness (5.4.1.1 c); improved Figure 1 (5.4.1.2.1); new Annex B (risk assessment of toy disguise costumes and toys to be worn on the head). Normative references: EN ISO 2431:2019 (flow time by use of flow cups) and EN ISO 6941:2003 (flame spread on vertically oriented textile specimens). The relationship with the essential requirements of Directive 2009/48/EC is described in Annex ZA.

DEFINITIONS (clause 3). Extremely flammable liquid — flash point < 23 °C and initial boiling point ≤ 35 °C; highly flammable liquid — flash point < 23 °C and initial boiling point > 35 °C; flammable liquid — flash point from 23 °C to 60 °C; flammable gas — having a flammable range with air at 20 °C and 101,3 kPa (all according to Regulation (EC) No 1272/2008). Highly flammable solid — behaves in fire like celluloid (cellulose nitrate): ignites instantaneously after brief contact with a flame and burns very rapidly. Flaming debris — material that becomes detached from the specimen and continues to flame as it falls; molten drips — falling droplets of molten material; surface flash — rapid spread of flame over the surface without ignition of the base structure. Flowing elements — loosely hanging elements that flow like hair and continue to move after the head is rotated and stopped (e.g. imitation hair, ribbons, paper or cloth strands). Soft-filled toy — with soft body surfaces, filled with soft material, readily compressed by hand. Toy disguise costume — costume worn by a child for imaginative play as a character; garments for children under 12 months are not toy disguise costumes.

WHAT WE DO NOT GIVE HERE. The sample ends at definition 3.18. We do not reproduce the requirements of clause 4 or the test procedures of clause 5 (burner, conditioning, test flame, burner position, preparation and holding of costume specimens) — we only know their titles from the table of contents.

STATUS (as of 20.11.2026). PKN cards: PN-EN 71-2+A1:2025-11 “Bezpieczeństwo zabawek -- Część 2: Palność” — English version (published 21-11-2025, 42 pages), KT 237 Articles for Infants and Young Children and Safety of Toys, implements EN 71-2:2020+A1:2025 [IDT], replaces PN-EN 71-2:2021-05 (English and Polish versions); the card gives no withdrawal date. PN-EN 71-2:2021-05 (Polish version, published 21-03-2025, 38 pages, implements EN 71-2:2020) — withdrawal date 21-11-2025, replaced by PN-EN 71-2+A1:2025-11 (English version). For the test result, the edition with A1 changes among other things the testing of masks (5.3), the range of allowable water hardness (5.4.1.1 c) and Figure 1 for the preparation of costume specimens (5.4.1.2.1) — according to the table of changes in the European foreword. At the publisher, EN 71-2:2020+A1:2025 has the status “Published” (iTeh catalogue card, published 11-06-2025).

Method principle

The toy or part of it is exposed to a small source of ignition — the test flame from a burner in a specified position, under the conditioning and in the test chamber of clause 5 — and its behaviour (ignition, flame spread, flaming debris, molten drips, surface flash) is assessed against the requirements of clause 4 for the given type of toy; materials of the prohibited categories shall not be used in toys at all.

Applications

Key parameters

ParameterValue
STATUS (as of 20.11.2026)PKN cards: PN-EN 71-2+A1:2025-11 “Bezpieczeństwo zabawek -- Część 2: Palność” — English version (published 21-11-2025, 42 pages), KT 237 Articles for Infants and Young Children and Safety of Toys, implements EN 71-2:2020+A1:2025 [IDT], replaces PN-EN 71-2:2021-05 (English and Polish versions); the card gives no withdrawal date. PN-EN 71-2:2021-05 (Polish version, published 21-03-2025, 38 pages, implements EN 71-2:2020) — withdrawal date 21-11-2025, replaced by PN-EN 71-2+A1:2025-11 (English version). For the test result, the edition with A1 changes among other things the testing of masks (5.3), the range of allowable water hardness (5.4.1.1 c) and Figure 1 for the preparation of costume specimens (5.4.1.2.1) — according to the table of changes in the European foreword. At the publisher, EN 71-2:2020+A1:2025 has the status “Published” (iTeh catalogue card, published 11-06-2025).
Extremely flammable liquid (3.4)flash point < 23 °C, initial boiling point ≤ 35 °C
Highly flammable liquid (3.11)flash point < 23 °C, initial boiling point > 35 °C
Flammable liquid (3.8)flash point ≥ 23 °C and ≤ 60 °C
Flammable gas (3.7)flammable range with air at 20 °C at 101,3 kPa
Hanging elements 50 mm (4.2.2, 4.2.3)separate requirements and tests for beards, moustaches and wigs protruding 50 mm or more, or less than 50 mm, from the surface of the toy
Toy disguise costume (3.18)garments for children under 12 months are not toy disguise costumes

