Union authorisation for a family of hydrogen peroxide disinfectants (36.68–50.15 %): closed-loop cleaning, drinking water systems and room fogging; re-entry without respiratory protection only below 1.25 mg/m³ H₂O₂ in air
Commission Implementing Regulation (EU) 2026/2511, published on 13 November 2026, grants CID LINES NV Union authorisation No EU-0036243-0000 for the biocidal product family ‘Hydrogen Peroxide based family – CID LINES NV’ of product types 2 (disinfectants not intended for direct application to humans or animals) and 4 (food and feed area). The authorisation is valid from 3 December 2026 to 30 November 2036.
- Composition: hydrogen peroxide (CAS 7722-84-1) 36.68–50.15 % (w/w), soluble concentrate (SL). The family has two sub-groups (meta SPCs): with 50.15 % — 12 trade names, including Cid Clean, Hydro Pur and Peroxi Des, and with 36.68 % — 5 names, including Peroxides 35, Agri Peroxi and Air Des 100. Target organisms: bacteria and yeasts, and in drinking water systems and fogging also fungi.
- Closed-loop cleaning-in-place in food production and processing plants, including food and feed silos: a 5 % (v/v) product solution after prior cleaning of the surfaces, circulated for 60 minutes at a temperature above 40 °C, then rinsed with drinking water; 1–2 applications per day, professional users only.
- Drinking water systems in food establishments, taken out of use during disinfection: a 9 % (v/v) product solution at room temperature after the system has been cleaned and flushed; surfaces are to stay wet for 6 hours; before the system is put back into use, the absence of H₂O₂ is checked with a test strip at the last tapping point.
- Cold fogging of rooms larger than 4 m³ (non-porous surfaces, also industrial areas and public buildings): a 14 % H₂O₂ (w/w) solution, dose 40 ml/m³, particle size 20 μm, relative humidity 50–75 %, contact time 3 hours, no rinsing. Biological and chemical verification is carried out for each room (or a “standard” room in the building) with the devices to be used.
- Air measurement decides re-entry: without respiratory protective equipment only below 0.9 ppm (1.25 mg/m³) — the European reference value for hydrogen peroxide, unless the national value is lower; during disinfection only in an emergency or to reactivate the ventilation, below 36 ppm (50 mg/m³) and with equipment of assigned protection factor APF 40. The summary gives thresholds for choosing equipment: APF 4 at 1.25–5 mg/m³, APF 10 at 5–12.5 mg/m³, APF 20 at 12.5–25 mg/m³ and APF 40 at 25–50 mg/m³.
- The Regulation enters into force on the twentieth day following its publication (3 December 2026). The application was submitted to the European Chemicals Agency on 12 January 2017, the evaluation was carried out by the competent authority of the Netherlands, and the Agency’s opinion dates from 27 November 2025 (ECHA/BPC/512/2025).