Standard

Standard number
PN-EN 71-2+A1:2025-11 (English version; implements EN 71-2:2020+A1:2025 [IDT])
Title (PL)
Bezpieczeństwo zabawek — Część 2: Palność
Title (EN)
Safety of toys — Part 2: Flammability

Step-by-step procedure

  1. Classification of the toy

    Determine whether the toy belongs to the categories covered by specific requirements: worn on the head, costume, toy to be entered, soft-filled toy (clauses 1, 4).

  2. General requirements

    Check that the toy contains no prohibited materials, including flammable liquids and solids as defined in 3.4–3.12 (4.1).

  3. Flammability test

    Test with the test flame appropriate for the type of toy (5.2–5.5); the procedure is not given — it is outside the sample.

  4. Assessment

    Assessment of the results against the requirements of clause 4 for the given type of toy (5.4.6).

Required equipment and apparatus

EquipmentExampleIndicative price
Test burner (5.1.1)Small source of ignition for flammability tests; dimensions and gas not given — outside the sample—
Test chamber (5.1.2)Conditioning and testing of specimens in the chamber; conditions not given — outside the sample—

Frequently asked questions

Which standard describes this test?

The test is performed according to PN-EN 71-2+A1:2025-11 (English version; implements EN 71-2:2020+A1:2025 [IDT]) — “Safety of toys — Part 2: Flammability”.

How does this method work?

The toy or part of it is exposed to a small source of ignition — the test flame from a burner in a specified position, under the conditioning and in the test chamber of clause 5 — and its behaviour (ignition, flame spread, flaming debris, molten drips, surface flash) is assessed against the requirements of clause 4 for the given type of toy; materials of the prohibited categories shall not be used in toys at all.

What is the measuring range and accuracy?

STATUS (as of 20.11.2026): PKN cards: PN-EN 71-2+A1:2025-11 “Bezpieczeństwo zabawek -- Część 2: Palność” — English version (published 21-11-2025, 42 pages), KT 237 Articles for Infants and Young Children and Safety of Toys, implements EN 71-2:2020+A1:2025 [IDT], replaces PN-EN 71-2:2021-05 (English and Polish versions); the card gives no withdrawal date. PN-EN 71-2:2021-05 (Polish version, published 21-03-2025, 38 pages, implements EN 71-2:2020) — withdrawal date 21-11-2025, replaced by PN-EN 71-2+A1:2025-11 (English version). For the test result, the edition with A1 changes among other things the testing of masks (5.3), the range of allowable water hardness (5.4.1.1 c) and Figure 1 for the preparation of costume specimens (5.4.1.2.1) — according to the table of changes in the European foreword. At the publisher, EN 71-2:2020+A1:2025 has the status “Published” (iTeh catalogue card, published 11-06-2025).; Extremely flammable liquid (3.4): flash point < 23 °C, initial boiling point ≤ 35 °C; Highly flammable liquid (3.11): flash point < 23 °C, initial boiling point > 35 °C; Flammable liquid (3.8): flash point ≥ 23 °C and ≤ 60 °C.

How long does the test take?

The procedure comprises 4 steps. The standard does not give a duration for every stage — the laboratory's own procedure decides.

What equipment is required?

Test burner (5.1.1), Test chamber (5.1.2).

Where is this test used?

Toys to be worn on the head: beards, moustaches, wigs made from pile or flowing elements, masks, hoods, headdresses (clause 1, 4.2); Toy disguise costumes and toys intended to be worn by a child in play (clause 1, 4.3); Toys made of textiles, polymer sheets and films intended to be entered by a child (clause 1, 4.4); Soft-filled toys (clause 1, 4.5); General requirements for all toys — prohibited flammable materials, flammable liquids in chemical toys (4.1).

Which laboratory can perform this test?

The test is performed by laboratories accredited to ISO/IEC 17025. On LabCoda you can find them by the standard number PN-EN 71-2.

🔍 Find a laboratory performing this test